Lancer driver side

Side Wing Fender 2 View Mirror Blind Spot Mirror-Silver Color Description The front fender mirror adds a classy feel while also enhancing the viewing angle of the driver. Universal for All 4WD. Color-Silver Can be installed on SX4, Endeavour, Ertiga, Fortuner Etc Made

BUY WITH CONFIDENCE!!!!! Please Check your PinCode service by Eb ay Powership  before ordering                                                                                              If your pincode is not serviceable, then please do not order! Side Wing Fender 2 View Mirror Blind Spot Mirror-White Color   Description The front fender mirror adds a classy feel while also enhancing the viewing angle of the driver. Universal for All 4WD. Color-Black Can be installed on SX4, Endeavour, Ertiga, Fortuner Etc Made

BUY WITH CONFIDENCE!!!!! Please Check your PinCode service by Eb ay Powership  before ordering                                                                                              If your pincode is not serviceable, then please do not order! Side Wing Fender 2 View Mirror Blind Spot Mirror-White Color   Description The front fender mirror adds a classy feel while also enhancing the viewing angle of the driver. Universal for All 4WD. Color-White Can be installed on SX4, Endeavour, Ertiga, Fortuner Etc Made

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Introduction: This is a small and compact LED Driver / LED Power Supply that can be used to power upto three 1 Watt LEDs. Specifications: Input Voltage: V, 50 Hz AC Output Voltage: 4 - 11 V DC Output Current: 300 mA Rated Power: (1-3) x 1W Quantity: 2 pieces Important Tips For Handling: Do not connect output terminals to input voltage, or else it will be damaged. Do not touch while connected to mains supply. Even when disconnected from mains, do not touch the input wires immediately, charged capacitors inside may cause electric shock. Do not use power LEDs without proper heat sink, or else it will damage the LEDs. More from PragmaIndia Custom Orders We sell all kinds of electronic components and tools at wholesale prices. Your custom orders are always welcome. Send us an email at with your requirements and we will get back to you at the earliest. Shipment Details We dispatch the item from our side on the same day or on the next working day after receiving payment. Any taxes or octroi charged

Introduction: This is a small and compact LED Driver / LED Power Supply that can be used to power upto three 1 Watt LEDs. Specifications: Input Voltage: V, 50 Hz AC Output Voltage: 4 - 11 V DC Output Current: 300 mA Rated Power: (1-3) x 1W Quantity: 1 piece Important Tips For Handling: Do not connect output terminals to input voltage, or else it will be damaged. Do not touch while connected to mains supply. Even when disconnected from mains, do not touch the input wires immediately, charged capacitors inside may cause electric shock. Do not use power LEDs without proper heat sink, or else it will damage the LEDs. More from PragmaIndia Custom Orders We sell all kinds of electronic components and tools at wholesale prices. Your custom orders are always welcome. Send us an email at with your requirements and we will get back to you at the earliest. Shipment Details We dispatch the item from our side on the same day or on the next working day after receiving payment. Any taxes or octroi charged

