Color sensor module

Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS3200 has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS3200 color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  Specifications Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency Power Down Feature Communicates Directly to Microcontroller S0~S1: Output frequency scaling selection inputs  S2~S3: Photodiode type selection inputs OUT Pin: Output frequency OE Pin: Output frequency enable pin (active low), can be impending when using Support LED lamp light supplement control Size: 28.4x28.4mm Recognition color principle of sensor To TCSD, when choose a color filter, it can allow only one particular color to get through and prevent other color. For example, when choose the red filter, Only red incident light can get through, blue and green will be prevented. So we can get the red light intensity. Similarly,when choose other filters we can get blue or green light. TCSD has four photodiode types. Red, blue, green and clear, reducing the amplitude of the incident light uniformity greatly, so that to increase the accuracy and simplify the optical. When the light project to the TCSD we can choose the different type of photodiode by different combinations of S2 and S3. Look at the form as follows. The TCS Color Sensor TCSD can output the frequency of different square wave (occupies emptiescompared 50%),different color and light intensity correspond with different frequency of square wave. There is a relationship between the output and light intensity. The range of the typical output frequency is 2HZ~500KHZ. We can get different scaling factor by different combinations of S0 and S1. Look at the form as follows. The TCS Color Sensor Connection Diagram The TCS Color Sensor If you want to turn on the LEDs on the board, you could connect the led pin to 5v or a digital pin to drive them.  

LOWEST PRICE IN   e b a y 10 TIMES MORE RELIABLE THAN OTHER CHINESE MODULE BEST FOR YOUR ROBOT / INDUSTRIAL  PURPOSE  /HOME & AUTOMATION 1 MONTHS REPLACEMENT WARRENTY IN CASE OF ANY PROBLEM DUE TO MANUFACTURING DIFFECT 4 Types of sensor Thermal, Magnetic, Flame & Light Sensor Module All modules have Four Pin 2 For Power & 2 For Output Digital & Analog. Also Have Output Led Indicator. Package Content Total 4 items 1 x Flame sensor module 1x Thermal Sensor Module 1x Digital Light Sensor Module 1x Magnetic Field Sensor Module Description: Thermal Sensor Module: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

GY-31 TCS230 TCS Color Sensor Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few.  • The TCS has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color.  • Single-Supply Operation (2.7V to 5.5V)  • High-Resolution Conversion of Light Intensity to Frequency  • Programmable Color and Full-Scale Output Frequency  • Power Down Feature  • Communicates Directly to Microcontroller  • S0~S1: Output frequency scaling selection inputs  • S2~S3: Photodiode type selection inputs  • OUT Pin: Output frequency  • OE Pin: Output frequency enable pin (active low), can be impending when using  • Support LED lamp light supplement control  • Size: mm Package Info 1 X Pc TCS230 TCS Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

MUST HAVE FOR STUDENTS  AND HOBBYIST *** Package include 1 X  Magnetic Sensor Module Module Size 1.75 X 1.4 inch Features: Sensor Module Apply to switchboard, duplicator, washing machine, refrigerator, camera, disinfector, electronic scale, juice level gauge, gas meter and water meter,Home Security System etc Specifications: With four fixed bolt hole for easy installation Operating voltage: 3.3 V-9 V Output Type: Digital switching output (0 and 1) Size: 1.75 x 1.4 inch Package weight:14 g Color:As shown

Tilt Sensor Module Tilt Switch Angle sensor Module Ball Switch Dumping Sensor Application: Tilt variety of products, dumping trigger an alarm, dumping off the sensor, tilt sensor. Tire Pressure Monitoring System (TPMS), bicycle lights, digital photo frame rotation, screen rotation, flip video camera, anti-theft system Module Features: using the highly sensitive switch SW-520D as the angle sensor. Comparator output signal clean waveform is good, driving ability, than 15mA. Working voltage 3.3V-5V Output format: Digital switching output (0 and 1) With bolt holes for easy installation Small plate PCB size: 3.2cm x 1.4cm Using a wide voltage LM393 comparator Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Infrared obstacle avoidance sensor module Tracing Module electrcal sensor for Arduino Robot project Module description: The sensor module on environment light adapted capacity strong, its has pair infra-red launches and receives tube, launches tube launches out must frequency of infra-red, dang detection direction encountered obstacles real (reflection surface) Shi, infra-red reflection back was receives tube receives, after compared device circuit processing zhihou, green indicates Lantern bright up, while signal output interface output digital signal (a low level signal), can through potentiometer knob regulation detection distance, effective distance range 2~30cm, work voltage for 3.3V-5V. The sensor’s detection range can be adjusted by potentiometer, with little interference, easy to assemble, easy to use features, can be widely used

