Patch panel

CableWholesale 19-Inch x 1U Blank Keystone Patch Panel with 16-Port (68PB-). This blank keystone patch panel is perfect for creating your own patch panels.

CableWholesale 1.75 x 19 x 4 Inches 1 Unit Patch Panel Hinged Wall Bracket (68BP-U). This 1 Unit (1U) hinged wall bracket makes short work of mounting network patch panels. The hinge allows for easier access to the back side of mounted patch panels. It is compatible with CAT5E CAT6 and other patch panels. The dimensions are: height 1.75 inches width 19 inches and depth 4 inches. Product includes washers and screws to attach devices to the bracket.

CableWholesale Blank Keystone Patch Panel 48 Port Rack Mount (68PB-). Rack mount 48 Port Blank Keystone Patch Panel 3ULifetime Warranty

The RJ45 CAT 5 patch panel is 19 inch rack mountable and supports both 568A and 568B installations. Compatible with both 110 and Krone punch down tools. Features: category 5 rated. Supports 100 Mbps Ethernet. Accepts either 110 or Krone punch-down tools. This product is guaranteed for life! Supports 568A and 568B installation. Some patch panels only support one installation, our dual support guarantees compatibility with all networks

Electrical specifications ·          Frequency range -MHz ·          V.S.W.R =1.5 ·          Gain-dBi 7-8 ·          Vertical  Lobe width -° ·          Horizontal  Lobe width  -° ·          Polarization  Vertical or Horizontal ·          Impedance-O 50 ·          Maximun Input Power-W 50 ·          Lightning protection DC Ground Mechanical specifications ·          Connector N-K or other ·          size-mm ·          Net weight-g 600 ·          Installation -mm Hanging ·          Operation Temperature-°C -

C2G / Cables to Go Blank Keystone/Multimedia Patch Panel 12 (Black). Customize your patch panel configuration for ethernet or multimedia

C2G / Cables to Go Blank Keystone/Multimedia Patch Panel 32 (Black). Customize your patch panel configuration for ethernet or multimedia

D LINK PATCH PANEL 24 PORT Features; *Meets and exceeds ANSI/TIA 568 C.2 cat6/cat.5e specification *six-port RJ45 modules applied *Support 24 port *ID stripes for identifying port allocations *IDC competible for 110 & crone tools *Terminating 4 pairs, AWG unshielded cables *Tslot type sturdy cable management bar with cable ties *universal labels color-coded for T568A and T568B wiring schemes

Monoprice Keystone Jack Panel 24 ports. This keystone panel fits into a standard 19 wide equipment rack and measures 1U tall (1. 75). It accommodates up-Inch 24 individual keystones allowing you-Inch build a custom patch panel with network audio and or video connections. The panel is constructed of black painted steel. Each port is individually numbered.

GLS Audio XLR Female Jack 3 Pin - Panel Mount Jacks D Series Size XLR-F - 4 PACK. We are offering these New Professional Series Female XLR Panel Jacks by GLS Audio. We are selling them at an incredible savings per 4 pack! These are the same high quality jacks that we use on our snakes and patch bays. The GLS Audio XLR jacks are very Heavy Duty and comparable to Switchcraft and Neutrik.

RJ45 Jack Contact (Material): Phosphor Bronze with Nickel Plated, 155/622 Mbps ATM, Power Over Ethernet (PoE), Voice, T1, ISDN, Fitting 1U 24 Port High-Density Keystone Panel, 23-26 AWG Cable, UTP Plug 30U, Universal Labels Color-coded For T568A and T568B Wiring Schemes

Untitled Document Trendnet 48-Port Cat6 Unshielded Wallmount Or Rackmount Patch Panel Tc-P48C6 Description SKU: IB-IBAZ00AZK4F Ideal solution for Ethernet, Fast Ethernet and Gigabit applications Gigabit ready rack mount 48-port panel Cat6 patch panels deliver a steady 250Mhz connection to copper Gigabit switches Cat6 patch panels deliver a steady 250 Mhz connection to copper Gigabit switches Ideal for Ethernet, Fast Ethernet and Copper Gigabit Ethernet (Base-T) network applications Backward compatible with Cat. e, and 6 cabling Use with TRENDnet TC-PDT Punch Down Tool, BAZK4D Use with TRENDnet s TC-CT68 RJ-11/RJ-45 crimp/cut/strip tool, BAZK4G

The item for offer is Fluke Networks Coaxial adapter for use with Fluke networks Microscanner. Set of office ID and wire map adapter is also available with us and is listed on . If you have bought microscanner or planning buy one from us on wire map adapter is included with meter. This is discontinued product but since it is passive connector it should work with newer versions of fluke meters. In case it does not work with your equipment for any reasons you can return and claim full refund. The adapter has UTP of which only two wires are pre-crimped and other side you would notice co-aaxial male. This is perfect adapter to plug into any UTP cable tester to check co-axial cable used for CCTV applications. As well you can test continuity of horizontal cabling or identify the Information outlet vis-a-vis outlet on patch panel. There are

This sale is for Fluke Networks wire map adapter. Office ID listed separately for purchase. If you have bought microscanner or planning buy one from us on wire map adapter is included with meter. This is discontinued product but since it is passive connector it should work with newer versions of fluke meters. In case it does not work with your equipment for any reasons you can return and claim full refund. As well you can test continuity of horizontal cabling or identify the Information outlet vis-a-vis outlet on patch panel. If your UTP Cable tester measures length of UTP cable then with this adapter you may be able to measure length of coaxial cable as well. Fluke Microscanner Introduction MICROSCANNER PRO™ is an all-in-one network tester that you can use to verify twisted pair and coaxial cables, measure length and distance to faults via TDR, and identify active networks and hubs. Features • Tests unshielded twisted pair (UTP), shielded twisted pair (SSTP) and coaxial cable • Pinpoints opens, shorts, crossed and split pairs • Measures cable length via TDR • Checks and verifies wiremap • Generates four different tracing tones to help identify users • Identifies active networking hubs, switches, and PCs. Operating Mode MODE Press MODE to select the desired test. The available modes are: • WIREMAP • OFFICE IDENTIFIER • LENGTH • TONER Calibration Mode MODE + ON OFF Turn the MICROSCANNER PRO OFF, then hold the MODE key down while pressing the ON key to start Calibrate mode. Use MICROSCANNER to calibrate cable lengths of more than 50 feet (15 meters) and up to feet (457 meters). Setting the NVP percentage: Once

✔TRUE CAT7 PERFORMANCE - FEDUS Cat 7 Shielded Ethernet Cable provides performance of up to 10000 Mbps (or to 10 Gigabit per second); High bandwidth of up to 600 MHz, Shielded Cat7 and the improved quality in twisting of the pairs, Cat7 can reduce any signal interference to the full extent. Allow you to stream HD videos, high-speed data transfer for server applications, cloud storage music, surf the net, play games at Hyper Speed online ✔HEAVY DUTY & DIRECT BURIAL - The double shielded Cat7 Ethernet cable is super-efficient in reducing EMI/RFI Interference and provide the highest fidelity for long distance data transmission. 4 Pairs 24AWG 100% pure & thick shielded twisted pair of copper wires, Aluminium foil shield And UV-resistant PVC jacket, Cat7 is waterproofed & anti-corrosion and more durable & flexible. It can withstand direct sunlight and extreme cold & humid & hot weather. Suitable for both outdoor and indoor use. ✔S/FTP & 24AWG & SUPERIOR PERFORMANCE - Made of 4 shielded foiled twisted pair(S/FTP) and Multi strand OFC wires(24AWG) which supports bandwidth up to 600MHz and boost the speed of data transmission up to 10Gbps Compared with other 32AWG Ethernet cable, 24AWG Cat7 is thicker, a lot faster and stable in data transferring, which is perfectly suitable for AI smart products, Cloud data Server and other smart home & office products that require high speed & high-performance network ✔RJ45 CONNECTORS & WIDE COMPATIBILITY - With two shielded RJ45 connectors at both ends, the Cat7 Ethernet cable works perfectly with networking switch, IP Cam, Television, routers, ADSL, Adapters, Modem, PS-3, PS-4, X-box, Patch panel, Servers, Networking Printers, Net-gear, TP-l-ink, NAS, VoIP phones, laptop, Coupler, Hubs, Keystone jack, Smart TV, I-mac and other device with RJ45 connectors. Also Backward compatible with Cat5/Cat5e/Cat6/Cat6e. ✔FEDUS CARES - Backed by a FEDUS 6 Month Warranty and our friendly customer service are always standing by to help, Each cable has passed FLUKE CHANNEL Test to provide you with long lasting confidence in the quality of your purchase. our friendly customer service is always standing by to help.https://www.fedus.in/products/cat7-ethernet-network-outdoor-indoor-cable-10-meter-32-8-feet-pure-bare-copper-24-awg-10gbps