Dc motors

The modular design of our popular DC motor range offers a high degree of flexibility to adapt to the driven machine, and to fit into a restricted space. Our Drop-In solution permits adaptation of footprint, shaft extension and flanges to match dimensions of almost all DC motors This, in combination with our short and reliable delivery times.BN 100LA| LAK 4000 d.c. motors are fully laminated, 4 pole, square frame. Output: 7-500 kW Torque: 40-4500 NmLAK 6000 D.C. motors are fully laminated, 6 pole, hexagonal frame. Power: 121-1055 kW Torque: 3874-14800 Nm LAK 4000 and LAK 6000

DC Motor / Stepper Driver H Bridge Controller This motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms, etc. This is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control. The driver greatly simplifies and increases the ease with which you may control motors, relays, etc from microcontrollers. It can drive motors upto 36V with a total DC current of up to 600mA. You can connect the two channels

DC Motor / Stepper Driver H Bridge Controller This motor driver is perfect for robotics and mechatronics projects and perfect for controlling motors from microcontrollers, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms, etc This is a high power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L298 motor driver IC and has onboard 5V regulator which it can supply to an external circuit. It can control upto 4 DC motors, or 2 DC motors with directional and speed control It can drive motors upto 46V with a total DC current of up to 4A. You can connect the two channels

Motors/generators specs:- Field = Permanent Magnet Robust construction In EXCELLENT condition. V = 12 to 14V, I = 32Amps P = 450 Watts DC Motor / DC Generator Applications:- 1)E-bike 2)Robotics. 3)Electricity generator for projects. 4)Electric motor bike Product will be exactly same as in the pics

This is a 24v DC high speed(brushless) fans that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This branded fans are costly but we avail this used fans at very low cost to the user with home delivery service in selected states in INDIA. We at "The motors" deals in USED MOTORS. This fans can be used for multipurpose project and has many applications. It’s a high quality material brushlessmotor give super speed and energy efficiency, NOTE: “The motors are used ones” Product code: AXIAL Product: DC fans Brand: Ebmpapst (germany) Cost of new motor: minimum $285 Online INR (Indian Rupee) Product condition: fresh as new ADVANTAGES: 1) Low noise 2) High speed 3) High efficiency 4) Long life 5) Compact size 6) Easy to install 7) Full metal body(thermal protected) TECHNICAL SPECIFICATION: Voltage: 24 v dc Current: 3 Amps Watt: 55 RPM: u/min Weight: gram (not exact) Availability in stock: last 1

Long Thick shaft with Power Rating = 2 H.P i.e 1.5 KW (1500W) Starts Charging 12 Volts Battery at just 360 RPM Powerful enough to operate ~ 15 ceiling Fans at the same time. Not a single modification.EVERYTHING is original as when it was manufactured. Ventilation provision. Soundless operation guaranteed. Motors/generators specs:- Field=Permanent Magnet. Robust construction.In EXCELLENT condition. Extremely HIGH torque. Applications:- 1) E-bike 2) Robotics. 3) Electricity generator for projects. 4) Electric motor bike 5) Wind Turbine Generator

L293D Arduino multi-motor control shield for arduino UNO Compatible with UNO, Mega, Diecimila & Duemilanove Product Summary:   ·         The shield contains two L293D motor drivers and one 74HC595 shift register. ·         The shift register expands 3 pins of the Arduino to 8 pins to control the direction for the motor drivers. ·         The output enable of the L293D is directly connected to PWM outputs of the Arduino. ·         The Motor Shield is able to drive 2 servo motors, and has 8 half-bridge outputs for 2 stepper motors or 4 full H-bridge motor outputs or 8 half-bridge drivers, or a combination.   Description: ·         2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  ·         Up to 4 bi-directional DC motors with individual 8-bit speed selection (about 0.5% resolution)  ·         Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  ·         4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  ·         Pull down resistors keep motors disabled during power-up  ·         Big terminal block connectors to easily hook up wires (AWG) and power  ·         Arduino reset button brought up top ·         2-pin terminal block to connect external power, for seperate logic/motor supplies  ·         compatible with UNO,Mega, Diecimila, & Duemilanove ·         Dimensions: 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in)   Package Include: ·         1pc. L293D Arduino multi-motor control shield Shipping Details: Our preferred shipping partners are for remote locations we prefer Indian speed post   Feedback: ·         In case you find any problem

