Management engineer

Performs basic technical activities to service the customer directly or through customer interface, under supervision and following defined procedures. Main Responsibility Area Executes basic technical tasks according to defined procedures. Actively develops competences. Position Description Fault Management takes end-to-end responsibility for corrective maintenance of Network problems ensuring trouble tickets are actively managed until resolution to SLA & OLA requirements. It is completed responsible for full fault management in the network from alarm surveillance to resolution. Alarm Monitoring, Fault Localization/ Correction/ Verification* resolution from remote delivery center. Corrective Maintenance (centralized routines)* Liaises with Customer Care organizations regarding Network outages Provide support and coordination with subcontractors and 3rd parties to resolve faults. Liaises with other service providers regarding network outages. Supports end-end support, coordination and control of assigned Trouble Tickets and work-order. Providing incidents reports and RCA for the outages in the network. Supports Major service outage investigations and follow up Ensures planned outages are carried out/rolled back in maintenance window Ensures Operator Customer Care is fully updated for service affecting outages Operation and maintenance for network elements in radio, core, switch, VAS. Carry out preventive proactive measure to improve network availability and reducing MTTR. Working experience on Gb,Gr, Ga, Gi,Gn.Iu-ps, link configuration & integration. O&M for transmission equipment (optical and Wimax), SDH, PDH. Having hands on experience on Radio, RNC,core GPRS Packet Core (SGSN & GGSN). Follow NOC procedure / process and ready to work in 24x7 environments. Knowledge of 2G, 3G, GSM, CDMA.

Engineer - NPD - NPD & Tool Room department - Minimum 1 Years experience in any Automotive or Rubber Moulding Industry,Chakan Post -:Engineer - NPD Location: Chakan Department:NPD & Tool Room Educational Qualification -:Diploma / Post Graduate Experience -: Minimum 1 Years experience in any Automotive or Rubber Moulding Industry. Competencies -: (Skills, Knowledge & Abilities required to competently perform the job) Good Knowledge about the job & positive attitude, Good Team member, Analytical ability, Preferred Knowledge of 3D CAD Drawing Reports To:Head - NPD & Tool Room Job Summary: 1. Make component drawings from customer drawings 2. Make Jigs & Fixture drawings 3. Conduct mould trial run for new product. 4. Inspect (NPD) component and make reports 5. Make APQP,PPAP documents 6. Active participation in Continuous improvement projects 7. Knowledge ISO / TS procedures related to NPD 8. Ensures development of new products as per the customers’ specifications and quality parameters within specified time 9. Interacts with the quality team of the customers to understand the requirements and ensure the same is fulfilled Decisions Expected -:Kaizen, Quality Improvements Recommendations Expected -:Drafting practices, Documents management & re-trivial of documents. Please send resume with my email id - / Regards, Sonali HR

Engineer jobs - Chennai - - 0 to 5 years of experience Fresher / experience: 0 - 5 years Skills: Production, Manufacturing, Production engineer, Production executive, Production supervisor, Quality, Quality assurance, Quality analyst, Quality Control Industry: Automotive/Automobile/Ancillaries Functional Area: Manufacturing/Engineering/R&D Develop customized solutions after interfacing with customers Oversee project management along with technicians Vacancy:15 skills-Qualifications-Diploma, BE/B.Tech Experience-0 to 5 Years Regrads, YAMUNA-HR @ 73053 and 23220

Job Description: He is accountable in terms of sharpening his skills and knowledge on project organization, standards of engineering, and scientific investigation and evaluation to be more efficient at work. He must be able to devise, organize, and ensure engineering arrangements and revisions. The ability to work under pressure Problem-solving skills Based on the plant process manager s guidance may work as a trainer for the operator. Junior Engineer Trainee Job Responsibilities- A Junior Engineer works under the direct command and management of an Engineer. Functional Area: Engineering Functional Role: Mechanical Engineer Candidate Requirement

Responsible for daily men management, work allocation and getting the work done from operators & workmen. Responsible for meeting daily production targets of specified quantity and quality in cost effective manner and ensure the prod Thanks & Regards, DEEPALI (Senior HR Recruiter) MERIDIAN OUTSOURCING Office No -03 Basement D 1/56, Lalita Park,Laxmi Nagar New Delhi-92 M>-8285083448/8285081711 https://hrdmeridian.wix site.com/meridian

ECE Engineers & Diploma Holders looking to start a career in core telecom should only apply. Job involves Installation, Operation & Maintenance of Telecom Infrastructure. Various Positions: 1) Fault Management Engineer 2) NOC Engineer 3) Operation & Maintenance Engineer 4) RF Engineer 5) Graduate Trainee Engineer Contact Us: Deepak Sharma +91 7837074045/7307770102/01725080804

Management job in Canada I'm a Canadian citizen. I am urgently looking for a hard working and honest person male or female who is willing to work with me here in Canada as Electrical Site Engineer/Property Management in my household/Real estate. Interested applicant should submit his/her updated resume via my email address stated below. NOTE: Foreign applicant should not apply if he/she do not have International passport or ready to relocate.jameswoolf1515@gmail.com

Engineer would need to help to build out, maintain, and troubleshoot our expanding infrastructure. Engineer will be responsible for L1 support for systems (Laptop, desktops, printers, switches, etc.) with 2-5 years’ experience. Contract Period: 12 Months Responsibilities: 1. Installation, configuration, test and maintain windows client operating systems (windows 7/8/8.1/10). 2. Good knowledge of desktop /laptop printer/scanner/projector/ Bio-metric devices related issues (hardware /software) 3. Any Software issues in the desktop / Laptop. 4. Network connection issues. 5. Desktop / laptop audit and IT policy check 6. New activity from environ / laptop end (new dat file installation, new OS/ software installation etc.) 7. New IT asset purchase (if required) plan as per instructions from IT Manager 8. Security Patching for Microsoft and other applicable products 9. Remote support to the users through remote desktop applications (TeamViewer, any desk etc.) 10. Basic knowledge of software installation and troubleshooting on client systems. 11. Ability to solve issue independently. Hands on experience with outlook, MS office and Microsoft related issues. 12. Co-ordinating with vendors, ISPs for Internet and MPLS line and hardware /service related problems. 13. Managing Dell /Lenovo/HP hardware’s (desktop/laptops). 14. IT policy implementation and compliance check within the organisation. 15. Inventory management. 16. Maintain security, backup, and redundancy strategies Qualification: ·Diploma or Graduation or equivalent ·CCNA, MSCA,MCSE,MCITP will be preferred. ·Basic knowledge of Linux operating system will be preferred. ·Should have worked at L1 level for 2-5 years. ·Should have good knowledge of Microsoft operating system (clients). ·Good communication skill. ·Ability to solve issues independently

