Dc boost power converter

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Description Package Includes: 1 Piece new  XL Adjustable DC-DC Step-up Boost Power Converter Module Betr thn LMA It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  XL6009 Adjustable DC-DC Step-up Boost Power Converter Module Betr thn LM2577 4A It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9560773418 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

DC to DC Boost Power Converter Module XL Original, Best Quality @ Lowest Price Features Wide 5V to 32V Input Voltage Range Wide Output Voltage 5V to 35V Fixed 400KHz Switching Frequency Maximum 4A Switching Current Excellent line and load regulation High efficiency up to 94% Built

XL DC-DC step up module, better than LM, with adjustable booster power supply module, Output Max Current 4A   This module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency. Description: XTW is a 4 a switch current high-performance step-up (BOOST) module. The XLE1 module USES the second generation of high frequency switch technology as the core chip, LM performance far beyond the first generation of technology.  XL booster module cost is lower, performance is more outstanding, LM module will be eliminated. Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range; Low ultra wide output voltage 5 v ~ 35 v; Built-in 4 a efficient MOSFET switch tube, make efficiency up to 94%; (LM current only 3 a)/ High switching frequency, 400 KHZ, can use the small capacity of the filter capacitor can achieve very good effect, ripple smaller and smaller Operating temperature:-℃   Note: The output voltage must be higher than the input voltage. IN-IN + input Positive Input Negative! Positive output OUT + OUT-output negative Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: input current Vout: Output Voltage Iout: output current Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Module properties: unfenced step-up (BOOST) The input voltage: 3-32 v Continuous adjustable output voltage: 5v-35 v  Input current: 4 a (Max), no-load 18 ma Module size: 44.7 (mm) x21.7 (mm) Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: Output ripple: 50 mv (the bigger the higher the voltage, current and ripple) SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you    

DSNA is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XLE1 core chip performance than the first generation technology LM. XL boost module at a lower cost, superior performance, LM module is about to be eliminated. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V; Wide Output voltage 5V ~ 35V; Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM current is 3A) high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM frequency only 50KHz) Test comparison sample reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: Input current Vout: Output Voltage Iout: Output current Technical Parameters: Module Properties:  Non-isolated boost (BOOST) Rectification:  Non-Synchronous Rectification Input Range:  3V ~ 32V Output Range:  5V ~ 35V (Note: If you want to get the max voltage, you should make the input current as least 3A) Input Current:  4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency:  Switching frequency:  400KHz Output Ripple:  50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation:  ± 0.5% Voltage Regulation:  ± 0.5% Operating Temperature:  - ℃ Dimensions:  43mm * 21mm * 14mm (L * W * H) *Output current is greater than 2.5A (or output power greater than 10W) to work long hours, please add heat sink. Package included: 1 x  DC-DC Adjustable Step-up Boost Power Converter Module XL

LM Voltage Display Module DC-DC Buck Converter Step-Down Power Module   This is an LM DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Iteaduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W), please add a heat sink on it. Features  Adjustable Output Version Adjustable Version Output Voltage Range, 1.2V to 37V ±4% Max Over Line and Load Conditions Available

DC to DC Buck Power Converter Module LM Original, Best Quality @ Lowest Price Features • Adjustable Output Voltage Range 1.23 V − 37 V  • Guaranteed 3.0 A Output Load Current  • Wide Input Voltage Range 3V to 40 V  • 150 kHz Fixed Frequency Internal Oscillator  • TTL Shutdown Capability  • Low Power Standby Mode, typ 80 A  • Thermal Shutdown and Current Limit Protection  • Internal Loop Compensation  • Moisture Sensitivity Level (MSL) Equals 1  • Pb−Free Packages are Available  Applications  • Simple High−Efficiency Step−Down (Buck) Regulator  • Efficient Pre−Regulator for Linear Regulators  • On−Card Switching Regulators  • Positive to Negative Converter (Buck−Boost)  • Negative Step−Up Converters  • Power Supply for Battery Chargers • Solar Projects • Robo Power Supply  :Package Includes: 1 X LM DC to DC Buck Converter Module For any  queries  please feel free to write us using  "Ask Seller a Question"  link  OR  Call us on  DC to DC Buck Converter Module LM Based, LM, DC to DC, Converter, Buck, Buck Converter, LM DC to DC Buck Converter Module,

150W DC-DC Boost Converter V to V 6A Step Up Voltage Charger Power Product information Product Description     Featrure:     Module Properties: non-isolated step-up module (BOOST)     (length * width * high) (mm)     Input voltage:V     Output voltage: V (adjustable)     Output Current: 6A (MAX)     Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A)     Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX)     Easy to drive 65W 90W dual-core notebook.     Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45°c     Conversion efficiency: 94% (measured at Input 16V, output 19V 2.5A)     Output Ripple: 2% (MAX) 20M-bandwidth     Operating Temperature: Industrial (-40°c to +85°c) (ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation)     Full load temperature rise: 45°c     No-load current: 25mA typical     Voltage regulation: ± 0.5%     Dynamic response speed: uS     Short circuit protection: None (Please Install fuses and protection circuits at Input port.)     Input Reverse Polarity Protection: None (Please Series diode at the input port.)   Some Applications:     1. DIY an output adjustable vehicle power supply, connect the 12V input, and output could be V(adjustable freely), However, the output voltage can not be less than the input voltage.     2. Car laptop power supply: connected to 12V power supply, output voltage regulation as your notebook need.  

XL power module + LED Voltmeter DC-DC Boost module with adjustable voltage meter display Description: Input voltage:V Output voltage:5-52V Maximum input current:4A Transfer efficiency:94% Output ripple:50mV Operating temperature:-℃ Switching frequency:400KHz Output ripple:50mV Load regulation:±0.5% Voltage regulation:±0.5% operating temperature:-℃ Size: Functions: Short press: input/output display options Moderate press: Enter the fine-tuning state.Increase or decrease the offset (the default is 0) when the voltage display inaccurate use.Short according to the regulation, long press or long according to restore Long press: the state of low power consumption, the digital tube and the lights are out, the normal work of the module. Click the button again to restore. Normal display Clockwise to adjust output voltage: Clockwise—– increasing voltage Counterclockwise—-reduce the voltage Reverse protection diodes prevent reverse connection High-frequency bypass capacitor electric spark Note: The output voltage must be higher than the input voltage. Related questions: Q. Why the voltmeter reading error sometimes feel? A. This is because the input voltage is corrugated. Q. Voltmeter voltage are shaking is why? A. The voltmeter is a high precision voltage meter. After many tests, the accuracy is 1%. If there is a rock, that the measured voltage is not stable. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Module properties: unfenced step-up (BOOST) The input voltage: 3-32 v Continuous adjustable output voltage: 5v-35 v  Input current: 4 a (Max), no-load 18 ma Module size: 44.7 (mm) x21.7 (mm) Input mode: IN + input level is, the IN - negative input Output mode: OUT + output level is, the OUT - output is negative Conversion efficiency: Output ripple: 50 mv (the bigger the higher the voltage, current and ripple)

DC DC Converter Step Up Boost Module 3V To 5V 1A (mA) USB Charger Module Can charge USB devices rapidly using High Power switching upto mA @ 5V output Features： Module Properties: non-isolated step-up module (BOOST) input voltage: V Output voltage: 5V Output Current: the maximum mA Efficiency: Up to 92% (the higher the input voltage, the higher the efficiency) Switching frequency: 1MHz Output ripple: 20mV (MAX) Operating Temperature: Industrial (-40°c to +85°c) Voltage regulation: ± 2.5% Size:mm(L*W*H) Specification: Module uses switching chopper booster chip, high efficiency (maximum 92%), and at the same time heat dissipation is small, and chip has its own over-current protection function. Under-voltage protection function, if less than 2.5 V,it drives itself into under-voltage protection condition (good battery protection, avoids excessive discharge and damage). 5W Output Power(MAX). This module USES a TDK laminated ceramic capacitor as the main filtering capacity, can make the output ripple low to 20 mv (5 v1a output cases) Standard USB interface, can be used for USB charging of mobile phones, MP3, MP4 and other equipment. Package Contents: 1 x DC boost USB module Shipping through DTDC/Trackon/OnDot/Madhur/Speedpost                                 For more information on our products and shipping please email us at     Please note that  All items sent by us are checked before dispatch and ensured proper working condition. We are not the manufacturers of these items.  These are imported electronic items and can  easily  get damaged by mishandling or wrong connections.  Please Buy only if you can understand the product and its working well.  All details are as provided. Returns are accepted if the product has a manufacture defect. Kindly contact us

Power Adaptor 12 Volt 1 Amp Charger AC INPUT V DC OUTPUT 12V 1A   Product Description:   Professional 12 Volt DC 1 Amp power supply is suitable for powering a wide range of applications including CCTV cameras and wireless routers.   Features: 100% Brand New Excellent Quality Short Circuit, Over Voltage & Over Current Protection. Meet CEC Energy Efficiency Level IV. Incredibly Low Fault Rates No Minimum Load. This power supply is a regulated Center Positive power supply and has a 2.1mm x 5.5mm Jack It's plug design is for Indian power socket. So, no plug converter is required. Compact size & light weight. High Reliability. Regulated Stable Voltage. Good quality SMPS Based Adapter Power LED Monitor (LED Glow when

DC/DC 3.3V AMSV Power Supply Module Voltage Regulator Description: 2P single row pin input and output for easy connection Dual-panel design, the layout is nice Specially designed two rows of needle fixing holes can be fixed directly