Audio kit

Features:        Support USB,TF card Support MP3 Song number display Song selection mode Forward and backward selection With audio With IR remote control With the LINE input (AUX) With led display Support FM radio FM Channels MHz Auto channel scan and save provision Support 5v voltage PCB size：mm Panel size：mm DC Input：5V External Antenna connection for FM LCD screen Displays audio File information & Frequency Digital volume level display Volume Up /down buttons In this kit are completely ready for use just want a regulated 5 volt power supply and a amplifier. 5 volt regulated dc power are needed  for running this kit, remind that power supply is well regulated otherwise its output sound give pop up noise. This kit can be use with any existing music system/ Radio/ Old deack player etc. Power supply available from 220 to 5 v, 12 v to 5 v. And stereo audio amplifier (not included

Features:        Bluetooth Support USB,TF card Support MP3 Song number display Song selection mode Forward and backward selection With audio With IR remote control With the LINE input (AUX) With led display Support FM radio FM Channels 87.5 – 108 MHz Auto channel scan and save provision Support 5v voltage PCB size：75*20mm Panel size：106*25mm DC Input：5V External Antenna connection for FM LCD screen Displays audio File information & Frequency Digital volume level display Volume Up /down buttons To use Bluetooth set the mode to Bluetooth and search with your phone or any Bluetooth device and connect. It will automatically paired with that device. In this kit are completely ready for use just want a regulated 5 volt power supply and a amplifier. 5 volt regulated dc power are needed  for running this kit, remind that power supply is well regulated otherwise its output sound give pop up noise. This kit can be use with any existing music system/ Radio/ Old deack player etc. Power supply available from 220 to 5 v, 12 v to 5 v. And stereo audio amplifier (not included

Features:        Support USB,TF card Support MP3 With audio With IR remote control With the LINE input with led display Support FM radio Support 5v voltage PCB size：mm Panel size：mm DC Input：5V External Antenna connection for FM LCD screen Displays audio File information & Frequency This kit does not include audio amplifier circuit so need to connect with any existing music system/ Radio/ Old deack player etc. Power supply available from 220 to 5 v, 12 v to 5 v. And stereo audio amplifier (not included

its very useful for car audio it works on 12 volt supply it has 4channel amplifier very compatible.... it's with bass treble kit..n control special feature is...it has mid frequency control.. size is very compact n output is 40* 4channel

stk has maximum output up to 180 watts it includes bass treble kit also ready to use.... with tone controls & Mic preamp kit very compatible all components r very good quality In case if you have any query, please feel free to contact us. 

IOGEAR VGA Cat5e / Cat6 Extender Kit with Audio GVE130V2. Extend the reach of your VGA video with IOGEAR s VGA Video Extension over Cat 5e Cat 6 with Audio Kit. The VGA video and audio extender kit includes a local sender unit and a remote receiver unit providing an out-of-the-box single cable solution. Ideal for environments where VGA video and audio must be transmitted over longer distances of up to 650ft (200m). The VGA Cat 5e Cat 6 Extender Kit with Audio is ideal for any installation where a remote VGA display needs to reside

Great Working Condition I used it for making a documentary some years back, now do not use it any more. Bought the Microphone for   800  Sony recorder for                                                   Total = around 2 years old

Audio Dancing LED kit is a fun filled project which generates a LED dancing sequence depending on the audio it senses.  This kit is based on one of the VU Meter IC's available. Power supply input 6 to 9 VDC Output 5 LED's Onboard preset to adjust audio level to the IC Onboard microphone capsule with Preamp Terminal pins for connecting power supply input Four mounting holes of 3.2 mm each PCB dimensions 39 mm x 67 mm

Audio Signal to Light Unit kit is an audio to light modulator, which controls the intensity of light

BUY WITH CONFIDENCE!!!!! Please Check your PinCode service by Eb ay Powership before ordering If your pincode is not serviceable, then please do not order! 3 Feet Black 4 Gauge Ground Cable 17 Feet Blue 4 Gauge Power Cable Designed for Watt Power Gold Plated Connectors Oxygen-Free Copper 17 Feet 2 Channel Interconnect NSW Audio - Universal Car Amplifier Installation / Wiring Amp Kit 4 Gauge A high quality audio product needs high quality connections to produce the best sound possible. NSW Audio brings to you the amp kit 4gauge PC-04GA for your car entertainment system. The amplifier kit is a complete kit with all the essentials for a professional installation. The kit consists of a  17 feet Blue 4 Gauge Power cable  and a  3 Feet Black 4 Gauge Ground cable. It also has a  17 feet interconnect. All the cables are made of  oxygen-free copper  for pure uninterrupted power transmission. The cable jacket is extremely rugged yet flexible. It adheres to  CEA , the industry standard for wire gauge. The kit is  water and fire resistant  for maximum safety. The kit has  gold plated connectors  to prevent corrosion. It is designed for up to  Watts power transmission. About NSW Audio: NSW Audio is a decade-old company which designs and engineers high performance Car Audio Accessories for the US Market. Its product offerings include wires, inter-connects Bass Tube, Capacitors noise dampening material and other car accessories. Payment: Payment is accepted by Paisapay only. Paisapay is the safest way to pay on . Warranty and Guarantee Policy: If you are not satisfied when you receive your item, Please  Return The Product With original Un-Opened Condition [With All Accessories & Box]  within 7 days for a replacement. Please contact me before you return it. If item is defective after receiving, you can send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.   VERY IMPORTANT:   Please open the package

BUY WITH CONFIDENCE!!!!! Please Check your PinCode service by Eb ay Powership before ordering If your pincode is not serviceable, then please do not order! 3 Feet Black 4 Gauge Ground Cable 17 Feet Blue 4 Gauge Power Cable Designed for Watt Power Gold Plated Connectors Oxygen-Free Copper 17 Feet 2 Channel Interconnect NSW Audio - Universal Car Amplifier Installation / Wiring Amp Kit 8 Gauge A high quality audio product needs high quality connections to produce the best sound possible. NSW Audio brings to you the amp kit 4gauge PC-04GA for your car entertainment system. The amplifier kit is a complete kit with all the essentials for a professional installation. The kit consists of a  17 feet Blue 4 Gauge Power cable  and a  3 Feet Black 4 Gauge Ground cable. It also has a  17 feet interconnect. All the cables are made of  oxygen-free copper  for pure uninterrupted power transmission. The cable jacket is extremely rugged yet flexible. It adheres to  CEA , the industry standard for wire gauge. The kit is  water and fire resistant  for maximum safety. The kit has  gold plated connectors  to prevent corrosion. It is designed for up to  Watts power transmission. About NSW Audio: NSW Audio is a decade-old company which designs and engineers high performance Car Audio Accessories for the US Market. Its product offerings include wires, inter-connects Bass Tube, Capacitors noise dampening material and other car accessories. Payment: Payment is accepted by Paisapay only. Paisapay is the safest way to pay on . Warranty and Guarantee Policy: If you are not satisfied when you receive your item, Please  Return The Product With original Un-Opened Condition [With All Accessories & Box]  within 7 days for a replacement. Please contact me before you return it. If item is defective after receiving, you can send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.   VERY IMPORTANT:   Please open the package

For Sale 240w RMS Audio Amplifier with Transformer and Cabinet all Assembled. This a True 240w RMS Audio Amplifier, Needs a Transformer, 5 Amp. Very High Bass, Get good 60w woofer or you will end up burning cheap woofers. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 240w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 48v with center tap. Now 48v 5Amp is 240w RMS. So you can be sure that the device that you buy will give you more than 240w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 240w. The board support's 90w per channel plus a 60w woofer on a separate connection. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. You Can Connect Two Speakers and a Sub woofer for Bass (i.e. 2.1 Channel) This Amplifier has Very high Bass. The Kit comes with functions such as Bass,Treble and Volume.  Package Contains:  1 X 240W 2.1 Channel Amplifier Board 1 X A Transformer 1 X Cabinet + Accessories (Knobs,Fans,etc)  1 X Stereo Audio Receiver with FM, USB Assembling takes four Day No Bluetooth