Qatar Service Co Interview @ Chennai On 3rd May 2017 1;BMS Engineer (Facility & Projects) 8no= Salary Range 3000 4000 Qr Required Skills: - Hands on experience in field commissioning of various IBMS systems like BMS FAS, PAS, ACS, IP CCTV, BMS, WLD, Aspiration system etc. - Good at conducting site acceptance test (SAT) for various IBMS systems like BMS, FAS, PAS, ACS, IP CCTV, WLD, Aspiration system etc. - Hands on experience in interacting with customer / consultant for approvals related to design engineering, IBMS system testing & handing over to client. - Sound knowledge of HVAC, Electrical, Plumbing & Dashboards. - Familiar with various 3rd party equipments integration on various Open protocols like MODBus, BACnet, MBus etc -B.E. / B.Tech in Mechanical / Electrical Engineering with 7 years GCC experience, capable of designing & executing BMS electrical & mechanical installations works and interfacing them with other systems and commissioning it. -Ability to do correspondences and coordinate with various departments & parties to obtain approval will form integral part of his responsibility. Salary Range 3000 4000 Qr. 2;MEP Engineer (Facility & Fire fighting system) 8 no= salary=QAR. 2500 QAR.3500 Degree in Mechanical Engineering Experience in the field of AC and allied MEP services and maintenance. Able to lead & guide a team of supervisors, Foremen and Technicians in providing technical solutions for day to day service calls Using performance management techniques to monitor and demonstrate achievement of agreed service levels and to lead on improvement. Responding appropriately to emergencies or urgent issues as they arise. Able to create proper work and operation flow for MEP maintenance work. Able to construct an annual preventive and predictable HVAC maintenance plan. Customer service oriented personality. Liaising with tenants of commercial, residential and retail properties. Good knowledge of maintenance of HVAC - MEP systems, components and facilities equipments. Prepare commercial quotation for new and modification /refurbishment work of Air conditioning, electrical or plumbing systems maintenance. Knowledge of Preparation of annual maintenance contracts for HAVC - MEP and facilities management in general. Lead the maintenance teams for operation and maintenance work; as per planned preventive maintenance & schedule. Co ordination with planning dept. at Head Office for development of new and ongoing contracts. Salary Salaries and commission rates vary considerably in sales, but as a guide, package salary start in the range of QAR. 2500 QAR.3500 with transportation and executive bachelor bed space. Working hours 8+1=9 Hours and 6 days a week. Qualifications Bachelor degree in mechanical, electrical, plumbing or electrical Arabic Manageable and Fluency in Hindi & English Computer literate and proficiency in MS Office. 3;HVAC Technician Installation / Commissioning =10no=salary= Salary Range 1300 1500 To organise, direct and execute the work within the purview of the designated area to ensure smooth operation of all Refrigeration, Air Conditioning systems and pump are in safe operational condition. Key Accountabilities: Coordinate and control the day to day operation and site jobs under instruction from the supervisor. Oversee and carry out the service and maintenance of the various types of air-conditioning and refrigeration equipment under the company contracts Execute installation works of air-conditioning and refrigeration equipment as and when required Conduct site surveys and inspections Familiar with all types of equipment and localities within the area of operations Liaise with 3rd party personnel in the execution of contracts Attend shift working if required Carry out 24/7 standby duties if /as required by the roster Perform the clerical duties as required by the job Guidance and mentoring of all direct reports Adherence to all current company procedures Deputize the Supervisor in his absence and/or when required Display a sound knowledge of pipefitting and brazing techniques as applicable to the AC and refrigeration industry. Display a sound knowledge of electrical and electronic fault diagnosis as applicable to the AC and refrigeration industry. Qualification and Experience Certificate of Secondary Education/Technical Certificate or Diploma in Refrigeration and Air-Conditioning Minimum of 3 years experience in the Refrigeration and Air-Conditioning industry as a service mechanic or technician Demonstrate good man-management and interpersonal skills Computer literate Possess good communication skills Fluent in written and spoken English 4;MEP Technician Installation & Maintenance 12no=salary=Salary 1300 - 1500 Trade Certificate in Electrical or Refrigeration (Minimum 2 Year Course) Minimum 5 years of Experience in Operations and Maintenance of Electrical/ Mechanical/Plumbing Systems in Hospital Industry. (Exp. in operation& maintenance of HVAC, Electrical systems, Pumps, Motors, welding, hospital equipments, Boilers, plumbing systems etc,) Good Communication Skills(English speaking) Salary 1300 1500 5;BMS Technician =12no= Diploma/ITI in Electronics Candidates must have the knowledge in reading, writing and speaking good English Candidates should have the knowledge and adequate experience in Operating, Troubleshooting and carrying out minor repair works on BMS systems Should have 8-10 years maintenance experience in HVAC Control System in Facilities Maintenance Projects especially in Hospitals. Applicants must have good English language proficiency with Arabic language skills being a strong advantage. We are looking for BMS Maintenance Technician to work in Facilities Management. We are looking for candidates with experience in Maintenance of BMS Systems in malls, office or residential buildings, schools, universities, airport etc. The ideal candidate should have working knowledge of - Building BMS Systems - Safety of BMS Systems - Knowledge of systems like DDC Panel, Sensing Systems, replacement of sensors etc - BMS system maintenance in FM background in buildings malls, airports, universities etc Salary = 1300 - 1500 Marketing & Sales Exeutive=12no= Sales Executive for Security Facility Management or Manpower Company Visit potential customers for new business Provide customers with quotations Gather market and customer information and provide feedback on buying trends Represent your organization at trade exhibitions, events and demonstrations Identify new markets and business opportunities Record sales and send copies to the sales office Review your own sales performance Excellent communication skills A confident and determined approach Resilience - and the ability to cope with rejection Self-motivation and drive A competitive streak maintaining and developing relationships with existing customers in person and via telephone calls and emails; cold calling to arrange meetings with potential customers to prospect for new business; responding to incoming email and phone enquiries; acting as a contact between a company and its existing and potential markets; negotiating the terms of an agreement and closing sales; gathering market and customer information; representing their company at trade exhibitions, events and demonstrations; creating detailed proposal documents, often as part of a formal bidding process which is largely dictated by the prospective customer; recording sales and order information and sending copies to the sales office, or entering figures into a computer system; reviewing your own sales performance, aiming to meet or exceed targets; gaining a clear understanding of customers' businesses and requirements; making accurate, rapid cost calculations and providing customers with quotations; feeding future buying trends back to employers; Salary Salaries and commission rates vary considerably in sales, but as a guide, package salary start in the range of QAR. 1500 QAR.2000 with transportation and executive bachelor bed space. Working hours 8+1=9 Hours and 6 days a week. Qualifications business, management or marketing; media studies (for advertising and media sales); Arabic Manageable and Fluency in Hindi & English Skills the ability and desire to sell excellent communication skills; a positive, confident and determined approach; resilience and the ability to cope with rejection; a high degree of self-motivation and ambition; the skills to work both independently and as part of a team; the capability to flourish in a competitive environment; a good level of numeracy. Salary offered 1500 2000 Cleaning supervisor (Facility / property Management) 12 Tasks and Responsibilities: Manage the daily activities of the Housekeeping department to include appropriate cleaning of all offices, concourses, seating areas, washrooms, restaurants, concession stands, suites, and all public spaces. Planning, organizing and directing team members to ensure the highest degree of guest satisfaction. Daily supervision of the housekeeping staff, including the day, event and post-event crews. Daily supervision of the grounds keeping staff, including the day, event and post-event crews. Purchase, re-order and maintain housekeeping supplies and inventory. Conduct pre-event inspections of all rooms, concourses, clubs, seating areas and public areas prior gate opening for every event held at the Arena. Recruit, schedule and train all new housekeeping staff members. Maintain the housekeeping budget, providing billing summaries and expenses for all pre and post events. Uphold the highest standards of cleanliness, safety, and conduct. Knowledge of OSHA and safety standards within Housekeeping department. Determines and maintains the department work schedule used to notify staff of upcoming events and ensure proper preparation and staffing for each event. Ensures the proper maintenance of all equipment; makes arrangements for repair and/or replacement of used and damaged equipment. Required Knowledge/Skills/Job Qualifications: Knowledge, Skill and Ability Previous experience managing a team of housekeeping employees through motivation, coaching and development. The ability to anticipate customer needs, change goals and direction quickly and multitask Working knowledge of rooms management systems. Advanced knowledge of Housekeeping process and procedures. Proven experience supervising housekeeping departments of 15+ employees. Ability to maintain a budget Proven excellence in customer service. Capable of using independent judgment/solid decision making skills ability Proven comfort and experience to interact effectively with all levels of management, guests, associates, and clientele, both inside and outside of the organization. Salary 2000 2500 Multi Technician 10 Trade Certificate in Electrical or Refrigeration (Minimum 2 Year Course) Minimum 5 years of Experience in Operations and Maintenance of Electrical/ Mechanical/Plumbing Systems in Hospital Industry. (Exp. in operation& maintenance of HVAC, Electrical systems, Pumps, Motors, welding, hospital equipments, Boilers, plumbing systems etc,) Good Communication Skills(English speaking) Salary 1300 - 1500 Ballet shuttle technician(warehouse) 4no Complete operating knowledge of ware house racking automation system -shuttling system with English speaking capacity. GCC experience will be preferable. Salary 1500 to 1700 House Hold equipment technician10no= Simple repairs to all portable electric and pneumatic tool, & in & outdoor products.Troubleshooting tool failure--fully or partially disassembling unit to examine components for wear/defects and replacing parts that are worn or defective like washing machine, dish washer, and other house hold equipments including kitchen equipments. Converting tools to special voltage, change speeds, etc. Should have complete knowledge on repair and installation of the household equipments and troubleshoot. Salary range 1300 to 1500 send resume=placement784@gmail.com

