Ftdi

Valley 1 foot USB to RS232 Serial DB9 Cable Adapter FTDI Chipset Supports Windows bit. Note: This is not a video cable it is for serial communications. It will not work for converting a VGA video signal to USB. Supports: Windows Windows XP (All) Windows Server Windows Vista (All) Windows Server Windows 7 8 (All) Windows Server R2 Linux and Mac OS X. Link provided to FTDI website to download driver.FTDI Chipset Manufacturer Technical Support and Warranty Coverage - Due to counterfeit copies of Valley Enterprises interface programming cables being offered by other sellers through this listing. Please be aware that only cables purchased through Valley Enterprises or a verified reseller are guaranteed to have the FTDI Chipset and include technical support and warranty replacement.

Microcontroller ATmega328 Operating Voltage (logic level) 5 V Connectivity USB Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 8 DC Current per I/O Pin 40 mA Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader SRAM 1 KB (ATmega168) or 2 KB (ATmega328) EEPROM 1 KB (ATmega328) Clock Speed 16 MHz

Product Description This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector. The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target. This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working. This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector. One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. Powered by Turbo Lister

Product Description Note Not Genuine IC will have much more error programming. This is a redesigned CP module, fully compatible with arduino pro mini, why? because all the pins are same as our FTDI basic board, and most important is the DTR pin enabled as FTDI, so you can directly upload sketch with this one. So what is the advantage? The price is almost only one third of the FTDI basic Features: Use SILABS’s CP chip, performance is definitely more than made ​​PL, encroaching FT232RL. Full board design, full-featured interface. With RXD TXD RST 3.3V 5V DTR DCD RI RTS CTS and other full-featured interface. Some boards can’t work with normal CP boards because of the incomplete interface, now it is not a problem anymore. With 500mA resettable fuse   designed to prevent users from burning power pick the wrong computer USB, this is a must. Get hold of the plate board computer motherboard burned more harm than good. With power indicator light. Directly computer USB interface design, you can not use the computer switch wiring or extension cords. Package includes five DuPont line, you can link directly target board. Convenient and flexible. Transmission speed bps easily qualified, definitely more than PL. Borrow computer USB power supply, 3.3V and 5V power output can be provided directly to the user’s target board. Note: RXD TXD Some devices mark is not standard, even if not directly, please cross-connect. Powered by Turbo Lister

Product  description:   100% brand new Support 3.3V, 5V chipset FT232RL USB power has over current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator Pin definition: DTR,RXD,TX,VCC,CTS,GND (Some pins should be soldered) Pitch:2.54mm Module size:36mm(length)*17.5mm(width) FTDI DRIVER: Download FTDI driver to use the Module. http://www.ftdichip.com/FTDrivers.htm How to download FTDI Driver: https://learn.sparkfun.com/tutorials/how-to-install-ftdi-drivers/all SHIPPING ·         Product will be shipped on same day if the order is before 2pm. ·         Tracking details will be updated to by End of the Day. ·      Orders on  Saturday  after 2pm will be shipped on Monday. PAYMENT We accept payments through PaisaPay The best and fast mode of payment. PaisaPay offers all options to pay and is completely secure - by Credit Card/Debit Card/Online Bank Transfer.   FEEDBACK Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback.  Your feedback is important for us to grow our business on , so once you receive your product please do leave feedback. CONTACT  US Mail –       or Use "Ask a question" option on listing page. You will get response within 24hrs.                                                                                           THANK you

Valley Enterprises USB to RS232 Female Serial DB9 Cable Adapter FTDI Chipset 10 Feet. Due to counterfeit copies of Valley Enterprises cables being offered by other sellers through this listing. Only cables Sold by Valley Enterprises and Fulfilled by Amazon or Sold and Fulfilled by Valley Enterprises are guaranteed to have the FTDI Chipset and include technical support and warranty replacement.This is not a video cable it is for serial communications. It will not work for converting a VGA video signal to USB.Supports: Windows Windows XP (All) Windows Server Windows Vista (All) Windows Server Windows 7 (All) Windows 8 and 8.1 Windows Server R2 Linux and Mac OS X.Link provided to FTDI website to download USB driver and detailed installation guides.

Tera Grand - Premium High Speed USB 2.0 to Serial RS-232 DB-9 Converter - Supports Windows 8 7 Vista XP Linux and Mac - with FTDI Chipset. Tera Grand - Premium High Speed USB 2.0 Serial Adapter with FTDI Chipset for NoteBook and Laptop Users. It has one Status LED and uses FTDI Chip for up to 230K Speed. Converts a USB port into a 9-pin male RS-232 serial port capable of speeds up to bps. This USB Serial Adapter provides instant connectivity with modems ISDN TAs PDS handheld pocket PCs digital cameras POS serial printers etc. It is suitable for remote access retail and industrial applications data collection and other applications requiring a High speed and or LOW serial communications port.

