Dc adjustable power converter

DC to DC Boost Power Converter Module XL Original, Best Quality @ Lowest Price Features Wide 5V to 32V Input Voltage Range Wide Output Voltage 5V to 35V Fixed 400KHz Switching Frequency Maximum 4A Switching Current Excellent line and load regulation High efficiency up to 94% Built

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

LM Voltage Display Module DC-DC Buck Converter Step-Down Power Module   This is an LM DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W), please add a heat sink on it. Features  Adjustable Output Version Adjustable Version Output Voltage Range, 1.2V to 37V ±4% Max Over Line and Load Conditions Available

Description Package Includes: 1 Piece new  XL Adjustable DC-DC Step-up Boost Power Converter Module Betr thn LMA It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  XL6009 Adjustable DC-DC Step-up Boost Power Converter Module Betr thn LM2577 4A It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9560773418 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL

Description. "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">LM2596 DC Adjustable Step-Down Power Module + LED Voltmeter + USB +2.54mm Needle Technical parameters: 1 Piece new   "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">LM2596 DC Adjustable Step-Down Power Module + LED Voltmeter + USB +2.54mm Needle Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We maintain high quality and shipping standards  We strive for 100% positive feedback and work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Lm 317 regulator IC BASE ADJUSTABLE POWER SUPPLY kit -DIY FEATURES: Adjustable Output Voltage From 1.6 to 25 Volts DC Input from 12V to 35V DC/AC Inputs and output connected to terminal blocks  Maximum Load: 1 Amps PACKING CONTAINS: 1x LM317 REGULATOR KIT. WE MAKE A GOOD PACKING, AND TAKE MANY PRECAUTIONS,EFFORTS TO MAKE THE  REACH BUYERS IN SAFE AND GOOD CONDITION. Kindly make sure to inspect the parcel condition before accepting the parcel from courier company / delivery person and signing their receipt.   In case of any signs of pilferage or tampering or the item is damaged or short then, please do not accept the package. Notify us immediately so that we can take necessary action.   Octroi & local levies, if any, will be borne by the buyer at the time of delivery.   * For Any other queries Please ask question Prior Buying the item                                                                         DISPUTES

  Description Package Includes: 1 Piece new  5A XL4015 DC-DC Step Down Adjustable Power Supply Module LED Lithium Charger

DC to DC Buck Power Converter Module LM Original, Best Quality @ Lowest Price Features • Adjustable Output Voltage Range 1.23 V − 37 V  • Guaranteed 3.0 A Output Load Current  • Wide Input Voltage Range 3V to 40 V  • 150 kHz Fixed Frequency Internal Oscillator  • TTL Shutdown Capability  • Low Power Standby Mode, typ 80 A  • Thermal Shutdown and Current Limit Protection  • Internal Loop Compensation  • Moisture Sensitivity Level (MSL) Equals 1  • Pb−Free Packages are Available  Applications  • Simple High−Efficiency Step−Down (Buck) Regulator  • Efficient Pre−Regulator for Linear Regulators  • On−Card Switching Regulators  • Positive to Negative Converter (Buck−Boost)  • Negative Step−Up Converters  • Power Supply for Battery Chargers • Solar Projects • Robo Power Supply  :Package Includes: 1 X LM DC to DC Buck Converter Module For any  queries  please feel free to write us using  "Ask Seller a Question"  link  OR  Call us on  DC to DC Buck Converter Module LM Based, LM, DC to DC, Converter, Buck, Buck Converter, LM DC to DC Buck Converter Module,

XL DC-DC step up module, better than LM, with adjustable booster power supply module, Output Max Current 4A   This module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency. Description: XTW is a 4 a switch current high-performance step-up (BOOST) module. The XLE1 module USES the second generation of high frequency switch technology as the core chip, LM performance far beyond the first generation of technology.  XL booster module cost is lower, performance is more outstanding, LM module will be eliminated. Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range; Low ultra wide output voltage 5 v ~ 35 v; Built-in 4 a efficient MOSFET switch tube, make efficiency up to 94%; (LM current only 3 a)/ High switching frequency, 400 KHZ, can use the small capacity of the filter capacitor can achieve very good effect, ripple smaller and smaller Operating temperature:-℃   Note: The output voltage must be higher than the input voltage. IN-IN + input Positive Input Negative! Positive output OUT + OUT-output negative Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: input current Vout: Output Voltage Iout: output current Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Module properties: unfenced step-up (BOOST) The input voltage: 3-32 v Continuous adjustable output voltage: 5v-35 v  Input current: 4 a (Max), no-load 18 ma Module size: 44.7 (mm) x21.7 (mm) Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: Output ripple: 50 mv (the bigger the higher the voltage, current and ripple) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

DC-DC adjustable step-down power Supply module, 5A Large current Areas of application: DIY mobile power supply, car power, communications equipment power supply, etc. input voltage: 5V-32V output voltage: 0.8V-24V output current: peak 5A (more than 3.5A work need to strengthen The cooling) Conversion efficiency:90% size:mm(L*W*H) The step-down module can easily reach 4 a, 50 w, add heat sink can reach 75 w, under the condition of extremely high price!!!!! Modules window: 5 A high-power high efficiency low ripple Module performance and features: Module properties the isolation step-down module (BUCK) 4-38 v input voltage: (please try not to exceed 38 v input) Output voltage: v continuous adjustable Output current: 0-5 A, it is recommended to use

Module properties: unfenced step-up (BOOST) The input voltage: 3-32 v Continuous adjustable output voltage: 5v-35 v  Input current: 4 a (Max), no-load 18 ma Module size: 44.7 (mm) x21.7 (mm) Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)

Manual adjustable input voltage Between 110V and 240V. •Adjustable Rating:+/-20% output voltage. •Lower Power consumption, Lower Temperature, high efficiency. •Short circuit/Over load/ Over voltage/ Over temp protection. •Auto-recovery after protection. •Design with Built-in EMI Filter, improve signal precision. •Output power: 12V 10A. •Suitable for CCTV, Radio, Camera, Computer project