Servo cable

TowerPro Airplane 9g SG-90 Mini Servo TowerPro SG90 is a high quality,low-cost servo for all your mechatronic needs. It comes with a 3-pin power,control cable and motunting hardware. Features:  3 pole ferrite, all nylon gear Top ball bearing Operating Voltage: 4.8V~6.0V Operating speed: 0.12sec/60 degree Output torque: 1.6kg/cm  4.8V Dimension:  21.5 x 11.8 x 22.7mm Weight: 9g

10cm Male to Male Servo Lead (JR) 26AWG - 5 Piece This cable is usually used to connect Flight Control Board to receivers

before placing the order call me Features: - Supported MegaPirateNG and MultiWii firmware - Up to 8-axis motor output - 8 input channels for standard receiver - 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry - 2 servos output for PITCH and ROLL gimbal system - A servos output to trigger a camera button - 8 Analog port for Airspeed Sensor/Current & Voltage Sensor/LED controller - User-defined pads D & PG1~PG5 - A I2C port for extend sensor or device - Separate 3.3V and 5V LDO voltage regulator - Onboard 16Mbit Dataflash chip for automatic datalogging - ATMega AU Microcontroller - MPU axis gyro/accel with Motion Processing Unit - HMCL 3-axis digital magnetometer - MSBA01 highprecision altimeter - FT232RQ USB-UART chip and Micro USB receptacle - PCADP1 logic level converter for I2C Match the standard of RoHS Flight modes for Multiwii One of the following basic mode - Acro - Level - Alt Hold - Head Lock - Optional mode - HeadFree (CareFree) - GPS Hold (Need GPS receiver or Extend Board) - GPS Back to home position (Need GPS receiver or Extend Board) Flight mode for MegaPirate - Acro - Alt Hold - Simple - Loiter (uses GPS) - Guided (uses GPS) - Position (uses GPS) - Circle (uses GPS) - RTL (uses GPS) - Auto(uses GPS) - Follow Me(uses GPS) Input power selection One of the following way - Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed. - Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed. When using Extend Board, AIO PRO must be powered from the extend power port. General Dimension: 50mmX50mm Height: 11.6mm Weight: 14.2g Fixing hole spacing: 45mm Hole diameter: 3mm Package content ALL IN ONE PRO Flight Controller x 1 3Pin to 1Pinx3 cable 100mm x 3 3Pin to 3Pin cable 100mm x 1 Molex 1.25mm 4Pin cable 100mm x1 Molex 1.25mm 6Pin cable 100mm x1 Molex 1.25mm 8Pin cable 100mm x2

BRAND NEW, READY STOCK TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) AT AN UNBELIEVABLE PRICE! OFFER VALID TILL STOCK LASTS! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH LONG SIGNAL RANGE (APPROX. 1 KM RADIUS ON LINE OF SIGHT WITH FULL BATTERY) BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

BRAND NEW TURNIGY TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)

FAMOUS BRAND "TURNIGY" TRANSMITTER AND RECEIVER 2.4 GHZ 5 CHANNEL WITH GOOD SIGNAL RANGE (approx. 0.7 to 1 km on line of sight with full battery)! BUY WITH CONFIDENCE! TECHNICAL SPECIFICATION/FEATURES: 5 Channel radio control  (it means dedicated five input from transmitter to receiver at same time. For eg. up,down, right, left, roll, forward, backward, click, any servo movement, etc) 2.4 Ghz operation frequency. Dual rates. Analog trim tabs to fine tune the command. All switches can reversed without PC cable with switches (6 switches at bottom)