12v 20amp 240w dc

12V 20Amp 240W DC Power Supply SMPS for CCTV Camera and LED Strip Light Lamp Note:  This Power Supply Unit "DOES NOT" come with installation instruction, wiring cable, on/off switch, or screws.  Professional installation of qualified electrician is highly recommended.   Colour Choice is not available. Colour may change without Prior Notice.  No Warranty, we checked functionality of each supply before sending. Picture showed here is only for illustration purposes. Shipped item Specifications are 100% matched as mentioned

This is a listing for DC 12V 20A 240W Power Supply Driver, Switch Power Supply Driver, V Hz Product Description: Professional 12 Volt DC 20 Amp power supply is suitable for powering a wide range of applications including CCTV cameras and wireless routers. Features: 100% Brand New Excellent Quality For Access Control System Input Voltage: AC V Hz Output Voltage: 12V DC, 20A, and 240W Output voltage: Adjustment Eange: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal AC input / Full range 100% Full Load Burn-in Test Cooling by Fan/Free Air Convection It's Good Quality and High Performance Great Switching Power Supply for Home Appliances 12V 20A Double/Triple Output Switch Switching Low-cost Power Supply LED Power Supply with a metal body for hidden installation for LED lighting with an energy consumption of maximum 240W Design with Built-in EMI Filter, improve signal precision. Approvals: 3C/FC/ CE EMC Standards: According with GB, EN class A, EN Standards Certifications: CE & RoHs Meet CEC Energy Efficiency Level IV. No Minimum Load. Compact Size Light Weight. High Reliability. Power LED Monitor (LED Glow when

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.rajivihaan.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.gaonsegaon.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit  www.gaonsegaon.com/ecommerce   RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.gaonsegaon.com/ecommerce    

DC 12V to DC volt, 5Amp smps Ideal for, watts MOSFET amp and our 120watt transistor amp Specifications Input. 12v, 20amp Output. v, 5amps Switch. Provided Caution: input wire must be thick otherwise burning of insulation may occur and results

Visit rajivihaan shop on e-Bay for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at for any additional information, or visit www.rajivihaan.com  

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit www.gaonsegaon.com RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit www.gaonsegaon.com  

Visit rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit www.gaonsegaon.com/ecommerce   RAJIVIHAAN - SOLAR HYBRID CHARGE CONTROLLER (HCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V HCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC or Grid AC Mains charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar or AC Mains, and thus protect the batteries from situation of extra current from two different sources. This also enables stable 12V DC output from HCCU to serve as input to 12V DC devices.  - The Solar Charge Hybrid Controller (HCC) is connected to Solar Panel as well as AC Mains.  It charges from one source at a time, with preference to Solar. -  When both Solar and Grid power are available, the Hybrid Charge Controller gives preference to Solar Panels for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging from two sources of power, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- When both Solar and Grid Power available, then preference given to Solar Power. In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar not available, but AC Mains Grid available, then obviously AC supply is converted to DC by the HCCU to serve the DC load, and the battery is also charged by converting AC to DC. When neither Solar, nor Grid available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit www.gaonsegaon.com/ecommerce