Pcb power amplifier

power amplifier and speaker. brand new 1100 watts JBL. sony power amplifier. 4/3 channel

PCB for High power output PA Series Amplifier, provides superb & Power full sound quality. With  2SCSA output devices the amp will put out close to 400 WATTS @ 8 OHMS and 800 Watt @ 4 OHMS.  Size 94 mm X 260 mm. FR4 Glass epoxy 1.6 mm THK Board 70  Microns copper. Included Schematic & BOM. Qty- 02 Nos. (TWO ONLY) PCB. FOR STEREO Note:- Amplifier Output Power 400 Watt @ 8 Ohms and 80 Watt @ 4 Ohms. We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Rs. only) Contact details:- E-Mail: Mob. No.

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit): All resistors (1% metal film) Power resistors Faston connectors Silpad 400 insulators Silver Mica compensation capacitors MJE drivers MJL output transistors (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors Main Heat Sink (100 mm x 182 mm x 19 mm - 1 No.) and Heat Sink for LME No. Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 5 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail:

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 7 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Branded components): All resistors (1% metal film)  Power resistors (CRC) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) Main Heat Sink required (100 mm x 260 mm x 32 mm - 1 No.) - NOT INCLUDED. Note:- Amplifier Output Power 350 Watt @ 8 Ohms and 550 Watt @ 4 Ohms (Power supply: Volt 7 Amps) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors,) Rs./- Shipping charge extra. Contact details:- E-Mail: Mob. No.:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  2SCSA output devices. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit without Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors (Manufacturer: Toshiba ) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 250 Watt @ 8 Ohms and 400 Watt @ 4 Ohms (Power supply required: Volt 6 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Contact No.: Mob. No. 

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 8 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 8 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Reputed Brands component): All resistors (1% metal film)  Power resistors (Stead) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) MAIN HEAT SINK INCLUDED. Contact details:- E-Mail: Mob. No.

Other Items Feedbacks About Us Contact Us Add To Favorites CNB439 - New Original LM High-Performance 68W Audio Power Amplifier with Mute Description The LM is a high-performance audio power amplifier capable of delivering 68W of continuous average power to a 4Ω load and 38W into 8Ω with 0.1% THD+N from 20Hz–20kHz.    FEATURES DESCRIPTION  The LM is a high-performance audio power  68W Cont. Avg. Output Power into 4Ω at VCC = amplifier capable of delivering 68W of  continuous ±28V average power to a 4Ω load and 38W into 8Ω with • 38W Cont. Avg.  Output Power into 8Ω at VCC = 0.1% THD+N from 20Hz–20kHz. ±28V The performance  of the LM, utilizing its Self • 50W Cont. Avg. Output Power into 8Ω at VCC = Peak  Instantaneous Temperature (°Ke) (SPiKe) ±35V protection circuitry, puts it

LM Overture™ Audio Power Amplifier Series High-Performance 68W Audio Power Amplifier w/Mute.  L M FEATURES DESCRIPTION The LM is a high-performance audio power W Cont. Avg. Output Power into 4Ω at VCC = amplifier capable of delivering 68W of continuous ±28V average power to a 4Ω load and 38W into 8Ω with • 38W Cont. Avg. Output Power into 8Ω at VCC = 0.1% THD+N from 20Hz–20kHz. ±28V The performance of the LM, utilizing its Self • 50W Cont. Avg. Output Power into 8Ω at VCC = Peak Instantaneous Temperature (°Ke) (SPiKe) ±35V protection circuitry, puts it

LM Overture™ Audio Power Amplifier Series High-Performance 56W Audio Power Amplifier w/Mute.   FEATURES DESCRIPTION:   The LM is a high-performance audio power amplivfier IC• 56W Continuous Average Output Power into amplifier capable of delivering 56W of continuous 8Ω average power to an 8Ω load with 0.1% THD+N from • 100W Instantaneous Peak Output Power 20Hz–20kHz. Capability The performance of the LM, utilizing its Self • Signal-to-Noise Ratio ≥ 95 dB(Min) Peak Instantaneous Temperature (°Ke) (SPiKe) • An Input Mute Function protection circuitry, puts it

This amplifier plate adopts the official standard circuit design, chip selection USES is the United States imported original Long Ding micro class D power amplifier chip.This chip is strong not strong you can go to check its information.Good product chip share and the vast number of music lovers, this is our consistent principle!The power amplifier has a high efficiency, large power,

Vktech 10PCS Terminal Binding Post Power Amplifier Dual 2-way Banana Plug Jack. 100% Brand new and high quality24k Gold platedThis connector is made by pure copper(Non-magnetic).Color coded plastic insulation jacket for easier recognitionScrews locking no SolderingSize: mm(L W H)Quantity: 10PCSincludes 10 x Terminal Binding Post

Sound barrier.4channel amp.good candishon.call me 921074ooo8

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Amplifier Kit with Main heat sink and Power Supply Kit): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply Transformer required: Volt 5 Amps- NOT INCLUDED) With Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 2 x 150 Watts @ 8 Ohms and 2 x 250 Watts @ 4 Ohms. Required Power Supply transformer Volts, 10 Amps (Not Included). Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- El. cr ) Fastron connectors Silpad insulators Silver Mica compensation capacitors (Manufacturer:Kemet/ACE) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors. Electrolytic Capacitors (Manufacturer: Keltron) Note:- Amplifier Output Power 2 x 150 Watt @ 8 Ohms and 2 x 250 Watt @ 4 Ohms (Power supply: Volt 10 Amps)  Contact details:- E-Mail: Any Query Please call on: Mob. No.