Custom 50mm hand made

Beautiful custom, hand made guitar by luthier Erisa Neogy in Auroville. This is the first of two custom guitars that were made for me. This guitar is basically a strat with HSS config pickups, fixed bridge and Piezo electronics for realistic, studio quality acoustic guitar sounds. Specifications Body - Red Cedar and Acacia top Neck - Venge  Neck dimensions - 24.5 inch scale length, 22 frets Fretboard - Satinwood, compound radius with ebony dot inlay Nut    -    Bone Tuners - Grover Rotomatic mini locking tuners Neck pickup - Fender Custom Shop fat 50s Middle pickup - Fender Custom shop 69s Bridge   -    DiMarzio AT-1 Andy Timmons signature humbucker with coil splitting at tone knob Pickup switch -  5 way Megaswitch Strap buttons  - Schaller strap locks Bridge   -  Hipshot fixed bridge, original saddles replaced with Graphtech Piezo saddles Finish   -  Transparent, nitro cellulose   Piezo Specs Graphtech self lubricating piezo saddles Graphtech acousti-phonic preamp Quick switch to change from magnetic pickups to piezo pickup. Please note...  I'm selling this amazing guitar because I dont use it much after my 2nd custom guitar was built. This guitar took a lot of time, effort and research to build. If you are interested in buying this guitar please make sure you know and appreciate the value of a fine, handmade instrument before contacting me for a negotiation. If you would like to see more pics, get in touch and I will email them to you. I would also appreciate if you could spread the word about this guitar.  Willing to negotiate provided the buyer isn't asking for a rediculously low price Thanks!

Russian projection lens, 50mm 1.2 Aperture. Chepest 1.2 lens you can find. Can be used with custom made helicoid or DIY project lens on modern mirror lesss cameras.  Very  thin depth of filed. Optically