DESCRIPTION Dual H Bridge DC Stepper Motor Drive Controller Board Module L298N for Arduino 1. L298N as main chip, ST corporation production. 2. Low heat,outstanding anti-interference performance. 3. High working power to 46v,large current can reach 3A MAX and continue current is 2A, power 25w. 4. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. 5. Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply. 6. Large capacity filter capacitance,afterflow protection diode, more stable and reliable. o Specifications: 2. Double H bridge drive 3. Chip: L298N (ST NEW) 4. Logical voltage: 5V 5. Drive voltage: 5V-35V 6. Logical current: 0mA-36mA 7. Drive current: 2A(MAX single bridge) 8. Size:43 x 43 x 26mm 9. Max power: 25W 10. Net weight: 25g Uses: 11. Driving stepper motor: The connection of driving a common 4 line 2 phase electric motor is shown in figure after enable ENA ENB Input the following driving timing from IN1-IN4-then the speed and direction of the stepper motor can be controlled. 12. Driving DC motor: Because this module is driven by double H bridge,it can drive two motors simultaneously. after enable ENA ENB You can input the speed and direction of PWM signal drive motor 1 from IN1 IN2 You can input the speed and direction of PWM signal drive motor 2 from IN1 IN2 We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description L298N is a kind of high voltage, high current motor driver chip produced by ST company. Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V), large output current(instantaneous peak current up to 3A, continuous working current 2A) and 25W of rated power. Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor, relay coil and so on. Using standard logic level signal control, it has two enable control ends. It permits or prohibites device having a logic power supply input without the impact of input signal,which enables the internal logic circuit part works at low voltage. The chip can connects to external detecting resistor to give the variations to the control circuit. Using L298N chip to drive the motor, this chip can drive a stepping motor or four phase stepping motor, and two DC motors as well. Features： Using L298N made by ST company as the control chip,the module has such characteristics as strong driving  ability, low calorific value and strong anti-interference ability. This module can use built-in 78M05 for electric work via a driving power supply part.But to avoid the damage  of the voltage stabilizing chip,please use an external 5V logic supply when using more than 12V driving voltage. Using large capacity filter capacitor,this module can follow current to protect diodes,and improve the reliability Specification Double H bridge drive Chip L298N (ST NEW) Logical voltage 5V Drive voltage 5V-35V Logical current 0mA-36mA Drive current 2A(MAX single bridge) Storage temperature -20 to +135 Max power 25W Weight 30g Size:mm Applied cases: 1) Driving stepper motor The connection of driving a common 4 line 2 phase electric motor is shown

ROBOT CONTROLLER AND 4 60 RPM DC MOTORS The Rhino Robot control board is versatile and expandable platform for robotics. Due to its expansion capabilities the board can be used to control all robots starting from beginners robot to advanced robots with multiple functionality. The board is compatible to 6-25VDC input compared to all robot control boards available which accepts inputs just up to 12VDC. It has onboard two 5Amp motor drivers MC and expandable to four motor drivers onboard. The motor drivers have inbuilt protection for overheating so you would not see your motor drivers burnt

Motors/generators specs:- Field = Permanent Magnet Robust construction In EXCELLENT condition. V = 12 to 14V, I = 22Amps P = 250 Watts DC Motor / DC Generator Applications:- 1)E-bike 2)Robotics. 3)Electricity generator for projects. 4)Electric motor bike Product will be exactly same as in the pics

Features The is a 5V 8-Channel Relay interface board with optocoupler which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSC, and so on. Can be powered by 5V DC Source (From USB) Or from the same source powered to Arduino or any other micro controller. Equipped with high-current relay 10A@250 VAC / 10A@28 VDC which can control both AC and DC appliances such as Solenoids, Motors, lights, fans etc High quality screw terminals provided for each relays (C, NC, NO) for quick and easy connection Interfaced with optocouplers to isolate relays & protect your microcontroller. Input Signal Pin connected to Burg stick for easy accessibility LED Status indicators to indicate the relay ON/OFF status. Dimension: 13.4 x 5.3 x 1.7cm (5.28 x 2.09 x 0.67in) Mounting holes provided Shipping contents 1 x 5V DC 8 Channel relay board as shown

