Wireless transceiver module

Description Package Includes: 1 Piece new  ESP Serial WIFI Wireless Transceiver Module Send Receive AP+STA for Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  ESP8266 Serial WIFI Wireless Transceiver Module Send Receive AP+STA for Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description: ESP-01 ESP- is an ideal choice for hobbyist to start experimenting with IOT. The dimension of this module is 25mm x 15mm, with simple pin connections (standard 2×4 pin headers), using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the WiFi module. ESP ESP-01 Serial WIFI Transceiver Module is a cheap and easy way to connect to internet via WIFI to any microcontroller platforms like Arduino. You can use AT commands to connect to WiFi networks and open TCP/IP connections (without need to have TCP/IP stack running

Firmware Details: Version: ESP-01 Firmware:0.9.4 Default Baudrate: (configurable) VCC:3.3v Logic level:3.3v   The SOC has Integrated TCP/IP protocol stack.   ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.   ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.   Corresponding Interface:     SDIO 2.0, SPI, UART     32-pin QFN package     Integrated RF switch, balun, 24dBm PA, DCXO, and PMU     Integrated RISC processor, on-chip memory and external memory interfaces     Integrated MAC/baseband processors     Quality of Service management     I2S interface for high fidelity audio applications     On-chip low-dropout linear regulators for all internal supplies     Proprietary spurious-free clock generation architecture     Integrated WEP, TKIP, AES, and WAPI engines   Specification:     b/g/n     Wi-Fi Direct (P2P), soft-AP     Integrated TCP/IP protocol stack     Integrated TR switch, balun, LNA, power amplifier and matching network     Integrated PLLs, regulators, DCXO and power management units     +19.5dBm output power

Description ESP   ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.     Features:   - SDIO 2.0, SPI, UART -  32-pin QFN package -  Integrated RF switch, balun, 24dBm PA, DCXO, and PMU -  Integrated RISC processor, on-chip memory and external memory interfaces -  Integrated MAC/baseband processors -  Quality of Service management -  I2S interface for high fidelity audio applications -  On-chip low-dropout linear regulators for all internal supplies -  Proprietary spurious-free clock generation architecture -  Integrated WEP, TKIP, AES, and WAPI engines     Solutions -  Supports APSD for optimal VoIP applications -  Patented spurious noise cancellation algorithm for integration

ESP   ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.     Features:   - SDIO 2.0, SPI, UART -  32-pin QFN package -  Integrated RF switch, balun, 24dBm PA, DCXO, and PMU -  Integrated RISC processor, on-chip memory and external memory interfaces -  Integrated MAC/baseband processors -  Quality of Service management -  I2S interface for high fidelity audio applications -  On-chip low-dropout linear regulators for all internal supplies -  Proprietary spurious-free clock generation architecture -  Integrated WEP, TKIP, AES, and WAPI engines     Solutions -  Supports APSD for optimal VoIP applications -  Patented spurious noise cancellation algorithm for integration

Specs: 1.Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. Channels, Multi-point communication and frequency hopping to meet the communication needs 3.Built-in hardware CRC error detection, Multipoint communication address control. 4.Low-power V, only 1uA on Power down mode 5.Built-in 2.4Ghz antenna 6.Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. 7.Built-in voltage regulator 8.Standard DIP Pitch Interface for embedded applications 9.size: 34mm X 17mm X 1mm Pin Connections: Package includes: 2 x NRF24L01+ Module SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

ESP   ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.     Features:   - SDIO 2.0, SPI, UART -  32-pin QFN package -  Integrated RF switch, balun, 24dBm PA, DCXO, and PMU -  Integrated RISC processor, on-chip memory and external memory interfaces -  Integrated MAC/baseband processors -  Quality of Service management -  I2S interface for high fidelity audio applications -  On-chip low-dropout linear regulators for all internal supplies -  Proprietary spurious-free clock generation architecture -  Integrated WEP, TKIP, AES, and WAPI engines  

ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.     Features:   - SDIO 2.0, SPI, UART -  32-pin QFN package -  Integrated RF switch, balun, 24dBm PA, DCXO, and PMU -  Integrated RISC processor, on-chip memory and external memory interfaces -  Integrated MAC/baseband processors -  Quality of Service management -  I2S interface for high fidelity audio applications -  On-chip low-dropout linear regulators for all internal supplies -  Proprietary spurious-free clock generation architecture -  Integrated WEP, TKIP, AES, and WAPI engines  

