Breadboard power module mb

Product Contents 1. Enhanced Breadboard Power Supply (Input Voltage 6.5V to 12V, Output Violate 3.3V or 5.0V via switches) 2. MB-102 Color breadboard 3. 65 Root Breadboard Cables Product Features A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. Parts will not be damaged so they will be available for re-use afterwards. 100% Brand New & High Quality! Reusable for fast build a prototype of an electronic circuit Each unit will accept transistors, diodes, LEDS, resistors, capacitors and virtually all types of components No soldering required Can modify or revise the circuits easily Similar prototyping printed circuit boards An invaluable tool for experimenting with circuit designs whether Superior Quality, Free Shipping

A 3.3V and 5V Breadboard Power Supply Module with series diode, polarity reversal protection. The module can take 6.5V to 12V input and can produce 3.3V and +5V. Can also output 5V on USB connector and can also take input through USB connector. Features: Breadboard power supply module, with 5 V, 3.3 V output voltages Apply to MB102 Standard breadboard Input voltage: V (DC) or 5V USB power supply Output voltage: 3.3V and 5V can switch over Maximum output current: Input voltage ON/OFF switch Independent control of upper and Lower Bread Board Power Rails. Can switch over to 0 V, 3.3 V, 5 V using jumpers on any rail. On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use. Connectors: 1x Barrel 5mm Connector (center +ve) for Input Power 1x USB connector for 5V input or 5V output 4x 2Pin Headers pointing downward for 3.3V or 5V output 1x 2×4 Header for 3.3V and 5V output 2x 1×4 selection jumper for 3.3V/OFF/5V Please note:  This item only comes with a Power Supply Module, Breadboard is not included Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

840 Point Normal Bread Board Power Supply Module  Good Quality @ Lowest Price Breadboard power supply module for normal 840 Point GL12 Breadboards as shown

MB 102 power supply module 3.3V & 5V for solderless breadboard Ideal choice for solderless prototyping with arduino raspi AVR PIC Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description: ·       Input voltage: V (DC) or USB power supply ·       Output voltage: 3.3V/5V switch ·       Maximum output current: ·       two way independent control, can be switched over to 0 V,3.3 V,5 V ·       On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead usage ·       Breadboard power supply module, compatible with 5 V,3.3 V   Specification Size:                          mm(max) Net weight:            12 g Package weight: 22 g PCB Color:                Black   Package Include: ·       1 x   MB102 breadboard power supply   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

MB 102 power supply module 3.3V & 5V for solderless breadboard Ideal choice for solderless prototyping with arduino raspi AVR PIC   Product Description: ·       Input voltage: V (DC) or USB power supply ·       Output voltage: 3.3V/5V switch ·       Maximum output current: ·       two way independent control, can be switched over to 0 V,3.3 V,5 V ·       On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead usage ·       Breadboard power supply module, compatible with 5 V,3.3 V   Specification Size:                          mm(max) Net weight:           12 g Package weight: 22 g PCB Color:              Black   Package Include: ·       1 x  MB102 breadboard power supply   Shipping Details:    we prefer Indian speed post   Feedback: ·        In case you find any problem

Breadboard Power Supply Module 3.3V 5V MB102 Solderless Bread Board DIY    Features: Brand new & high quality Breadboard power supply module, compatible with 5 V, 3.3 V Apply to MB102 breadboard Input voltage: V (DC) or USB power supply Output voltage: 3.3V/5V can switch over Maximum output current: Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use. Please note  this item only a Power Supply Module, Breadboard is not included   Package included: 1 x power module

Specifications: Breadboard power supply module, with 5 V, 3.3 V output voltages Apply to MB102 Standard breadboard Input voltage: V (DC) or 5V USB power supply Output voltage: 3.3V and 5V can switch over Maximum output current: Input voltage ON/OFF switch Independent control of upper and Lower Bread Board Power Rails. Can switch over to 0 V, 3.3 V, 5 V using jumpers on any rail On-board Two sets of 3.3V, 5V DC output pins, convenient external lead use Package contents: 1 x  MB102  Bread Board  3.3V & 5V  Power Supply Module

1 Piece MB102 Breadboard Power Supply Order more than one piece to save shipping cost. You can contact us at + for any question or concern. Device Details Description: Two Outputs: 5v & 3.3v Input: V DC or USB Power Switchable between 0V, 3.3V & 5V Two sets of 3.3V & 5V header pins on board. On / Off Switch Package Include 1 Piece MB102 Breadboard Power Supply About Us We are a small company based

Description: Two Outputs: 5v & 3.3v Input: V DC or USB Power Switchable between 0V, 3.3V & 5V Two sets of 3.3V & 5V header pins on board. On / Off Switch Package Include 1 Piece MB102 Breadboard Power Supply SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Description This is a breakout board for Freescale’s MMAL three-axis analog MEMS accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices. Two selectable measuring ranges (±1.5g, ±6g) Breadboard friendly - 0.1" pitch header Low current consumption: 400 µA Sleep mode: 3 µA This breadboard friendly board breaks out every pin of the MMAL to a 9-pin, 0.1" pitch header. The sensor works on power between 2.2 and 3.6VDC (3.3V optimal), and typically consumes just 400µA of current. All three axes have their own analog output. Technical parameters: Voltage Range- DV Static Current- Output Level- High 3.3 V /Low 0V Working Temperature- -  deg   Package Includes: 1 Piece new  MMA  Accellerometer Module 3 Axis  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This is a breakout board for Freescale’s MMA7361L three-axis analog MEMS accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices. Two selectable measuring ranges (±1.5g, ±6g) Breadboard friendly - 0.1" pitch header Low current consumption: 400 µA Sleep mode: 3 µA This breadboard friendly board breaks out every pin of the MMA7361L to a 9-pin, 0.1" pitch header. The sensor works on power between 2.2 and 3.6VDC (3.3V optimal), and typically consumes just 400µA of current. All three axes have their own analog output. Technical parameters: Voltage Range- 4.5-20DV Static Current- Output Level- High 3.3 V /Low 0V Working Temperature- -15-+70  deg   Package Includes: 1 Piece new  MMA7361  Accellerometer Module 3 Axis  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

SUN BLADE 6000 sun c6000 chasis with 2 blades Dual Power Supply. SPECIFICATION AND PART NO: SUN BLADE 6000 with processors 8 blades are x6270 - blade mb part no: 501-7918-09 / each blade have processors with 8gb ddr3 memory[4+4]/ no hdd ----> p/no: 371-4288 Sun 371-2658 X6250 Blade RAID Card 5 Expansion Module 2 blades are x6320 - blade mb 541-3842-02 4gb ddr2 memory -3714345/540-7708-01*8no+511-1151-01*8no Sun 375-3386 4GB PCIe Dual Express Module Host Adapter Emulex*3no 594-4585 Sun 10-port GbE Pass-Thru Network Express (NEM) Sun 300-2190 Input Power Supply SB6000*2nos Mobile No. 9840269314, Email ID: anand_1117@hotmail.com.

Website: www.signwave.in Mobile: 080-41530751 Hi All We have DELL Servers for rent & sales Power edge R610 server specification: Processor: Processor Intel Xeon processor 5500 and 5600 series Six-core Intel Xeon Quad-core Intel Xeon Operating System Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Microsoft Windows Small Business Server 2008 Microsoft Windows Server 2008 SP2, x86/x64 (x64 includes Hyper-V) Microsoft Windows Server 2008 R2 SP1, x64 (includes Hyper-V v2) Microsoft Windows HPC Server 2008 R2 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Virtualization options: Citrix XenServer Microsoft Hyper-V through Microsoft Windows Server 2008 VMware vSphere ESX and ESXi Red Hat Enterprise Virtualization Memory2 Up to 192GB (12 DIMM slots) 1GB/2GB/4GB/8GB/16GB DDR3 up to 1333MT/s Drive Bays Hot-Swap options available: Up to six 2.5 SAS, SATA or SSD drives Chassis R610 Rack Height: 4.26cm (1.68) Width: 48.24cm (18.99) (includes rack latches) Depth: 77.2cm (30.39) (includes PSU handles and bezel) Weight (maximum config): 17.69Kgs (39lbs) Fans Standard redundant cooling Rack Support Sliding ReadyRails for 4-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support full extension of the system out of the rack to allow serviceability of key internal components Support optional cable management arm (CMA) except on Dell 4200 & 2400 racks and 3rd party racks that are less than 1m in depth Rail depth without the CMA: 798 mm (with outer CMA brackets attached), 768 mm (with outer CMA brackets removed) Rail depth with the CMA: 887 mm Square-hole rack adjustment range: 692-756 mm Round-hole rack adjustment range: 678-749 mm Static ReadyRails for 4-post & 2-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support tooled installation in 19 CEA-310-E compliant threaded hole 4-post and 2-post racks Rail depth: 608 mm Square-hole rack adjustment range: 588-828 mm Round-hole rack adjustment range: 574-821 mm Threaded-hole rack adjustment range: 592-846 mm 1U/2U Rail Attachment Brackets Availability Hot-plug hard drives, hot-plug redundant power, redundant cooling, ECC memory, Single Device Data Correction (SDDC), supports memory demand, patrol scrubbing and high availability failover cluster Power Two hot plug high efficient 502w PSU (Energy Smart) or Two hot-plug 717W PSUs (High Output) UPS (Uninterruptible Power Supplies): 1000W-5600W 2700W-5600W High Efficiency Online Extended Battery Module (EBM) Network Management Card Thermal Operation Continuous Operation: 10C to 35C, 10% to 80% relative humidity (RH). 10% of annual operating hours: 5C to 40C, 5% to 85%RH. 1% of annual operating hours: -5C to 45C, 5% to 90%RH. For in-depth detail, check your user manual. RAID Controllers Internal: PERC H200 (6Gb/s) PERC H700 (6Gb/s) with 512MB Non-Volatile cache PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache SAS 6/iR PERC 6/i with 256MB battery-backed cache External: PERC H800 (6Gb/s) with 512MB Non-Volatile cache PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache PERC 6/E with 256MB or 512MB of battery-backed cache External HBAs (non-RAID): 6Gbps SAS HBA SAS 5/E HBA LSI2032 PCIe SCSI HBA Chipset Intel 5520 (Tylersberg) Storage SAS, Near-line SAS, SSD and SATA 2.5" SAS (15K RPM): 73GB3, 146GB3 2.5" SAS (10k RPM):146GB3, 300GB3,600GB3 2.5" Enterprise SSD: 50GB3, 100GB3 2.5" SATA (7.2K):80GB3, 500GB3 2.5" Near-Line SAS (7.2k):500GB3 Maximun Internal Storage: 3.6 TB with six 600 GB SAS drives Slots 2 PCIe G2 slots + 1 storage slot: Two x8 PCIe Gen2 slots One x4 PCIe Gen1 slot dedicated for the integrated storage controller card Network Controller Two dual port embedded Broadcom NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing. Optional 1GBe and 10GBe add-in NICs Management Dell OpenManage Lifecycle Controller iDRAC6 Enterprise (Optional) vFlash (Optional) Embedded Hypervisor (Optional) Citrix XenServer Microsoft Windows Server 2008, with Hyper-V VMware vSphere 4.1 (including VMware ESX 4.1 or VMware ESXi 4.1) Communications Optional add-in NICs: Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement) Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4 Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x8 Intel 10GBase-T Copper Single Port NIC, PCI-E x8 Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8 Intel Gigabit ET Dual Port Server Adapter -Intel Gigabit ET Quad Port Server Adapter Broadcom 10GbE NIC, Broadcom Dual Port 10GbE SFP+ Broadcom BMC57710 10Base-T Cooper Single Port NIC, PCI-E x8 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4 Broadcom NetXtreme II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload Brocade CNA Dual-port adapter Emulex CNA iSCSI HBA stand up adapter OCE10102-IX-D Optional add in HBAs: Qlogic QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA Qlogic QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA Qlogic QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4 Qlogic QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4 Emulex LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Emulex LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Brocade FC4 and 8 GB HBAs Video Card Integrated Matrox G200, 8 MB shared video memory Environmental Operating Conditions Acoustics: Typically configured 2.5 chassis in 23 2 C ambient Idle: LwA-UL = 5.3 bels, LpAm = 35 dBA For more details, contact us: Mobile: 080-41530751 Website: www.signwave.in e-mail: dinesh@signwave.in Signwave Technologies # 32,2nd main, 7th cross,Muniyappa layout, Garebhavi palya, Bangalore-560 068.INDIA

Website: www.signwave.in Mobile: 080-41530751 Hi All We have DELL Servers for rent & sales Power edge R610 server specification: Processor: Processor Intel Xeon processor 5500 and 5600 series Six-core Intel Xeon Quad-core Intel Xeon Operating System Microsoft Windows Server 2012 Microsoft Windows Small Business Server 2011 Microsoft Windows Small Business Server 2008 Microsoft Windows Server 2008 SP2, x86/x64 (x64 includes Hyper-V) Microsoft Windows Server 2008 R2 SP1, x64 (includes Hyper-V v2) Microsoft Windows HPC Server 2008 R2 Novell SUSE Linux Enterprise Server Red Hat Enterprise Linux Virtualization options: Citrix XenServer Microsoft Hyper-V through Microsoft Windows Server 2008 VMware vSphere ESX and ESXi Red Hat Enterprise Virtualization Memory2 Up to 192GB (12 DIMM slots) 1GB/2GB/4GB/8GB/16GB DDR3 up to 1333MT/s Drive Bays Hot-Swap options available: Up to six 2.5 SAS, SATA or SSD drives Chassis R610 Rack Height: 4.26cm (1.68) Width: 48.24cm (18.99) (includes rack latches) Depth: 77.2cm (30.39) (includes PSU handles and bezel) Weight (maximum config): 17.69Kgs (39lbs) Fans Standard redundant cooling Rack Support Sliding ReadyRails for 4-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support full extension of the system out of the rack to allow serviceability of key internal components Support optional cable management arm (CMA) except on Dell 4200 & 2400 racks and 3rd party racks that are less than 1m in depth Rail depth without the CMA: 798 mm (with outer CMA brackets attached), 768 mm (with outer CMA brackets removed) Rail depth with the CMA: 887 mm Square-hole rack adjustment range: 692-756 mm Round-hole rack adjustment range: 678-749 mm Static ReadyRails for 4-post & 2-post Racks: Support tool-less installation in 19 CEA-310-E compliant square or round hole 4-post racks including all Dell 42xx & 24xx racks Support tooled installation in 19 CEA-310-E compliant threaded hole 4-post and 2-post racks Rail depth: 608 mm Square-hole rack adjustment range: 588-828 mm Round-hole rack adjustment range: 574-821 mm Threaded-hole rack adjustment range: 592-846 mm 1U/2U Rail Attachment Brackets Availability Hot-plug hard drives, hot-plug redundant power, redundant cooling, ECC memory, Single Device Data Correction (SDDC), supports memory demand, patrol scrubbing and high availability failover cluster Power Two hot plug high efficient 502w PSU (Energy Smart) or Two hot-plug 717W PSUs (High Output) UPS (Uninterruptible Power Supplies): 1000W-5600W 2700W-5600W High Efficiency Online Extended Battery Module (EBM) Network Management Card Thermal Operation Continuous Operation: 10C to 35C, 10% to 80% relative humidity (RH). 10% of annual operating hours: 5C to 40C, 5% to 85%RH. 1% of annual operating hours: -5C to 45C, 5% to 90%RH. For in-depth detail, check your user manual. RAID Controllers Internal: PERC H200 (6Gb/s) PERC H700 (6Gb/s) with 512MB Non-Volatile cache PERC H700 (6Gb/s) with 512MB battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache SAS 6/iR PERC 6/i with 256MB battery-backed cache External: PERC H800 (6Gb/s) with 512MB Non-Volatile cache PERC H800 (6Gb/s) with 512MB of battery-backed cache; 512MB, 1G Non-Volatile battery-backed cache PERC 6/E with 256MB or 512MB of battery-backed cache External HBAs (non-RAID): 6Gbps SAS HBA SAS 5/E HBA LSI2032 PCIe SCSI HBA Chipset Intel 5520 (Tylersberg) Storage SAS, Near-line SAS, SSD and SATA 2.5" SAS (15K RPM): 73GB3, 146GB3 2.5" SAS (10k RPM):146GB3, 300GB3,600GB3 2.5" Enterprise SSD: 50GB3, 100GB3 2.5" SATA (7.2K):80GB3, 500GB3 2.5" Near-Line SAS (7.2k):500GB3 Maximun Internal Storage: 3.6 TB with six 600 GB SAS drives Slots 2 PCIe G2 slots + 1 storage slot: Two x8 PCIe Gen2 slots One x4 PCIe Gen1 slot dedicated for the integrated storage controller card Network Controller Two dual port embedded Broadcom NetXtreme IITM 5709c Gigabit Ethernet NIC with failover and load balancing. Optional 1GBe and 10GBe add-in NICs Management Dell OpenManage Lifecycle Controller iDRAC6 Enterprise (Optional) vFlash (Optional) Embedded Hypervisor (Optional) Citrix XenServer Microsoft Windows Server 2008, with Hyper-V VMware vSphere 4.1 (including VMware ESX 4.1 or VMware ESXi 4.1) Communications Optional add-in NICs: Dual Port 10GB Enhanced Intel Ethernet Server Adapter X520-DA2 (FcoE Ready for Future Enablement) Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4 Intel PRO/1000 VT Quad Port Server Adapter, Gigabit, Copper, PCI-E x8 Intel 10GBase-T Copper Single Port NIC, PCI-E x8 Intel Single Port Server Adapter, 10Gigabit, SR Optical, PCI-E x8 Intel Gigabit ET Dual Port Server Adapter -Intel Gigabit ET Quad Port Server Adapter Broadcom 10GbE NIC, Broadcom Dual Port 10GbE SFP+ Broadcom BMC57710 10Base-T Cooper Single Port NIC, PCI-E x8 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE and iSCSI Offload, PCI-E x4 Broadcom BMC5709C IPV6 Gigabit Copper Dual Port NIC with TOE, PCI-E x4 Broadcom NetXtreme II 57711 Dual Port Direct Attach 10Gb Ethernet PCI-Express Network Interface Card with TOE and iSCSI Offload Brocade CNA Dual-port adapter Emulex CNA iSCSI HBA stand up adapter OCE10102-IX-D Optional add in HBAs: Qlogic QLE 2462 FC4 Dual Port 4 Gbps Fiber Channel HBA Qlogic QLE 2460 FC4 Single Port 4 Gbps Fiber Channel HBA Qlogic QLE2562 FC8 Dual-channel HBA, PCI-E Gen 2 x4 Qlogic QLE2560 FC8 Single-channel HBA, PCI-E Gen 2 x4 Emulex LPe-1150 FC4 Single Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-11002 FC4 Dual Port 4 Gbps Fiber Channel HBA, PCI-E x4 Emulex LPe-12000, FC8 Single Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Emulex LPe-12002, FC8 Dual Port 4 Gbps Fiber Channel HBA, PCI-E Gen 2 x4 Brocade FC4 and 8 GB HBAs Video Card Integrated Matrox G200, 8 MB shared video memory Environmental Operating Conditions Acoustics: Typically configured 2.5 chassis in 23 2 C ambient Idle: LwA-UL = 5.3 bels, LpAm = 35 dBA For more details, contact us: Mobile: 080-41530751 Website: www.signwave.in e-mail: dinesh@signwave.in Signwave Technologies # 303,4th main, Duo City layout, Basapura, Bengaluru-560 100.INDIA

The Power 720 offers a choice of a 4-core, 6-core, or 8-core configuration running at 3.6 GHz, available in a 4U rack-mount or a tower form factor. The POWER7+ processor chip in this server is a 64-bit, 4-core, 6-core, or 8-core module with 10 MB of L3 cache per core and 256 KB of L2 cache per core. Get IBM 8202-E4D P720 Server on rental from GlobalNettech Delhi. Contact us: GlobalNettech Office no: 080-25447708 Email address: enquiry@globalnettech.com, Product Page: https://globalnettech.com/server-rental/