RF Based DC Motor Direction Controller kit provides an easy way to control the direction of your DC Motor connected to the receiver.  This kit uses the famous HT12E and HT12D encoder / decoder chips from Holtek.  With jumper selectable address on the receiver and transmitter we can control upto 255 more motors

150 rpm dc motor- Motor with gears that runs on DC supply, Single Shaft Straight Motor - BO series motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels gives optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. Visit- https://www.campuscomponent.com/products/b1fd07e60a/2208614000001862844

150 rpm dc motor- Motor with gears that runs on DC supply, Single Shaft Straight Motor - BO series motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. Visit- https://www.campuscomponent.com/products/b1fd07e60a/2208614000001862844

New L293D motor shield, the input voltage DCV 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive)PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V(HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES The Device is a mnolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC  and stepping motors) and switching power transistors.To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use

Lithium Ion battery pack 12v and 24v You can use for school electronics project glowing leds running motors 12v bluetooth speaker backup battery etc 2500 mah (Ah) starting range custom configuration also possible contact to buy

DESCRIPTION MatLogix Arduino Uno Board with Universal Shield The ARDUINO Board (ATMEGA 8-L) is a microcontroller board based on the ATmega 8-L. It has 14 digital input/output pins, 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8 up to programmed as a USB-to-serial converter. Universal Shield: Features: A monolithic integrated, high voltage, high current, 4-channel driver Using this chip you can use DC motors and power supplies of up to 36 V, so that some pretty big motors and the chip can supply a maximum current of 600mA per channel Also known as a type of H-Bridge, which is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC Pull down resistors keep motors disabled during power-up Up to 4 bi-directional DC motors with individual 8-bit speed selection Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping LDR (light Sensor) for detecting the intensity of light. On board Regulated Power Supply 5v,12v supplys A Serial Port DC Power Supply Connector(12v Dc) LCD display 2x16Character Extra Vcc and Gnd Pins from which you can connect different devices. Potentiometer to set the light intensity of LCD Screen. Reset Switch to reset the arduino board. Slot for TSOP sensor. Kit Content: 1 x Arduino Uno Board 1 x 16x2 LCD (Female) 1 x L293D IC 1 x LDR 1 x USB Cable We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

THIS L293D DRIVER MODULE IS A MEDIUM POWER MOTOR DRIVER PERFECT FOR DRIVING DC MOTORS AND STEPPER MOTORS. IT USES THE POPULAR L293D MOTOR DRIVER IC. IT CAN DRIVE 4 DC MOTORS IN ONE DIRECTION, OR DRIVE 2 DC MOTORS IN BOTH THE DIRECTIONS. FEATURES AND USAGE L293D motor driver IC. Male burg stick connectors for supply, ground and input connection Screw terminal connectors for easy motor connection This motor driver is perfect for robotics and mechatronics projects for controlling motors from microcontroller, switches, relays, etc. Perfect for driving DC and Stepper motors for micromouse, line following robots, robot arms

Wireless 4 Channel Robot Control Kit With Dual DC Motor Drive 433Mhz RF  Best Quality @ Lowest Price Control your robot from remote using this 4 channel wireless remote control kit. Kit comes with one 4 channel wireless transmitter with push buttons on-board for sending commands to receiver unit to control the robot. Receiver unit comes with on-board L293D bidirectional dual DC motor driver. Simply Connect 9V battery to Transmitter and proper power source to receiver, connect two DC motors on receiver module and you are ready to control your two or four wheel drive robot within few minutes. You can easily control your robot reverse, forward, left & right. Description Transmitter Input Supply: 9V Battery Receiver Power Supply: 9 - 15 V DC through Battery OR Power Adapter DC Motor Output Channel: 2  Output Current Per Channel: 600 mA (Can Easily drive BO Motors OR Plastic Gear Robotic Motors) Address Selection: 8 BIT On-board DIP Switch RF Frequency: 433Mhz USE: Indoor & Outdoor Applications  Robot Controller, Wireless Remote Controller, Wireless Switching, Wireless Dual DC Motor Drive, DIY Robotic Kits:Package Includes: 1 X 4 Channel Wireless Transmitter 1 X 4 Channel Wireless Receiver With On-board Dual DC Motor Driver 1 X 9V Battery Clip (9V Battery Is not Included) For any  queries  please feel free to write us using "Ask Seller a Question" link  OR  Call us on 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller, 433Mhz, RF Module, DC Motor Driver, DC Motor Drive, l293d, 4ch wireless, 4 channel wireless remote control kit, wireless robot controller, robot, robot controller,

DESCRIPTION L293D Arduino Official Motor Drive ShieldHere is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects. 2 connections for 5V hobby servos connected to the Arduino s high-resolution dedicated timer no jitter! 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 36VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. Pull down resistors keep motors disabled during power-up Big terminal block connectors to easily hook up wires (AWG) and power Arduino reset button brought up top 2-pin terminal block and jumper to connect external power, for seperate logic/motor supplies Tested compatible with Arduino Mega, Diecimila & Duemilanove Download the easy-to-use Arduino software library, check out the examples and you re ready to go! The motor drive, can also drive 4 dc motor can be 600MA through each motor, motor can be run in to the 36V voltage between 4.5 V.Can also drive two stepper motor and two steering gear. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Special Scheme BUY 4 GET 1 FREE The All new Motor Driver Shield for your Arduino. It can run 2 servo or 2 stepper or 4 DC motor with the help of external power supply and controlling via arduino. Versatile product comes from adafruit. --  2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution      dedicated timer - no jitter! --  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%      resolution) --  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or      micro-stepping. --  4 H-Bridges: L293D chip set provides 0.6A per bridge (1.2A peak) with thermal shutdown      protection, 4.5V to 25V --  Pull down resistors keep motors disabled during power-up --  Big terminal block connectors to easily hook up wires (AWG) and power --  Arduino reset button brought up top --  2-pin terminal block to connect external power, for separate logic/motor supplies --  Tested compatible with Mega, Diecimila, & Duemilanove now, first time Made

Package Contains The All new Motor Driver Shield for your Arduino. It can run 2 servo or 2 stepper or 4 DC motor with the help of external power supply and controlling via arduino. --  2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution      dedicated timer - no jitter! --  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%      resolution) --  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or      micro-stepping. --  4 H-Bridges: L293D chip set provides 0.6A per bridge (1.2A peak) with thermal shutdown      protection, 4.5V to 25V --  Pull down resistors keep motors disabled during power-up --  Big terminal block connectors to easily hook up wires (AWG) and power --  Arduino reset button brought up top --  2-pin terminal block to connect external power, for separate logic/motor supplies --  Tested compatible with Mega, Diecimila, & Duemilanove you can learn more at http://learn.adafruit.com/adafruit-motor-shield. There you can find FAQ, Library and many more things.... Shipping Policy Providing A Valid And Working Mobile Number Is Mandatory For Us To Dispatch Your Order. In Case If We Find That The Number Provided By You During Order Placement To Be Incorrect We Reserve The Right To Cancel The Order And Your Amount Will Be Refunded To You Through Paisapay And Your Order Will Not Be Dispatched All orders will be dispatched within 3 working days or earlier. Order once placed cannot be cancelled or modified. Normal courier delivery times are 72 hrs for metro cities and upto 10 days for other areas. These times are only indicative and the actual delivery times may vary. Octroi, if any, will be additional and to be bourne by the buyer. Octroi is not included

