Arm board

Product Description ARM Core benefits The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are: A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. (for more information look  int type  page). CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks. Product includes 1x arduino board 1x USB cable Summary Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Outputs Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Powered by Turbo Lister

Description. "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">ARM Cortex-M3 Mini Stm32 Stm32F103ZEt6 Cortex Development Board

1 Channel Relay Board Module For PIC AVR DSP ARM Arduino AVRDuino This is a  1-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).   Features: 1 -Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250 V AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size R elay status indicator LED (red) Weight ： 10 0 g   Module interface specifications (3 wire)   1. External 12V 2. GND external GND 3. 1N interchange relay control interface (Control by 3.3V or 5V Logic)   Package included:   1 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

SAM3X8EA 32bit ARM Contex-M3 Due R3 Board Control  Arduino Due R3 AT91SAM3X8E   Description The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Features: 1. Microcontroller ：AT91SAM3X8E   2. Operating Voltage：3.3V  3. Input Voltage (recommended)：7-12V  4. Input Voltage (limits)：6-16V  5. Digital I/O Pins ：54 (of which 12 provide PWM output)  6. Analog Input Pins：12 7. Analog Outputs Pins：2 (DAC) 8. Total DC Output Current on all I/O lines ：130 mA 9. DC Current for 3.3V Pin：800 mA   10. DC Current for 5V Pin：800 mA  11. Flash Memory：512 KB all available for the user applications  12. SRAM：96 KB (two banks: 64KB and 32KB)   13. Clock Speed：84 MHz            Driver installation and usage procedure: ·                      Install  Arduino IDE ß  (click here) no extra driver needed for this card. ·                      Connect the board to computer, OS will auto detect ARDUINO DUE ·                      If the board is not auto detected, go to hardware device manager and choose update driver than choose advanced option “install from specific location” and point to the directory where your Arduino IDE is installed e.g. ”C:/program files/arduino-1.0.2/drivers” ·                      Launch Arduino IDE, select board as “arduino DUE” ·                      Select the com port OS created for the card(control panel  à  device manager) ·                      Open basics  à  blink sketch and upload. Package: 1 MCU BOARD  + 1 USB cable

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 10 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

This is a  4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Microcontroller(Arduino, AVRDuino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Features: 4-Channel Relay interface board Equiped with high-current relay, Rating are as follows: 1) 7A-250v AC 2) 10A-125V AC 3) 12A 120V DC 4) 10A 28V DC Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)   Has the fixed bolt hole and easy installation Small board PCB size four ways of relay status indicator LED (red) Weight ： 15 0 g Module interface specifications (6 wire) 1. External 12V 2. GND external GND Package included: 1 x  4 Channel Relay Board Module Note: Relay and Component Colors varies as per availability.

Arduino Compatible DUE R3 32 Bit ARM With FREE USB Cable Description: The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input / output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The SAM3X has 512KB (2 blocks of 256KB) of flash memory for storing code. The bootloader is preburned

About Cubieboard 2: Cubieboard 2 is a versatile single board computer based on ARM RISC architecture. It is suited for various applications such as Media Center, Home Automation, GPS/GSM based utilities, Allwinner, who is the manufacturers also provide a variety of operating system options. There is a very good community support available for hosting applications. Allwinner provides tool sets and examples to program GPIO pins. Operating Systems Available: Android based on 4.3, Linux (Ubuntu, Lubundu, Fedora, Archlinux etc.). There are various self interest groups manage/provide more efficient headless Linux operating system versions. Operating system can be installed on micro SD card or on board NAND flash. This site is official support site for Cubieboard 2.   Hardware Details: CPU ARM® Cortex™-A7 Dual-Core GPU ARM® Mali400MP2, Complies with OpenGL ES Memory 1GB DDRM RAM Storage 4GB internal NAND flash, uSD slot supports upto 64GB, SATA port supports up to 2TB. Power 5VDC input 2A or USB otg input or USB to round connector (included) Interfaces ethernet RJ 45, HDMI, 3.5mm audio, Programmable GPIO pins, 2 USB host, 1 USB OTG

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

Description: The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins, 12 analog inputs, 4 UARTs, a 84 MHz clock, an USB OTG capable connection, 2 DAC, 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. On board CAN controller for realizing CAN Protocol. The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it with a AC-to-DC adapter or battery to get started. The Due is compatible with all Arduino shields that work at 3.3V and are compliant with the 1.0 Arduino pinout. The Arduino Due can be powered via the USB connector or with an external power supply. A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Package Contents 1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has one (1) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free wheeling diode which will further protect your microcontroller from relay kick back. This is a 12V 1-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Free wheeling diode to protect your microcontroller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