Product Description Features: Ultra-thin ultra-small (mm) Good harmonics too easy to FCC / CE certification The penetration ability (measured through 8 floors) Using the latest version of the U.S. SI IC, stable performance Specification: Frequency range: M Sensitivity up to-121dBm Maximum output power: 20dBm Ddata transfer rate:kbps FSK, GFSK and OOK modulation power supply: V Ultra-low-consumption shutdown mode Digital received signal strength indication (RSSI) Wake time Automatic matching and two-way antenna switch control Configurable packet structure Preamble detection 64-byte send and receive data register (FIFO) Low power detection 8-bit ADC and temperature sensor Operating temperature range: - ° C Integrated voltage regulator Frequency hopping Power-on reset function Built-in lens adjustment Application: Remote Control; Remote meter reading; Home security alarm and remote keyless entry; Industrial Control; Telemetry Home Automation; Personal data records; Toy Control; Sensor networks; Tire pressure monitoring; Health Monitoring; Wireless PC peripherals; Tag readers Powered by Turbo Lister

Wireless Bluetooth RF Transceiver Module RS232 TTL (HC-06) bluetooth module better then HC-05 Allows your device to both send or receive the TTL data via Bluetooth technology wirelessly without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module Descriptions: Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. Built-in voltage regulator Standard DIP Pitch Interface for embedded applications size: 34mm X 17mm X 1mm Technical Parameters: Input Voltage: 1.9 ~ 3.6V Size: 34mm X 17mm X 1mm     Package Included: 1 x Arduino NRF24L01+ 2.4GHz Wireless Transceiver Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

NRF24L01+PA+LNA 1.1KM Range Module for Serious Long Range Wireless Projects This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost and Of course long range upto meters !! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier)   Specifications: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception (Multiceiver) ****Note**** NRF24L01+ Module Works on 3.3V. So you will require 3.3V Regulator circuit. If you don't want to waste your time. Do Consider Buying  NRF24L01+ Socket. Which includes everything you want to start with your NRF24L01+ RF Communication. Package Contains: 1 x NRF24L01+PA+LNA 1 x Long Range SMA connector Antenna For Any Technical Clarification. Please Click on Ask Seller ? We are Here to Help you. Any Questions Answered

NRF24L01+PA+LNA 1.1KM Range Module for Serious Long Range Wireless Projects This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost and Of course long range upto meters !! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier)   Specifications: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception (Multiceiver) = MM_contentVersion; } else if (navigator.userAgent && navigator.userAgent.indexOf("MSIE")>=0 && (navigator.appVersion.indexOf("Win") != -1)) { document.write(' /n'); document.write('on error resume next/n'); document.write('MM_FlashCanPlay = (IsObject(CreateObject("ShockwaveFlash.ShockwaveFlash." & MM_contentVersion)))/n /n'); } if (MM_FlashCanPlay) { document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); document.write(' '); } else { document.write(' '); document.write(' '); document.write(' The Buyer Appreciation banner is best viewed with Macromedia Flash Player 6 or higher. '); document.write(' Click here to get the latest Macromedia Flash Player. '); document.write(' '); document.write('

Features: This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What's more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to meters! (No barrier) Specification: Frequence: 2.4GHz~2.5GHz Operating voltage: 3 ~ 3.6V Max Current: 115mA Multi-frequency: 125 frequency Support up to six channels of data reception Package included: 1 x  NRF24L01+PA+LNA Module 1 x  SMA Antenna

Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane "3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn/'t through MAX, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one

It's HC-06 bluetooth module it acts only as slave. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. Works with any USB Bluetooth adapters. Default Baud Rate: ,n. Built

HC05 Bluetooth Module Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

Description Wireless Bluetooth RF Transceiver Module HC-05 RS232 Master Slave for Arduino Feature   Bluetooth Serial Transceiver Module with backboard.   Works with any USB Bluetooth adapters.   Easy to use and completely encapsulated.   This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard.   The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode.   Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data.   The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically.   This module power supply input is 4.5~6V, Please be careful Bluetooth module HC-05 Master and slave Two

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment. Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 10 x Interface Base Board Module For Further Details: Email:

ESP ESP-12E Serial WiFi Wireless Transceiver SMD Module with ADC, SPI and Extra Pinouts ESPE is an enhanced version ESP, improve peripheral circuitry increases impedance matching, the signal output is better, whether it is stable or anti-jamming capability, have been greatly improved! For users before selecting the ESP-12, it does not matter even if the product has been made, enhanced version is fully compatible with previous firmware, the pin has added six IO ports on the basis of the ESP-12, SPI leads. ESP is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor. ESP has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area. Features: SDIO 2.0, SPI, UART 32-pin QFN package Integrated RF switch, balun, 24dBm PA, DCXO, and PMU Integrated RISC processor, on-chip memory and external memory interfaces Integrated MAC/baseband processors Quality of Service management I2S interface for high fidelity audio applications On-chip low-dropout linear regulators for all internal supplies Proprietary spurious-free clock generation architecture Integrated WEP, TKIP, AES, and WAPI engines Solutions: Supports APSD for optimal VoIP applications Patented spurious noise cancellation algorithm for integration

See our ratings Add this shop to my favorites ESP ESP-12 Serial WiFi Wireless Transceiver SMD Module with ADC and Extra Pinouts ₹ Availability: