Board power

USB Micro B Connector Board Description Micro USB Interface Board Power Switch Interface provides the best and convenient way to add USB port to your project with hassle free mounting on and standard PCB board. The breakout board provides a Micro-B USB connector's VCC, GND, ID, D- and D+ pins on a 0.1" pitch header. Features Brand new, High quality and Fast Shipping Color: Blue Size: 150mm x 200mm Pins: VCC, GND, ID, D- and D+ Ideal for an un-regulated 5V supply up to 100mA for any project. Assembled and Tested Protected with ESD pouch Package Includes 1 x USB Micro B Female Breakout Board 1 x 5 pin 0.1 pitch mounting header Shipment All India Free Shipping. We use reliable shipping partners such as BlueDart, DHL, Professional Couriers, DTDC, Aramex etc. The product will be shipped on the same day if the payment has been cleared before 2:00 P.M on weekdays. Next day shipping on Weekends. On receipt of the product, kindly acknowledge the same immediately on Feedback We strive to win 5 star feedback from our esteemed customers. If you are un-satified with the product, please talk to us (contact.saidaikar@gmail.com) before leaving negative feedback. Your feedback is very very important for us to grow our business on , so please do leave feedback. Thank you for your buisness

840 Point Normal Bread Board Power Supply Module  Good Quality @ Lowest Price Breadboard power supply module for normal 840 Point GL12 Breadboards as shown

Power Distribution Board (PDB panel) is a component of an electrical system that Distributes electrical power into a subsidiary circuit by a circuit breaker and switch fuse unit. Power Distribution Board also is known as the power distribution board panel of the electrical panel. In addition, equipped complete with all types of the required number of air circuit breakers, switch fuse unit, contactor, protective relays, fuses, meters, indicating lamps, push buttons, busbar, etc.

The power factor correction is a technique of increasing the power factor of a power supply. Switching power supplies without power factor correction draw current in short, high-magnitude pulses. Displacement PF is defined as the cosine of the angle between fundamental voltage and fundamental current of the load. The presence of Harmonics increases the RMS current and voltage relative to their respective fundamental values. This increases the KVA of the Load. The Power Factor correction capacitor taking into account the effect of the Harmonics is called the true power factor.. True PF ≤ Displacement of the factor by which Displacement PF is related to the True PF is called the Distortion PF What is Power Factor Correction Capacitor The power factor of your installations can be improved by the placement of power factor capacitors where they work as reactive generators of power. This is required when you notice that the apparent current is superior to the working current that you are getting. Only Power Factor Correction Capacitors can improve Displacement in Power Factor The application of shunt capacitors to industrial power systems has several benefits. Among these are: Benefit 1 — Reduce Power Bills Benefit 2 — Gains in System Capacity Benefit 3 — Improve Voltage Conditions Benefit 4 — Reduce Line Losses Listed below are various installation options. Care must be taken in sizing and placing power factor correction capacitors. Leading power factor, greater than 100%, must be avoided. The capacitors should only be online when the load requires kVAR and disconnected when the load is reduced. Where do you need to install these capacitors? You may be thinking about where to install these capacitors for having the best result. We not only supply you with the best capacitors but also help you in the proper installation of those. The ideal places to use these capacitors are: If you find that load that is applied is continuous in nature and it is stable, then the capacitors are placed in the main LV distribution board that you have. There are various advantages that you can have from such installation as: Reduction in penalties regarding traffic for the consumption of kvars which is excessive It helps in reduction of KVA demand for apparent current. It helps in making the supply transformer free so that it can take up more load. If you have a huge installation where the load/time pattern differs from sector to sector, then the capacitors need to be fitted with the bus bars that are present at the local board for distribution. The advantages that can be achieved are: Reduction in penalties regarding traffic for the consumption of kvars which is excessive It helps in reduction of KVA demand for apparent current. It helps in making the supply transformer free so that it can take up more load. The supply cable size can be reduced There will be a reduction in the loss that happens in the cables. If you see that the power that is used by the motor is significant if compared with the power that you have in the installation, then these capacitors are connected to the terminals to have the desired result. The advantages that can be achieved in such a case are: Reduction in penalties regarding traffic for the consumption of kvars which is excessive Power Factor Correction helps in reduction of KVA demand for apparent current. Cable size and loss in the cable can also be reduced by such implementation. If you wish to have such power factor correction capacitors, then you need to have it from Power Matrix Solutions Pvt. Ltd.

