Digital module board

Description Package Includes: 1 Piece new  5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN Line 4 Phase It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  5V Stepper Motor 28BYJ-48 With Drive Test Module Board ULN2003 5 Line 4 Phase It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

LG Digital Notice Board Kerala IPS Pannel Portraite installation centalised control and distribution 3 years warranty. For more info related to our contact no:9567866472 or email address: sales@crystaltechnologies.in

This is L293D based H-Bridge motor driver board for driving DC motors and is ideal for robotics applications. PTR CONNECTORS FOR EASY CONNECTIONS USER ACCESSIBLE MOTOR ENABLE PINS FACILITY ON BOARD V POWER REGULATOR, NO NEED TO GIVE EXTERNAL 5v POWER SUPPLY ON BOARD POWER LED AND POWER ON OFF SWITCH WIRE CONNECTOR FOR INPUT SIGNAL

THIS L293D DRIVER MODULE IS A MEDIUM POWER MOTOR DRIVER PERFECT FOR DRIVING DC MOTORS AND STEPPER MOTORS. IT USES THE POPULAR L293D MOTOR DRIVER IC. IT CAN DRIVE 4 DC MOTORS IN ONE DIRECTION, OR DRIVE 2 DC MOTORS IN BOTH THE DIRECTIONS. FEATURES AND USAGE L293D motor driver IC. Male burg stick connectors for supply, ground and input connection Screw terminal connectors for easy motor connection This motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontroller, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms

New L293D motor shield, the input voltage DCV 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES The Device is a mnolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC  and stepping motors) and switching power transistors.To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use

Signal Output function: Brand new and high quality. Voltage: 5V. Diameter: 28mm. Step angle: x 1 / 64. Reduction ratio: Line 4 phase can be driven by ordinary uln chip can also be connected

Item Description:     Brand new and high quality Voltage: 5V Diameter: 28mm Step angle: x 1 / 64 Reduction ratio: Line 4 phase can be driven by ordinary uln chip can also be connected

Digital Touch Sensor TTP223B capacitive touch switch module for Arduino Product Description   Specification: The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode. Features: Low power consumption Power supply for 2 ~ 5.5V DC Can replace the traditional touch of a button Four M2 screws positioning holes for easy installation Package Contents: 1x  Digital Touch Sensor  TTP223B  capacitive touch switch module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

4Pin Digital Thermal Thermistor Temperature Sensor Module For Arduino Features: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

Photo Resistor 3 Pin  Description Features:  • For Light intensity detected,light brightness sensors, Smart car module  • Using the sensitive type photosensitive resistance sensor  • Waveform of the comparator output signal is good,strong driving ability  • With adjustable potentiometer can adjust and detect the brightness of the light  • Come with bolt holes for easy installation Specifications:  • Using the sensitive type photosensitive resistance sensor  • The comparator output signal clean waveform is good, driving ability, than 15mA.  • With adjustable potentiometer can adjust the brightness of the light detected  • Working voltage 3.3V-5V  • The output form: DO digital switching outputs (0 and 1)  • With bolt holes for easy installation  • A small board PCB size: 3.2cm x 1.4cm  • Using a wide voltage LM393 comparator  Module for Use:  1 The photosensitive resistor module most sensitive to ambient light, generally used to detect the brightness of the ambient light, triggering micro-controller or relay modules;  2 The module brightness of ambient light reach the set threshold, DO-side output high when the ambient light level exceeds the set threshold, DO-ended output low;  3 DO output can be directly connected with the micro-controller through the micro-controller to detect high and low, thereby detecting changes

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT  HIGH QUALITY FR-4 BOARD Light Sensor For Arduino / PIC / AVR Description Module Features:    1, Using sensitive photosensitive resistance sensor    2,The comparator output signal is clean, good waveform, driving ability, more than 15mA.    3, With adjustable potentiometer to adjust the brightness of the light detection    4,The working voltage 3.3V-5V    5, DUAL OUTPUT form: DO digital switching outputs (0 and 1) and AO analog voltage output     6,A fixed bolt holes for easy installation    7, PCB Size: 3.4cm x 4.0cm   8, Using a wide voltage LM393 comparator Product wiring instructions:   1, VCC positive power supply 3.3-9V   2, GND power supply is negative   3, DO TTL switching signal output     4, AO analog output Please contact us for any doubt.Please give us positive feed back.Your feed back is very important for us. Happy to help you.We shipped our material within 2 working days after getting confirmation of payment. contact us- Mob:-     (From 10 AM to 9 PM)    Powered by Turbo Lister

Description The module is based on a touch-sensing IC  (TTP223B) capacitive touch switch module. In the normal state, the module output  low, low power consumption; When a finger touches the corresponding position,  the module output high, if not touched for 12 seconds, switch to low-power mode. Jog type: the initial state is low, high  touch, do not touch is low (similar touch of a button feature) Module can be installed

Description 100% brand new and high quality Using the NTC thermistor sensor, good sensitivity The comparator output signal clean waveform is good, driving ability, than 15mA Adjust the temperature distribution bit detection threshold Using a wide voltage LM393 comparator With bolt holes for easy installation Module Usage The thermal resistance of the module is very sensitive to the ambient temperature and is generally used to detect the ambient temperature Through the adjustment of the potentiometer one can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

We all know how helpful it is to remember something that is taught visually to us rather than the one that is read through pages after pages. How beneficial would it be for students to understand a chapter visually in class. Smart classes use all interactive modules like videos and presentations and these visually attractive methods of teaching becomes appealing to students who are already struggling with the traditional method of teaching in a classroom. Specifications: Smart Interactive White Board » Size:- 633/16″W*501/16″H*5116″D (160.5*127.2*12.8cm) » Active Screen Area:- (maximum Interactive, Projected image) 615/8″*463/16″ (156.5*117.3cm)77″(195.6cm) diagonal 4:3 aspect ratio » Weight:- 51lb. (23.2kg) » Shipping size:- 70″W*531/2″ H*45/16″D (177.8*135.9*11.0 cm) » Shipping Weight:- 63 lb.3 oz (28.7kg) Key Features » Touch Functionality:- Smart Interactive Board can be used by Finger or Pen & can erase by selecting the Eraser Green Board » Dimension:- 1219.20 * 1259 mm / 48″*49.5″(+or-2″) Projector » Short throw projector Integrated Visualizer » Image resolution:- 1600*1200 » Power Supply:- 12V » Capture Size:- Max. A4 page » Interface:- USB 2.0 Computer » Processor:- Dual Core/i3 » Ram:- 2gb upgradeable to 8gb » HDD:- 320 GB Upgradeable to ITB » KBD & Mouse:- Laptop style KBD & Mouse » OS:- DOS » Ports:- HDMI, VGA, 4USB (2 on the Top), RS232*1, RJ 45*1 » Software supported:- Window Warranty » 1 Year Onsite Frame External Dimension » 3048*1308 mm (120″*51.5″+/-2-3″) Standard Accessories » Packed Content List/ In the BOX:- Active, Cordless, Active pen*1,6ms USB cable*1, Software, CD*1, Wall Mounting Brackets*1 set, User Manual for software and installation Modern Technologies gives you top class branded Digital Teaching Device with affordable price. We also provide installation & maintenance services. For more info please visit www.moderntechnologies.in or directly call us: 9810760848, 9310760848, 01294014741.