Sensor module

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT 4 Types of sensor Thermal, Magnetic, Flame & Light Sensor Module All modules have Four Pin 2 For Power & 2 For Output Digital & Analog. Also Have Output Led Indicator. Package Content Total 4 items 1 x Flame sensor module 1x Thermal Sensor Module 1x Digital Light Sensor Module 1x Magnetic Field Sensor Module Description: Thermal Sensor Module: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

Tilt Sensor Module Tilt Switch Angle sensor Module Ball Switch Dumping Sensor Application: Tilt variety of products, dumping trigger an alarm, dumping off the sensor, tilt sensor. Tire Pressure Monitoring System (TPMS), bicycle lights, digital photo frame rotation, screen rotation, flip video camera, anti-theft system Module Features: using the highly sensitive switch SW-520D as the angle sensor. Comparator output signal clean waveform is good, driving ability, than 15mA. Working voltage 3.3V-5V Output format: Digital switching output (0 and 1) With bolt holes for easy installation Small plate PCB size: 3.2cm x 1.4cm Using a wide voltage LM393 comparator Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Infrared obstacle avoidance sensor module Tracing Module electrcal sensor for Arduino Robot project Module description: The sensor module on environment light adapted capacity strong, its has pair infra-red launches and receives tube, launches tube launches out must frequency of infra-red, dang detection direction encountered obstacles real (reflection surface) Shi, infra-red reflection back was receives tube receives, after compared device circuit processing zhihou, green indicates Lantern bright up, while signal output interface output digital signal (a low level signal), can through potentiometer knob regulation detection distance, effective distance range 2~30cm, work voltage for 3.3V-5V. The sensor’s detection range can be adjusted by potentiometer, with little interference, easy to assemble, easy to use features, can be widely used

4Pin Digital Thermal Thermistor Temperature Sensor Module For Arduino Features: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are  Indian speed post   Feedback: ·         In case you find any problem

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

BRAND NEW High quality Rain drops Detection sensor module/ weather/ Humidity sensor for arduino        Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free Dupont cables Shipping through BlueDart/Aramex/FedEx                                   For more information on our products and shipping please email us at Please note that All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items. These are imported electronic items and can easily get damaged by mishandling or wrong connections. Please Buy only if you can understand the product and its working well. We do not give any documents or connection diagram along with the product. All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

BRAND NEW High quality  Rain drops Detection  sensor module/ weather/  Humidity sensor  for arduino         Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free  Dupont cables

Uses:Humidity detection, humidity sensors, humidity detection the working voltage 3.3V-5V the output form: DO digital switching outputs (0 and 1) and AO analog voltage output the comparator output signal is clean, good waveform, driving ability, more than 15mA a small PCB board size: 3.2cm x 1.4cm Module Features:  1, using high-quality HR202 humidity sensor;  2, the comparator output signal is clean, good waveform, driving ability, more than 15mA;  3, adjust the temperature distribution position detection threshold;  4, the working voltage 3.3V-5V;  5, the output form: DO digital switching outputs (0 and 1) and AO analog voltage output;  6, a fixed bolt holes for easy installation;  7, a small PCB board size: 3.2cm x 1.4cm;  8, using a wide voltage LM393 comparator.  Product wiring instructions:  1, VCC positive power supply 3.3-5V  2, GND power supply is negative  3, DO TTL switching signal output  4, AO small plates analog output (voltage signal)  Module for use  1, the humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity;  2, by adjusting the potentiometer, for detecting the humidity can change the threshold (i.e. the humidity control), such as the need to control the ambient humidity of 60%,then the corresponding module is transferred to the green light and humidity environment, DO high power output when flat, humidity values below this setting, high output, the green light does not shine;  3, DO output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting the humidity changes

Soil moisture humidity detector sensor module soil hygrometer Soil moisture sensor for your plants   Product Description:   ·            100% Brand new and high quality ·            This is a simple water sensor can be used to detect soil moisture when the soil moisture deficit module outputs a high level, and vice versa output low. Use this sensor produced an automatic plant waterer device, so that the plants

