Aeromodelling quad power

Designed in house by the HobbyKing Enginerds, this handy power distribution board has the same foot print as our Multri-rotor control boards and is the ultimate solution for tidy power distribution wiring. Simply use 3.5mm male connectors on your ESCs and plug a battery in. The PCB is Gold plated for optimality efficiency and also features a bling port (aka 2 pin JST size auxiliary power out) Perfect for powering LEDs or any accessory fitted to your Quadcopter. Features. Current:  4 x 20A Outputs (MAX) Power Input:  XT60 with 12AWG wire Motor output:  4 x 3.5mm Female bullet plug Aux output:  2 pin JST compatible Weight:  27.3g (including wires)

The Easiest Way To Enjoy Nitro Heli This is a 95% assembled and ready to fly nitro helicopter. Thunder Tiger is giving a total solution and you worry about nothing but how to get the helicopter into the air. Thunder Tiger Raptor series helicopter were designed and engineered by world-renowned Mr. Shigetada Taya from Japan.  Since the introduction of the original Raptor 30, it has been the most popular 30-size helicopter and helped pilots learn new 3-D maneuvers the world over. Thunder Tiger also developed a new PRO-39H(R) ringed engine for the 30-size helicopters.  The new PRO-39H(R) delivers much sharper transition characteristics and, combined with a new carburetor, the engine is much easier to adjust to match your preferred settings.  The new engine produces much more power than any other available 30-size engines and once mounted on the Raptor 30 V2, the heli opens up a complete new experience in its own class. Photo Gallery   Rugged Collective Pitch Control Arm Solid 6mm Spindle Wider Tank with 340cc Capacity   Stable in air Flying Invert Flying vertical Invert Features 1. Rugged Collective Pitch Control Arm 2. 6mm Engine Starting Shaft 3. Solid 6mm Spindle 4. Oversized Tai Rotor Grip as R60 5. Lengthened Vertical Fin by 10mm 6. Rigid Boom Support With Plastic End 7. Wider Tank with 340cc Capacity Warranty: This Heli is guranteed to be free from defects in material and workmanship at the date of purchase. This warranty does not cover any damage caused by use or modification. Specification Full Length of Fuselage: 45.27" (1150mm) Full Width of Fuselage  : 5.51" (140mm) Total Height                      : 15.75" (400mm) Main Rotor Dia                : 49" (1245mm) Tail Rotor Dia                    : 9.3" (236mm) Gear Ratio                        : 9.56:1:4.57 Full Equipped Weight    : 6.6 lbs (3000g) Engine                                : Pro.39H (R) Items Included 1.Raptor 30 V2 x 1 2.PRO-39H(R) x 1 4.S1903 Standard Servo x 4 5.DS0606 Digital Rudder Servo x 1 6.TG-7000 Heading Lock Gyro x 1   Items Required to complete this Helicopter. -Digital radio minimum 6ch with Reciver, Battery & charger -Nitro Fuel minimum 15% Included 5 litre - Field Equiptments.Engine Starter minimum 90 size.Starter Hex 6mm.Glow plug booster with charger.Fuel Pump with fuel tubing

Rc plane Nitro fuel 5%  in 5 Litre pack For unbelievable power. This is a 5 litre pack.

2PCS Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 2 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 1 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

10PCS Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 10 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

5PCS Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 5 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

Tanotis Imported Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 1 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

Tanotis Imported 2PCS Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 2 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

Tanotis Imported 5PCS Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 5 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

Tanotis Imported 10PCS Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling Description Description Size: 20 * 20 * 5mm Input voltage: 4.75V-24V Output voltage: 0.92V-15V Output Current: 2A (maximum) Voltage Regulation: 2.5% Load Regulation: 0.5% Load Regulation: 0.5% Output ripple: 30mV (max) Switching frequency: 1.2MHz Operating Temperature: -40 to +85 Conversion efficiency: 95% (the highest) Module Properties: non-isolated step-down (BUCK) Rectification: non-synchronous rectification Package Included: 10 x Mini DC-DC Buck Converter Step Down Module Power Supply For aeromodelling

NEEWER® V912 Larger Alloy 52cm 2.4G 4CH Channel RC Remote Control Gyro Helicopter Description NEEWER is a registered trademark. ONLY Authorized seller of NEEWER can sell under NEEWER listings. With LED, So that flying at night. Control distance: m. Flight time: About 8 minutes Charging time: Approx 120 minutes Digital full 3D control remotely with power saving mode. Remote Control Power Supply: 4 x AA batteries (not included) Main rotor diameter: 530mm Dimensions: cm (L x W X H) Packing Weight: Approx g. as the helicopter has 70cm large. We will update the original packing. So that can convenient to ship. Easy and Convenient to use. NOTE: Aeromodelling knowledge & flying experience required, rookies or children under 16-year old are advised not to buy! Any damage during mishandling (such as crash) is not covered

NEEWER® V912 Larger Alloy 52cm 2.4G 4CH Channel RC Remote Control Gyro Helicopter Description NEEWER is a registered trademark. ONLY Authorized seller of NEEWER can sell under NEEWER listings. With LED, So that flying at night. Control distance: 100-200m. Flight time: About 8 minutes Charging time: Approx 120 minutes Digital full 3D control remotely with power saving mode. Remote Control Power Supply: 4 x AA batteries (not included) Main rotor diameter: 530mm Dimensions: 52*8*15.5cm (L x W X H) Packing Weight: Approx 1050 g. as the helicopter has 70cm large. We will update the original packing. So that can convenient to ship. Easy and Convenient to use. NOTE: Aeromodelling knowledge & flying experience required, rookies or children under 16-year old are advised not to buy! Any damage during mishandling (such as crash) is not covered

This is a Combo for Quadcopter / Aeromodelling / Multirotor.  Package Includes -  A Brushless Motor (BLDC) kv - 1pc 30A Electronic Speed Control (ESC) - 1pc Propeller CW & CCW Pair - 1 pair. Below are individual specifications for the components.  A Brushless Motor KV  Specifications: - AKV - RPM/V: - Stator Diameter(mm):22 -  Stator length(mm): 13 -  Stator Arms(mm): 12 -  Magnet Poles: 14 -  Motor Winding: 22 -  RPM(KV): -  Idle Current(A): -  Max Current (A): 17 -  Max Power(W): -  Rotor Dia(mm): 28 -  Shaft Dia(mm): 3.17 -  Motor Length(mm): 28 -  Overall Length(mm): 42 - Biggest Thrust g/S:     Comes with Prop adapter, Motor Mount and 4 screws; exactly as shown

Product Description:   This is a Combo for Quadcopter / Aeromodelling / Multirotor.  Package Includes -  A Brushless Motor (BLDC) kv - 1pc 30A Electronic Speed Control (ESC) - 1pc Propeller CW & CCW Pair - 1 pair. Below are individual specifications for the components.  A Brushless Motor KV  Specifications: - AKV - RPM/V: - Stator Diameter(mm):22 -  Stator length(mm): 13 -  Stator Arms(mm): 12 -  Magnet Poles: 14 -  Motor Winding: 18 -  RPM(KV): -  Idle Current(A): -  Max Current (A): 20 -  Max Power(W): -  Rotor Dia(mm): 28 -  Shaft Dia(mm): 3.17 -  Motor Length(mm): 28 -  Overall Length(mm): 42 - Biggest Thrust g/S:     Comes with Prop adapter, Motor Mount and 4 screws; exactly as shown