Converter board

This simple A2D (Analog to Digital) Converter Board can log upto 8 channel of analog signal with 8 bit resolution.  This board uses the famous ADC chip from National Semiconductor. Two standard box type header connector for easy connection of the board to various development boards or project Separate box header for Data and Control signal for the ADC Screw terminal connector for easy connection of Analog signal input or sensor connection to the board +5 VDC and Gnd connection available for sourcing supply for your sensor or add-on interface or signal conditioner board Onboard oscillator source for the analog to digital converter Four mounting holes 3.2 mm each PCB dimensions 54 mm x 63 m

Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. INTRODUCTION   Serial to RS232 module by Positron allows you to convert TTL logic from your microcontroller to 232 logic levels. Using this module you can easily interface TTL logic GSMs, GPS and finger print sensor modules etc. with your microcontroller. This module can easily be used with Positron Development Boards.  SALIENT FEATURES This module has 4 pins viz. Receiver, Transmitter, Vcc and Ground These four pins can easily be connected to any of the Transmitter, Receiver, Vcc and Ground of a micro controller development board The module uses MAX232 IC and can be easily connected to your laptop using Positron’s DB9 cables

Description Mini RS232 To TTL MAX Converter Adaptor Module Serial Port Board Brand new and high quality. A converter board for electrical levels The highest baud rate: not recommended More than 120 KBPS Technical parameters: Voltage range: 3 v to 5 v Size: 9.4 mm*15.9 mm   Package Contents: 1 x Mini RS232 To TTL MAX Converter Adaptor Module Serial Port Board Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

4 Channel IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V with  male headers Features: Brand new and high quality. 4 channel board. Color is shown as pictures. Logic Level Converter Bi-Directional Module. Details: If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The CJMCU bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV' pin, low voltage (3.3V for example) to ‘LV', and ground from the system to the ‘GND' pin. Note: Due to lighting effects, monitor's brightness/ contrass settings ect, there could be some slight differences

Features: Brand new and high quality. 4 channel board. Color is shown as pictures. Logic Level Converter Bi-Directional Module. Details: If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The CJMCU bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the ‘HV' pin, low voltage (3.3V for example) to ‘LV', and ground from the system to the ‘GND' pin. Note: Due to lighting effects, monitor's brightness/ contrass settings ect, there could be some slight differences

New Double-Side SMD SOT23-3 to DIP SIP3 Adapter PCB Board DIY Converter Description: The PCB board has two sides. A side and B side it can be used to convert SOT23 (Pin pitch 0.95mm) to SIPmm pin pitch). The PCB board mounting 2.54mm pitch Pin Header, It can be plugged directly into 2.54mm PCB board or breadboard. Package content: 5-pcs DIP Converter PCB Board

New Double-Side SMD SOT23-3 to DIP SIP3 Adapter PCB Board DIY Converter Description: The PCB board has two sides. A side and B side it can be used to convert SOT23 (Pin pitch 0.95mm) to SIPmm pin pitch). The PCB board mounting 2.54mm pitch Pin Header, It can be plugged directly into 2.54mm PCB board or breadboard. Package content: 4-pcs DIP Converter PCB Board

Micro SD Storage Board adap Micro SD TF Card Memory Shield Module SPI Fr Arduino Description 1 Support Micro SD Card, Micro SDHC card (high-speed card)  2 The level conversion circuit board that can interface level is 5V or 3.3V  3 Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board  4 Communication interface is a standard SPI interface  5 4 M2 screw positioning holes for easy installation  6 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;  7 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply  8 Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal  9 Micro SD card connector: yes since the bomb deck for easy card insertion and removal  10 Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination  11 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin  V voltage regulator circuit: LDO regulator output is 3.3V level converter chip, Micro SD card supply  13 Level conversion circuit: Micro SD card into the direction of the signal is converted to 3.3V, MicroSD card interfaces to control the direction of the MISO signal is also converted into 3.3V, general AVR microcontroller system can read the signal;  14 Micro SD card connector: a self- bomb deck, easy card insertion.  15 Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination; Package Info 1Pc X Micro SD Storage Board  Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

   8051 evaluation Board is a simplest solution to start with system development. This tiny kit contains IC Base for 8051 family microcontroller. The microcontroller can be 89C51, 89S52 or even 89V51RD2.       Evaluation board contains a male burg on all the 4 ports of 8051. LED indication is given for the power supply & one for the single line of Port 1. Apart from these accessories our evaluation board also has reset button to reset the Microcontroller. This Evaluation board is flexible to use with 8051 ISP Programmer or any other universal Programmer.       The 8051 evaluateion board can be directly interfaced with GSM modem(SIM300) with TTL output and GPS receiver as well serial communication can be achieved with TTL to RS232 level converter to make it competible with RS232 level.  Download the Assembler and a Sample blink LED Program; this program is to test the ports of 8051 and the development board; use the asm51.exe assembler or any other assembling tool to get the hex file; The assembler directives have to be changed as per the tool properties.; Use Flash magic tool to program the target board. The Flash magic tool works without any problem

Description: Bidirectional Logic Level Converter is a Four-Channel Device which can be used for Voltage Level Shifting between two devices.The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'H' pin, low voltage (3.3V for example) to 'L', and ground from the system to the 'GND' pin. Features: Minimum Voltage: 3.3V and Maximum Voltage: 5V Bi-directional Logic Level conversion is possible. Package Contains: Bi-Directional Logic Level Converter

DESCRIPTION General Brand MatLogix Quantity 1 Color Green Material PCB Features -Zigbee USB Breakout - Easy to connect with PC and Laptops. -On board All Pin Expansion header. -On board LED for RX, TX and Power. Specification Power Supply Input USB Powerd. Interface USB to Serial -on board serial Usb to Serial converter IC Chipset CP Datasheet / Application Discription This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. This board also breaks out each of the XBee s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee s extended functionality, you can solder some header pins into those, or even just solder some wire. USB Driver - CP Dimensions & Weight Dimensions Weight 100 g Packing List 1 x Zigbee Explorer Board - USB. 1 x USB A type to B type Cable. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

PS2 Male Port Convert To USB Female Port, Use Your PS2 Port As USB Port, Very Usefull for When Low USB Port on Board Use Your PS2 Port As USB Port, Very Usefull for When Low USB Port on Board preventing the connection of any USB removable disks and malicious USB devices Heavy Quality Plastic Material, Colour Green, USB Male to PS2 Converter convert USB port to PS2 port Package included: 2 x Adapter

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Description: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g   Package Included: 1PCS*Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Welcome to ask any question Mob- , Email Your feedback is important for us to grow our business on , so please  leave Positive feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback

Our top seller is back with a revision, the Ultra Development board has got a revision with enhanced features. A onboard USB to serial converter to connect directly to your laptop/computer, we have done away with the RS232. Also the board is more spacious with clear division among various peripherals.  We have designed this kit, so that a beginner can gradually build up from basics like LED blinking up to standard peripherals and communication protocols without having to change boards. We are shipping a USB AT89S series programmer with this board, for easy programming. T he entire kit is very affordable and we have solid 22 video tutorials to help you get started from architecture to interfacing all the on-board peripherals. Kit Contents: Development Board with following Modules, ICs and Interfaces USB Communication with CP Eight 5mm LEDs Eight Switches

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino     Product information Features:   Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,  VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g Shipping content: 1x Micor SD TF Card Shield Expansion Board for Arduino/PIC/ATMEL

Our top seller is back with a revision, the 8051 Ultra Development board has got a revision with enhanced features. A onboard USB to serial converter to connect directly to your laptop/computer, we have done away with the RS232. Also the board is more spacious with clear division among various peripherals.  We have designed this 8051 kit, so that a beginner can gradually build up from basics like LED blinking up to standard peripherals and communication protocols without having to change boards. We are shipping a USB AT89S series programmer with this board, for easy programming. T he entire kit is very affordable and we have solid 22 video tutorials to help you get started from architecture to interfacing all the on-board peripherals. Kit Contents: 1. 8051 Development Board with following Modules, ICs and Interfaces USB Communication with CP2102 Eight 5mm LEDs Eight Switches

Product Description: 100% New, RoHS Compliant. This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips. A side for pin pitch size 1.27mm, It can be used for most of the SO、SOP、SOIC to 2.54mm DIP. B side for pin pitch size 0.65mm, It can be used for most of the SSOP、TSSOP、MSOP to 2.54mm DIP. Package content: 5 -pcs SOP8 SO8 SOIC8 TSSOP8 MSOP8 to DIP8 Converter PCB Board

5A 75W XL DC-DC Converter Adjustable Step-Down Module V to 1.25V-36V DIY Adjustable Power Supply The DC-DC Adjustable Step Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator. The voltmeter can also be shutdown. The board uses connection terminal for easy wiring. Features: Module Properties: 5A High Power 75W DC-DC adjustable step-down module Input voltage: DC V Output voltage: DC 1.25V ~ 36V continuously adjustable (the input voltage must be higher than the output voltage 1.5V) Output current: max 5A, recommended for use

Kootek PL USB to Serial TTL UART Module Converter Adapter. A handy USB to TTL converter based on the PLHX.3 LEDs are on-board to indicate power data reception and data transmission. A 5V and 3.3V output is available--you can power your project directly from the USB port so it functions as a USB power supply too. The 5-pin I O is clearly labelled on the board.Excellent driver support--drivers are available for Windows 98 to Windows 7 (32 bit and 64 bit) Mac OS 8 to OS X (32 bit and 64 bit) and Linux. Even Android is supported!

Description: ATMEGA168P-AU Quad Flat Package. Arduino Nano Compatible Board No USB Support (Use USB to RS232 TTL Converter to program). Supports Auto Reset Reverse Polarity Protection Max 150 mA Output Over Current Protection Input: 5 - 12 V DC Power, Status LED Indicator 33 x 18 x 6 mm Package Include 1 Piece Arduino Pro Mini Nano ATMEGA328P-AU 5V 16M (16MHZ) Board Module For Arduino Uno Nano Compatible SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Description The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Features： Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination; Specification: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Power supply: 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface: Standard SPI interface Positioning holes: 4 M2 screw positioning holes Package included: 1 x  Mciro SD/TF Card Memory Shield Module

Description: ATMEGA328P-AU Quad Flat Package. Arduino Nano Compatible Board No USB Support (Use USB to RS232 TTL Converter to program). Supports Auto Reset Reverse Polarity Protection Max 150 mA Output Over Current Protection Input: 5 - 12 V DC Power, Status LED Indicator 33 x 18 x 6 mm Package Include 1 Piece Arduino Pro Mini Nano ATMEGA328P-AU 5V 16M (16MHZ) Board Module For Arduino Uno Nano Compatible SHIPPING ·          Product will be shipped on same day if the order is before 2pm. ·          Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –         or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you  

PLHX USB to TTL Converter Module Package Included:       2 x PLHX module Power output: 3.3V, 5V Pins:    GND,  TX,  RX,  3.3V,  5V. Can be used for Arduino, texas launchpad etc Can be used to flash your satellite tv receiver, router, set top box, game console Overcurrent Protection The entire board is coated by high quality transparent heat-shrinkable sleeve Two data transmission indicator can monitor data transfer status

mSATA SSD to 1.8” SATA Drive Converter Best Solution that Convert Fast Speed 3.3V mSATA SSD to standard 3.3V 1.8-inch 16Pin SATA Drive! FEATURES Convert 3.3V mSATA SSD to 3.3V 1.8” SATA Form Factor 16 pin micro SATA (Signals and Power) male connector on board 100% Compatible with 1.8” SATA drive mechanical spec The mSATA SSD can be the primary bootable device containing the OS and application. Includes 2 screws for the retention of mSATA module Transparent to the operating system and does not require any drivers Supports any OS like Windows, Mac and Linux Supports industrial operating temperature range: - ºC Fully RoHS compliant

Product Description On Board MAX 485 Chip, it’s a low power transceiver for RS 485 communication On board  5.08(mm) 2P connector for RS 485 wires. All the pins of the chip are brought out, can be controlled by MCU Working voltage 5V PCB dimension:44(mm)x14(mm) Powered by Turbo Lister

Product Description On Board MAX 485 Chip, it’s a low power transceiver for RS 485 communication On board  5.08(mm) 2P connector for RS 485 wires. All the pins of the chip are brought out, can be controlled by MCU Working voltage 5V PCB dimension:44(mm)x14(mm) Package contents: 1 x  MAX485 TTL TO RS485 Convertor Module SHIPPING: power Shipping Payment Policy Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping Policy Providing A Valid And Working Mobile Number Is Mandatory For Us To Dispatch Your Order. In Case If We Find That The Number Provided By You During Order Placement To Be Incorrect We Reserve The Right To Cancel The Order And Your Amount Will Be Refunded To You Through Paisapay And Your Order Will Not Be Dispatched All orders will be dispatched within 3 working days or earlier. Order once placed cannot be cancelled or modified. Normal courier delivery times are 72 hrs for metro cities and upto 10 days for other areas. These times are only indicative and the actual delivery times may vary. Octroi, if any, will be additional and to be bourne by the buyer. Octroi is not included

Features of the Board ·         The board has adopted controller PLHX,which can stabilize the flash with high speed ·          500mA self recovery fuse for protection ·          Two data transmission indicator can monitor data transfer status

Multi Interface Board, 10 pin box header to 10pin single line header converter 10 pin single line header to 10pin box header

Kindly use US to India (110V to 240V) voltage converter or adaptor with this product DTK Computer PAM-0055I-E0 Pentium System Board.  Includes P-133Mhz CPU, Heatsink/fan and Memory. All of our items are clean and tested and carry our 30 day warranty.  If we are listing more than one unit you may not get the one pictured.  We ship fast and package items extremely well.  We have been

HP Proliant DL185 G5 Power Distribution Board 447325-001 (AC-063 A) Product spec, MPN: 447325-001 Condition: Refurbished Vinothkumar. M