Adxl345 axis

ADXL345 Triple-Axis Digital Accelerometer   Module ADXL345 can be used with AVR, ARM, PIC via SPI   Description:   The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.   Features: Digital Output: SPI / I2C Ultralow power: as low as 23 μA

Description The ADXL345 is a low-power, 3-axis MEMS accelerometer modules with both I2C and SPI interfaces. The Adafruit Breakout boards for these modules feature on-board 3.3v voltage regulation and level shifting which makes them simple to interface with 5v microcontrollers such as the Arduino. 2.0-3.6VDC Supply Voltage Ultra Low Power: 40uA

ADXL-345 Triple Axis Acceleration Module for Arduino and other MCU ADXL-345 Triple Axis Acceleration Module for Arduino and other MCU The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is acces-sible through either a SPI (3- or 4-wire) or I2C digital interface.  The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity

Description The ADXL345 is a low-power, 3-axis MEMS accelerometer modules with both I2C and SPI interfaces. The Adafruit Breakout boards for these modules feature on-board 3.3v voltage regulation and level shifting which makes them simple to interface with 5v microcontrollers such as the Arduino. VDC Supply Voltage Ultra Low Power: 40uA

Description 100% brand new and high quality On-board ADXL345 digital output(support the I2C/SPI), low-power, compact acceleration sensor. Support 5V/3.3V voltage input, on-board RT power chip, lower pressure drop faster than the , faster load speed of response very suitable for high-noise power supply environment Common pins are leaded out, pins standard 100mil (2.54mm), convenient for the dot matrix board. Features VCC voltage module operating voltage and good power filtering; Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 433M of about 17cm; Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter. Specification PCB size::28 (mm) x14 (mm) Color:As shown SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

Description 100% brand new and high quality On-board ADXL345 digital output(support the I2C/SPI), low-power, compact acceleration sensor. Support 5V/3.3V voltage input, on-board RT power chip, lower pressure drop faster than the , faster load speed of response very suitable for high-noise power supply environment Common pins are leaded out, pins standard 100mil (2.54mm), convenient for the dot matrix board. Features VCC voltage module operating voltage and good power filtering; Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 433M of about 17cm; Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter. Specification PCB size::28 (mm) x14 (mm) Color:As shown   Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings