Service servo motor

DESCRIPTION MatLogix present the Servo Motor Kit which is the best way of learning servo motor contolling. Once you've received your kit you can start to play with little or no electronics and programming experience. Components: 1x Arduino UNO R3 1x 16*2 LCD 10x Female to Female Connector 10x Male to Male Connector 10x Female to Male Connector 1x Fatuba S Servo Motor 1x Breadboard 20x Resister 2x NPN Transister 2x PNP Transister 1x L293D 1x Toy Motor 1x POT 1x RGB LED 5x Yellow LED 5x Red LED 5x Green LED We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description SG90 9G micro servo motor TowerPro RC Robot Helicopter Airplane controls Specification Connector wire length: 250mm Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque: 1.2kg / 42.3oz (4.8V);1.6 kg / 56.4oz (6.0V) Temperature Range: -30 to +60 Degree C Torsional moment: 1.5kg/cm Dead Band Width: 7usec Operating Voltage:4.8-6 Volts Net weight: 9g Package Includes 1 x Tower Pro Servo Motor   Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

This is a micro size servo motor metal gears. Metal gears provide strength/torque at the cost of higher weight and quicker wear-out. This servo motor gives stall torque of 1.8 Kg.cm at 4.8V and 2.2 Kg.cm at 6V. This is a good contender for small RC toys and robots. Servo motors are a type of brush DC motors with some extra features that make them ideal for use

Description Package Includes: 1 Piece new  Tower Pro SG90 Mini 9g Gear Micro Digital Servo Motor for microcontrolle rs It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  Tower Pro SG90 Mini 9g Gear Micro Digital Servo Motor for microcontrolle rs It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

PCA Channel 12-bit PWM Servo motor Driver I2C Module Arduino PIC Robot WC You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now? Using only two pins, control 16 free-running PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs • It's an i2c-controlled PWM driver with a built

PCA9685 16 Channel 12-bit PWM Servo motor Driver I2C Module Arduino PIC Robot WC You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now? Using only two pins, control 16 free-running PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs • It's an i2c-controlled PWM driver with a built

Servo SG90 Mini 9G Dimension: 22mm x 11.5mm x 22.5mm Net Weight: 9 grams Operating speed: 0.12second/ 60degree (4.8V no load) Stall Torque (4.8V): 17.5oz /in (1kg/cm) Temperature range: -30 to +60 Dead band width: 7usec Operating voltage: 3.0V~7.2V Fit for ALL kinds of R/C Toys Coreless motor All nylon gear Dual ball bearing Connector wire length 150mm

NOTE: DIY_IOT_SHOP is on vacation from 8-11 May, orders made on these days will be shipped only after 11-May. Features:   9 Gram Mini Micro Servo Light-Weight, High-Quality, and Lightning-Fast Designed to work with almost all Radio Control Systems Excellent performance brings you to another horizon of flight Perfect for R/C Helicopter, Plane, Car & Boat or trucks use Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, Airtronics & Aashai etc. Each servo comes with servo horns and fittings 245mm connector wire. Large stall torque of 1.6 Kg. Small size and Less Noise Specifications:   color: blue  Operating Speed (4.8V no load): 0.12sec/60 degrees  Stall torque: 1.2kg / 42.3oz(4.8V);1.6 kg / 56.4oz (6.0V)  operating voltage: V Temperature Range: - degrees C Dead band width: 7us Item size: cm Connector wire length: 24.5cm Package weight: 53g Dimensions: 22.6 x 21.8 x 11.4mm Weight: 9g Package includes:   1) 1 SG90 Servo  2) Servo horns and fittings set

SG90 9-Gram Micro 9g Servo For RC Airplane Car Boat Product information SG90 Micro 9g Servo For RC Airplanes Cars and Boats Shipped from Illinois USA. Specifications: Weight: 9g Size: 22mm x 11.5mm x 27 mm Operating Speed (4.8V no load): 0.12sec/60 degrees Torque (4.8V): 17.5oz/in (1.2 kg/cm) Temperature Range: -30 to +60 Degree Dead Band Width: 7usec Operating Voltage: Volts All Nylon Gear Connector Wire Length 150MM 100% Genuine SHIPPING ·         Product will be shipped on same day if the order is before 1pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 1pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

MG958 is best choice if you need higher torque than 15KG. Excellent performace for RC-cars from 10 to 6-th scale  truggy and monster and 30cc 60cc airplane. Specification: Weight: 65g Dimensions: 40.2 x 20.1 x 36.8mm Operating Voltage: 4.8v-6.6v Stall Torque (4.8v): 18.0kg.cm Stall Torque (6.6v): 20.0kg.cm Servo case: Alloy case

Being the leading company, we are affianced in providing a wide gamut of DSX-HCF Series Hi Speed Closed Loop Servo Tensioner that is known for its high efficiency and excellent quality. The given servo tensioner features a large screen HD LCD panel for multiple data settings and display. Clear multiple data display, real-time communication and tension range preset function are qualities of offered loop servo tensioner. This DSX-HCF Series Hi Speed Closed Loop Servo Tensioner can be purchased from us at reasonable rates within the promised time period. More Details The DSX - HCF series features high speed closed loop servo Tensioners with a maximum wire - feeding speed of 15 meters per second. Its high speed/high torque DC servo motor and built - in Adaptive Speed Control software provides fast response to rapid changes in coil winding speed and a wider Tension range for Hi-speed precision winding.It features a large screen HD LCD panel for multiple data settings and display. Standard configurations for this series includes a built-in tension measurement system, two-stage tensions setting and wire breakage detection. The series operates with DC24V. Advantages Precise, stable and consistent tension for hi -speed precision winding Two stage tension setting Wide tension range Comes with real-time tension measurement and display Requirements Power supply: DC 24V Compressed air. 5kg/cm2

The DSX-TK series features high speed closed loop servo control, with a maximum wire-feeding speed of 15 meters per second. Its high speed /high torque DC servo motor and built - in Adaptive Speed Control software provides fast response to rapid changes in coil winding speed and a wider Tension range for Hi-speed precision winding. The series operates with a DC24V power supply and comes with two-stage tensions setting and wire breakage detection.

Specifications: Dimensions (L x W x H) = 0.86 x 0.45 x 1.0 inch (22.0 x 11.5 x 27 mm) Weight = 0.32 ounces (9 grams) Weight with wire and connecter = 0.37 ounce (10.6 grams) Stall Torque at 4.8 volts = 16.7 oz/in (1.2 kg/cm) Operating Voltage = 4.0 to 7.2 volts Operating Speed at 4.8 volts (no load) = 0.12 sec/ 60 degrees Connector Wire Length = 9.75 inches (248 mm) Universal "S" type connector fits most receivers

Sensor Shield V4 Digital Analog Module For Arduino Duemilanove / UNO / MEGA 100% brand new and high quality. Quantity:1pc 　 Size: 70mm x 56mm/2.73"x 2.18''(inch) (approx) 　 Buckled Communication Port: Selectable between I2C and UARt. 　 Analog IO Port: 2.54 grid male pin header connections. 　 Digital IO port: 13 ports prepared to digital modules or servos. 　 Buckled Analog Port: Handy, solid connection to 6 Analog inputs with VCC/GND. 　 Input Voltage (limits): 6-20VDC. 　 Input Voltage (recommended): 7-12VDC. 　 Operating Voltage: 5VDC Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking. ---1 PC package