Immediate Opening for Site Engineer for Construction Work Company: EDM SOFTWARE SOLUTION Location: Coimbatore, Tamil Nadu, India Description: Experience: 0 to 8 Years Job Type: Full time Job Location: Abroad Interview Location: Coimbatore Qualification: - Diploma in Civil - B.E in Civil - M.E in Civil Key skills: Basic skills EDM SOFTWARE SOLUTIONS PVT LTD Co., Coimbatore 9791684242 Job Description:- - Roles: * We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society. - Responsibilities: * Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner Conduct on site investigations and analyze data (maps, reports, tests, drawings and other) * Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications * Assess potential risks, materials and costs * Provide advice and resolve creatively any emerging problems/deficiencies * Oversee and mentor staff and liaise with a variety of stakeholders * Excellent knowledge of design and visualizations software such as Auto CAD, Civil 3D or similar * Project management and supervision skills * Strong communication and interpersonal skills Qualification: Any Degree in Civil Department Designation's: - Site Engineer - Site Supervisor - Project Engineer Salary: 2000 AED No Of Post Vacant: - Site Engineer: 8 - Site Supervisor: 10 - Project Engineer:5 Skills Needed: - Technical Skills. - Project Management. - Communication Skills. - Creativity. - Problem Solving. - Leadership skills. - Organizational skills. - Attention to Detail - Time Management - Passion for Learning Processing Time: 60-70 days Benefits: - Accommodation free Candidate must be a Gulf experience or Indian experience Further details Contact: 9791684242 THANKS AND REGARDS EDM SOFTTECH SOLUTIONS PVT LTD CO., COIMBATORE HR-9791684242

Colleges and Admission in engineering through management quota 2013 Want your dreams of becoming an engineer come true?? Then Contact us @ 9742479101 Engineering is one of the most interesting crafting professions. Trump Career solution with More than 10 years of dedicated work in the field of Career Counseling and admissions in the best engineering colleges of India has helped more than thousands of students achieve their goal. We provide admissions in top engineering colleges through management quota. Colleges and Admission in engineering through management quota 2013 Our motive is not only to counsel a student to select a proper career for himself, but also to provide them self-confidence. We believe in providing lifetime services. Once a member would always be a member .We help the student to achieve his aim in life once he becomes a part of our family. Our members have more than a decade of experience in this field. We have many dedicated members who believe in the best. We are working since a long time in the field of consulting with a vision: to provide the best admissions counseling possible to aspiring college and graduate students. Colleges and Admission in engineering through management quota 2013 We are India's growing consultancy company, where we lay the right foundations of successful career and facilitate the industry to hire best-in-class talent. Colleges and Admission in engineering through management quota 2013 We are shaping the professional world with our innovative approach and enriched experience. Colleges and Admission in engineering through management quota 2013 Entrance exams for engineering 1) AIEEE: (All India Engineering Entrance Examination)- Colleges and Admission in engineering through management quota 2013 2) IIT JEE (IIT Joint Entrance Exam)- Colleges and Admission in engineering through management quota 2013 3) BITSAT(BITS Admission Test)- Colleges and Admission in engineering through management quota 2013 4) NATA (National Aptitude Test in Architecture)- Colleges and Admission in engineering through management quota 2013 5) VITEEE(Vellore Institute of Technology Engineering Entrance Exam)- Colleges and Admission in engineering through management quota 2013 6) IIIT-PGEE(International Institue of Information Technology-Post Graduate Entrance Examinations)- Colleges and Admission in engineering through management quota 2013 7) SRMEEE (SRM Engineering Entrance Exam)- Colleges and Admission in engineering through management quota 2013 8) MP-PET(madhya pradesh Pre Engineering Test)- Colleges and Admission in engineering through management quota 2013 9) JMIEE (Jamia Milia Islamia entrance examination)- Colleges and Admission in engineering through management quota 2013 10) GATE (Graduate Aptitude Test in Engineering)- Colleges and Admission in engineering through management quota 2013 Mission "To provide the best admissions counseling possible to aspiring college and graduate students” We believe in spreading awareness amongst all people about the career options and opportunities in India. Colleges and Admission in engineering through management quota 2013 "To become and maintain our position as the best and trustworthy company in the field of career counseling, career guidance and admissions. Colleges and Admission in engineering through management quota 2013 Want your dreams of becoming an engineer come true?? Then Contact us @ 9742479101 hurry up

Immediate Recruiting for MEP Design Engineer in Croatia Company: EDM SOFTWARE SOLUTION Location: Coimbatore, Tamil Nadu, India Description: Immediate Recruiting for MEP Design Engineer in Croatia Job Description: 1. Responsible for planning and design in the area of Mechanical, Electrical and plumbing (MEP) system 2. Working as part of the project management team, reporting to the Project Manager responsible for all aspects of the project relating to Fit Out. 3. Management of the MEP team to ensure that the day to day duties are performed professionally and expeditiously to support the ongoing progress of the project. 4.Manage to oversee the work of subordinate staff contact architects or Engineer. 5.Prepare plans details, specified and cost estimated of plumbing, heating, ventilating, air conditioning and general piping system. 6.Identify problems in design, plan, manage and deliver multiple projects. Job Type: Full Time Job Location: Abroad Interview Location: Coimbatore Qualification: - Diploma in any specialization - Any Basic Graduation [UG / PG] - ITI Key skills: Basic skill EDM SOFTTECH SOLUTIONS PVT LTD COMPANY COIMBATORE 9791684242 Dear Candidate., Our company is recruiting talented, hardworking, experienced & enthusiastic candidate wanted for design engineer profile in abroad Designation: Designer Engineer Attractive Salary: 60k -80k per month Duty Hours: Normal Hours Skills for Graphic Designer: * Excellent IT skills, especially with design and photo-editing software. * Exceptional creativity and innovation. * Excellent time management and organizational skills. * Accuracy and attention to detail. * An understanding of the latest trends and their role within a commercial environment. Benefit: Food & Accommodation For more updates contact 9791684242 THANKS AND REGARDS EDM SOFTTECH SOLUTIONS PVT LTD COMPANY COIMBATORE Contact: 9791684242 Email Id: edmsofttech@gmail.com

Job Summary Civil engineer B.E. (Civil) engineers to work in design and Site management. Candidates who have completed software training / designing courses are preferred. Qualification: Dip,BE / B.Tech Civil Engineer Functional Area: Site Engineering, Project Management / Site Supervising / Design Engineer / Rebar detailing/ Quantity Surveyor Experience: 0 to 5 Yrs Location: Chennai Company: Reputed / Top MNC Before attending Interview Call us for appointments Without appointment candidate cannot attend the next Level interview Responsibilities and Duties Site Execution Co-Ordination with Labour’s and Sub-Contractors Preparing Weekly Labour Bill Preparing Reconcilliation Statement Auto Cad Drawings Co-Ordination with Client Required Experience, Skills and Qualifications Skills: Construction, site, Civil, Project, Site engineer, Supervisor, structural Engineer, Structural Design Engineer, Civil Engineer, Bridge Engineer, Design Engineer, Structural Design, Regards Email:chennaiprivate2@gmail.com Phone: 9600121226

Junior civil engineer immediate wanted B.E. (Civil) engineers to work in design and Site management. Candidates who have completed software training / designing courses are preferred. Qualification: Dip,BE / B.Tech Civil Engineer Functional Area: Site Engineering, Project Management / Site Supervising / Design Engineer / Rebar detailing/ Quantity Surveyor Experience: 0 to 5 Yrs Location: Chennai Company: Reputed / Top MNC Before attending Interview Call us for appointments Without appointment candidate cannot attend the next Level interview. Skills: Construction, site, Civil, Project, Site engineer, Supervisor, structural Engineer, Structural Design Engineer, Civil Engineer, Bridge Engineer, Design Engineer, Structural Design, Regards Email:chennaiprivate2@gmail.com Phone: 9600121226