WELCOME TO ROBOCENTRAL***    ***IMPORTED DC- DC Buck Converter ***             ! !   YOU WILL GET SAME PRODUCT AS SHOWN IN THE PICTURE! ! ****DESCRIPTION**** Arduino is a great starting point for electronics, and with a motor shield it can also be a nice tidy platform for robotics and mechatronics. Here is a design for a full-featured motor shield that will be able to power many simple to medium-complexity projects. !!!SPECIFICATION!!! 2 connections for 5V 'hobby' servos connected to the Arduino's high-resolution dedicated timer - no jitter!  Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)  Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.  4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, 4.5V to12V  Pull down resistors keep motors disabled during power-up  Big terminal block connectors to easily hook up wires (AWG) and power  Arduino reset button brought up top 2-pin terminal block to connect external power, for seperate logic/motor supplies  Tested compatible with UNO,Mega, Diecimila, & Duemilanove Dimensions(assembled): 69mm x 53mm x 14.3mm (2.7in x 2.1in x 0.6in) Package Contains  1 X L293D Motor Control Shield      we value your needs           So usually ship within same business day except Sunday or public holiday's          WE AIM AT PROVIDING BEST QUALITY PRODUCT S                    ***AT LOWEST POSSIBLE RATES ***                      * **WE  USE QUALITY SHIPPING ONLY***           (TO ENSURE THAT THE PRODUCT REACHES YOU AT THE EARLIEST)         YOUR FEEDBACK IS HIGHLY VALUABLE FOR OUR BUSINESS TO GROW   **PLEASE LEAVE US THE BEST 5(STAR) RATINGS**      *********ONCE YOUR ARE SATISFIED*********   In case of any claim or complaints please contact us before leaving any neutral or negative feedback    ****And we will try our best to resolve your issue****    For Any Queries Please Call us on: / .   OR    You can email us at:            "DON'T WORRY BUY WITH CONFIDENCE"        !!!THANK'S FOR  GIVING US YOUR VALUABLE TIME!!!            **PLEASE VISIT AGAIN**

Product details: Brand new and high quality. L293D is a monolithic integrated, high voltage, high current, 4-channel driver. Basically this means using this chip you can use DC motors and power supplies of up to 10 Volts, thats some pretty big motors and the chip can supply a    maximum current of 600mA per channel, the L293D chip is also what’s known as a type of H-Bridge. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load

This is a micro size servo motor metal gears. Metal gears provide strength/torque at the cost of higher weight and quicker wear-out. This servo motor gives stall torque of 1.8 Kg.cm at 4.8V and 2.2 Kg.cm at 6V. This is a good contender for small RC toys and robots. Servo motors are a type of brush DC motors with some extra features that make them ideal for use

24V/36V 350W Permanent Magnet brush type DC Motor   Specifications: 1) DC motors for electric scooters and other electric devices  2) Voltage: 24V 3) Wattage:  350W 4) Rotation:  RPM 5) Torque: 2.5 n.m to 4 n.m 6)Efficiency(%): >75 7)Dimension(Width x Length) ? )Recommended output and transmission way: friction press wheel 9)Application: scooter and Small Electric motorcycle

Rubber grip for good traction. Diameter of the wheel: 100mm (10cm) Thickness of the wheel: 20mm (2cm) Shaft Diameter: 6mm. This package includes 2 pcs Directly fits into our 12v DC motors with 6mm shaft

New Improved Remote Controller Board Kit For Wireless Robot - 433 Mhz Rx Tx (Ideal for Robotic Vehicle) with power supply circuit Features/Specification  1.Power Supply to Transmitter Board - 9V (Battery Free) 2.Power Supply to Receiver Board -12V (Battery not Included) 3.Easy Interface with microcontroller (If required) 4.Comes with DPDT Relay Board to control 2 DC Motors(upto-4, if connected 2 left and 2 right side motor

High current darlington array: containing seven open collector darlington pairs with common emitters. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. Useful for driving a wide range of loads including Solenoids, Relays DC Motors, LED Displays & Filament Lamps. 600mA Peak Output Current 50V Output Voltage The ULN is a monolithic IC consists of seven NPN darlington transistor pairs with high voltage  and current capability. It is commonly used for applications such as relay drivers, motor,  display drivers, led lamp drivers, logic buffers, line drivers, hammer drivers and other  high voltage current applications. It consists of common cathode clamp diodes for each  NPN darlington pair which makes this driver IC useful for switching inductive loads. The output of the driver is open collector and the collector current rating of each darlington pair is 500mA.  Darlington pairs may be paralleled if higher current is required. The driver IC also consists of a 2.7KΩ  base resistor for each darlington pair. Thus each darlington pair can be operated directly with  TTL or 5V CMOS devices. This driver IC can be used for high voltage applications up to 50V. Note that the driver provides open collector output, so it can only sink current, cannot source.  Thus when a 5V is given to 1B terminal, 1C terminal will be connected to ground via darlington  pair and the maximum current that it can handle is 500A. From the above logic diagram  we can see that cathode of protection diodes are shorted to 9th pin called COM.  So for driving inductive loads, it must connected to the supply voltage. ULN is widely used