Pm stereo amplifier

Stereo Amplifier Module based on TDA7379 Compact PCB based on TDA7379 Supply Voltage operating maximum DC 22 V  HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD ALSO AVALABLE 6 Channels of TDA7379 (3 IC in single board for 5.1 setup). Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

  Hi-Fi Stereo audio amplifier module: 2X  TDA2030         Features: 18 Watts+ 18 Watts RMS maximum. Wide-range supply voltage, up to dual 18 Volts DC  100K OHM INPUT IMPEDANCE. X 46 Gain. Short-circuit protection to ground Thermal shutdown Heatsink needed. Description: The TDA2030 is a monolithic integrated circuit in  the Pentawatt ® package, intended for use as a  low frequency class-AB amplifier. Typically it  provides 14 W output power (d = 0.5%) at 14 V/4 Ω. At ±14 V or 28 V, the guaranteed output  power is 12 W on a 4 Ω load and 8 W on an 8 Ω  The TDA2030 provides high output current and  has very low harmonic and crossover distortion. Furthermore, the device incorporates an original  (and patented) short-circuit protection system  comprising an arrangement for automatically  limiting the dissipated power so as to keep the  operating point of the output transistors within  their safe operating range. A conventional thermal  shutdown system is also included. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.       

Cambridge Audio, Topaz AM10 Amplifier, 31/2 Years old, very good working condition, With Remote Control

HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

Nakamichi Stereo amplifier & Cd player with remote for sale in excellent condition Only serious Buyers call Timepassers Kindly Excuse. Description The IA-2 with Nakamichi's exclusive Harmonic Time Alignment circuitry delivers an extraordinary 55 watts per channel into 8 ohms. It is constructed using nothing but the finest components, selected for use only after extensive testing and evaluation. As with the IA-1, the preamplifier section is fully discrete, and the power amplifier section is capable of a hefty 16 amperes of peak current, which makes robust, distortion free listening possible with virtually any loudspeaker. Specifications Power output: 55 watts per channel into 8 ohms (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MC), 82dB (MM), 105dB (line) Weight: 12.5kg

Akai stereo amplifier, cassette tape deck. selling matching Akai components: Amp, tape deck, and including (graphic equalizer are optional) Deck: CS-M01A, for rs. Amp: AM U-01, for rs, This is an excellent Integrated Amplifier all in working condition, Both amp and deck are in perfect working order... Very good cosmetic conditions... amp would be fine to drive efficient tower speakers. these are awesome unit. (graphic equalizer are optional) also available akai Equalizer: EA-A22 for rs.. Audition welcome SERIOUS BUYER ONLY simply call for details on cell:

Harman kardon hk-6200 very powerful stereo amplifier.out put is only 50+50w rms but very easily drive up to 200w amplifiers.!.powerful bass and treble.good cosmetic condition.made in japan.one of the best product from Harman international. Specifications: Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 0.5Hz to 150kHz Total harmonic distortion: 0.09% Damping factor: 60 Input sensitivity: 2.2mV (MM), 135mV (line) Signal to noise ratio: 80dB (MM), 98dB (line) Speaker load impedance: 4Ω (minimum) Dimensions: 443 x 103 x 361mm Weight: 7.5kg price fixed

100 Watt Per channel Stereo Amplifier, bare PCB (2x TDA7294 bridged) Reference design, No frills. Highly stable due to good layout. 2 nos of TDA7294 in noninverting configuration using dual 36 to 40 Volts (center tapped) PCB Dimensions:  143mm x 50mm Very high quality Pcb. Single sided Glass epoxy; Green masked, tinned pads with legend printing. Full schematics; Bill of Materials, wiring diagram will be provided. IC is available at extra cost. Suitable power supply rectifier board also available for easy assembling. Very versatile Pcb, TDA7293 can also be used. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

Onkyo Integra Stereo Amplifier 100 Watts Per Channel 18 kg weight Hi END AMPLIFIER Sanjay /// Salem

YAMAHA A-500 NATURAL SOUND STEREO AMPLIFIER - USED GOOD Power output: 70 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 76dB (MC), 92dB (MM), 100dB (line) Channel separation: 55dB (MM), 60dB (line) Output: 150mV (line) Dimensions: 435 x 112 x 327mm Weight: 7.3kg USED UNIT IN VERY GOOD WORKING CONDITION

Akai integrated stereo amplifier in prefect working condition, AM U01. great sound quality. 100% working order. Audition welcome. truly interested buyers can call on cell.

It's a Arcam alpha series 40 wpc in to 4 channel stereo amplifier in a flawless condition wanna sell as I ve already upgraded my system. It's made in england

Denon PMA-860 stereo amplifier to sell, 80w RMS/ ch. good condition. no bargain,

Panasonic 3.in 1 stereo amplifier/Radio/tape with ok condition

Yamaha 5.1 stereo amplifier, gently used, good working condition,