Neewer Dedicated Hand Grip Quick Release L-plate Bracket for Canon EOS-5D Mark III /BG-E11 with Battery Grip Compatible Features: andnbsp;F5D3L-G, FITTEST Brand Made L-Plate for Canon EOS-5D Mark III with optional Canon BG-E11 battery grip. 5D3 L-Plate! andnbsp;Custom made one-piece bracket machined from light weight T651 Aluminum andnbsp;Allows full access to rubber side hatches. andnbsp;Allows full use of the remote switch andnbsp;20mm wide enough allows use of any camera strap. Specification: andnbsp;Weight: 133g andnbsp;Color: Black IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Dedicated CSC Camera Hand Grip Quick Release Plate for Olympus OM-D E-M5 Features: Custom made professional hand grip plate for Olympus OM-D E-M5 cameras Excellent handling performance when mounted with OM-D & E-M5; Light weight T651 Aluminum of only 110g; Black hard anodized finish against corrosion and abrasion; Allows full access for battery hatch cover and all cable interface; Allows full angel for the rotating screen; IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Dedicated CSC Camera Hand Grip Quick Release Plate for Fuji X100 X100S with Arca Compatible andnbsp;Features: andnbsp;andnbsp;andnbsp;andnbsp; Fully detachable design: when assembled, it is a camera hand grip and L-plate, dismount the grip and get an Arca Swiss compatible L bracket, again dismount the vertical plate you get a quick release base plate. The unit is compatible with any Arca Swiss standard clamps/ ball heads. Custom made for FUJI X100, X100S cameras, allowing full access for battery hatch cover and all cable interface Specifictions: Material:andnbsp; precision machined from light weight T651 Aluminum Black hard anodized finish Size: mm Weight: 120g IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Black Metal Quick Release L-Plate Bracket Hand Grip Camera Grip for Olympus OM-D E-M10 Fits Arca-Swiss Standard Features: CNC machined from light weight aircraft grade aluminum. Satin Anodized Surface - Provides improved abrasion and corrosion resistance. Both vertical and horizontal plate with Arca-Swiss standard dovetail groove. Custom made for a perfect fit with the Olympus OM-D E-M10 camera body. Compatible with Arca Swiss, Really right stuff (except lever-release clamp), Wimberley, Jobu Design, Kirk Enterprises, Markins, Giottos, Benro, Feisol, Novoflex etc. Allowing full access for battery hatch cover and all cable interface. Change quickly from landscape to portrait mode without adjusting your setup. Note: Camera not included. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Black Metal Quick Release L-Plate Bracket Hand Grip Camera Grip for Sony NEX-7 Fits Arca-Swiss Standard Features: CNC machined from light weight aircraft grade aluminum. Satin Anodized Surface - Provides improved abrasion and corrosion resistance. Both vertical and horizontal plate with Arca-Swiss standard dovetail groove. Custom made for a perfect fit with the Sony NEX-7 camera body. Compatible with Arca Swiss, Really right stuff (except lever-release clamp), Wimberley, Jobu Design, Kirk Enterprises, Markins, Giottos, Benro, Feisol, Novoflex etc. Allowing full access for battery hatch cover and all cable interface. Change quickly from landscape to portrait mode without adjusting your setup. Note: Camera not included. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Miktek CV3 Nine Pattern Tube Condenser Microphone Fresh Condition For Sale The Miktek CV3 is a large-diaphragm tube condenser ­microphone offering nine pick-up patterns. The CV3’s sound is truly large and produces a musical response that will please artists, producers and most seasoned engineers alike. The bottom end is big, warm and tight, with mids that are present and even, along with a high frequency response that’s sweet and airy. The CV3 is ideal for recording single vocalists, and perfect for acoustic instruments, groups of vocals, piano, string ensembles, winds, overheads on a drum kit or as ­ambient room mics. The CV3 utilizes the MK9 capsule developed by Miktek. This unique capsule features dual 1-inch diaphragms manufactured using 5-micron Mylar with a 0.4-micron layer of evaporated gold, which is precisely tensioned, mounted to carefully-tuned backplates, and set back-to-back to create the final capsule. Tight tolerances and special attention to precise machining of the backplate produce a linear off-axis response that ensures the accuracy of the microphone. The CV3’s head amplifier employs exotic discrete components together with a hand selected subminiature pentode vacuum tube, in which the high-voltage circuit has been uniquely implemented, the CV3 challenges the performance of the best-in-class industry standards without hesitation. The output stage features a custom AMI transformer, which offers a classic sound and an extended low frequency response found in the earliest versions of the most famous vintage tube microphones. The Miktek CV3 is hand assembled, tested and packaged in Nashville, Tennessee, USA using components from the US, Europe and Asia. Each microphone includes its serialized ­frequency response graph created during final testing.The CV3 is packaged with its swivel mount in a wooden box, which is set inside an aluminum case with the included power supply unit, 7-pin XLR cable and shock mount. Features: Classic Large-diaphragm Tube Condenser Design MK9 Dual 1-inch Capsule with 5-micron Mylar, Evaporated Gold Diaphragms Nine Selectable Pick-up Patterns Custom Designed Made in USA Miktek Output Transformer Hand Selected Subminiature Pentode Vacuum Tube Individual serialized Frequency Response Graph External Power Supply and 7-pin XLR Cable Wood Presentation Case with swivel-mount, shock-mount and rugged aluminum Carrying Case

Product Description The Spy Bluetooth Banyan with Nano Earpiece Set is custom made Bluetooth Vest for hidden communication intended for legal use. The Bluetooth Vest comes with Bluetooth transmitted chip on the left hand side on the bottom of the Vest, which shall be connected to the cell phone via Bluetooth after power ON. The Bluetooth chip on the vest has a function to receive call/Redial/Reject all in one function. It means you need not operate your cell phone once it is configured. The Bluetooth Vest has a hidden High gain microphone which is on the center of the Bluetooth Suit on the chest portion after wearing the suit. Operation:- 1. Switch ON the Bluetooth Chip in the Vest which is on the lower end on left side of Bluetooth Suit. 2. Pair It with the cell phone 3. Place the battery in the Spy Nano Earpiece 4. Wear the Bluetooth suit for Hidden communication with the Spy Nano Earpiece in Your Ear. 5. Spy Nano Earpiece in your ear allows you to receive voice communication from your partner on the other side. 6. The built in microphone on the Bluetooth Suit which comes exactly on the center of chest portion after wearing will transmit your voice to you partner on the other side. It means TWO WAY communication. NOTE: PRODUCTS THAT COMES WITH LOWER PRICES ARE CONFIGURED WITH LOWER END OF WIRELESS EARPIECE WHICH WILL EFFECT THE CLARITY OF SOUND TO BE HEARD http//www.spytechzone.com Call-9980001188