Voltage display module

OLED 0.96" yellow blue Display Module For Arduino I2C Display 128X64 OLED What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology offers the following advantages for flat-panel displays? 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Capable of wide viewing angles?~180?? 6. Low operating voltage and power consumption 7. Quick response (~ ? second level) 8. Wide range of operating temperatures (-40c to 85c) A Comparison of OLED and TFT-LCD Display Technologies How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components. Interface: VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Data Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size:  27.3MM *27.8MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306       Package Included: 1PCS * New  yellow-blue 0.96" I2C IIC SPI Serial 128X64 OLED LCD LED Display Module for Arduino Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Blue 0.96" inch SPI 128 x 64 OLED display module with CS pin SSD   Fully working Software Code included with English Font.     Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with arduino, AVR, PIC, 51 series, MSP,STM,CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:    128 x 64 Module Size:27.0mm x 27.0mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include: ·       1 x   0.96” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Blue 1.3" inch SPI 128 x 64 OLED display module with CS pin   Fully working Software Code included with English Font   Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with Arduino, AVR, PIC, 51 series, MSP, STM, CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:128 x 64 Module Size:35.5mm x 33.5mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include:   ·       1 x   1.3” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Yellow + Blue 0.96" SPI Serial 128x64 OLED LCD Display Module 3-5V SSD   Fully functioning Software Code(AVR) included with English Font.        Product Summary: OLED SPI Operating Voltage 3-5V Input Voltage (recommended) 5V Input Voltage (limits) 3-5V No. of Pins 6 Power Pins 2(VCC,GND) LED colour Yellow and Blue |||||| & |||||| Resolution 128 x 64 View angle >160 Power consumption 0.08w at full screen lit Working temperature -30C ~ 70C Control Chip SSD Module size(Approx.) mmx27.1mmx4.1mm Module weight 0.06kg (lb.)

White 0.96" SPI Serial 128x64 OLED LCD Display Module 3-5V SSD   Fully functioning Software Code(AVR) included with English Font.        Product Summary: OLED SPI Operating Voltage 3-5V Input Voltage (recommended) 5V Input Voltage (limits) 3-5V No. of Pins 6 Power Pins 2(VCC,GND) LED colour White Resolution 128 x 64 View angle >160 Power consumption 0.08w at full screen lit Working temperature -30C ~ 70C Control Chip SSD Module size(Approx.) mmx27.1mmx4.1mm Module weight 0.06kg (lb.)

See our ratings Add this shop to my favorites The Active Phase AC Output Voltage Transformer Module Voltage Sensor Module ₹ Availability:

HP 347884-001 VRM Voltage Regulator Module HP 347884-001 VRM Voltage Regulator Module 9840269314

IBM 24P6893 - Voltage Regulator Module (VRM) 073-20795-03u TESTED FAST SHIP IBM 24P6893 - Voltage Regulator Module (VRM) 073-20795-03u TESTED FAST SHIP 9840269314

IBM 24R2750 Voltage Regulator Module for xSeries 346 IBM 24R2750 Voltage Regulator Module for xSeries 346 asiaserversolutions@hotmail.com 9840269314

IBM 53P5621 - 7029 VOLTAGE REGULATOR MODULE IBM 53P5621 - 7029 VOLTAGE REGULATOR MODULE asiaserversolutions@hotmail.com 9840269314

IBM 53P5621 - 7029 VOLTAGE REGULATOR MODULE IBM 53P5621 - 7029 VOLTAGE REGULATOR MODULE 9840269314

IBM 53P5621 - 7029 VOLTAGE REGULATOR MODULE IBM 53P5621 - 7029 VOLTAGE REGULATOR MODULE [email protected] 9840269314

IBM 24R2750 Voltage Regulator Module for xSeries 346 IBM 24R2750 Voltage Regulator Module for xSeries 346 [email protected] 9840269314

2.4" Inch TFT Touch LCD Display Module For Arduino Video http://youtu.be/mQ5uv9_J_0s Package 01X2.4" Inch TFT Touch LCD Display Module For Arduino UNO R3 Features Compatible with UNO, Duemilanove, Diecimila 2.4" Colour Display, Touch Screen. No soldering just plug and play Tested. Technical Details 2.4" diagonal LCD TFT display 240x320 resolution, 18-bit () color 8 bit digital interface, plus 4 control lines Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD Works with Arduino UNO R3 (Leonardo not supported yet) 5V compatible! Use with 3.3V or 5V logic Onboard 3.3V @ 300mA LDO regulator 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control 4-wire resistive touchscreen Send an email to with Subject as TFT TOUCH DOC for the documents and links once you purchase the product we will share the related date. for related queries feel free to contact us on this number + Power Shipping Shipping Policy Providing A Valid And Working Mobile Number Is Mandatory For Us To Dispatch Your Order. In Case If We Find That The Number Provided By You During Order Placement To Be Incorrect We Reserve The Right To Cancel The Order And Your Amount Will Be Refunded To You Through Paisapay And Your Order Will Not Be Dispatched All orders will be dispatched within 3 working days or earlier. Order once placed cannot be cancelled or modified. Normal courier delivery times are 72 hrs for metro cities and upto 10 days for other areas. These times are only indicative and the actual delivery times may vary. Octroi, if any, will be additional and to be bourne by the buyer. Octroi is not included

See our ratings Add this shop to my favorites Large 7 Segment Multiplexed Display Module ₹ Availability: