Blazer ic turbo

Product Description Note Not Genuine IC will have much more error programming. This is a redesigned CP module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled as FTDI, so you can directly upload sketch with this one. So what is the advantage? The price is almost only one third of the FTDI basic Features: Use SILABS’s CP chip, performance is definitely more than made ​​PL, encroaching FT232RL. Full board design, full-featured interface. With RXD TXD RST 3.3V 5V DTR DCD RI RTS CTS and other full-featured interface. Some boards can’t work with normal CP boards because of the incomplete interface, now it is not a problem anymore. With 500mA resettable fuse   designed to prevent users from burning power pick the wrong computer USB, this is a must. Get hold of the plate board computer motherboard burned more harm than good. With power indicator light. Directly computer USB interface design, you can not use the computer switch wiring or extension cords. Package includes five DuPont line, you can link directly target board. Convenient and flexible. Transmission speed bps easily qualified, definitely more than PL. Borrow computer USB power supply, 3.3V and 5V power output can be provided directly to the user’s target board. Note: RXD TXD Some devices mark is not standard, even if not directly, please cross-connect. Powered by Turbo Lister

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components.   CNB053 - Set of 10 Pcs of New Original ULN IC (7 Darlington Pair) for DIY   Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Clear Any Doubts "BEFORE" Buying any products form us.     Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components.                                                                 For more assistance call: +91-, "DISCLAIMER: The Seller DSR rating shown above is for representation purpose only, Please check our feedback profile to know my current DSR ratings " Any Octroi or other local taxes if applicable will be paid by buyer only. .in Toll free Helpline: Powered by Turbo Lister

 Intel i7-3770 Quad Core processor 3.4GHZ(3rd Gen)+ Asus P8Q77-M MotherBoard+8GB Ram DDR3 1years Warranty by Company. Note: its OEM New MotherBoard, it will come with Back panel, No Box pack,No Driver CD, it will come in Different Box, 100% Genuine and working motherboard kit, Download its driver from following site: https://www.asus.com/Motherboards/P8Q77M/HelpDesk_Download/ Asus P8Q77-M MotherBoard Specification. CPU Intel® Socket 1155 for 3 rd /2 nd Generation Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron® Processors Supports Intel® 22 nm CPU Supports Intel® 32 nm CPU Supports Intel® Turbo Boost Technology 2.0 * The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. Chipset Intel® Q77 Memory 4 x DIMM, Max. 32GB, DDR3 1600/1333/1066 MHz Non-ECC, Un-buffered Memory Dual Channel Memory Architecture Graphic Integrated Graphics Processor Multi-VGA output support: DVI/RGB/DisplayPort ports - Supports DVI with max. resolution 1920 x 1200 @ 60 Hz - Supports RGB with max. resolution 1920 x 1200 @ 60 Hz - Supports DisplayPort with max. resolution 2560 x 1600 @ 60 Hz Maximum shared memory of 1748 MB Expansion Slots 1 x PCIe 3.0/2.0 x16 * 1 1 x PCIe x4 2 x PCI Storage Intel® Q77 chipset: 4 x SATA 3Gb/s port(s), blue 2 x SATA 6Gb/s port(s), gray Support Raid 0, 1, 5, 10 Supports Intel® Smart Response Technology, Intel® Rapid Start Technology, Intel® Smart Connect Technology * 2 LAN Intel® 82579LM, 1 x Gigabit LAN Controller(s) Audio VIA VT1708S 8-Channel High Definition Audio CODEC - Supports: Jack-detection, Multi-streaming, Anti-pop Function USB Ports Built-in Controller: 4 x USB 3.1 Gen 1 port(s) (2 at back panel,, 2 at mid-board) Built-in Controller: 10 x USB 2.0 port(s) (4 at back panel,, 6 at mid-board) Special Features ASUS EPU: - EPU GPU Boost ASUS Exclusive Features: - MemOK! - AI Suite II - Ai Charger - Anti-Surge - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface - USB 3.0 Boost ASUS Quiet Thermal Solution: - ASUS Fan Xpert - ASUS Q-Fan 2 ASUS EZ DIY: - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 - ASUS MyLogo 3 TPM IC Onboard Back I/O Ports 1 x PS/2 keyboard (purple) 1 x PS/2 mouse (green) 1 x DVI-D 1 x D-Sub 1 x DisplayPort 1 x LAN (RJ45) port(s) 2 x USB 3.1 Gen 1 4 x USB 2.0 3 x Audio jack(s) Internal I/O Ports 1 x USB 3.1 Gen 1 connector(s) support(s) additional 2 USB 3.1 Gen 1 port(s) 3 x USB 2.0 connector(s) support(s) additional 6 USB 2.0 port(s) 1 x COM port(s) connector(s) 2 x SATA 6Gb/s connector(s) 4 x SATA 3Gb/s connector(s) 1 x CPU Fan connector(s) 2 x Chassis Fan connector(s) 1 x S/PDIF out header(s) 1 x 24-pin EATX Power connector(s) 1 x 8-pin ATX 12V Power connector(s) 1 x parallel port connector(s) 1 x Front panel connector(s) (2 x 5 -pin) 1 x Front panel audio connector(s) (AAFP) 1 x Internal speaker connector(s) 1 x Chassis Intrusion connector(s) Accessories User's manual I/O Shield 2 x SATA 6Gb/s cable(s) BIOS 128 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.7, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree BIOS 3 Manageability WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE Support Disc Drivers ASUS Utilities ASUS Update Anti-virus software (OEM version) Form Factor uATX Form Factor 9.6 inch x 9 inch (24.4 cm x 22.87 cm) Processor i7 3770 SPECIFICATIONS Essentials Status Launched Launch Date Q2'12 Processor Number i7-3770 # of Cores 4 # of Threads 8 Clock Speed 3.4 GHz Max Turbo Frequency 3.9 GHz Intel® Smart Cache 8 MB DMI 5 GT/s Instruction Set 64-bit Instruction Set Extensions SSE4.1/4.2, AVX Embedded Options Available Yes Lithography 22 nm Max TDP 77 W Thermal Solution Specification 2011D Memory Specifications Max Memory Size (dependent on memory type) 32 GB Memory Types DDR3-1333/1600 # of Memory Channels 2 Max Memory Bandwidth 25.6 GB/s ECC Memory Supported ‡ No Graphics Specifications Processor Graphics ‡ Intel® HD Graphics 4000 Graphics Base Frequency 650 MHz Graphics Max Dynamic Frequency 1.15 GHz Intel® Quick Sync Video Yes Intel® InTru™ 3D Technology Yes Intel® Insider™ Yes Intel® Wireless Display Yes Intel® Flexible Display Interface (Intel® FDI) Yes Intel® Clear Video HD Technology Yes # of Displays Supported ‡ 3 Expansion Options PCI Express Revision 3.0 PCI Express Configurations ‡ up to 1x16, 2x8, 1x8 & 2x4 Package Specifications Max CPU Configuration 1 T CASE 67.4°C Package Size 37.5mm x 37.5mm Sockets Supported FCLGA1155 Low Halogen Options Available See MDDS Advanced Technologies Intel® Turbo Boost Technology ‡ 2.0 Intel® vPro Technology ‡ Yes Intel® Hyper-Threading Technology ‡ Yes Intel® Virtualization Technology (VT-x) ‡ Yes Intel® Virtualization Technology for Directed I/O (VT-d) ‡ Yes Intel® VT-x with Extended Page Tables (EPT) ‡ Yes Intel® TSX-NI No Intel® 64 ‡ Yes Idle States Yes Enhanced Intel SpeedStep® Technology Yes Thermal Monitoring Technologies Yes Intel® Identity Protection Technology ‡ Yes Intel® Data Protection Technology AES New Instructions Yes Secure Key Yes Intel® Platform Protection Technology Trusted Execution Technology ‡ Yes Execute Disable Bit ‡ Yes Anti-Theft Technology Yes (4gb+4gb)8GB DDR3 Ram Branded Transcend/Kingston/Samsung/Hynix or single ram of 8GB DDR3 as per Buyer Confirmation. Processor Fan, Sata Cable and MotherBoard Back Panel come with this Kit. 100% Support to every buyer

Product Description This can 2nd version of the customized arduino-compatible UNO R3 board, fully compatible with the arduino official version, but replaced some expensive parts and more extra pins lead out. Cost down but maybe better performance. Main customized features: Replace the expensive 16u2 USB-TTL IC to CH340 IC, cost nearly half, and can avoid the 16u2 driver compatibility problem which found on some win7/win8 OS. Replace the main IC atmega 328 PTH to atmega SMD QFP with arduino uno bootloader. Reserved extra male pins holes, so both female and male pins available on board, with some extra useful pins. Reserved another 3×4 pin holes, next to ISCP, pins includes: TX, RX, VCC, GND, IIC-SCL, IIC-SDA, power pins All the rest features are kept the same as the official version. Documentation: CH340 Driver can find on this page. Powered by Turbo Lister

Asus P8Q77-M Motherboard LGA 1155 Socket, support 2nd and 3rd Gen Processor Note: 1Year Warranty, its OEM MotherBoard, it will come with Back panel, No Box pack,No Driver CD, it will come in Different Box, 100% Genuine and working motherboard, Download its driver from following site: https://www.asus.com/Motherboards/P8Q77M/HelpDesk_Download/ CPU Intel® Socket 1155 for 3 rd /2 nd Generation Core™ i7/Core™ i5/Core™ i3/Pentium®/Celeron® Processors Supports Intel® 22 nm CPU Supports Intel® 32 nm CPU Supports Intel® Turbo Boost Technology 2.0 * The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. Chipset Intel® Q77 Memory 4 x DIMM, Max. 32GB, DDR3 1600/1333/1066 MHz Non-ECC, Un-buffered Memory Dual Channel Memory Architecture Graphic Integrated Graphics Processor Multi-VGA output support: DVI/RGB/DisplayPort ports - Supports DVI with max. resolution 1920 x 1200 @ 60 Hz - Supports RGB with max. resolution 1920 x 1200 @ 60 Hz - Supports DisplayPort with max. resolution 2560 x 1600 @ 60 Hz Maximum shared memory of 1748 MB Expansion Slots 1 x PCIe 3.0/2.0 x16 * 1 1 x PCIe x4 2 x PCI Storage Intel® Q77 chipset: 4 x SATA 3Gb/s port(s), blue 2 x SATA 6Gb/s port(s), gray Support Raid 0, 1, 5, 10 Supports Intel® Smart Response Technology, Intel® Rapid Start Technology, Intel® Smart Connect Technology * 2 LAN Intel® 82579LM, 1 x Gigabit LAN Controller(s) Audio VIA VT1708S 8-Channel High Definition Audio CODEC - Supports: Jack-detection, Multi-streaming, Anti-pop Function USB Ports Built-in Controller: 2 x USB 3.0 and Gen 2 at back panel 2.0 Built-in Controller: 10 x USB 2.0 port(s) (4 at back panel,, 6 at mid-board) Special Features ASUS EPU: - EPU GPU Boost ASUS Exclusive Features: - MemOK! - AI Suite II - Ai Charger - Anti-Surge - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface - USB 3.0 Boost ASUS Quiet Thermal Solution: - ASUS Fan Xpert - ASUS Q-Fan 2 ASUS EZ DIY: - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 - ASUS MyLogo 3 TPM IC Onboard Back I/O Ports 1 x PS/2 keyboard (purple) 1 x PS/2 mouse (green) 1 x DVI-D 1 x D-Sub 1 x DisplayPort 1 x LAN (RJ45) port(s) 2 x USB 3.1 Gen 1 4 x USB 2.0 3 x Audio jack(s) Internal I/O Ports 1 x USB 3.1 Gen 1 connector(s) support(s) additional 2 USB 3.1 Gen 1 port(s) 3 x USB 2.0 connector(s) support(s) additional 6 USB 2.0 port(s) 1 x COM port(s) connector(s) 2 x SATA 6Gb/s connector(s) 4 x SATA 3Gb/s connector(s) 1 x CPU Fan connector(s) 2 x Chassis Fan connector(s) 1 x S/PDIF out header(s) 1 x 24-pin EATX Power connector(s) 1 x 8-pin ATX 12V Power connector(s) 1 x parallel port connector(s) 1 x Front panel connector(s) (2 x 5 -pin) 1 x Front panel audio connector(s) (AAFP) 1 x Internal speaker connector(s) 1 x Chassis Intrusion connector(s) Accessories User's manual I/O Shield 2 x SATA 6Gb/s cable(s) BIOS 128 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.7, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree BIOS 3 Manageability WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE Support Disc Drivers ASUS Utilities ASUS Update Anti-virus software (OEM version) Form Factor uATX Form Factor 9.6 inch x 9 inch (24.4 cm x 22.87 cm)

Product Description Features: Ultra-thin ultra-small (mm) Good harmonics too easy to FCC / CE certification The penetration ability (measured through 8 floors) Using the latest version of the U.S. SI IC, stable performance Specification: Frequency range: M Sensitivity up to-121dBm Maximum output power: 20dBm Ddata transfer rate:kbps FSK, GFSK and OOK modulation power supply: V Ultra-low-consumption shutdown mode Digital received signal strength indication (RSSI) Wake time Automatic matching and two-way antenna switch control Configurable packet structure Preamble detection 64-byte send and receive data register (FIFO) Low power detection 8-bit ADC and temperature sensor Operating temperature range: - ° C Integrated voltage regulator Frequency hopping Power-on reset function Built-in lens adjustment Application: Remote Control; Remote meter reading; Home security alarm and remote keyless entry; Industrial Control; Telemetry Home Automation; Personal data records; Toy Control; Sensor networks; Tire pressure monitoring; Health Monitoring; Wireless PC peripherals; Tag readers Powered by Turbo Lister

Product Description This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target. This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working. This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector. One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. Powered by Turbo Lister

Product Description This is a wifi solution based on IC ESP from Espressif, very price competitive wifi module, and also great function. Bring your project to the internet of things easily! Features: Very competitive price AP, STA, AP+STA modes available. Very simple AT commands, easy to use. internal LWIP interface. Only four pins interface, VCC-3V3, GND, TXD and RXD. Current firmware V091 for all stock, new reserved reset and CH_PD (for updating) pins available, you can refresh the firmware now. All using new ESPex new chip, old chip is not available anymore. Pin description Pin High Status Low Status Note VCC, GND Use standalone power source, or large capacitor, all power of this module from external TXD, RXD The serial port RST - restart CH_PD Flash boot and Update Mode - chip enable, so always connect to high status with VCC GPIO0 - Update mode GPIO2 - - GPIO 15 (when avaialble) NC Flash boot Mode Only for a few version, Wi07-3 GPIO 12 GPIO 13 GPIO 14 GPIO 16 Hardware RST No need any pull-up AT commands §   Baud rate: (from v0.90, v0.80 and older: ) §   The AT part of the command can be written large or small, however, the following command must always be written large §   Make sure that before, after and within the command no spaces (space) occur General AT commands AT command Description Parameter Example AT Test command, are always "OK" back AT AT + RST Reset of the module, the module's boot messages followed by  ready  back AT + RST AT + GMR Querying the Firmware Version AT + GMR WiFi AT commands AT command Description Parameter Example AT + CWMODE =  Setting the WiFi mode  1) Station 1 =  2 = Access Point  3 = Both AT + CWMODE = 1 AT + CWMODE? Query WiFi mode AT + CWMODE? AT + CWMODE =? Query of possible settings for WiFi mode AT + CWMODE =? AT + CIPMUX = Using multiple connections 0 = single compound  1 = Multiple connections AT + CIPMUX = 1 AT + CIPMODE = Setting the data mode 0 = transparent  1 = Data AT + CIPMODE = 1 AT + CIPMODE? Output of the data set mode AT + CIPMODE? WiFi commands (Station / client) AT command Description Parameter Example AT + CWJAP =, Connecting to WiFi network ssid "SSID"  pass "password" AT + CWJAP = "makerday", "M4k3rd4y" AT + CWJAP? Output of the currently connected WiFi network AT + CWJAP? AT + CWLAP Output of available APs  2) AT + CWLAP AT + CWQAP Closes the connection to an access point AT + CWQAP AT + CIFSR Issue its own IP address AT + CIFSR WiFi commands (Access Point) AT command Description Parameter Example AT + CWSAP =, [,,] Set the access point parameters  3) ssid "SSID"  pass "password"  chan "channel"  enc "Encryption"  (0 = Open  1 = WEP  WPA_PSK 2 =  3 = WPA2_PSK  4 = WPA_WPA2_PSK) AT + CWSAP = "makerday", "M4k3rd4y" 5.3 AT + CWSAP? Output the current settings for the AP AT + CWSAP? AT + CWLIF Lists stations connected IPs 4) AT + CWLIF WiFi commands (IP Client) AT command Description Parameter Example AT + CIPSTATUS Output status of the IP connection (s) AT + CIPSTATUS AT + CIPSTART =,, Creating an IP connection with AT + CIPMUX = 0 type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND = Sending data over a single compound  5) len: Data length AT + CIPSEND = AT + CIPCLOSE Close a single TCP or UDP connection AT + CIPCLOSE AT + CIPSTART =,,, Creating an IP connection with AT + CIPMUX = 1 id: 0-4  type: "TCP" or "UDP"  address "IP address"  port: TCP / UDP port AT + CIPSTART = "TCP", " AT + CIPSEND =, Send data via merhere compounds 6) id: 0-4  len: Data length AT + CIPSEND = AT + CIPCLOSE = Close one of several TCP or UDP connection id: 0-4 AT + CIPCLOSE = 1 WiFi commands (IP server) AT command Description Parameter Example AT + CIPSERVER = 1 [,] Starts the TCP server port: TCP port AT + CIPSERVER = AT + CIPSERVER = 0 Terminates the TCP server AT + CIPSERVER = 0 AT + CIPSTO = Sets timeout for TCP server timeout = s AT + CIPSTO = 180 AT + CIPSTO? Specifies timeout of TCP server AT + CIPSTO? If a TCP server is started, it can handle up to 5 simultaneous connections. Other compounds can be created, but only served when others are closed or terminated by timeout. The module incoming data directly with the prefix  + IPD  issued: + IPD,   OK   + IPD, 0.6: ON   OK The output is divided as follows: + IPD,,, It is  id  the ID of the compound (0-5),  len  the length of the resulting data packet and  data  contains the data received from the client. In the above example as first sends compound 1 the value   and then connect the string 0  ON     Powered by Turbo Lister

USB To RS232 TTL BreadBoard with free Hookup Wire (Jumper Wire) - 1 Meter Description: Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable. Comes with free single core copper wire (jumper wire) for experiment purpose. Features: Quick circuit testing and mock-up 840 Contact Points Suitable for most IC's, Standard 0.1" Spacing Positive and Negative Power Rails on Top and Bottom 128 Group of 5 connected terminals 8 Bus of 25 connected terminals Breadboard Size: 175mm x 67mm x 8mm *Image shown is actual.   *Courier companies are choosed based on product weight, distance, etc. parameters. So, please don't force for specific courier company. Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company other vise we will choose Speed Post.  For more assistance call: +- or E-mail:     "DISCLAIMER: The Seller DSR rating shown above is for representation purpose only, Please check our feedback profile to know my current DSR ratings " Any Octroi or other local taxes if applicable will be paid by buyer only. .in Toll free Helpline:     Powered by Turbo Lister