Description Sensor Module Apply to switchboard, duplicator, washing machine, refrigerator, camera, disinfector, electronic scale, juice level gauge, gas meter and water meter, etc Specification: With fixed bolt hole for easy installation Working distance:- 1.5 M Operating voltage: - 3.3 V-5 V Output Type: - Digital switching output (0 and 1) Size: -3.2 x 1.9 x 0.7 cm Net weight: - 4Gm Color: -As shown

4Pin Digital Thermal Thermistor Temperature Sensor Module For Arduino Features: 1. Using the NTC thermistor sensor, good sensitivity 2. The comparator output signal clean waveform is good, driving ability, than 15mA. 3. Adjust the temperature distribution bit detection threshold 4. Working voltage 3.3V-5V 5. The output format: Digital switching output (0 and 1) 6. With bolt holes for easy installation 7. A small board PCB size: 3.2cm x 1.4cm 8. Using a wide voltage LM393 comparator Module for use: 1. The thermal resistance of the module is very sensitive to the ambient temperature, generally used to detect the ambient temperature; 2. Through the adjustment of the potentiometer, can change the temperature detection threshold (ie, temperature control value), if necessary to control the ambient temperature is 50 degrees, the module

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are  Indian speed post   Feedback: ·         In case you find any problem

DHT11 relative humidity and temperature sensor module Temperature and humidity sensor   Product Description DHT11:   ·            The module can detect humidity and temperature of surrounding environment ·            High reliability and excellent long-term stability ·            digital output ·            fixed bolt hole for easy installation   Specification Temperature sensor:   ·            DHT series numeric humidity sensor. ·            Power supply: 5V DC ·            Output signal: digital signal via single-bus ·            Humidity measuring range: % RH(0-50 degree centigrade temperature compensation). ·            Temperature measuring range: 0 – 50 C. ·            Humidity measurement accuracy: ±5.0%RH ·            Temperature measurement accuracy: ±2.0 C. ·            Response time: ·            Low power consumption. ·            Size: 28mm x 13mm x 8mm.   Application DHT 11 temperature sensor:   HVAC, Testing and inspection equipment, Automotive, Data logger, Consumer goods, Automatic control, Weather station, Home appliances, Humidity regulator, Medical, Dehumidifier, etc.     Package Include:   ·            1 x     DHT11 temperature and humidity sensor   Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Uses:Humidity detection, humidity sensors, humidity detection the working voltage 3.3V-5V the output form: DO digital switching outputs (0 and 1) and AO analog voltage output the comparator output signal is clean, good waveform, driving ability, more than 15mA a small PCB board size: 3.2cm x 1.4cm Module Features:  1, using high-quality HR202 humidity sensor;  2, the comparator output signal is clean, good waveform, driving ability, more than 15mA;  3, adjust the temperature distribution position detection threshold;  4, the working voltage 3.3V-5V;  5, the output form: DO digital switching outputs (0 and 1) and AO analog voltage output;  6, a fixed bolt holes for easy installation;  7, a small PCB board size: 3.2cm x 1.4cm;  8, using a wide voltage LM393 comparator.  Product wiring instructions:  1, VCC positive power supply 3.3-5V  2, GND power supply is negative  3, DO TTL switching signal output  4, AO small plates analog output (voltage signal)  Module for use  1, the humidity sensor module is sensitive to environmental humidity, generally used to detect ambient humidity;  2, by adjusting the potentiometer, for detecting the humidity can change the threshold (i.e. the humidity control), such as the need to control the ambient humidity of 60%,then the corresponding module is transferred to the green light and humidity environment, DO high power output when flat, humidity values below this setting, high output, the green light does not shine;  3, DO output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting the humidity changes

BRAND NEW High quality Rain drops Detection sensor module/ weather/ Humidity sensor for arduino        Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free Dupont cables Shipping through BlueDart/Aramex/FedEx                                   For more information on our products and shipping please email us at Please note that All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items. These are imported electronic items and can easily get damaged by mishandling or wrong connections. Please Buy only if you can understand the product and its working well. We do not give any documents or connection diagram along with the product. All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

BRAND NEW High quality  Rain drops Detection  sensor module/ weather/  Humidity sensor  for arduino         Rain sensor, can be used for all kinds of weather monitoring, and translated into output signals and AO. Features： The sensor USES the high quality FR - 04 double material with large area of CM, nickel plated surface, high electrical conductivity and life, has more superior performance. With potentiometer sensitivity adjustment Working voltage of 3.3 V to 5 V Output format: digital switch output (0 and 1) and analog (AO) voltage output; Has fixed bolt holes for easy installation Small board PCB size: Approx. 3.2 cm x 1.5 cm The LM393, use of wide voltage comparator Connection mode: VCC: positive (3-5 v) GND: 0V DO: TTL switch signal output AO: analog signal output Package contents: 1 x  Raindrops Detection Sensor Module Free  Dupont cables