Card board

http://poweradaptermall.com/dell-14r-15r-n5110-n4110-4120-3550-network-card-board-usb-board-p-20410.html Dell 14R 15R N5110 N4110 4120 3550 Network card board USB board Genuine Dell 14R 15R N5110 N4110 4120 3550 Network card board USB board Description: DELL Power Button Board Condition: tested working 100% Functional:Yes Warranty: 60 days Compatible models: Dell Inspiron 14R 15R N5110 N4110 4120 3550 laptop

Ethernet W Shield Network Expansion Board w/ Micro SD Card Slot for Arduino (Q022) Product Features:. The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino. The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. Requires an Arduino board (not included). Operating Voltage 5V (supplied from the Arduino Board) Product Features The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet) The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections Use the Ethernet library to write sketches which connect to the internet using the shield Requires an Arduino board (not included) Operating Voltage 5V (supplied from the Arduino Board) Ethernet Controller W with internal 16K buffer Connection Speed Mb Connection with Arduino on SPI port

Micro SD Storage Board adap Micro SD TF Card Memory Shield Module SPI Fr Arduino Description 1 Support Micro SD Card, Micro SDHC card (high-speed card)  2 The level conversion circuit board that can interface level is 5V or 3.3V  3 Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board  4 Communication interface is a standard SPI interface  5 4 M2 screw positioning holes for easy installation  6 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;  7 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply  8 Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal  9 Micro SD card connector: yes since the bomb deck for easy card insertion and removal  10 Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination  11 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin  V voltage regulator circuit: LDO regulator output is 3.3V level converter chip, Micro SD card supply  13 Level conversion circuit: Micro SD card into the direction of the signal is converted to 3.3V, MicroSD card interfaces to control the direction of the MISO signal is also converted into 3.3V, general AVR microcontroller system can read the signal;  14 Micro SD card connector: a self- bomb deck, easy card insertion.  15 Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination; Package Info 1Pc X Micro SD Storage Board  Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Description: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g   Package Included: 1PCS*Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Welcome to ask any question Mob- , Email Your feedback is important for us to grow our business on , so please  leave Positive feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino     Product information Features:   Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,  VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g Shipping content: 1x Micor SD TF Card Shield Expansion Board for Arduino/PIC/ATMEL

Description The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Features： Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination; Specification: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Power supply: 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface: Standard SPI interface Positioning holes: 4 M2 screw positioning holes Package included: 1 x  Mciro SD/TF Card Memory Shield Module

SAM3X8EA 32bit ARM Contex-M3 Due R3 Board Control  Arduino Due R3 AT91SAM3X8E   Description The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button. Features: 1. Microcontroller ：AT91SAM3X8E   2. Operating Voltage：3.3V  3. Input Voltage (recommended)：7-12V  4. Input Voltage (limits)：6-16V  5. Digital I/O Pins ：54 (of which 12 provide PWM output)  6. Analog Input Pins：12 7. Analog Outputs Pins：2 (DAC) 8. Total DC Output Current on all I/O lines ：130 mA 9. DC Current for 3.3V Pin：800 mA   10. DC Current for 5V Pin：800 mA  11. Flash Memory：512 KB all available for the user applications  12. SRAM：96 KB (two banks: 64KB and 32KB)   13. Clock Speed：84 MHz            Driver installation and usage procedure: ·                      Install  Arduino IDE ß  (click here) no extra driver needed for this card. ·                      Connect the board to computer, OS will auto detect ARDUINO DUE ·                      If the board is not auto detected, go to hardware device manager and choose update driver than choose advanced option “install from specific location” and point to the directory where your Arduino IDE is installed e.g. ”C:/program files/arduino-1.0.2/drivers” ·                      Launch Arduino IDE, select board as “arduino DUE” ·                      Select the com port OS created for the card(control panel  à  device manager) ·                      Open basics  à  blink sketch and upload. Package: 1 MCU BOARD  + 1 USB cable

Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-U2B The Apple/Adaptec AHA-U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles , and . This card has a standard 68-pin MicroD external interface, and one internal 68-pin interface. To ensure best compatibility, flash this board with the downloadable U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the U2, known as the U2B, lacks the problematic Adaptec "SpeedFlex" circuitry found on the commercial U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card. WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES SCSI,FIBER, COMPUTER RELATED CABLES SUN PRODUCTS EMC PRODUCTS STORAGES TAPE DRIVES, LIBRARIES CONTACT: SENTHILKUMAR

Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-U2B The Apple/Adaptec AHA-U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles , and . This card has a standard 68-pin MicroD external interface, and one internal 68-pin interface. To ensure best compatibility, flash this board with the downloadable U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the U2, known as the U2B, lacks the problematic Adaptec /"SpeedFlex/" circuitry found on the commercial U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card. WE ARE DEALING OLD SERVER, SPARE PARTS DESKTOPS,LAPTOPS& SERVICES SCSI,FIBER, COMPUTER RELATED CABLES SUN PRODUCTS EMC PRODUCTS STORAGES TAPE DRIVES, LIBRARIES CONTACT: EMAIL:

4 channel USB Relay Board with 36 Digital/Analog I/Os USB Data Acquisition Board    Welcome to the world of Computer Automation. This USB Relay Board - U96 is a perfect companion for all your computer automation projects. It is USB based card having 4 onboard relays for switching external devices and up to 36 digital & analogue I/Os that will help you to monitor various real world scenarios using switches & different kind of sensors to monitor many parameters like Temperature, Pressure, Light, Touch, PH etc. This card is not only good for controlling Relays but a perfect example for Data Acquisition applications. It appears as a USB CDC (Communications Device Class) device when connected to USB port of a computer. This creates a Virtual Serial (Com) Port, which allows easy communication with the card. Any programming language that supports serial communications (C, C#, C++, VB, VB.NET, Perl, Java etc) can be used to communicate with U96 very easily. Easy to use commands are available to communicate with U96 which handle various tasks like Switching On/Off of Relays, Controlling Digital Inputs & Outputs, Getting analog data etc. The controller provides 4 relay outputs to control various electrical devices. Apart from this, the card has up to 36 digital input & output pins. It has also got 15 Analog input pins. All pins will be individually configured as Digital Input or Digital output or Analog input automatically as per input command. Each Digital pin can support a TTL or Schmitt Trigger Input or a 3.3V output. Each Analog pin will convert analog voltage (Between 0 to 3V) or Higher (through voltage divider) into 12 bit resolution value. The output can be raw data or converted into voltage. The raw data be converted into required form using conversion formulas. Any kind of sensor whether it is providing digital output or analogue output can be interfaced with U96 and monitored with the help of computer. For more information please download U96 User Manual from our download section at http://iknowvations.in/downloads/. If you have any questions, you can contact our support team at support@iknowvations.in

Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI, SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-2940U2B The Apple/Adaptec AHA-2940U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles 58204, and 58256. This card has a standard 68-pin MicroD external interface and one internal 68-pin interface. To ensure the best compatibility, flash this board with the downloadable 2940U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the 2940U2, known as the U2B, lacks the problematic Adaptec "SpeedFlex" circuitry found on the commercial 2940U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card.

Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC Adaptec AHA-2940U2B Ultra2-LVD/SE PCI cards for MAC SPECIFICATIONS 32-bit PCI local bus Interface Protocol Bus master DMA: Host Bus Burst Data Rate: 133 MB/sec Maximum Data Transfer Rate: 80 MB/sec Peripheral Bus: 8-bit & 16-bit Ultra SCSI, 32-bit Ultra2 SCSI SCSI Synchronous Maximum Burst Rates: Ultra SCSI - up to 80 MB/sec in 16-bit mode and 20 MB/sec in 8-bit mode Device Protocol: SCSI-1, SCSI-2, SCSI-3, Ultra SCSI, Ultra2 SCSI and LVD Advanced SCSI Features: Multithreaded I/O (up to 255 tasks simultaneously) Scatter/gather Tagged command queuing Disconnect/Reconnect External Connector: 68-pin LVD Wide Ultra SCSI Internal Connectors: 68-pin High-Density LVD Wide Ultra SCSI Device Support: Up to 15 SCSI peripherals (internal or external) About the Apple/Adaptec AHA-2940U2B The Apple/Adaptec AHA-2940U2B is an Ultra2 LVD SCSI Single-Channel SCSI board. It is discussed in Apple TIL articles 58204, and 58256. This card has a standard 68-pin MicroD external interface, and one internal 68-pin interface. To ensure best compatibility, flash this board with the downloadable 2940U2B v1.2 Flash Utility available on the Apple website. Please check your board before you flash it. most likely it is already running the latest firmware. In the event you experience trouble with your board, running the flasher utility is a useful diagnostic procedure. Note that the Apple version of the 2940U2, known as the U2B, lacks the problematic Adaptec /"SpeedFlex/" circuitry found on the commercial 2940U2W version which was intended to make it possible to run narrow single-ended devices on a wide LVD card. In our opinion, SpeedFlex was a great idea that intermittently worked as advertised and caused more problems than it resolved. Apple recommends that you use only LVD devices on this card.

2 channel RS232 Relay & DAQ Board -iRS-2R Welcome to the world of Computer Automation. This RS232 Relay Board - iRS-2R is a perfect companion for all your computer automation projects. It is RS232 based card having 2 on board relays for switching external devices and up to 4 Digital Input/Output and  Analog channels. The Analog channels have 10 bit resolution for connecting many sensors to measure parameters like Temperature, Pressure, Humidity, Magnetic etc. It uses existing Com Port (you can choose the available one), which allows easy communication with the card. Any programming language that supports serial communications (C, C#, C++, VB, VB.NET, Perl, Java etc) can be used to communicate with iRS-2R very easily. Easy to use commands are available to communicate with iRS-2R for Switching On/Off of Relays and playing with Input/Output channels and Analog inputs. The revised ikantrol-R242 V 1.1 software (freely downloadable from our download section at http://iknowvations.in/downloads/) can be used to test & operate iRS-2R card. For more technical information, please download  iRS-2R User Manual   from our download section   http://iknowvations.in/downloads/.  . If you have any technical information, do write to our support team at support@iknowvations.in

PowerColor ATI Radeon HD 5670 1GB DDR5 Graphics Card No Box, No Drive CD Available About Card:  http://www.powercolor.com/us/products_features.asp?id=308#Specification Specification Graphics Engine RADEON HD5670 Video Memory 1GB DDR3 Engine Clock 775MHz Memory Clock 667 MHz x2 Memory Interface 128bit DirectX® Support 11 Bus Standard PCIE 2.1 Standard Display Connecors DL DVI/ HDMI/ VGA Feature Support OpenGL Support CrossFireX™ Technology Support ATI Stream Technology Support ATI Eyefinity Technology ATI Hypermemory Technology Support Display Support VGA Output On Board DVI Output DL DVI-I DisplayPort HDMI On Board TV Output HDTV Output HDCP Support Support Maximum Resolution VGA 2048x1536 DVI 2560x1600 DisplayPort HDMI 1920x1200 Power Specs + Board Dimensions Board Dimensions 182mmx111mmx38mm Minimum System Power requirement (W) 400W Extension Power Connector

 8 channel RS232 Relay & DAQ Board -iRSD-8R Welcome to the world of Computer Automation. This RS232 Relay Board - iRSD-8R is a perfect companion for all your computer automation projects. It is RS232 based card having 8 onboard relays for switching external devices and up to 8 Digital Input/Output and 4 Analog channels. The Analog channels have 10 bit resolution for connecting many sensors to measure parameters like Temperature, Pressure, Humidity, Magnetic etc. It uses existing Com Port (you can choose the available one), which allows easy communication with the card. Any programming language that supports serial communications (C, C#, C++, VB, VB.NET, Perl, Java etc) can be used to communicate with iRSD-8R very easily. Easy to use commands are available to communicate with iRSD-8R for Switching On/Off of Relays and playing with Input/Output channels and Analog inputs. The revised ikantrol-R242 V 1.1 software (freely downloadable from our download section at http://iknowvations.in/downloads/) can be used to test & operate iRSD-8R card. For more technical information, please download  iRSD-8R User Manual   from our download section   http://iknowvations.in/downloads/.  . If you have any technical information, do write to our support team at support@iknowvations.in

PowerColor Radeon HD 5450 2GB DDR3 Graphic Card  WITH 3 YEARS WARRANTY Item Details Graphics Engine RADEON HD5450 Video Memory 2GB DDR3 Engine Clock 650MHz Memory Clock 400MHz x 2 Memory Interface 64bit DirectX® Support 11 Bus Standard PCIE 2.1  [Compatibility] Standard Display Connecors DL DVI-D/ HDMI/ VGA Feature Support OpenGL Support CrossFireX™ Technology Support ATI Stream Technology Support ATI Eyefinity Technology ATI Hypermemory Technology Support Display Support VGA Output On Board DVI Output DL DVI-I DisplayPort HDMI On Board TV Output HDTV Output HDCP Support Support Maximum Resolution VGA 2048x1536 DVI 2560x1600 DisplayPort HDMI 1920x1200 Power Specs + Board Dimensions Board Dimensions 168mmx69mmx19mm Minimum System Power requirement (W) 350W

  The ARM7 Development Board comes with NXP’s LPC2148 microcontroller. The microcontroller can be programmed through the serial port using the on-chip serial bootloader. The board features various interfaces available on-board like LEDs, Push Buttons, Analog Input, Dual-RS232 port, EEPROM, Power Amplifier, USB connector, Buzzer, Character LCD and dedicated connectors to plug-in a Temperature Sensor, Distance measurement sensor, Accelerometer, micro SD Card and an XBEE wireless device. A JTAG connector is also provided to enable programming and debugging of the microcontroller. The board can be powered using an external power source like an adapter or can be powered using the USB port on the computer. The ARM7 Development board has been designed for optimal use of the peripherals on-chip and interfaces on-board to create a variety of applications. Features An on-board NXP’s LPC2148 microcontroller with ARM7 architecture. A power jack for an external power supply from 8 to 16V AC/DC. Alternatively the board can be powered through the on-board USB connector. A 16x2 Character LCD interface operating

Voice record module is base on ISD, which a multiple-message record/playback device. It can offer true single-chip voice recording, no-volatile storage, and playback capability for 8 to 20 seconds. The sample is 3.2k and the total 20s for the Recorder. Operating mode selector switch LED indicates if the board is recording Record up to 64 seconds of audio All pins of the ISD broken out to 0.1" headers Breadboard friendly This module use is very easy which you could direct control by push button on board or by Microcontroller such as Arduino, STM32, Chip Kit etc. From these, you can easy control record, playback and repeat and so on. 2.4V to 5VDC supply voltage On-chip 8O speaker driver Record up to 20 seconds of audio Dimensions: 37 x 54 mm SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

Description: ATMEGA168P-AU Quad Flat Package. Arduino Nano Compatible Board No USB Support (Use USB to RS232 TTL Converter to program). Supports Auto Reset Reverse Polarity Protection Max 150 mA Output Over Current Protection Input: 5 - 12 V DC Power, Status LED Indicator 33 x 18 x 6 mm Package Include 1 Piece Arduino Pro Mini Nano ATMEGA328P-AU 5V 16M (16MHZ) Board Module For Arduino Uno Nano Compatible SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Description: ATMEGA328P-AU Quad Flat Package. Arduino Nano Compatible Board No USB Support (Use USB to RS232 TTL Converter to program). Supports Auto Reset Reverse Polarity Protection Max 150 mA Output Over Current Protection Input: 5 - 12 V DC Power, Status LED Indicator 33 x 18 x 6 mm Package Include 1 Piece Arduino Pro Mini Nano ATMEGA328P-AU 5V 16M (16MHZ) Board Module For Arduino Uno Nano Compatible SHIPPING ·          Product will be shipped on same day if the order is before 2pm. ·          Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –         or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you  

http://acdc-adapter.com/asus-ve205-vw245h-4h0uh02a00-4h0uh02a01-power-supply-board-p-35895.html Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board larger image $29.99 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $26.99 5 - 9 $25.49 10 - 19 $23.99 20 - 199 $22.49 200 + $21.59 Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number: 4H.0UH02.A00 4H.0UH02.A01 Compatible model: Asus VE205 VW245H

http://acdc-adapter.com/genuine-samsung-bn4400261b-la32b530p7r-power-supply-board-p-35849.html Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board larger image $75.55 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $67.99 5 - 9 $64.22 10 - 19 $60.44 20 - 199 $56.66 200 + $54.40 Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Part Number: BN44-00261A BN44-00261B H32F1_9DY Compatible Model : Samsung LA32B530P7R

http://acdc-adapter.com/acer-al1715-al1912-power-supply-board-ar577-vp583-al1914-p-35970.html Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 larger image $29.99 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $26.99 5 - 9 $25.49 10 - 19 $23.99 20 - 199 $22.49 200 + $21.59 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number:AR577 VP-583 AL1914 Compatible model:Acer AL1715 AL1912

Arduino uno r3 development board with ATmega328p CH340G Arduino clone based on current open source hardware Arduino uno Atmega 328p smd ideal for prototyping Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Summary arduino uno: ATmega328 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB of which 0.5 KB used by bootloader SRAM 2 KB EEPROM 1 KB Clock Speed 16 MHz         Features of arduino uno: ·         Replaced the expensive 16u2 with CH340G chip to avoid the driver compatibility problem which was found on some win7/win8 OSes. ·         Increased the extra pin holes to facilitate the use of DuPont line cables, with some extra useful pins. ·         Extra 3x4 pin holes, next to ICSP connector, which includes Tx, Rx, 5v, 3.3v, ground, SDA and SCL.    ·         All the rest features are kept the same as the official version   Driver installation and usage procedure: · Install   CH340G driver  . ·     Install   Arduino IDE   ß   (click here) ·     Connect the board to computer. ·     Launch Arduino IDE, select board as “arduino uno” ·     Select the com port OS created for the card(control panel   à   device manager) ·     Open basics   à   blink sketch and upload. ·     If you find any difficulty you can contact us, contact details are given below.   Factory Testing Procedure for arduino uno Atmega328p: We will make sure that we have tested the product with following procedure before shipment ·   We have uploaded blink program with 2 second blinking rate of LED ‘L’ instead of 1second default rate. ·   You can check it at the time of receipt of the product. Just connect it to the USB port of any device and the ‘L’ LED will blink at the rate of 2 second.   Package Include arduino uno: ·   1 x   arduino uno development board ·   1 x   USB cable ·   A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

Sensor Shield v5.0 expansion board for arduino electronic building blocks robot accessories Sensor Shield V5 expansion board Latest Sensor Shield V5.0 sensor expansion board to retain the advantages of version V4.0 on the basis of still only stack design, PCBImmersion Gold processing technology, the motherboard is not only the Duemilanove 2009 controller digital and analog interfacesequenceform of steering gear line extension, but also ad hoc IIC interface 32 servo controller Interface Bluetooth module communication interface, SD card module communication interface, the APC220 wireless RF module communication interface, the RB The URF v1.1 ultrasonic sensor interface12864serial and parallel interfaces, independent expansion of a more easy-to-use convenience. For beginners, you do not have a headache forthe cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit can easily connect thecommonly used sensor, a sensor requires only a common 3P the sensor cable (regardless of digital cable and analog cable), after the completion ofthe circuit connection, the preparation of the corresponding program downloaded to the Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Buy Espressif ESP Wrover kit & development board online at affordable price from Campus Component a leading electronic component provider in India. The ESP-WROVER-KIT-VB is a variant of ESP-WROVER-KIT that comes with an ESP32-WROVER-B module by default. This board features support for an LCD and Micro SD card. The I/O pins have been broken out from the ESP32-WROVER-B for easy extension. The board carries an advanced multi-protocol USB bridge (the FTDI FT2232HL), enabling developers to use JTAG directly to debug the ESP32 module through the USB interface. The development board makes secondary development easy and cost-effective. Module is FCC/ CE/ KCC/ IC/ TELEC/ SRRC/NCC certified. To know more about this product call on +919767444555 or visit website https://www.campuscomponent.com/products/espressif-esp-wrover-kit-vb-2-4-ghz-wifi-and-bt-ble-development-board/2208614000001841096

5V 2 Channel Relay with Optocoupler Description This is a 2-Channel Relay interface board, which can control various appliances, and other equipments. It can be controlled directly by Microcontroller.   Rated voltage: DC12   Rated current: 10A   Coil power: 0.36W  Contact switch voltage: 220VAC  Protective characteristics: Sealed   Contact load: Medium-power  Application: Electromagnetism  Contact Form: Conversion type With 4 mounting holes, diameter of each hole is 3.1mm, easy to install  Apply superior SONGLE relay, SPDT(single-pole double-throw), one common port, one NO and one NC  Opto-isolator, excellent anti-interference performance Low level actuation(indicator ON), high level release(indicator OFF) Maximum output of relay: DC 30 Package Info 1Pc X 5V 2 Channel Relay with Optocoupler SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Description: Two Outputs: 5v & 3.3v Input: V DC or USB Power Switchable between 0V, 3.3V & 5V Two sets of 3.3V & 5V header pins on board. On / Off Switch Package Include 1 Piece MB102 Breadboard Power Supply SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Specifications: Onboard PAM audio amplifier chip, stereo D audio amplifier. Supports 3W x 2 speakers. On-board 2-way 5.08 (mm) pitch 2P terminal for left and right channels. Working voltage: 5V DC Board size: 30 x 30(mm) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

http://acdc-adapter.com/dell-p170s-p190st-led-power-supply-board-487b80101m-l93131m-p-36131.html Dell P170S P190ST LED Power Supply Board 48.7B801.01M L9313-1M Dell P170S P190ST LED Power Supply Board 48.7B801.01M L9313-1M Condition: Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number:48.7B801.01M L9313-1M Compatible model:Dell P170S P190ST