From Printer Type(Type B) USB connector to micro USB connector Replace the expensive FTDI FT232RL IC to CH340 IC. Replace the main IC atmega 328 PTH to atmega SMD QFP with arduino uno bootloader. Reserved extra male pins holes, so both female and male pins available on board, with some extra useful pins. Reserved another 2×4 pin holes, next to ISCP, pins includes: TX, RX, VCC, GND, IIC-SCL, IIC-SDA, power pins All the rest features are kept the same as the official version.   First Download the CH340 Driver from http://wch.cn/downfile/195 or http://kiguino.moos.io/downloads/CH341SER_MAC.ZIP or https://www.dropbox.com/s/o2a5vntk7n5y7hi/CH341SER.zip?dl=0

Overview The Arduino Pro Mini is a microcontroller board based on theatmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board. The Arduino Pro Mini is intended for semi-permanent installation

From Arduino to a Microcontroller on a Breadboard  Minimal Circuit (Eliminating the External Clock) No components are needed to run the microcontroller, just power it up and program using any USB-ISP, FTDI breakout board or programmer. Very useful for projects. Full technical support will be provided to run the  bare-minimum  arduino.  (DEMO IMAGE MICRONTROLLER RUNNING THE LCD)     NOTE - PRICE IS OF ONE ATMEGA 328P-PU MICROCONTROLLER (RUNS WITHOUT OSCILLATOR & R-C COMPONENTS)               ARDUINO PROGRAMMABLE.  

Package Contents 1 x UNO R3 ARDUINO COMPATIBLE DEVELOPMENT BOARD 1 x FREE USB Cable "COLOR OF CABLE AND LOGOS ON BOARD MAY BE DIFFERENT FROM THE IMAGES SHOWN. IMAGES ARE FOR ILLUSTRATION PURPOSES ONLY" "EXTERNAL POWER SUPPLY IS NOT INCLUDED & HAS TO BE PURCHASED SEPARATELY" Buy Original Arduino UNO R3 from  www..in/itm/ Download Arduino IDE & Drivers:  http://arduino.org/downloads This is the new Fully 100% compatible derivative version of Uno R3 based on current open source hardware.  In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included

Package Contents 1 x ARDUINO UNO R3 (MADE IN ITALY) 1 x FREE USB Cable "EXTERNAL POWER SUPPLY IS NOT INCLUDED & HAS TO BE PURCHASED SEPARATELY" Download Arduino IDE & Drivers: w ww.arduino.org/downloads This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included

PLEASE NOTE: BEFORE BUY OUR ITEM AS SHOWN IN IMAGE WE SUPPLY USB CABLE WORHT RS. 80/- ABSOLUTELY FREE WITH IT. WE USE top courier brands like BLUEDART / FEDEX / FIRSTFLIGHT WE USE MULTI LAYER BUBBLE SHEET PACKAGING TO AVOID ANY DAMAGE IN Transit     images are   CC BY-NC-SA 3.0     Arduino Uno - R3 DEV-    Description:   This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included

Description: This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins. Special SMD Version:Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno R3 with an SMD ATmega. Features: ATmega328 microcontroller Input voltage - 7-12V 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs 32k Flash Memory 16Mhz Clock Speed We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

DESCRIPTION MatLogix Arduino Uno Board with Universal Shield The ARDUINO Board (ATMEGA 8-L) is a microcontroller board based on the ATmega 8-L. It has 14 digital input/output pins, 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8 up to programmed as a USB-to-serial converter. Universal Shield: Features: A monolithic integrated, high voltage, high current, 4-channel driver Using this chip you can use DC motors and power supplies of up to 36 V, so that some pretty big motors and the chip can supply a maximum current of 600mA per channel Also known as a type of H-Bridge, which is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor. 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC Pull down resistors keep motors disabled during power-up Up to 4 bi-directional DC motors with individual 8-bit speed selection Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping LDR (light Sensor) for detecting the intensity of light. On board Regulated Power Supply 5v,12v supplys A Serial Port DC Power Supply Connector(12v Dc) LCD display 2x16Character Extra Vcc and Gnd Pins from which you can connect different devices. Potentiometer to set the light intensity of LCD Screen. Reset Switch to reset the arduino board. Slot for TSOP sensor. Kit Content: 1 x Arduino Uno Board 1 x 16x2 LCD (Female) 1 x L293D IC 1 x LDR 1 x USB Cable We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