Designing engineer B.E. (Civil) engineers to work in design and Site management. Candidates who have completed software training / designing courses are preferred. Qualification: Dip,BE / B.Tech Civil Engineer Functional Area: Site Engineering, Project Management / Site Supervising / Design Engineer / Rebar detailing/ Quantity Surveyor Experience: 0 to 5 Yrs Location: Chennai Company: Reputed / Top MNC Before attending Interview Call us for appointments Without appointment candidate cannot attend the next Level interview Responsibilities and Duties Site Execution Co-Ordination with Labour’s and Sub-Contractors Preparing Weekly Labour Bill Preparing Reconcilliation Statement Auto Cad Drawings Co-Ordination with Client Required Experience, Skills and Qualifications Skills: Construction, site, Civil, Project, Site engineer, Supervisor, structural Engineer, Structural Design Engineer, Civil Engineer, Bridge Engineer, Design Engineer, Structural Design, Regards Email:chennaiprivate2@gmail.com Phone: 9600121226

Job Summary B.E. (Civil) engineers to work in design and Site management. Candidates who have completed software training / designing courses are preferred. Qualification: Dip,BE / B.Tech Civil Engineer Functional Area: Site Engineering, Project Management / Site Supervising / Design Engineer / Rebar detailing/ Quantity Surveyor Experience: 0 to 5 Yrs Location: Chennai Company: Reputed / Top MNC Before attending Interview Call us for appointments Without appointment candidate cannot attend the next Level interview Responsibilities and Duties Site Execution Co-Ordination with Labour’s and Sub-Contractors Preparing Weekly Labour Bill Preparing Reconcilliation Statement Auto Cad Drawings Co-Ordination with Client Required Experience, Skills and Qualifications Skills: Construction, site, Civil, Project, Site engineer, Supervisor, structural Engineer, Structural Design Engineer, Civil Engineer, Bridge Engineer, Design Engineer, Structural Design, Regards Email:chennaiprivate2@gmail.com Phone: 9600121226

Job Summary B.E. (Civil) engineers to work in design and Site management. Candidates who have completed software training / designing courses are preferred. Qualification: Dip,BE / B.Tech Civil Engineer Functional Area: Site Engineering, Project Management / Site Supervising / Design Engineer / Rebar detailing/ Quantity Surveyor Experience: 0 to 5 Yrs Location: Chennai Company: Reputed / Top MNC Before attending Interview Call us for appointments Without appointment candidate cannot attend the next Level interview Responsibilities and Duties Site Execution Co-Ordination with Labour’s and Sub-Contractors Preparing Weekly Labour Bill Preparing Reconcilliation Statement Auto Cad Drawings Co-Ordination with Client Required Experience, Skills and Qualifications Skills: Construction, site, Civil, Project, Site engineer, Supervisor, structural Engineer, Structural Design Engineer, Civil Engineer, Bridge Engineer, Design Engineer, Structural Design, Regards Yalini 9600121226

Huge Opening for Foundry Engineer Experience: 0 to 5 years Job Type: Full time Job location: Coimbatore / Erode Qualification: Any Basic Graduation Key skills: basic Posted by: consultant Description Opening for Foundry Engineer Company: EDM SOFTWARE SOLUTION Location: Coimbatore, Tamil Nadu, India Description: Experience: 0 to 5 years above Qualification: Any Basic Graduation Key skills: basic EDM SOFTWARE SOLUTIONS PVT LTD Co., Coimbatore 9791684242 Job Description: *.A foundry is a factory or other facility that creates metal castings of products. A foundry engineer designs or upgrades these facilities. * Foundry engineers may also redesign or make improvements to older factories to make them more productive. Qualification: Any Degree [B.E., Diploma] Attractive Salary will be offered by company based on your profile Designation: * Foundry Engineer * Supervisor * Labor Processing Time: 45 - 50 days Work Place: Gulf No of Vacant: 50 Skills are Required: * Communication * MS Office * Technical * Creativity * Project Management Benefits: Accommodation provided by company Opportunity to Work in Abroad. Further details Contact: 9791684242 THANKS AND REGARDS EDM SOFTTECH SOLUTION PVT LTD CO., COIMBATORE HR-9791684242 Email: edmsofttech@gmail.com Mobile number: 9791684242 Experience: 0 to 5 years Job Type: Full time Job location: Coimbatore / Erode Qualification: Any Basic Graduation Key skills: basic Posted by: consultant Description Opening for Foundry Engineer Company: EDM SOFTWARE SOLUTION Location: Coimbatore, Tamil Nadu, India Description: Experience: 0 to 5 years above Qualification: Any Basic Graduation Key skills: basic EDM SOFTWARE SOLUTIONS PVT LTD Co., Coimbatore 9791684242 Job Description: *.A foundry is a factory or other facility that creates metal castings of products. A foundry engineer designs or upgrades these facilities. * Foundry engineers may also redesign or make improvements to older factories to make them more productive. Qualification: Any Degree [B.E., Diploma] Attractive Salary will be offered by company based on your profile Designation: * Foundry Engineer * Supervisor * Labor Processing Time: 45 - 50 days Work Place: Gulf No of Vacant: 50 Skills are Required: * Communication * MS Office * Technical * Creativity * Project Management Benefits: Accommodation provided by company Opportunity to Work in Abroad. Further details Contact: 9791684242 THANKS AND REGARDS EDM SOFTTECH SOLUTION PVT LTD CO., COIMBATORE HR-9791684242 Email: edmsofttech@gmail.com Mobile number: 9791684242

