Transistors

Manufacturer No: 2N7000 Utmel No: 761-2N7000 Manufacturer: STMicroelectronics USHTS: 8542339000 Description: MOSFET N-CH 60V 350MA TO-92 More Specs

Assorted Transistors  BC327 BC337 BC368 BC369 BC546 BC547 BC548 BC549 BC556 BC557 BC558 BCpcs. from each transistor Total 120pcs. Product Description Warranty 1.- One year guarantee. 2.- If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition). 3.- We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost(from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost. 4.- One we get the returned items, we will send the replaced ones back as soon as possible. 5.- Our warranty does not extend to any products that are physically damaged or under un-normal operating conditions as a result of misuse or improper installation on the parts.   Payment: 1.- Please make sure your payment account is available before you bid the item. 2.- All payments should be cleared within 7days after you receive the item. If you really have difficulty

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, New 6 Pcs Pack of TIP35C & TIP36C Power Transistors (3 pcs each)-  Plastic Package TIP 35C Power Transistor: TIP35 Series NPN 100 V 25 A 125 W Power Transistor TIP 36C Power Transistor: TIP36 Series PNP 100 V 25 A 125 W Power Transistor

High Ampere (5A) Dual Motor Driver H-Bridge Kit   Package includes: § 1x High ampere (5A) Dual Motor Driver PCB § 8x Power Transistors § 4x NPN biasing transistors (2N) § Resistors: 10k Ω (0.25W), 3.3k Ω (0.25W), W), 1k Ω (0.5W) § Capacitor: 1x µf § 8x 1N diode § 3x 5mm screw terminal § 4x LED     Description: §    The motor driver module is based on MOSFETs (Metal Oxide Semiconductor Field Effect Transistor) and power transistors delivering current  up to 5A  (max current). §    The module has 4 inputs(with PWM support): “ IN A ”, “ IN B ”, “ IN C ”, “ IN D ”. §    The working logic is given below:   IN A IN B Direction 0 0 Brake 0 1 CW 1 0 CCW 1 1 Brake

You Will Get: Points Breadboard  = 1     2).  Breadboard hookup / Jumper  wire  = 2 meter 3). Resistors, 0.25 Watt, 5%, (30 Values, 5 Pieces Each) = ). LEDs, 5mm, (Red, Yellow, Green,  10 Each) = 30    5). Ceramic Capacitors, (3 Values, 10 Pieces Each ) = 30     6). Diodes, (1NN uF Electrolytic Capacitors = uF Electrolytic Capacitors = uF Electrolytic Capacitors = uF Electrolytic Capacitors = 2 11). Pushbutton, 5mm(TACTILE) = 3 12). Potentiometer / Trimmers PCB Mountable (5 Values, 1 Each) = 5   13). IR LEDs, 5mm = 1   14). Photodiode = 1     15). CD IC = 1 16). LDR (Light Dependent Resistors), 5mm = 1   17). Thirmistors, 10 K Ohms = 1  18). Buzzer, 5 Volts = 1 19). Battery Caps = 1  20). NE555 Timer ICs = 1     21) OPP 741 IC = 1   22). LM358 Dual Op-Amp ICs = 1   23). LM Volt Voltage Regulator = 1    24). LM317, Variable  Voltage Regulator = 1  25). BC547, NPN Transistors = 5   26). BC557, PNP Transistors = N Transistor = N Transistor = 5            29). Speaker = 1     30) Battery - 1 If you required  specific values you can sms. Shipment Details: We ship the item anywhere

  You Will Get: 1). 840 Points Breadboard  = 1     2).  Breadboard hookup / Jumper  wire  = 2 meter 3). Resistors, 0.25 Watt, 5%, (30 Values, 5 Pieces Each) = 150   4). LEDs, 5mm, (Red, Yellow, Green,  10 Each) = 30    5). Ceramic Capacitors, (3 Values, 10 Pieces Each ) = 30     6). Diodes, (1N4007 = 10 & 1N4148 = 10) = 20     7). 1 uF Electrolytic Capacitors = 10 8). 10 uF Electrolytic Capacitors = 5 9). 100 uF Electrolytic Capacitors = 5 10). 220 uF Electrolytic Capacitors = 2 11). Pushbutton, 5mm(TACTILE) = 3 12). Potentiometer / Trimmers PCB Mountable (5 Values, 1 Each) = 5   13). IR LEDs, 5mm = 1   14). Photodiode = 1     15). CD 4017 IC = 1 16). LDR (Light Dependent Resistors), 5mm = 1   17). Thirmistors, 10 K Ohms = 1  18). Buzzer, 5 Volts = 1 19). Battery Caps = 1  20). NE555 Timer ICs = 1     21) OPP 741 IC = 1   22). LM358 Dual Op-Amp ICs = 1   23). LM7805, 5 Volt Voltage Regulator = 1    24). LM317, Variable  Voltage Regulator = 1  25). BC547, NPN Transistors = 5   26). BC557, PNP Transistors = 5     27) 2N3904 Transistor = 5                28) 2N3906 Transistor = 5            29). Speaker = 1     30) Battery - 1 If you required  specific values you can sms. Shipment Details: We ship the item anywhere

  v/:* {behavior:url(#default#VML);} o/:* {behavior:url(#default#VML);} w/:* {behavior:url(#default#VML);}.shape {behavior:url(#default#VML);}     Intel® Core™ i3-530 Processor, CPU   4M Cache, 2.93 GHz + Intel Gsonic H55 Chipset Motherboard   + CPU FAN   1 Years Manufacturer Warranty Offer All Coupons are available Product Detailed   Specification 1. Intel Gsonic H55 Chipset Motherboard     Product Specification:- Chipset Intel H55 CPU Support::: Intel Ist generation Core i3/i5/i7 LGA 1156 Memory Slot::: 2xDDR3   Dimm Slot, Max 8gb 1066/1333 Mhz Audio::: Realtek ALC662 LAN::: Realtek RTL8105E 100M or RTL8111E/RTL8111F 1000M Expansion Slots::: 1 x PCI Express x16                             2 x PCI Slot                             1 x PCI Express x 1 Storage::: 4 x SATA 3Gb/s USB::: 8 x USB 2.0/1.0 ports Interface::: 1 x CPU Fan Connector                       2 x SATA Connectors                        1 x Front-Panel Audio Header                        2 x USB Pin Headers                         1 x Pin Header for Speaker                          1 x COM Pin Header                             1 x Front-Panel Header                  1 x 24 Pin + 4 Pin power Connector Back Panel::: 1 x PS/2 keyboard/Mouse Port I/O::: 1 x VGA Port         1 x RJ45 Port         4 X USB 2.0 Ports         1 x COM Port         3 Audio Jacks BIOS::: AMI BIOS OS::: Windows(R) XP/Vista/7/8 2. Intel® Core™ i3-530 Processor, CPU 4M Cache, 2.93 GHz with Intel Original Fan Specifications- Essentials Status End of Life Launch Date Q1'10 Processor Number i3-530 # of Cores 2 # of Threads 4 Clock Speed 2.93 GHz Intel® Smart Cache 4 MB DMI 2.5 GT/s Instruction Set 64-bit Instruction Set Extensions SSE4.2 Embedded Options Available No Lithography 32 nm Max TDP 73 W VID Voltage Range 0.6500V-1.4000V Recommended Customer Price BOX: $117.00 Datasheet Link Max Memory Size (dependent on memory type) 16 GB Memory Types DDR3-1066/1333 # of Memory Channels 2 Max Memory Bandwidth 21 GB/s   - Graphics Specifications Processor Graphics ‡ Intel® HD Graphics Graphics Base Frequency 733 MHz Intel® Flexible Display Interface (Intel® FDI) Yes Intel® Clear Video HD Technology Yes # of Displays Supported ‡ 2 - Expansion Options PCI Express Revision 2.0 PCI Express Configurations ‡ 1x16, 2x8 Max # of PCI Express Lanes 16   - Package Specifications Max CPU Configuration 1 T CASE 72.6°C Package Size 37.5mm x 37.5mm Processing Die Size 81 mm 2 # of Processing Die Transistors 382 million Graphics and IMC Lithography 45 nm Graphics and IMC Die Size 114 mm 2 # of Graphics and IMC Die Transistors 177 million Sockets Supported FCLGA1156 Low Halogen Options Available See MDDS - Advanced Technologies Intel® Turbo Boost Technology ‡ No Intel® vPro Technology ‡ No Intel® Hyper-Threading Technology ‡ Yes Intel® Virtualization Technology (VT-x) ‡ Yes Intel® VT-x with Extended Page Tables (EPT) ‡ Yes Intel® 64 ‡ Yes Idle States Yes Enhanced Intel SpeedStep® Technology Yes Intel® Demand Based Switching No Thermal Monitoring Technologies No   - Intel® Data Protection Technology AES New Instructions No - Intel® Platform Protection Technology Trusted Execution Technology ‡ No Execute Disable Bit ‡ Yes D isclaimer. All information is taken from websites. We cannot guarantee that the information on this page is 100% correct.           Limited cash Back offer hurry up use coupon.                          You got 10% discount Flat          coupon:- TYROO1                   Enter this coupon during checkout.You got 10% flat cash back     Shipping Item Will be ship within Three days of timeline. Shipping would be done through Powership Service (Blue Dart Express). If the Power ship is not available than we Ship through alternate Courier So buyer may confirm before order that Blue Dart is available or not at their place. For non-serviceable location of Powership Service we will do 100% refunds. Click Here To Check Blue Dart Delivery Service Location   Shipping would be done only through Blue Dart Express. Where are the service is not available we will ship through ARAMEX, DTDC, SPEED POST. This will take around 7 -10 days to deliver the items.Buyer may confirm before order that courier is not available at their place. In case your area is not serviceable then you can give the Pin code of the Town so that we can check with courier Agency. For non-serviceable location we will do 100% refunds Allow at least 6-7 days to complete delivery when bluedart is not avilable   Sales Tax/VAT and Octroi as per applicable & will be borne by the buyer.   Please open all parcels

Product Contents 1. Enhanced Breadboard Power Supply (Input Voltage 6.5V to 12V, Output Violate 3.3V or 5.0V via switches) 2. MB-102 Color breadboard 3. 65 Root Breadboard Cables Product Features A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. Parts will not be damaged so they will be available for re-use afterwards. 100% Brand New & High Quality! Reusable for fast build a prototype of an electronic circuit Each unit will accept transistors, diodes, LEDS, resistors, capacitors and virtually all types of components No soldering required Can modify or revise the circuits easily Similar prototyping printed circuit boards An invaluable tool for experimenting with circuit designs whether Superior Quality, Free Shipping

New Page 1 New Page 1 New Adjustable Anti-Static Wrist Strap Band PRODUCT DESCRIPTION-: New Adjustable Anti-Static Wrist Strap Band You must have one anti-static wrist strap band when doing PC repair, electronics work, computer network testing, or just working with sensitive electronic components (integrated circuits, transistors, etc). Just wrap the adjustable strap around your wrist and clip the agitator clip to a grounded source and you're ready to go. Don't let dangerous ESD (Electronic Static Discharge) destroy your sensitive electronics (PC, TIVO, PDA, Network, etc). Description:   Prevent static shock

We accept Paisapay New Page 1 New Page 1 PRODUCT DESCRIPTION-: Adjustable Anti-Static Wrist Strap Band You must have one anti-static wrist strap band when doing PC repair, electronics work, computer network testing, or just working with sensitive electronic components (integrated circuits, transistors, etc). Just wrap the adjustable strap around your wrist and clip the agitator clip to a grounded source and you're ready to go. Don't let dangerous ESD (Electronic Static Discharge) destroy your sensitive electronics (PC, TIVO, PDA, Network, etc). Description:   Prevent static shock

High Ampere Dual Motor Driver H-Bridge Module   Package includes: §   1 x High ampere (4A) Dual Motor Driver module   Description: §   The motor driver module is based on MOSFETs (Metal Oxide Semiconductor Field Effect Transistor) and power transistors delivering current up to 5A (max current). §   The module has 4 inputs: “ IN A ”, “ IN B ”, “ IN C ”, “ IN D ”. §   The working logic is given below:   IN A IN B Direction 0 0 Brake 0 1 CW 1 0 CCW 1 1 Brake

New Page 1 New Page 2 PRODUCT DESCRIPTION-: Adjustable Anti-Static Wrist Strap Band You must have one anti-static wrist strap band when doing PC repair, electronics work, computer network testing, or just working with sensitive electronic components (integrated circuits, transistors, etc). Just wrap the adjustable strap around your wrist and clip the agitator clip to a grounded source and you're ready to go. Don't let dangerous ESD (Electronic Static Discharge) destroy your sensitive electronics (PC, TIVO, PDA, Network, etc). Description:   Prevent static shock

DO NOT BUY UNLESS ASKED BY SELLER. Contact seller for more information. pcs Assorted transistors combo BC547 BCNN NPN PNP 25 pcs each 2. 25 pcs Breadboard wire

New Page 1 New Page 1 New Page 1 PRODUCT DESCRIPTION-: Adjustable Anti-Static Wrist Strap Band You must have one anti-static wrist strap band when doing PC repair, electronics work, computer network testing, or just working with sensitive electronic components (integrated circuits, transistors, etc). Just wrap the adjustable strap around your wrist and clip the agitator clip to a grounded source and you're ready to go. Don't let dangerous ESD (Electronic Static Discharge) destroy your sensitive electronics (PC, TIVO, PDA, Network, etc). Description:   Prevent static shock

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit): All resistors (1% metal film) Power resistors Faston connectors Silpad 400 insulators Silver Mica compensation capacitors MJE drivers MJL output transistors (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors Main Heat Sink (100 mm x 182 mm x 19 mm - 1 No.) and Heat Sink for LME No. Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 5 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail:

New L293D motor shield, the input voltage DCV 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES The Device is a mnolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC  and stepping motors) and switching power transistors.To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 7 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Branded components): All resistors (1% metal film)  Power resistors (CRC) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) Main Heat Sink required (100 mm x 260 mm x 32 mm - 1 No.) - NOT INCLUDED. Note:- Amplifier Output Power 350 Watt @ 8 Ohms and 550 Watt @ 4 Ohms (Power supply: Volt 7 Amps) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors,) Rs./- Shipping charge extra. Contact details:- E-Mail: Mob. No.:

Metal Oxide Semiconductor(MOS) Field Effect Transistor(FET) Assorted Kit 4-Type of FETs 4-Pieces High Quality Branded Field Effect Transistors

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  2SCSA output devices. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit without Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors (Manufacturer: Toshiba ) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 250 Watt @ 8 Ohms and 400 Watt @ 4 Ohms (Power supply required: Volt 6 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Contact No.: Mob. No. 

Transistor Pack Total No.- different transistors List: Pack of 10: BC547 BC548 BC338 Pack of 5: BC337 BC338 BC558 BC327 BCNNL05 C C ZSC

The Little Dot I+ is a hybrid transistor-vacuum tube headphone amplifier, which combines the smooth, musical sound of tubes with the high output current of transistors. The vacuum tube stage is run

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 8 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Reputed Brands component): All resistors (1% metal film)  Power resistors (Stead) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) MAIN HEAT SINK INCLUDED. Contact details:- E-Mail: Mob. No.

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 8 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

Biostar H61MLV3  Micro-ATX Motherboard LGA With 3 Year Manufacturer Warranty Genuine Product + VAT Paid Bill Chipset Intel H61 Intel LGA   Supports 3rd & 2nd Generation Intel Processors.  Check supported CPU MEMORY Support Dual Channel DDR MHz Max. Supports up to 16GB Memory HD Audio USB Polyswitch OC / OV / OH Protection Moistureproof PCB ESD Protection UEFI BIOS 3 Year Stnadard Manufacturer Warranty Intel LGA rd Generation Intel Core™ Processor support Intel 3rd generation processor "Ivy Bridge" is the codename for Intel's 22nm of the Sandy Bridge microarchitecture. The first to use tri-gate("3D") transistors, it is also backwards-compatible with the Sandy Bridge platform requiring a BIOS/firmware update. Dual Channel DDR3 Delivering native support for DDR3 memory of up to MHz, motherboards allow users to easily reach higher memory frequencies at lower voltages thus, achieving higher memory performance.     HD Audio Provides high quality sound with minimal loss of audio fidelity. PCI-E Gen 3.0 Ready PCI-E 3.0 is the next evolution of the ubiquitous and general-purpose PCI Express I/O standard. At 8GT/s bit rate, the interconnect performance bandwidth is doubled over PCI-E 2.0, while preserving compatibility with software and mechanical interfaces.     USB Polyswitch On board dedicated power fuse to help prevent USB port failure. It prevents USB Port overcurrent and safegurand your system and device lifespan. OC / OV / OH Protection All BIOSTAR special circuit design detects overvoltage conditions and prevents voltage surges from spreading

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Amplifier Kit with Main heat sink and Power Supply Kit): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply Transformer required: Volt 5 Amps- NOT INCLUDED) With Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 2 x 150 Watts @ 8 Ohms and 2 x 250 Watts @ 4 Ohms. Required Power Supply transformer Volts, 10 Amps (Not Included). Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- El. cr ) Fastron connectors Silpad insulators Silver Mica compensation capacitors (Manufacturer:Kemet/ACE) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors. Electrolytic Capacitors (Manufacturer: Keltron) Note:- Amplifier Output Power 2 x 150 Watt @ 8 Ohms and 2 x 250 Watt @ 4 Ohms (Power supply: Volt 10 Amps)  Contact details:- E-Mail: Any Query Please call on: Mob. No. 

120watts AMP boards +Rectifier filter power KIT + Tone control Kit Over view: here is a new BJT ampifier board using toshiba transistors 2SCSA, gives very crispy n clean audio output, can be used as speaker amp and subwoofer amp or

About: Have a Micro-controller and a development board(Arduino, Freeduino, , AVR or PIC), But having a hard time with no components OR finding components? Right here! is the solution.  This "Micro-controller components kit" includes all the components needed to learn all the basics about the micro-controller you have. NOTE:  This kit does NOT include any Development Board, Instead it has components needed to learn about micro-controllers.  Package includes: Product Quantity 01.  Battery snap .  DC jack(9V) .  B read-board(Medium sized with 640 tie-in Points) .  Motor w/ Fan 01 each 05.  Potentiometer(pot - 22kOhm) .  Capacitors(100uF, 22uF, 10uF and 1uF) 05 each 07.  LED's(White, Red, Green and Blue) 05 each 08.  IR pai r(IR-Emitter and IR-Sensor) 02 each 09.  7-segment display .  Push buttons    .  Transistors(BC547 and BC each 12.  LDR(Light Dependent Resistor - also called Photo-resistor) .  Regulator( and LM each 14.  Resistance box(all standard values - Upto 20 different values)     01 box 15.  LCD display(16x.  F-F wires(4 different colors) 05 each 17.  Single strand wires(5 different colors) 03 each

Assorted Transistors  BC327 BC337 BC368 BC369 BC546 BC547 BC548 BC549  BC557 BC558 BCpcs. from each transistor Total 110pcs. Product Description Warranty 1.- One year guarantee. 2.- If the item is defective upon receipt, it should be within 7days from the date of receipt for exchange a new one (Buyer should return all original and undamaged items under re-saleable condition). 3.- We supply free repairing service within one year of purchase. For the first 1 month, we will pay one way shipping cost(from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost. 4.- One we get the returned items, we will send the replaced ones back as soon as possible. 5.- Our warranty does not extend to any products that are physically damaged or under un-normal operating conditions as a result of misuse or improper installation on the parts.   Payment: 1.- Please make sure your payment account is available before you bid the item. 2.- All payments should be cleared within 7days after you receive the item. If you really have difficulty

New Page 1 New Page 1 PRODUCT DESCRIPTION-: Adjustable Anti-Static Wrist Strap Band You must have one anti-static wrist strap band when doing PC repair, electronics work, computer network testing, or just working with sensitive electronic components (integrated circuits, transistors, etc). Just wrap the adjustable strap around your wrist and clip the agitator clip to a grounded source and you're ready to go. Don't let dangerous ESD (Electronic Static Discharge) destroy your sensitive electronics (PC, TIVO, PDA, Network, etc). Description:   Prevent static shock