Amplifier kit watt

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Amplifier Kit with Main heat sink and Power Supply Kit): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply Transformer required: Volt 5 Amps- NOT INCLUDED) With Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 2 x 150 Watts @ 8 Ohms and 2 x 250 Watts @ 4 Ohms. Required Power Supply transformer Volts, 10 Amps (Not Included). Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- El. cr ) Fastron connectors Silpad insulators Silver Mica compensation capacitors (Manufacturer:Kemet/ACE) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors. Electrolytic Capacitors (Manufacturer: Keltron) Note:- Amplifier Output Power 2 x 150 Watt @ 8 Ohms and 2 x 250 Watt @ 4 Ohms (Power supply: Volt 10 Amps)  Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 7 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Branded components): All resistors (1% metal film)  Power resistors (CRC) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) Main Heat Sink required (100 mm x 260 mm x 32 mm - 1 No.) - NOT INCLUDED. Note:- Amplifier Output Power 350 Watt @ 8 Ohms and 550 Watt @ 4 Ohms (Power supply: Volt 7 Amps) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors,) Rs./- Shipping charge extra. Contact details:- E-Mail: Mob. No.:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 8 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit): All resistors (1% metal film) Power resistors Faston connectors Silpad 400 insulators Silver Mica compensation capacitors MJE drivers MJL output transistors (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors Main Heat Sink (100 mm x 182 mm x 19 mm - 1 No.) and Heat Sink for LME No. Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 5 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  2SCSA output devices. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit without Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors (Manufacturer: Toshiba ) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 250 Watt @ 8 Ohms and 400 Watt @ 4 Ohms (Power supply required: Volt 6 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Contact No.: Mob. No. 

2.1 AUDIO AMPLIFIER KIT IT CONTAINS STK STK & TDA IC USED FOR SUBWOOFER MONO CHANNEL & USED FOR SUUROUND CHANNEL It works on v – 3amp or 5amp supply total power output is 180 watts rms It’s more than watt pmpo kit is ready to use for 2.1 purpose It has bass treble kit with tone controls input & output connector   In case if you have any query, please feel free to contact us. 

TDA MONO amplifier kit it is mono channel amplifier it works on amp supply it's pure 60watts amplifier u can use it as subwoofer power amp

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 8 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Reputed Brands component): All resistors (1% metal film)  Power resistors (Stead) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) MAIN HEAT SINK INCLUDED. Contact details:- E-Mail: Mob. No.

This a True 300w RMS Audio Amplifier, Needs a Transformer, 5 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 300w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 56v with center tap. Now 56v 6Amp is 336w RMS. So you can be sure that the device that you buy will give you more than 300w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 300w but Practically you can run it at close to 330w RMS with a power supply of   at 6 Amps. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 200w RMS Audio Amplifier, Needs a Transformer, 5 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 200w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 40v with center tap. Now 40v 5Amp is 200w RMS. So you can be sure that the device that you buy will give you more than 200w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 200w but Practically you can run it at close to 240w RMS with a power supply of   at 6 Amps. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 70w RMS Audio Amplifier, Needs a Transformer, 3 Amp. You can run it using a 12v battery too, Just short the two 12v and use them as one. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 70w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 24v with center tap. Now 24v 3Amp is 72w RMS. So you can be sure that the device that you buy will give you more than 70w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 70w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. The dimension of the kit is 12x6x4 Cms. For sale is only the Amplifier. No transformer is included

This a True 120w RMS Audio Amplifier, Needs a Transformer, 3 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 120w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 40v with center tap. Now 40v 3Amp is 120w RMS. So you can be sure that the device that you buy will give you more than 100w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 120w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 240w RMS Audio Amplifier, Needs a Transformer, 5 Amp. Very High Bass, Get good 60w woofer or you will end up burning cheap woofers. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 240w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 48v with center tap. Now 48v 5Amp is 240w RMS. So you can be sure that the device that you buy will give you more than 240w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 240w. The board support's 90w per channel plus a 60w woofer on a separate connection. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 70w RMS Audio Amplifier, Needs a Transformer, 3 Amp. You can run it using a 12v battery too, Just short the two 12v and use them as one. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 70w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. The primary IC for this board is Philips TDA. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 24v with center tap. Now 24v 3Amp is 72w RMS. So you can be sure that the device that you buy will give you more than 70w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 70w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. The dimension of the kit is 12x6x4 Cms. For sale is only the Amplifier. No transformer is included

This a True 60w RMS Audio Amplifier, Needs a 12-0 Transformer, 5 Amp on AC. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 60w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. 12-0 means 12v. Now 12v 6Amp is 60w RMS. So you can be sure that the device that you buy will give you more than 55w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 60w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 60w RMS Audio Amplifier, Needs a 12-0 Transformer, 5 Amp on AC. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. COMES WITH BASS, TREBLE, VOLUME AND BALANCE FUNCTIONS. Product Description High Power 60w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. This Board Comes with Base, Treble and Volume Control's. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. 12-0 means 12v. Now 12v 6Amp is 60w RMS. So you can be sure that the device that you buy will give you more than 55w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 60w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 60w RMS Audio Amplifier, Needs a 12-0 Transformer, 5 Amp on AC. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 60w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. The primary driver for this board is the popular IC. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. 12-0 means 12v. Now 12v 6Amp is 60w RMS. So you can be sure that the device that you buy will give you more than 55w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 60w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

BUY WITH CONFIDENCE!!!!! Please Check your PinCode service by Eb ay Powership before ordering If your pincode is not serviceable, then please do not order! 3 Feet Black 4 Gauge Ground Cable 17 Feet Blue 4 Gauge Power Cable Designed for Watt Power Gold Plated Connectors Oxygen-Free Copper 17 Feet 2 Channel Interconnect NSW Audio - Universal Car Amplifier Installation / Wiring Amp Kit 4 Gauge A high quality audio product needs high quality connections to produce the best sound possible. NSW Audio brings to you the amp kit 4gauge PC-04GA for your car entertainment system. The amplifier kit is a complete kit with all the essentials for a professional installation. The kit consists of a  17 feet Blue 4 Gauge Power cable  and a  3 Feet Black 4 Gauge Ground cable. It also has a  17 feet interconnect. All the cables are made of  oxygen-free copper  for pure uninterrupted power transmission. The cable jacket is extremely rugged yet flexible. It adheres to  CEA , the industry standard for wire gauge. The kit is  water and fire resistant  for maximum safety. The kit has  gold plated connectors  to prevent corrosion. It is designed for up to  Watts power transmission. About NSW Audio: NSW Audio is a decade-old company which designs and engineers high performance Car Audio Accessories for the US Market. Its product offerings include wires, inter-connects Bass Tube, Capacitors noise dampening material and other car accessories. Payment: Payment is accepted by Paisapay only. Paisapay is the safest way to pay on . Warranty and Guarantee Policy: If you are not satisfied when you receive your item, Please  Return The Product With original Un-Opened Condition [With All Accessories & Box]  within 7 days for a replacement. Please contact me before you return it. If item is defective after receiving, you can send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.   VERY IMPORTANT:   Please open the package

BUY WITH CONFIDENCE!!!!! Please Check your PinCode service by Eb ay Powership before ordering If your pincode is not serviceable, then please do not order! 3 Feet Black 4 Gauge Ground Cable 17 Feet Blue 4 Gauge Power Cable Designed for Watt Power Gold Plated Connectors Oxygen-Free Copper 17 Feet 2 Channel Interconnect NSW Audio - Universal Car Amplifier Installation / Wiring Amp Kit 8 Gauge A high quality audio product needs high quality connections to produce the best sound possible. NSW Audio brings to you the amp kit 4gauge PC-04GA for your car entertainment system. The amplifier kit is a complete kit with all the essentials for a professional installation. The kit consists of a  17 feet Blue 4 Gauge Power cable  and a  3 Feet Black 4 Gauge Ground cable. It also has a  17 feet interconnect. All the cables are made of  oxygen-free copper  for pure uninterrupted power transmission. The cable jacket is extremely rugged yet flexible. It adheres to  CEA , the industry standard for wire gauge. The kit is  water and fire resistant  for maximum safety. The kit has  gold plated connectors  to prevent corrosion. It is designed for up to  Watts power transmission. About NSW Audio: NSW Audio is a decade-old company which designs and engineers high performance Car Audio Accessories for the US Market. Its product offerings include wires, inter-connects Bass Tube, Capacitors noise dampening material and other car accessories. Payment: Payment is accepted by Paisapay only. Paisapay is the safest way to pay on . Warranty and Guarantee Policy: If you are not satisfied when you receive your item, Please  Return The Product With original Un-Opened Condition [With All Accessories & Box]  within 7 days for a replacement. Please contact me before you return it. If item is defective after receiving, you can send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.   VERY IMPORTANT:   Please open the package

PCB for High power output PA Series Amplifier, provides superb & Power full sound quality. With  2SCSA output devices the amp will put out close to 400 WATTS @ 8 OHMS and 800 Watt @ 4 OHMS.  Size 94 mm X 260 mm. FR4 Glass epoxy 1.6 mm THK Board 70  Microns copper. Included Schematic & BOM. Qty- 02 Nos. (TWO ONLY) PCB. FOR STEREO Note:- Amplifier Output Power 400 Watt @ 8 Ohms and 80 Watt @ 4 Ohms. We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Rs. only) Contact details:- E-Mail: Mob. No.