Description Pulse sensor Arduino is used to test the heart rate sensor, students, artists, athletes, creator, game developer, or mobile terminal can develop interactive work related to heart rate. Sensors can be put on the finger or earlobe, through interconnected line can be connected to the Arduino. Heat beat indication by LED Instant output digital signal for directly connecting to microcontroller Compact Size Working Voltage +5V DC It also has an open source app, can real time your heart rate graph display. Essence is a integrated optical amplifying circuit and noise eliminating circuit heart rate sensor. Technical parameters: Operating Voltage- +5V DC regulated Operating Current- 100 mA Output Data Level- 5V TTL level Heart Beat detection- Indicated by LED and Output High Pulse Package Includes: 1 Piece new  XD-58C Pulsesensor Heart-rate Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description The Raindrop Detection Sensor module is an easy-to-use and low cost drop recognition sensor. The sensor works through a series of exposed parallel traces on board which produces electrical variations when drops or water volume changes. By using microcontrollers or ADC ICs (Arduino and PIC) it's fairly easy to convert the analog output from the sensor to digital values. Water Sensor water level sensor is an easy-to-use, cost-effective high level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

ACSA hall current sensor module for arduino ARM, AVR, PIC and other MCU With on board power indicator   Product Description:   The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.  ·         The current sensor chips: ACS712ELC-30B; ·         Pin 5V power supply, on-board power indicator; ·         The module can measure plus or minus 30 amps, corresponding to the analog output of 185 mV / A; ·         If there is no the detection current through, the output voltage is VCC / 2 ·         PCB board size: 31 (mm) x13 (mm); ·         Note: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!   Package Include:   ·         1 x     ACSA current sensor   Shipping Details:   Our preferred shipping partners are Indian speed post   Feedback: ·         In case you find any problem

DESCRIPTION DHT11 Temperature Relative Humidity Sensor Module For Arduino Feature: Can detect surrounding environment of the humidity and temperature DHT11 sensor adopts Humidity measurement range: % Humidity measurement error: +/- 5% Temperature measurement range: 0 C ~ 50 C Temperature measurement error: +/- 2 C Working voltage 3.3V ~ 5V Output mode: digital output Has fixed bolt hole and easy installation PCB size: 3.1 x 1.4cm Package included: 1 x DHT11 Temperature Relative Humidity Sensor Module We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

MUST HAVE FOR STUDENTS  AND HOBBYIST *** Package include 1 X  Magnetic Sensor Module Module Size 1.75 X 1.4 inch Features: Sensor Module Apply to switchboard, duplicator, washing machine, refrigerator, camera, disinfector, electronic scale, juice level gauge, gas meter and water meter,Home Security System etc Specifications: With four fixed bolt hole for easy installation Operating voltage: 3.3 V-9 V Output Type: Digital switching output (0 and 1) Size: 1.75 x 1.4 inch Package weight:14 g Color:As shown

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is V (5 V / ), and the input voltage of this module should be more than V x V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC V-25 V Voltage analog resolution: V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x 5 = 16.5 V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 0.00489 V (5 V / 1023), and the input voltage of this module should be more than 0.00489 V x 5 = 0.02445 V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC0.02445 V-25 V Voltage analog resolution: 0.00489 V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description IR Infrared Obstacle, Proximity, Line following sensor module for Arduino, PIC by MatLogix Applications - Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

DS18B20 Module DS18B20 Temperature Measurement Sensor Module for Arduino UNO DUE MEGA Description: 1 On board DS18B20 chip, left 3P round hole seat 2 Built-in pull-up resistor 3 On-board power indicator 4 Board size: 21 (mm) x10 (mm) Package Included: 1 * DS18B20 Module Other Product You Might be Interested

MPXD Pressure Sensor Module 0 to 700kPa on chip signal conditioned  temperature compensated pressure sensor 0 to PSI 0.2V to 4.7V Output Sensitivity 6.4mV.kPa Supply Voltage 5VDC Mini Module Output and supply input via Berg connector Application Robotics Pump Motor Level indicator Medical equipment Barometer Altimeter