Job Description Hi, Greetings for the day! Designation CONSTRUCTION ENGINEER ROADS STRUCTURES / HIGHWAYS STRUCTURES Location: Mumbai, Nagpur, Kolkata, Chennai, Noida, Hyderabad. Job Description His tasks include: - Ensure that the structures work, entrusted to him are executed in accordance with the plan, drawings specifications and time schedule. Report to the superior / construction managers regarding progress of the work & constraints in work under his execution. Manage relations with supervisors & workmen and control execution of relevant activities under his supervision. Also provide technical guidance to his subordinates Report to higher site management regarding constraints and possible solutions in respect of work under his supervision. Get the works, under his supervision, inspected and approved by the client / Consultant / Independent Engineer. Ensure implementation of quality, safety, hygiene and environmental measures. Desired Profile He should have Engineering Degree (preferably first class) in Civil Engineering from a recognized university / engineering college. He should be conversant with latest construction & formwork technologies used in highway structures / roads structures. Especially for Bridges / Overpass / Underpass/ Culverts etc. Knowledge of computer applications (MS Project & Primavera) and codes of practices specification for Highway construction will be an added advantage. Should be ready to relocate in India & Abroad. He should have knowledge of contract billing and basic statutory requirements. He should have good communication skills and aptitude to develop leadership qualities. Knowledge of computer applications/ exposure to design work desirable Industry type: Construction / Engineering / Cement / Metals Functional Area: Site Engineering, Project Management Education: B.E. Civil / B. Tech Civil Keywords Highway, Road, Bridges, Structures, Infrastructure, Construction Project Management, Construction Management, Formwork, Culverts, underpass, overpass, pedestrian bridge. Note: Only pass outs can apply. CONTACT: MR. B. ANIRUDH () Thanks & Regards, Reliance Infrastructures Limited.

Duties and Responsibilities for the role EMS Engineer EMS Engineer Good experience in deploying, configuring and administering Core Network Services (AD, DNS, DHCP and File Services) Good experience in deploying, configuring and administering Virtualization and System Management (Hyper-V, SCCM, VMM, SCOM) Good experience in deploying, configuring and administering Azure Cloud Services - Identity & Access Management (Azure AD connect and Azure AD Primmum features like MFA, SSO and conditional access policies) Good experience in deploying, configuring and administering Microsoft Enterprise Mobility + Security Solution (with real life experience) Good experience in deploying, configuring and administering Microsoft O365 Solution (with real life experience) Good experience in Operations Management Suite (OMS) Knowledgeable of Firewall system Good Communication skills and good command of English language Items in Yellow in mandatory

Job Description.... ELECTRICAL ENGINEER IN MNC FOR CHENNAI.... FRESHER AND EXPERIENCE CAN APPLY... ARREARS CAN ALSO APPLY.... Prime Responsibilities Assist E&I manager in Proposal & estimation, project management, Construction management task force pertaining to E&I Prepare costing strategy, prepare proposal deliverables, review of proposal engineering deliverables, Review of bulk material quantities & propose optimisation strategies, check package scope definitions, obtain offers, prepare cost sheets, obtain construction offers, Techno - commercial analysis of offers Prepare procurement strategy, monitoring & expediting engineering, check engineering deliverables, procurement coordination & technical close out with suppliers, vendor expediting for on time delivery. Prepare manufacturing progress report and participate in inspection, arrange final documentation. Close out with suppliers. Construction monitoring & expediting / recovery plans, checking construction invoices, participate in site testing, no load trials & commissioning of unit Participate during various interactions with Customer, Assist E&I manager for E, P, C schedule preparation Shared cross - functionally Specific short term assignments with respect to other projects proposals SalaRY; 20K Industry:Construction, Engineering, Cement, Metals Functional Area:Site Engineering, Project Management Role Category:Project Management Role:Project Manager-Production/Manufacturing/Maintenance Employment Type: Full Time, Permanent ONROLL Preferred Keyskills Costing Project management Construction management Other Keyskills Procurement Construction C Proposal engineering Techno-commercial Monitoring Electricals Education- UG: BE / BTECH EEE/ ECE/ E&I / DIPLOMA/ ITI WITH KIND REGARDS; AKILA-HR 988-48-44-385 NINE EIGHT EIGHT FOUR EIGHT FOUR FOUR THREE EIGHT FIVE

Job Title: Trainee Asst. Department: The spectrum of consultancy services include inter-alia, Project Management Consultancy (PMC) works, IT implementation in Power Sector, Smart Metering, Smart Grid, Solar Projects, Third Party Quality Inspection, Monitoring of Rural Electrification works, Feeder Renovation Program, Energy Audit, HVDS study, Load flow study of power system networks, preparation of Detailed Project Report (DPRs), Power Transmission network and other power projects including various Govt. of India Schemes viz., DDUGJY, R-APDRP, IPDS, PMDP etc. to the Central/State power utilities across the Country, Consultancy Assignments to Government, Central/State Electricity Regulatory Commission. Educational Qualifications: BE/B.Tech Engineering or equivalent in concerned discipline with not less than 50% marks in aggregate for all candidates. Work Experience: Fresher Total Vacancy: Location: India Remuneration(per month): An initial consolidated amount of Rs. 80,000 per month, all inclusive. The consolidated remuneration will be increased @ 5% for each succeeding year subject to satisfactory performance. Civil Engineer Duties and Responsibilities Civil Engineer job description should contain a variety of functions and roles including: Manage, design, develop, create and maintain projects Conduct on site investigations and analyze data (maps, reports, tests, drawings and other) Carry out technical and feasibility studies Draw up blueprints according to technical specifications Assess potential risks, materials and material and labor costs Provide advice and suggestions to resolve problems Oversee and mentor staff Liaise with a variety of stakeholders Monitor progress of projects Produce reports in project status Manage budget and purchase equipment/materials Comply with guidelines and regulations including permits Civil Engineer Requirements / Skills / Qualifications Civil Engineer job description should include these common skills and qualifications: Registration/License as a Professional Engineer may be required. Familiarity with design software, such as Autodesk, AutoCad Civil 3D, and MicroStation. Knowledge of map creation software and photo imaging software. Strong analytical and critical thinking skills, with a high level of accuracy in calculations and design. Excellent time management skills to ensure project deadlines are met. Leadership skills to effectively manage a diverse group of professionals working on one project. Ability to coordinate more than one project at a time.