CRIUS MultiWii MWC I2C-GPS Navigation Board GPS Adaption Board for 328P MWC Flight Controller     Description: CRIUS MultiWii MWC I2C-GPS Navigation Board GPS Adaption Board for 328P MWC Flight Controller Features: - All GPS data available via the I2C bus to connect to 328P Multiwii FC - A LED on board show GPS 3D Fix status - ATMega 328P Microcontroller - 2 Molex 1.25mm 4Pin socket for GPS receiver and FC - 2 port for ISP and FTDI Other - Dimension: 26 x 20 x 5mm - Weight: 2.4g/6.3g (include cable) - Hole diameter: 3.1mm Package Included: - NAV Module x 1 - UART 4Pin cable (to GPS) 200mm x1 - I2C 4Pin cable (to FC) 100mm x1

NexhiTM Premium High Speed USB 2.0 to Serial RS-232 DB-9 Converter - Supports Windows 7, Vista, XP, 2000, 98, Linux and Mac / USB TO SERIAL ADAPTER (USB-2920) with FTDI Chipset

Meet the Espressif ESP32, a much-awaited sequel of the very popular ESP8266 SoC. This time around Espressif has given it a ton of integrated feature-rich peripherals. The CPU(s) is also upgraded with two individual cores from  Tensilica, each running at up to 240 MHz. Two because one takes care of the Wi-Fi and Bluetooth stacks' computational requirements and the other one dedicated for the application. This is just a lot of power waiting to be unleashed and still works on very low power for IoT applications. We are very excited with the capability of this chip and waiting to find more applications for it. At the time of writing this document, the support for ESP32 in Arduino is still kind of patchy, however Espressif has an excellent development toolchain based on the Xtensa toolchain for Tensilica controllers. We love using  Epressif's ESP-IDF toolchain and framework, it includes a great set of libraries. It works on Windows, MACOS and Linux. We use it on Ubuntu and it works like a charm. Note:  This product is still undergoing complete software testing for the various capabilities. Watch this page for more updates as we keep adding features in software for this. Note:  The Arduino core for ESP32 is still under development, so with the current state of the software, this board may not be a drop-in replacement for an Arduino. This feature should be available soon though. Features: On-board ESP32 System-On-Chip (SoC) featuring: Two   Tensilica  LX6 microcontroller cores running at 240 MHz, with 520 KB RAM !! Integrated Wi-Fi controller (802.11 b/g/n/i) up to 150 Mbps Integrated Dual-mode Bluetooth 4.2 controller ("classic" and Bluetooth low energy (BLE) support) 12-bit SAR 12-channel ADC 8-bit, 2-channel DAC Capacitive touch sensor interface LED PWM controller CAN 2.0 controller Integrated temperature sensor Integrated Hall-effect sensor  Operating temperature range: -40 C to +125 C 4 MB on-board FLASH memory On-board 2.4 GHz PCB trace antenna for Wi-Fi/Bluetooth On-board FTDI FT231X USB-UART converter Operation from single Li-Poly battery with on-board charger and regulator 2x capacitive touch switches 3x WS2812B addressable RGB LEDs Arduino Uno compatible form-factor for addition of shields Includes: 1x Kalam32-DEV board 1x 1500 mAH/3.7V Li-Ion battery 1x microUSB cable Documentation: Schematic (PDF) Schematics and code (Github) Tons of ESP32 related information at ESP32.com ESP32 IC Datasheet (PDF) Espressif ESP-IDF framework  (Recommended) Complete user guide (coming soon)

Buy Espressif ESP Wrover kit & development board online at affordable price from Campus Component a leading electronic component provider in India. The ESP-WROVER-KIT-VB is a variant of ESP-WROVER-KIT that comes with an ESP32-WROVER-B module by default. This board features support for an LCD and Micro SD card. The I/O pins have been broken out from the ESP32-WROVER-B for easy extension. The board carries an advanced multi-protocol USB bridge (the FTDI FT2232HL), enabling developers to use JTAG directly to debug the ESP32 module through the USB interface. The development board makes secondary development easy and cost-effective. Module is FCC/ CE/ KCC/ IC/ TELEC/ SRRC/NCC certified. To know more about this product call on +919767444555 or visit website https://www.campuscomponent.com/products/espressif-esp-wrover-kit-vb-2-4-ghz-wifi-and-bt-ble-development-board/2208614000001841096