Sg90 micro servo motor

DESCRIPTION A servomotor is a rotary actuator that allows for precise control of angular position, velocity and acceleration. It consists of a motor coupled to a sensor for position feedback. It also requires a relatively sophisticated controller, often a dedicated module designed specifically for use with servomotors. A servomotor is a servomechanism. More specifically, it is a closed-loop servomechanism that uses position feedback to control its motion and final position. The input to its control is some signal, either analogue or digital, representing the position commanded for the output shaft. Working of Servo Motor:- Servos are controlled by sending an electrical pulse of variable width, or pulse width modulation (PWM), through the control wire. There is a minimum pulse, a maximum pulse, and a repetition rate. A servo motor can usually only turn 90 degrees in either direction for a total of 180 degree movement. The motor's neutral position is defined as the position where the servo has the same amount of potential rotation in the both the clockwise or counter-clockwise direction. The PWM sent to the motor determines position of the shaft, and based on the duration of the pulse sent via the control wire; the rotor will turn to the desired position. The servo motor expects to see a pulse every 20 milliseconds (ms) and the length of the pulse will determine how far the motor turns. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Specifications: Dimensions (L x W x H) = 0.86 x 0.45 x 1.0 inch (22.0 x 11.5 x 27 mm) Weight = 0.32 ounces (9 grams) Weight with wire and connecter = 0.37 ounce (10.6 grams) Stall Torque at 4.8 volts = 16.7 oz/in (1.2 kg/cm) Operating Voltage = 4.0 to 7.2 volts Operating Speed at 4.8 volts (no load) = 0.12 sec/ 60 degrees Connector Wire Length = 9.75 inches (248 mm) Universal "S" type connector fits most receivers

Description SG90 9G micro servo motor TowerPro RC Robot Helicopter Airplane controls Specification Connector wire length: 250mm Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque: 1.2kg / 42.3oz (4.8V);1.6 kg / 56.4oz (6.0V) Temperature Range: -30 to +60 Degree C Torsional moment: 1.5kg/cm Dead Band Width: 7usec Operating Voltage:4.8-6 Volts Net weight: 9g Package Includes 1 x Tower Pro Servo Motor   Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

SG90 9-Gram Micro 9g Servo For RC Airplane Car Boat Product information SG90 Micro 9g Servo For RC Airplanes Cars and Boats Shipped from Illinois USA. Specifications: Weight: 9g Size: 22mm x 11.5mm x 27 mm Operating Speed (4.8V no load): 0.12sec/60 degrees Torque (4.8V): 17.5oz/in (1.2 kg/cm) Temperature Range: -30 to +60 Degree Dead Band Width: 7usec Operating Voltage: Volts All Nylon Gear Connector Wire Length 150MM 100% Genuine SHIPPING ·         Product will be shipped on same day if the order is before 1pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 1pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

NOTE: DIY_IOT_SHOP is on vacation from 8-11 May, orders made on these days will be shipped only after 11-May. Features:   9 Gram Mini Micro Servo Light-Weight, High-Quality, and Lightning-Fast Designed to work with almost all Radio Control Systems Excellent performance brings you to another horizon of flight Perfect for R/C Helicopter, Plane, Car & Boat or trucks use Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, Airtronics & Aashai etc. Each servo comes with servo horns and fittings 245mm connector wire. Large stall torque of 1.6 Kg. Small size and Less Noise Specifications:   color: blue  Operating Speed (4.8V no load): 0.12sec/60 degrees  Stall torque: 1.2kg / 42.3oz(4.8V);1.6 kg / 56.4oz (6.0V)  operating voltage: V Temperature Range: - degrees C Dead band width: 7us Item size: cm Connector wire length: 24.5cm Package weight: 53g Dimensions: 22.6 x 21.8 x 11.4mm Weight: 9g Package includes:   1) 1 SG90 Servo  2) Servo horns and fittings set

Description Package Includes: 1 Piece new  Tower Pro SG90 Mini 9g Gear Micro Digital Servo Motor for microcontrolle rs It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  Tower Pro SG90 Mini 9g Gear Micro Digital Servo Motor for microcontrolle rs It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

This is a micro size servo motor metal gears. Metal gears provide strength/torque at the cost of higher weight and quicker wear-out. This servo motor gives stall torque of 1.8 Kg.cm at 4.8V and 2.2 Kg.cm at 6V. This is a good contender for small RC toys and robots. Servo motors are a type of brush DC motors with some extra features that make them ideal for use

Servo SG90 Mini 9G Dimension: 22mm x 11.5mm x 22.5mm Net Weight: 9 grams Operating speed: 0.12second/ 60degree (4.8V no load) Stall Torque (4.8V): 17.5oz /in (1kg/cm) Temperature range: -30 to +60 Dead band width: 7usec Operating voltage: 3.0V~7.2V Fit for ALL kinds of R/C Toys Coreless motor All nylon gear Dual ball bearing Connector wire length 150mm

WELCOME TO ROBOCENTRAL***   ***IMPORTED MINI 9G SERVO MOTOR ***             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! !!!Description!!! Widely used