PCB for High power output PA Series Amplifier, provides superb & Power full sound quality. With  2SCSA output devices the amp will put out close to 400 WATTS @ 8 OHMS and 800 Watt @ 4 OHMS.  Size 94 mm X 260 mm. FR4 Glass epoxy 1.6 mm THK Board 70  Microns copper. Included Schematic & BOM. Qty- 02 Nos. (TWO ONLY) PCB. FOR STEREO Note:- Amplifier Output Power 400 Watt @ 8 Ohms and 80 Watt @ 4 Ohms. We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Rs. only) Contact details:- E-Mail: Mob. No.

EADPS01 power supply board uf/63v X 4 SAMWHA capacitors 35amps bridge rectifier On board fuse protection LuX pins for easy connections High grade glass epoxy PCB Suited for all types of amplifiers PCB size - 13.5mm X 80mm

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit): All resistors (1% metal film) Power resistors Faston connectors Silpad 400 insulators Silver Mica compensation capacitors MJE drivers MJL output transistors (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors Main Heat Sink (100 mm x 182 mm x 19 mm - 1 No.) and Heat Sink for LME No. Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 5 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail:

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 7 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Branded components): All resistors (1% metal film)  Power resistors (CRC) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) Main Heat Sink required (100 mm x 260 mm x 32 mm - 1 No.) - NOT INCLUDED. Note:- Amplifier Output Power 350 Watt @ 8 Ohms and 550 Watt @ 4 Ohms (Power supply: Volt 7 Amps) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors,) Rs./- Shipping charge extra. Contact details:- E-Mail: Mob. No.:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  2SCSA output devices. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit without Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors (Manufacturer: Toshiba ) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 250 Watt @ 8 Ohms and 400 Watt @ 4 Ohms (Power supply required: Volt 6 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Contact No.: Mob. No. 

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 8 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

Brand new Quickie Pulse 5 Power Wheelchair purchased from USA in Jul 16. Used for 2 months only. Ideal for anyone who is mobility impaired. Features Top Speed: 5.00 mph Turning Radius: 18.00" Ground Clearance: 3.00" Battery Charge Distance: 19.00 miles Batteries: 22 NF Batteries Included: Yes Battery Charger Type: Off Board Drive Wheel Size: 13" Rear Caster Size: 6" Controller Type: Joystick Tire Type: Solid Seat Widths: 16" Seat Depths: 18" Mid wheel drive 300 lbs. weight capacity Semi-recline and fold-down backrest Industry standard non-expandable electronics Flexible suspension system for optimal outdoor performance Fully adjustable seat size, legrest placement, and armrest width

This is L293D based H-Bridge motor driver board for driving DC motors and is ideal for robotics applications. PTR CONNECTORS FOR EASY CONNECTIONS USER ACCESSIBLE MOTOR ENABLE PINS FACILITY ON BOARD V POWER REGULATOR, NO NEED TO GIVE EXTERNAL 5v POWER SUPPLY ON BOARD POWER LED AND POWER ON OFF SWITCH WIRE CONNECTOR FOR INPUT SIGNAL

Specifications: Breadboard power supply module, with 5 V, 3.3 V output voltages Apply to MB102 Standard breadboard Input voltage: V (DC) or 5V USB power supply Output voltage: 3.3V and 5V can switch over Maximum output current: Input voltage ON/OFF switch Independent control of upper and Lower Bread Board Power Rails. Can switch over to 0 V, 3.3 V, 5 V using jumpers on any rail On-board Two sets of 3.3V, 5V DC output pins, convenient external lead use Package contents: 1 x  MB102  Bread Board  3.3V & 5V  Power Supply Module

Product Description: 20 Digital Input / Output. Tx, Rx, D2~D13, A0~A5. 8 Analogue Inputs. A0~A7. 6 PWM Ports. D3, D5, D6, D9, D10, D11. Arduino-compatible Board. ATmega328 running at 16MHz with external resonator (0.5% tolerance) USB connection off board (Supports Serial Download) Supports auto-reset Max 150mA output Over current protected Reverse polarity protected DC input 5V up to 12V On board Power and Status LEDs Dimensions（Long）33mm *（wide）18 mm *（high）6mm Package Content: 1x Arduino Pro Mini Atmega 328P board  3PCS Gilded Pin