Recruiting for Estimation & Invoicing Engineer in Serbia Company: EDM SOFTWARE SOLUTION Location: Coimbatore, Tamil Nadu, India Description: EDM SOFTWARE SOLUTIONS PVT LTD COIMBATORE 9791684242 Job Type: Full Time Job Location: Abroad Interview Location: Coimbatore Job Description:- * Accountable for the execution of the set estimating & invoicing strategy as aligned to the Business Plan and Revenue forecast. * Performs the estimating & invoicing processes in a timely and effective manner in keeping with the Company's business objectives. 1. Review Request for Quotation (RFQ) files sent to the Company from clients, to analyze the content such as drawings and supporting data to interpret, understand and confirm the scope of the work being requested. 2. Review the terms & conditions & read through the specifications, using technical knowledge, ability and skills to determine fullness or appropriateness of Request for Quotation (RFQ). 3. Based on professional evaluation of the Request For Quotation (RFQ), Populate the Tender Review Check List and seek Manager bid or no bid options. Leverage technical expertise to convince/influence management to proceed to sign-off on your projects tender order review checklist. 4. Review ship specification and Original Owner Specifications for thorough job understanding. Qualification: - A Degree or Diploma in Naval Architecture, - Marine Engineering, - Mechanical Engineering Dear Candidate., Our company is recruiting talented, hard working, experienced & enthusiastic candidate for Estimate engineer in Abroad Service details: Processing Time (45- 60)days Attractive Salary: 60k - 80k per month Work Place: Serbia Technical Competency: 1. Commercial Management 2. Regulatory Knowledge 3. Technical Negotiation (Costing and Estimation) 4. Billing Process Management 5. Analytics and Reporting 6. Record Keeping and Document Control further details Contact: EDM SOFTWARE SOLUTION THANKS AND REGARDS EDM SOFTWARE SOLUTION PVT LTD CO, COIMBATORE HR NO - 9791684242 Email Id: edmsofttech@gmail.com

Procurement Engineer-  (min 3-5 years of Gulf experience will be preferred). Salary - to QAR according the experience of the candidates.I have attached job description of Procurement  Engineer. Job Description Responsibilities: • Develop and float RFQ documents from the Project Specifications/Input from Engineering. • Co-ordinate Technical Bid Evaluation, Do commercial Bid Evaluation and process activities to Purchase Order / Sub- Contract award • Work within the established procedures to achieve a professional, ethical, reliable and cost effective total Procurement service through Market Research, Budget, and Estimating evaluations. • Assist the Procurement & Contracts Management Manager in the implementation of the procurement guidelines, policies & procedures. • Develop and implement sourcing strategies. • Investigate potential suppliers. • Propose enquiries to specified and non-specified vendors and obtain quotations on time. • Receive and evaluate bids (by Purchasing Committee, if applicable) as per standard evaluation criteria and negotiate payment terms and discounts with suppliers. • Evaluate vendors’ proposals technically in compliance with project specifications. • Prepare and issue Purchase Orders (POs), Request for Quotations (RFQs), Request for Proposals (RFPs) and other related documents. • Revise the costing for the post tender clarifications received and provide price and technical inputs to generate official Purchase Order. • Suggest suitable technical alternatives whenever possible in coordination with the Design & Studies section and the Project Management section. • Evaluate the supplier quotations against the tender requirements such as capacity, quantity, specifications, deviations, etc. Make comparative analysis of all the quantity & use the optimum solution. • Interview supplier representatives regarding specifications, costs, inspection, and similar problems relating to materials, parts and equipment. • Maintain an updated supplier database that consists of reliable and trustworthy sources. • Ensure materials purchased are in line with the project specifications and industry practice. • Review the terms and conditions of subcontract documentation to ensure contractual protection. Skills Required Skills/Experience: • The candidate should have a minimum of 5 to 7years of related experience, preferable in contracting company in Construction Industry. • Must be fluent in written and spoken English with an excellent understanding of Business Law and Contract Management. • Should possess proven Negotiation Skills and Commercial expertise on a world wide basis. • Should have exposure to and experience in application of ISO Quality Management concept is a must. • Extensive experience in dealing with Suppliers, Contractors, and Consultants particularly those involved in the Construction Industry • Thorough understanding of Post award activities like Vendor document follow up, vendor claims, change orders, Expediting, Third Party Inspection, shipping co-ordination, material receipt and payment until close out of the Order. Competencies: • Excellent communication skills with ability to liaise at all levels • Proactive, Goal-oriented, and accountable • Capable of multi-tasking • Team player and self motivated  • Strong analytical thinking  • Detail oriented  Qualification: • Bachelor’s degree in Engineering discipline (Civil/Structural/Mechanical/Electrical etc)

SITE ENGINEER(ANVITHA) Name of job & place: Site engineer,HYD Roles & responsibilities: The role of a site engineer contributes technical responsibilities with project management. Responsible for planning, marking out and leveling construction site before any building work takes place. Responsible for the procurement and management of construction materials which are used on-site Ensures that all site works are done according to all applicable quality standards. Nature of work: Full time Requirement Qualification: Btech/BE(civil) Skills: Creativity,innovation and forward thinking Complex data interpretation Year of Pass out:

Job Profile Ensuring Quality & Environment management system implementation and adherence of system across the organization. Implementation of EMS & QMS. Key Responsibilities Quality Management System implementation across the organization. Control of documents and records. Conduction of MRM Data. Conducting internal audits and ensuring closing of non-conformities. Organizing the external audits by coordinating with external agencies. Implementation of VDA6.3, ISO/TS 16949,ISO1400, OHSAS18001, ASES, MSES Implementation of customer specific requirements (VW, Fiat, MSIL, GM etc.) Providing training to staff & suppliers. Authority: JOB REQUIREMENTS: A. Education and Training The system coordinator should have a four year technical degree or three year technical diploma. The engineer should have worked on Quality System Implementation and should have conducted internal audits. He should have trained on problem solving 7 QC tools, Training on ISO14001, ISO/TS16949, Internal auditing. B. Technical Requirements Minimum three years of experience with four years of technical degree or 6~9 years of experience with technical diploma, in quality deptt. He should be aware of requirements of ISO/TS-16949:2009. C. Managerial Experience The person should be able to present the data to management and conduct MRM. He should be able to implement the quality system in the organization in different sections. He should be able to train the people on TS 16949 and its requirements. KEY COMPETENCIES REQUIRED: Knowledge of Quality Standards Communication Skills Data analysis and interpretation Internal Audits & Process audits as per VDA6.3 Lead Auditor / Qualified Auditor for ISO 9001, ISO 14001, OHSAS18001 Knowledge of Core Tools (APQP, MSA, PPAP, FMEA, SPC) Presentation Skills Knowledge of EHS & QMS, ASES, MSES, Q capability Customer specific requirements (VW, Ford, Fiat, GM, MSIL, M&M etc.) Awareness of ERP & SAP Problem Solving techniques (6 Sigma black belt / Green Belt) Understanding of Lean Manufacturing Concept