MPXMA Pressure Sensor Module 0 to 200kPa 0 to 200kPa on chip temperature compensated pressure sensor 0 to 29 PSI 40mV full scale output Sensitivity 0.2mV.kPa Supply Voltage VDC Mini Module Output and supply

MPXA Pressure Sensor Module 0 to 200kPa on chip temperature compensated pressure sensor 0 to 29 PSI 40mV full scale output Sensitivity 0.2mV.kPa Supply Voltage VDC Mini Module Output and supply

MPXVGP Pressure Sensor Module 0 to 10kPa on chip temperature compensated and calibrated  pressure sensor 0 to 1.45 PSI 25mV full scale span output Sensitivity 2.5mV/kPa Supply Voltage VDC Current load 7mA Mini Module Output and supply input via pads SMD package Application Robotics Controller Pressure switch Pump Motor Level indicator Air movement control Medical equipment Barometer Altimeter

MPXMGS Pressure Sensor Module 0 to 10kPa on chip temperature compensated and calibrated  pressure sensor 0 to 1.45 PSI 25mV full scale span output Sensitivity 2.5mV/kPa Supply Voltage VDC Current load 7mA Mini Module Output and supply input via pads SMD package Application Robotics Controller Pressure switch Pump Motor Level indicator Medical equipment Barometer Altimeter

0 to 50kPa MPXGP Pressure Sensor Module 0 to 50kPa on chip temperature compensated and calibrated pressure sensor 0 to 7.5 PSI 40mV full scale span output Sensitivity 0.8mV/kPa Supply Voltage VDC Current load 7mA Mini Module Output and supply input via berg connector Application Robotics Controller Pressure switch Pump Motor control Level indicator Medical equipment Barometer

LPG Gas Sensor Module MQ6 This is a simple to use LPG Gas Sensor Module which can sense the presence of combustible gases mainly LPG, isobutane, and propane

Description These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150° C, and are more stable with both temperature and supply voltage changes.  The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.  The four basic devices (, and ) are identical except for magnetic switch points. Each device includes a voltage regulator for operation with supply voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperature compensation circuitry, small-signal amplifier, Schmitt trigger, and an open-collector output to sink up to 25 mA.  With suitable output pull up, they can be used with bipolar or CMOS logic circuits.  The A- and A- are improved replacements for the UGN/UGS-; the A- is the improved replacement for the UGN/UGS-. True solid state Operates with stationary input (zero speed) No moving parts Logic compatible input and output Highly repeatable operation Immune to dirt In the Hall-effect sensor on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection. Technical parameters: 4.5 V to 24 V Operation Needs Only An Unregulated Supply Open-Collector 25 mA Output Compatible with Digital Logic High speed operation - over 100 kHz possible Broad temperature range (-40 to +150°C) PIN-OUT DIAGRAM: Package Includes: 1 Piece new  HALL Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150° C, and are more stable with both temperature and supply voltage changes.  The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.  The four basic devices (3141, 3142, 3143, and 3144) are identical except for magnetic switch points. Each device includes a voltage regulator for operation with supply voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperature compensation circuitry, small-signal amplifier, Schmitt trigger, and an open-collector output to sink up to 25 mA.  With suitable output pull up, they can be used with bipolar or CMOS logic circuits.  The A3141- and A3142- are improved replacements for the UGN/UGS3140-; the A3144- is the improved replacement for the UGN/UGS3120-. True solid state Operates with stationary input (zero speed) No moving parts Logic compatible input and output Highly repeatable operation Immune to dirt In the Hall-effect sensor on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection. Technical parameters: 4.5 V to 24 V Operation Needs Only An Unregulated Supply Open-Collector 25 mA Output Compatible with Digital Logic High speed operation - over 100 kHz possible Broad temperature range (-40 to +150°C) PIN-OUT DIAGRAM: Package Includes: 1 Piece new  HALL Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

MQ7 CO carbon monoxide gas sensor module for arduino raspi AVR PIC other MCU High sensitivity carbon monoxide CO sensor Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description: Sensitive material of MQ-7 gas sensor is SnO2, which with lower conductivity