This is a combo of the Board, case and Sata Cable. You can use it as a media server as well. It has a sata port. Here is the list of operating systems it can run: http://www.lemaker.org/resources/9-38/image_files.html Product Description: Banana Pro™ is an updated version of Banana Pi™ designed by the LeMaker Team. Try Banana Pro™ today and take advantage of the many enhanced features. Banana Pro™ is compatible with many Linux-based operating system and has many distributions specially developed for Banana Pi™ Hardware. Some of these distributions include  Lubuntu,  Android, Debian,  Bananian,  Berryboot,  OpenSuse,  Scratch,  Fedora,  Gentoo,  Open MediaVault, OpenWRT. Banana Pro™ also supports the BSD system. Banana Pro™ has a wide selection of home applications including: Building a low-cost computer, Servers (for Multimedia, Minecraft or other home servers), Video Game Emulators, Home Security Cameras and more. Banana Pro™ is an excellent educational learning tool that can be used for many projects including: building Multimedia projects,Robots, Arduino applications or Computer Programming with many popular programming languages available including Scratch (a drag and drop programming language for people beginning to learn how to code). Hardware Specification of Banana Pro TM Soc Allwinner® A20(sun 7i) CPU ARM ®  Cortex™-A7 Dual-Core1GHz (ARM v7 instruction set) GPU Mali400MP2 Complies with OpenGL ES  (hardware acceleration support) SDRAM 1GB DDR3 (shared with GPU) Power 5V @ 2A via MicroUSB (DC

This is a combo of the Board and the case. No need to buy case additionally. You can use it as a media server as well. It has a sata port. Here is the list of operating systems it can run: http://www.lemaker.org/resources/9-38/image_files.html Product Description: Banana Pro™ is an updated version of Banana Pi™ designed by the LeMaker Team. Try Banana Pro™ today and take advantage of the many enhanced features. Banana Pro™ is compatible with many Linux-based operating system and has many distributions specially developed for Banana Pi™ Hardware. Some of these distributions include  Lubuntu,  Android, Debian,  Bananian,  Berryboot,  OpenSuse,  Scratch,  Fedora,  Gentoo,  Open MediaVault, OpenWRT. Banana Pro™ also supports the BSD system. Banana Pro™ has a wide selection of home applications including: Building a low-cost computer, Servers (for Multimedia, Minecraft or other home servers), Video Game Emulators, Home Security Cameras and more. Banana Pro™ is an excellent educational learning tool that can be used for many projects including: building Multimedia projects,Robots, Arduino applications or Computer Programming with many popular programming languages available including Scratch (a drag and drop programming language for people beginning to learn how to code). Hardware Specification of Banana Pro TM Soc Allwinner® A20(sun 7i) CPU ARM ®  Cortex™-A7 Dual-Core1GHz (ARM v7 instruction set) GPU Mali400MP2 Complies with OpenGL ES  (hardware acceleration support) SDRAM 1GB DDR3 (shared with GPU) Power 5V @ 2A via MicroUSB (DC

Description Package Includes: 1 Piece new  STM32F103C8T6 ARM STM32 Minimum System Development Board Module For Arduino NEW

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by ULN IC hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - ULN IC used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Universal Development Board for Arduino, , PIC, AVR and ARM7, Raspburry Pi   (ENTER COUPON CODE WHEN YOU PROCEED TO PAY)   GET FREE 9% Discount Use Coupon CODE: 09DEAL       Product Overview   1.     About Digital and Analog IO Interfacing Board                                                                    If you are learning any microcontroller than input and output circuit is always important to experiment with any microcontroller. Digital and Analog IO Board is suitable for quick experiment with any microcontroller.   2.     Features Digital and Analog IO Interfacing Board having a following features:                                                               ·          Eight LEDs ·          Four Switches ·          One LDR (Light Dependent Resistor) (Light Sensor) ·          One Temperature Sensor (LM35) (Sensor) ·          One Variable Resistor (Preset/POT) (Sensor) ·          One Infrared receiver (TSOP) (Remote Control Sensor) ·          One Buzzer ·          One Relay Categories into Inputs/Outputs 1.        Digital Inputs ·          Switches ·          Infrared receiver (TSOP.        Analog Inputs ·          Variable Resistor ·          LDR ·          Temperature Sensor 3.       Digital and Analog Outputs ·          LEDs ·          Buzzer ·          Relay Dimensions (LxWxH) - Cms: 6.5 CM X 6.5CM Datasheet:  http://www.mediafire.com/view/6c3dmdhpw3rlwdh/Digital_and_Analog_IO_Board.pdf

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has 2 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and IC will further protect your microcontroller from relay kick back. This is a 12V 8-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Description: Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two Two on-board relay which can switch up to 7Amps. Relays terminals (COM, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free-wheeling diode which will further protect your microcontroller from relay kick back. This is a 5V 2-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.    Features: 1.     Equipped with high-current relay 7A@250VAC / 10A@24VDC.  2.     It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc. 3.     High quality screw terminals (Terminal Block) provided (COM, NC, NO) for quick and easy connection. 4.     Free wheeling diode to protect your microcontroller. 5.     Input Signal Pin connected to Burg stick for easy accessibility. 6.     LED Status indicators to indicate the relay ON/OFF status. 7.     Mounting holes provided. Package Contains: 1.      1 x Two channel 5V relay Module.    

Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two (2) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by Transistor hence your input device, such as Arduino, is protected from relay circuit and Transistor will further protect your micro-controller from relay kick back. This is a 12V 4-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - BC 547 Transistor used to drive Relays (better than Transistor Drive Circuits) - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

Product Description ARM Core benefits The Due has a 32-bit ARM core that can outperform typical 8-bit microcontroller boards. The most significant differences are: A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. (for more information look  int type  page). CPU Clock at 84Mhz. 96 KBytes of SRAM. 512 KBytes of Flash memory for code. a DMA controller, that can relieve the CPU from doing memory intensive tasks. Pin Mapping:  SAM3X Pin Mapping page Product includes 1x arduino board 1x USB cable Summary Microcontroller AT91SAM3X8E Operating Voltage 3.3V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 12 provide PWM output) Analog Input Pins 12 Analog Outputs Pins 2 (DAC) Total DC Output Current on all I/O lines 130 mA DC Current for 3.3V Pin 800 mA DC Current for 5V Pin 800 mA Flash Memory 512 KB all available for the user applications SRAM 96 KB (two banks: 64KB and 32KB) Clock Speed 84 MHz Powered by Turbo Lister

A single-board computer (SBC) is a complete computer built on a single circuit board, with microprocessor(s), memory, input/output (I/O) and other features required of a functional computer. iWave’s new iW-RainboW-G23S RZ/G1C Single Board Computer runs Linux on a Renesas RZ/G1C, power efficient Dual-core ARM Cortex A7 CPU @ 1GHz. The iW-RainboW-G23S is the industry’s first Single Board Computer launched based on Renesas RZ/G1C SoC, which debuted earlier this year. iWave has previously adopted the Renesas RZ/G1H, RZ/G1M and RZ/G1N with the Qseven 2.0 form-factor System On Modules and RZ/G1E in SODIMM form factor System On Module. iWave also offers development kits for all these SOMs for evaluation purpose.

Features The is a 5V 8-Channel Relay interface board with optocoupler which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSC, and so on. Can be powered by 5V DC Source (From USB) Or from the same source powered to Arduino or any other micro controller. Equipped with high-current relay 10A@250 VAC / 10A@28 VDC which can control both AC and DC appliances such as Solenoids, Motors, lights, fans etc High quality screw terminals provided for each relays (C, NC, NO) for quick and easy connection Interfaced with optocouplers to isolate relays & protect your microcontroller. Input Signal Pin connected to Burg stick for easy accessibility LED Status indicators to indicate the relay ON/OFF status. Dimension: 13.4 x 5.3 x 1.7cm (5.28 x 2.09 x 0.67in) Mounting holes provided Shipping contents 1 x 5V DC 8 Channel relay board as shown

Description "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">NEW LilyPad 328 Module ATmega328P Main Board 16M For Arduino Technical parameters:   Package Includes: 1 Piece new  "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">NEW LilyPad 328 Module ATmega328P Main Board 16M For Arduino Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

See our ratings Add this shop to my favorites STM32F103C8T6 ARM STM32 Minimum System Learning Evaluation Development Board Module ₹ Availability:

5V 4--Channel Relay Module for Arduino PIC ARM DSP AVR Electronic NEW Product Description 1. module with pine le relay control, ac voltage maximum 250 V, ac current maximum 10 A, dc voltage maximum 30 V, dc current maximum 10 A;  2. the transistor drive, drive ability;  3. working voltage 5 V  4. has the fixed bolt hole and easy installation  5. small board PCB size: 7.2 cm * 4.8 cm  6. weight ：60 g Package included: 1 PCS Rs. 410 Shipping is all over India. Please Provide Complete Address and phone number. See Shipping description for details Shipment will be sent between 3.00 pm to 4.00 pm except Sundays/Public Holidays.  Tracking details will be provided within 12hours after shipment is booked. Most shipments will be sent through Speed Post/Registered Post

1 x ACS712 30A AC / DC  CURRENT SENSING MODULE ARDUINO, ARM and other MCU *** MUST HAVE FOR STUDENTS  AND HOBBYIST ***  This current sensor gives precise current measurement for both AC and DC signals. These are good sensors for metering and measuring overall power consumption of systems. The ACS712 current sensor measures up to 30A of DC or AC current. Product description: Current sensor chips: ACS712ELC-30A Pin 5V power supply, on-board power indicator Can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A No test current through the output voltage is VCC / 2 PCB board size: 31 (mm) x13 (mm) Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact! You Will Get: ACS712ELC-30A module  = 1 pcs Shipment Details: We ship the item anywhere

Features: Brand new and high quality. This module can be used with Special Sensor Shield V4.0. You can do some simple design about it. This is 2-Channel 5V Relay Module for PIC ARM AVR DSP. It can be able to control various appliances, and other equipments with large current. Easy to be controlled by a lots of Microcontrollers. Just use 5v input signal to control. Equiped with high-current relay, AC250V 10A, AC150V 10A; DC30V 10A, DC28V 10A. size:3.9cm x 5.1cm (1.54inch x 2.01inch).   Package contents: 1 x   5V 10A   2-Ch  Relay Board Module FEED BACK We request buyers to leave all star feedback if satisfied and if not satisfied they can communicate and contact us so we can take appropriate action.     Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback      Your feedback is important for us to grow our business on , so please do leave feedback