This a True 200w RMS Audio Amplifier, Needs a Transformer, 5 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 200w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 40v with center tap. Now 40v 5Amp is 200w RMS. So you can be sure that the device that you buy will give you more than 200w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 200w but Practically you can run it at close to 240w RMS with a power supply of   at 6 Amps. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 70w RMS Audio Amplifier, Needs a Transformer, 3 Amp. You can run it using a 12v battery too, Just short the two 12v and use them as one. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 70w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 24v with center tap. Now 24v 3Amp is 72w RMS. So you can be sure that the device that you buy will give you more than 70w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 70w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. The dimension of the kit is 12x6x4 Cms. For sale is only the Amplifier. No transformer is included

This a True 120w RMS Audio Amplifier, Needs a Transformer, 3 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 120w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 40v with center tap. Now 40v 3Amp is 120w RMS. So you can be sure that the device that you buy will give you more than 100w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 120w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 70w RMS Audio Amplifier, Needs a Transformer, 3 Amp. You can run it using a 12v battery too, Just short the two 12v and use them as one. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 70w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. The primary IC for this board is Philips TDA. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 24v with center tap. Now 24v 3Amp is 72w RMS. So you can be sure that the device that you buy will give you more than 70w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 70w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. The dimension of the kit is 12x6x4 Cms. For sale is only the Amplifier. No transformer is included

This a True 60w RMS Audio Amplifier, Needs a 12-0 Transformer, 5 Amp on AC. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 60w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. 12-0 means 12v. Now 12v 6Amp is 60w RMS. So you can be sure that the device that you buy will give you more than 55w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 60w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

This a True 60w RMS Audio Amplifier, Needs a 12-0 Transformer, 5 Amp on AC. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 60w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. The primary driver for this board is the popular IC. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. 12-0 means 12v. Now 12v 6Amp is 60w RMS. So you can be sure that the device that you buy will give you more than 55w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 60w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

The Stereo Audio Preamplifier kit has been developed to amplify the low level stereo audio signal.  It can be used as Mic preamplifier etc. Power supply: VDC @ 40 mA Onboard PRESET to adjust Gain, Level Berg connector for connecting of input and output Terminal pins for connecting power supply input Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 47 mm x 58 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram Note: KOTEQ offers custom design and modification services for most of our  products, please contact us for  specific requirement.

The Mono Audio Preamplifier kit has been developed to amplify the low level audio signals.  It is based on commonly available Op-Amp.  It can be used as a Mic preamplifier etc. Power supply: VDC @ 20 mA Output: Gain 35 adjustable Onboard PRESET to adjust Gain, Level Terminal pins for connecting power supply, input and output Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 44 mm x 42 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram  Note: KOTEQ offers custom design and modification services for most of our  products, please contact us  for  specific requirement.

LM Stereo 14W Audio Amplifier kit can be used for High-end Stereo TVs, Compact Stereo etc. Dual power supply - ±18 VDC Output power - 14 W + 14 W, 8 Ohm Less then 10% THD+N from 20 Hz - 20 KHz Onboard slide switch for mute and standby mode Terminal pins for connecting left and right audio signal inputs Relimate connector for connecting Potentiometer (POT) for volume adjustment Power Battery Terminal (PBT) for easy dual power supply and speakers connection Power-On LED indicator Heatsink for IC Four mounting holes of 3.2 mm each with nut and stud PCB dimensions 82 mm x 88 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram   Note: KOTEQ offers custom design and modification services for most of our  products, please contact us   for  specific requirement.

The Tiny Audio Amplifier kit is a good choice for battery operation.  It is based on National Semiconductor LM386 IC. Wide power supply input 6 to 12 VDC 500 mW output @ 8 Ohms load Low quiescent current drain 4 mA IC Onboard preset for volume adjust Berg connector for connecting power supply, audio signal and speaker Onboard power indication LED On/Off PCB mounted slide switch for power supply Four mounting holes of 3.2 mm each PCB dimensions 41 mm x 41 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram   Note: KOTEQ offers custom design and modification services for most of our  products, please contact us   for  specific requirement.

C2G / Cables to Go TruLink VGA+3.5mm Audio over Cat5 Box Transmitter/ Box Receiver Kit. The VGA+3.5mm Audio over UTP Box Transmitter to Box Receiver Kit allows you to extend a VGA and 3.5mm audio signal over two Cat5 Cat5e Cat6 cables up to 300ft without signal degradation at x or x resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. In addition this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end. EQ (sharpness) adjustments can be made for optimal signal clarity. The EDID copy feature ensures compatibility with any monitor. Built-In power surge protection and high ground loop immunity ensure high performance signal extension. Longer distances can be achieved at lower resolutions - System Reqs: Source device with a standard VGA video and stereo audio outputs. One transmitter box or wall plate. Two standard UTP cables (CAT5 Cat5e CAT6) of identical length. One receiver box or wall plate. Display device with a standard VGA and stereo audio input Cat5e or CAT6 is recommended for this product. STP cabling is recommended for environments with high EMI or RFI.

AUVIO MM) AUDIO CABLE AND ADAPTERS KIT. This kit includes common audio cables and connectors to help you connect your equipment

C2G / Cables to Go TruLink VGA+3.5mm Audio over Cat5 Wall Plate Transmitter/ Wall Plate Receiver Kit. The VGA+3.5mm Audio over UTP Wall Plate Transmitter to Wall Plate Receiver Kit allows you to extend a VGA and 3.5mm audio signal over two Cat5 Cat5e Cat6 unshielded twisted pair cables up to 300ft without signal degradation at x or x resolutions. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. In addition this solution utilizes phantom power providing you the flexibility to power at either the transmitter or receiver end. EQ (sharpness) adjustments can be made for optimal signal clarity. The EDID copy feature ensures compatibility with any monitor. Built-In power surge protection and high ground loop immunity ensure high performance signal extension.Longer distances can be achieved at lower resolutions Uses: Classrooms Conference rooms Corporate environments Houses of worship Healthcare Digital signage System Reqs Source device with a standard VGA video and stereo audio outputs One transmitter box or wall plate Two standard UTP cables (CAT5 Cat5e CAT6) of identical length One receiver box or wall plate Display device with a standard VGA and stereo audio input Cat5e or CAT6 is recommended for this product. STP cabling is recommended for environments with high EMI or RFI.

Scosche IU335K Hardware Connectivity Kit.. Now you can connect your headphones or 3.5mm audio cables to all of your favorite audio sources with high quality injection molded adapters. This kit includes:3 foot audio cable2.5mm cell phone adapteriPhone adapterdual mono airplane adapterheadphone splitter

GE Portable Audio Extension Kit 18 ft. - . GE Portable Audio Extension Kit 18 ft. - ft. 3.5 mm coiled cable with assorted adapters.Features:4 Adapters included: 3.5mm headphone splitter3.5mm jack to 1 4 plug1 4 jack to 3.4mm plug and 3.5mm plug to 3.5mm plug.18 ft coiled cable included as well..

This a True 300w RMS Audio Amplifier, Needs a Transformer, 5 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 300w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 56v with center tap. Now 56v 6Amp is 336w RMS. So you can be sure that the device that you buy will give you more than 300w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 300w but Practically you can run it at close to 330w RMS with a power supply of   at 6 Amps. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included

2.1 AUDIO AMPLIFIER KIT IT CONTAINS STK STK & TDA IC USED FOR SUBWOOFER MONO CHANNEL & USED FOR SUUROUND CHANNEL It works on v – 3amp or 5amp supply total power output is 180 watts rms It’s more than watt pmpo kit is ready to use for 2.1 purpose It has bass treble kit with tone controls input & output connector   In case if you have any query, please feel free to contact us. 

This a True 240w RMS Audio Amplifier, Needs a Transformer, 5 Amp. Very High Bass, Get good 60w woofer or you will end up burning cheap woofers. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 240w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 48v with center tap. Now 48v 5Amp is 240w RMS. So you can be sure that the device that you buy will give you more than 240w Pure RMS and NOT CHEAP PMPO. Also the kit contains a Microphone Input which is Yellow and Blue colour and a 12V input for the Microphone which is Red and white. We have never tested the microphone feature but you can do it and let us know about the same. Also this Kit can officially drive up to 240w. The board support's 90w per channel plus a 60w woofer on a separate connection. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. For sale is only the Amplifier. No transformer is included