Why to buy  Pro Mini ATMEGA168  ? When you get Pro Mini Atmega328P. 32KB of Program Memory + 2KB SRAM + Byte EEPROM Product Description: 20 Digital Input / Output. Tx, Rx, D2~D13, A0~A5. 8 Analogue Inputs. A0~A7. 6 PWM Ports. D3, D5, D6, D9, D10, D11. Arduino-compatible Board. ATmega328 running at 16MHz with external resonator (0.5% tolerance) USB connection off board (Supports Serial Download) Supports auto-reset Max 150mA output Over current protected Reverse polarity protected DC input 5V up to 12V On board Power and Status LEDs Dimensions（Long）33mm *（wide）18 mm *（high）6mm Package Content: 1x Arduino Pro Mini Atmega 328P board  3PCS Gilded Pin

A 3.3V and 5V Breadboard Power Supply Module with series diode, polarity reversal protection. The module can take 6.5V to 12V input and can produce 3.3V and +5V. Can also output 5V on USB connector and can also take input through USB connector. Features: Breadboard power supply module, with 5 V, 3.3 V output voltages Apply to MB102 Standard breadboard Input voltage: V (DC) or 5V USB power supply Output voltage: 3.3V and 5V can switch over Maximum output current: Input voltage ON/OFF switch Independent control of upper and Lower Bread Board Power Rails. Can switch over to 0 V, 3.3 V, 5 V using jumpers on any rail. On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use. Connectors: 1x Barrel 5mm Connector (center +ve) for Input Power 1x USB connector for 5V input or 5V output 4x 2Pin Headers pointing downward for 3.3V or 5V output 1x 2×4 Header for 3.3V and 5V output 2x 1×4 selection jumper for 3.3V/OFF/5V Please note:  This item only comes with a Power Supply Module, Breadboard is not included Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Power Point Presentation Integrative Presenter Pen Usb RF Presenter Specifications: Ideal for professors, business professionals, lecturers, teachers, students.  Red laser pointer - Specs: Wavelength=650nm, Output=1mw).  Page up and down function. USB receiver is plug and play - no driver required.  Laser distance: Over 200m. Control distance: Over 15m. Padded carrying case included for the wireless laser remote and USB receiver.  Remote powered by battery (included). Supports MS Word, MS Excel, MS Powerpoint,  System support: Windows Vista/XP//Me/98. •  Primary Function: Wireless Presentation Laser Pointer + USB Receiver •  Color: Black •  On Board Buttons:  - Laser ON/OFF  - Page Scroll UP  - Page Scroll Down •  Laser Class: Class II •  Frequency: MHz •  Control Distance: Approx. 15 meters •  Working Voltage: 3V •  Laser Wavelength: 650nm •  1x AAA battery •  Maximum Output Wattage: •  Compatability USB Ports: USB 1.1, USB 2.0, USB 3.0 •  Operating System Compatability: Windows 98 / SE / ME / / XP / Vista / Windows 7 / MAC OS •  Certification: FCC, CE •  Dimensions:  - USB Dongle - L:30 x W:22 x D:10 (mm)  - Laser Pointer - L:130 x W:22 x D:13 (mm) Shipping Policy ·          Product will be Dispatch within 2-3 Days once payment is received through paisapay. ·         No Shipping will be carried out if the payment is awaiting

LMTF AMP board KIT+Rectifier filter power KIT + Tone control Kit Introduction:   LM is a single channel high-performance Stereo power amplifier IC produced by National Semiconductor Corporation(NS).The maximum continuous output power is up to 60W.From the Introduction till now,it's widely loved by vast audio fans     This power amplifier adopts power board & amplifier board Independent design,for the amplifier part,each channel shares one circuit board,every set includes one power board & 2 single channel power amplifier boards.  All the components on the board are carefully selected,uF/63V capacitors as filter capacitors,35A large current rectifieer bridge,can ensure the powerboard long-term full load working.Other capacitors choose Epcos, Keltron, etc. famous brand capacitors.1% copper pin film resistors. The PCB board adopts single side circuit board, Black boars,reasonable layout design,looks beautiful & generous. In Package  2 X LM mono boards 1 X Hi Fi Tone control board 1 X uf 63v power supply board 1 X 15v regulated power supply board 

LMTF AMP board KIT+Rectifier filter power DIY KIT Introduction:   LM is a single channel high-performance Stereo power amplifier IC produced by National Semiconductor Corporation(NS).The maximum continuous output power is up to 60W.From the Introduction till now,it's widely loved by vast audio fans     This power amplifier adopts power board & amplifier board Independent design,for the amplifier part,each channel shares one circuit board,every set includes one power board & 2 single channel power amplifier boards.  All the components on the board are carefully selected,uF/63V capacitors as filter capacitors,35A large current rectifieer bridge,can ensure the powerboard long-term full load working.Other capacitors choose Epcos, Keltron, etc. famous brand capacitors.1% copper pin film resistors. The PCB board adopts single side circuit board, Black boars,reasonable layout design,looks beautiful & generous.

Product Description Miniature digital power amplifier board 2 * 3 w class D power amplifier board high 2.5 ~ 5 v can be USB power supply Shipped via powership. Fast ship - Bluedart/Fedex/DHL/Aramex Features: Miniature digital power amplifier board 2x3w class D power amplifier board, Can work on USB power supply. Good noise suppression Input audio should be via sheilded wire Dual channel stereo output 3 w + 3 w power Works with 5v power supply can directly drive 4 Ω/8 Ω small speakers big output power, sound quality is good. Unique without LC filter class D digital power board can use computer USB power supply directly Double panel wiring, super mini design, can easily fit

Package Contents   1 x PIC development Board with Free USB cable and CD containing software examples.   External Power supply NOT Included.    Contact Details   Have any Queries, Feel free to contact us anytime   Ph: +91-   or email us:   or contact us through by clicking "Ask seller a question"   Feedback Details   In case, you are not satisfied with the item or have any questions or complaints, please contact us before leaving a Feedback.   Leaving Negative or Neutral Feedback will not solve a problem,   We are always willing to solve the problems of buyers.   "Your feedback is very important for us to grow our business on , so please do leave positive feedback"    The PIC development board is a microcontroller board based on the PIC16F877. It has 33 input/output pins and two PWM outputs, 8 (10 bit) analog inputs, a works upto 20 MHz speed. A USB connection is available for programming and UART (communication with the PC), an external power jack is provided for high current motor applications etc. A Reset button is present. A 4 x 4 key matrix is provided for keyscan applications. A 16 x 2 LCD with programmable backlight is provided. A Piezo Buzzer is present. A 4 digit 7 segment common cathode display is populated for display multiplexing example. A onboard potentiometer is provided on one analog channel. A coin cell battery backed DS (RTC) is present on one of the I2C channel. An optional SPI external EEPROM (not provided with the board) can be mounted by the user for SPI memory. A ULN based stepper motor interface is present.   The Board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. FEATURES AND USAGE The maximum length and width of the Board is approx 7 inch by 5.5 inches. Four PCB studs allow the board to be attached to a surface or act like a support stand. All the ports of the microcontroller are available as edge connectors on the right side of the board on a standard 100 mil spacing. The board can also take most of the 40 Pin DIP PIC18 series microcontrollers. An External programmer may be needed

Description Single Channel 12V Relay Board: A relay is an electrically operated switch. Current flowing through the coil of the relay creates a magnetic field which attracts a lever and changes the switch contacts. The coil current can be on or off so relays have two switch positions. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The board has ONE relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by the RED Led. This is a Single channel relay board operates on 12V. Can be used directly to control 240V power appliance from most of the microcontrollers and other control system circuits. Perfect for switching 240V appliances like lights, fans, etc. The board has a high quality relay, which can handle a maximum of 10A @ 120V or 7A @ 240V AC. Each Relay has three connections - Common - C, Normally Open-NO, Normally Closed-NC brought out to 3 pin screw terminals which makes it easy to make and remove connections. The board has a power indication and a relay status LED to ease debugging. Power input and relay control signals are brought to header pins on the board. Features: Selectable Port Input Mounting Supports Provided Relay Switching Output Suitable for 7A @ 250Vac or 10A @ 120Vac LED Indication of Relay ON. Power Indication LED. Direct input from 3-5V Microcontroller for relay control. Output terminal for relay contacts. Provision of male header for wire connection. Powered from external 12V or from male header. Note: It is important that microcontroller share ground with relay board along with other control signals else it will not able to control relay. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description Four Channel 12V Relay Board: A relay is an electrically operated switch. Current flowing through the coil of the relay creates a magnetic field which attracts a lever and changes the switch contacts. The coil current can be on or off so relays have two switch positions. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The board has FOUR relay which works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by the RED Led. This is a 4 channel relay board operates on 12V. Can be used directly to control 240V power appliance from most of the microcontrollers and other control system circuits. Perfect for switching 240V appliances like lights, fans, etc. The board has a high quality relay, which can handle a maximum of 10A @ 120V or 7A @ 240V AC. Each Relay has three connections - Common - C, Normally Open-NO, Normally Closed-NC brought out to 3 pin screw terminals which makes it easy to make and remove connections. The board has a power indication and a relay status LED to ease debugging. Power input and relay control signals are brought to header pins on the board. Features: Selectable Port Input Mounting Supports Provided Relay Switching Output Suitable for 7A @ 250Vac or 10A @ 120Vac LED Indication of Relay ON. Power Indication LED. Direct input from 3-5V Microcontroller for relay control. Output terminal for relay contacts. Provision of male header for wire connection. Powered from external 12V or from male header. Note: It is important that microcontroller share ground with relay board along with other control signals else it will not able to control relay. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

With this board you can develop and prototype with ATMEGA16/ATMEGA pin) microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User buttons and status LEDs. The bridge rectifier allow this board to be powered with both AC and DC power supply adapters.   FEATURES AVR Development Board for Atmel ATMEGA ISP Socket for Flashing On board Regulated Power Supply 5v,12v supplys Easy to test with Burg Connecters wires An RS232 Serial Port 7Seg Mulitplexed Display DC Power Supply Connector(12v Ac or Dc) READY INTERFACE For LCD display 2linex16Character 24Cxx (I2C) (EEPROM) RTC (DS LED array Matrix Key Pad 4 Interrupt Switches +12v Relay (one) Package Content   AVR Development Board (WITH CHIP MAX232) Burg Connecters 20 Nos Female to Female.

Positive Power Supply Board - 5V Description Positive power supply board. Its basically takes an input of 7-20V AC or DC and outputs a constant voltage of 5V. It can supply a maximum of 1A of current at 5V.   The board comes with appropriate rectification, filtering circuit, a power indication LED and mounting holes for easy mounting.   The Power Supply Mini Board is the ideal solutions, providing a postive supply at constant out for projects & systems etc.     Feature Suitable for 7-20V AC/DC input with PCB Terminals Power LED for Outputs +5V Output Termination Points Suitable for use with most +5V Microcontrollers

Variable Power Supply Board - 1.5V to 12V Description Variable power supply board. Its basically takes an input of V AC or DC and outputs a voltage between 1.5V to 12V. It can supply a maximum of 1A of current at 12V.   The board comes with appropriate rectification, Variable resistor/Preset for output voltage setting, filtering circuit, a power indication LED and mounting holes for easy mounting.   The Power Supply Mini Board is the ideal solutions, providing a postive supply at constant out for projects & systems etc.     Feature Suitable for V AC/DC input with PCB Terminals Power LED for Outputs Variable Preset for different output voltage selection. 1.5V to 12V Output Termination Points 60 x 50 mm PCB size   Powered by Turbo Lister

http://acdc-adapter.com/asus-ve205-vw245h-4h0uh02a00-4h0uh02a01-power-supply-board-p-35895.html Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board larger image $29.99 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $26.99 5 - 9 $25.49 10 - 19 $23.99 20 - 199 $22.49 200 + $21.59 Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number: 4H.0UH02.A00 4H.0UH02.A01 Compatible model: Asus VE205 VW245H

http://acdc-adapter.com/genuine-samsung-bn4400261b-la32b530p7r-power-supply-board-p-35849.html Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board larger image $75.55 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $67.99 5 - 9 $64.22 10 - 19 $60.44 20 - 199 $56.66 200 + $54.40 Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Part Number: BN44-00261A BN44-00261B H32F1_9DY Compatible Model : Samsung LA32B530P7R

http://acdc-adapter.com/acer-al1715-al1912-power-supply-board-ar577-vp583-al1914-p-35970.html Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 larger image $29.99 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $26.99 5 - 9 $25.49 10 - 19 $23.99 20 - 199 $22.49 200 + $21.59 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number:AR577 VP-583 AL1914 Compatible model:Acer AL1715 AL1912