BMS OPERATOR AND ENGINEER IN MNC FOR CHENNAI Maintain and repair the control systems of the BMS controlled HVAC systems throughout the site as determined by the manufacturers recommended system as detailed by the site management Carry out routine checks for correct operation of all control equipment as directed by site management and Daily/Weekly Servicing Plan. Renovate and replace equipment as required by fault finding to maintain equipment in optimal performance condition. Upgrades HVAC control systems and equipment and modifying or renovating as necessary. Checks routinely for correct operation of all equipment in locations that include BMS control of systems. Monitor the operation of the HVAC control systems using the BMS to monitor performance. Adjust variables and provide adjustment as required to ensure systems are operating correctly within parameters Monitor and record values of HVAC systems to build up a database of records to provide data for energy efficiency improvement. Actively participate in the training and development plan as agreed at the appraisal to include HVAC control systems trade and language training as required Personally accountable for ensuring all work is carried out in a safe and environmentally responsible manner. Experience in Building Management Systems Skills: Building Management Systems Experience: 0-5 YEARS SALARY; 15K -30K JOB TYPE; PERMANENT / ONROLL / FULLTIME WITH REGARDS; MISS; SOFIA -HR 89/ 25/ 177/ 998

WANTED FOR QUALITY ENGINEER JOB IN FRESHER JOB SKILLS: Professional certification, such as Six Sigma, Quality Engineer, or Quality Auditor Superb computer competence, including database management Knowledge of quality assurance terminology, methods, and tools Analytical, problem-solving, and decision-making skills Demonstrated knowledge of testing best practices, version control practices and defect management practice Qualification: B.E/ B.Tech/ Diploma Location: Chennai Timing: Full Time Salary: 12k to 18k For Freshers Exp: Freshers BASED ON cOMPANY Benefits: OT + Incentives + Increments based on ur Performance. ARREARS & FRESHERS/ EXPERIENCE CAN ALSO APPLY. ROLE: QUALITY ENGINEER For Further Information Contact Us: HR.DEVI PH - 91760 AND 74708

Hello we " Recruitment Advisory Line " have job opportunity for Project Engineer in reputed Infra Company.... We are in search for Young, Dynamic, Smart applicants with minimum 3 years of experience from related field... Applicants must be Civil Diploma Holder from reputed College or University or from Govt. College..... Skills Required:- * Developing Budgets, * Coaching, * Supervision, * Staffing, * Project Management, * Management Proficiency, * Process Improvement, * Tracking Budget Expenses, * Self-Development, Planning, * Performance Management, * Inventory Control, * Verbal Communication... Salary Best in Industry... For more details contact us at- ck-st floor, meenu katara, bari piair, kabir chaura, Varanasi Contact Person:- Ms. Aditi Singh (, -) Forward your CV onto:- placement dot vns at the rate recruitmentadvisoryline dot com !!!! Limited Openings Available !!!!! !~!~ Apply Soon ~!~! **** Hurry Up ****

Simplify360 Company Name, Profile, and Work Culture: Simplify360 is the world s first integrated enterprise solutions provider; our latest offerings are Social Marketing Suite for agencies, Social Contact Center for BPOs and Social Command Centre for Enterprises. We enable businesses to perform Online Reputation Management, Customer Service, Community Management, Social Media Research & Brand Auditing; Online Sales Lead Generation, and Consumer Sentiment Analysis. We have already provided solutions through our tool for industry leaders like Tech Mahindra, Wipro, Coffee Day, Star TV, Mahindra Retail and ITC Foods. Simplify360 is also the only company to work with the top media agency groups in the world like WPP and Publicis. Simplify360 operates directly or through partners in the US, Malaysia, Korea, South Africa, Saudi Arabia and the Netherlands to name a few. The company s products and services are sold in over 100 countries. Website: http://simplify360.com/ Point of Contact for CV s / Email ID: Savitha - - Number of Vacancies: 2 Keywords: Product Engineer, Java, J2EE, Struts, Hibernate, HTML, CSS, JavaScript, Java Developer, Hadoop, HBase. Job Title / Designation: Product Engineer Job Description: Build amazing user-facing features Tackle tough engineering and product problems Create new ideas with our design teams to continually iterate on the experience Work cross-functionally to evaluate the relative importance of and need for product initiatives Take full ownership of projects from design to implementation and deployment Key Functions & Roles of the Candidate: Great engineering skills and strong CS fundamentals Ability to work both independently and in cooperation with others. A sense of urgency and ownership over the product. Comfortable with full-stack projects and able to build a minimum working product quickly. Fluency with both front-end (e.g., html/css/javascript,.) and back-end technologies like Core Java, J2EE,Struts, Hibernate. Knowledge of Solr, Kafka would be an added advantage. Knowledge of Big Data Solution like Hadoop, HBase would be an added advantage. Thrives in open or ambiguous environments Great attitude towards work and people Intellectually curious and inventive. Minimum/Maximum/ Work Experience Required: 4 - 6 years. Annual CTC: 8 to 10 Lakh. Location(s) of Job: Bangalore Minimum Education Requirements: Graduates No of rounds of Interviews: 2 Work Timings: India Standard Travel & Allowance: No Languages: English Relocation & Reimbursement: As per company policy