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. Aslb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one aslb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, aslb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. Aslb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. Aslb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Step into motor usually defines has step from corner or step number parameter, General of motor a go are is is divided into 200 step, is step from corner for 1.8 degrees, EasyDriver has step from subdivision features, this paragraph drive Board of fine is divided into 8 subdivision, is will motor of each step again fine is divided into 8 step, such can can get more precise of control, that is EasyDriver needs 1600 step to completed a full of 360 degrees rotating. Ms1 and MS2 is a stepping motor subdivision resolution selection logic input port; Dir is the choosing of motor operation; Reset to reset the chip initializer and block all external output; Step pulse input ports; Out1a, out1b, out2a, and out2b into two h bridge on the output port; Enable to enable; Sleep sleep mode; Sense1, sense2 for h-bridge current detecting resistors; REF is the reference voltage; GND for logic and power; RC1, RC2 for the h-bridge is a fixed deadline for analog inputs. A3967slb is United States Allegro produced micro-step PWM constant current control of two-phase stepping motor driven dedicated drive. Its operating voltage up to 30v, current up to 750ma, one a3967slb driving a two phase stepping motor enables 8 subdivision driving. Chip internal PWM current control circuit can be set through PFD voltage for slow and fast, mixing three current decay modes, if the PFD-side voltage is higher than 0.6vdd, slow decay mode is selected. Below the 0.21vdd, fast decay mode is selected. Mixed decay modes between the two. In addition, a3967slb provides perfect protection measures, including the transient voltage, overheat protection, preventing current passthrough, under-voltage lock function. A3967slb and does not require additional interface circuitry between the microprocessor, the chip-production easystepper Interface, 8 control lines was reduced 2 (step size and direction), you simply enter the control pulses for stepper motor, embedded converters for stepping motor control can be achieved. A3967slb need a few resistors and capacitors to adjust its parameters throughout the driving circuit is very simple. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Only 1 Piece Left ! Hurry Up Remotely lock and unlock your car Direction light flashing Have LED indicator Central door lock automatically Remote car location Remote trunk release Universal for any cars If your car doesn't have Central Locking, then you need also actuator kit which installs on your car doors to open and close the lock. This kit only converts your central locking to remote control wireless lock unlock car doors. Central Locking (means you unlock or lock your all car doors with your main driver side car door lock) Specification: Control box size: 8.5 x 6 x 2.5cm (L x W x H) 2 Remote Controllers size: 5.5 x 2.8 x 1cm (L x W x H) Distance: About meters Working Voltage: 12V Working Current: 12MA Working Frequency: 315MHz Control box color: Black   Package include: 1 x Control box 2 x Remote Controllers 1 x LED connection wire 1 x Wire 1 x Adhesive tape 1 x Operation instruction Attention: The installation had better to be operated by the technician

WinFast NF4UK8AA-8EKRS  powered by Foxconn Overview: AMD Athlon™ 64 and 64 FX processors, Socket MT/s HyperTransport™  - Dual channel DDR400 / DDR333 / DDR 266 DRAM x4 DIMMs, Max 4GB  - 2 PCIe x 1  - 4 Serial ATA II w/ RAID   - IEEE (Fire Wire)  - 7.1 channel Audio, AC97 interface (Realtek)  - GbE LAN (CICADA)  - 8 USB 2.0 ports SPECIFICATION: Processor Socket 939 for AMD Athlon™ 64 and 64 FX processors Chipset NVIDIA NF4 Ultra (Single chipset solution) Front Side Bus Up to MT/s HyperTransport™ Memory Dual channel DDR400 x4, support up to 4GB VGA on Die N/A Expansion Slots 1 x PCIe x16, 2 x PCIe x1 and 4 x PCI slots IDE ATA133 x 2 Serial ATA(SATA)/RAID Supports 4 Serial ATAII devices, RAID 0, RAID 1, RAID 0+1 Audio Integrated 7.1, Realtek ALC 850 (AC97 interface) - support S/PDIF-out LAN GbE (integrated GbE MAC + Cicada CIS GbE PHY) IEEE; Agere FW (support 2 ports) Back Panel I/O Ports 1 x PS/2 Keyboard  1 set 7.1 channel Audio Jack  1 x PS/2 Mouse  1 x Parallel  1 x LAN  1 x COM  4 x USB 2.0  1 x IEEE (Fire Wire)  1 x Coax S/PDIF out port  Internal I/O Connectors 1 x CD In  1 x a x1  2 x USB 2.0 headers, support 4 ports  1 x S/PDIF  1 x IrDA header BIOS Features LPC ROM 4M (SST49LF004B and PM49FL004), ACPI 1.0b, APM 1.2, PnP 1.0a, SMBIOS 2.3, USB 2.0, WfM 2.0 Support CD Chipset Drivers, DirectX 9.0, RAID Driver, VGA Driver, USB 2.0 Driver, Audio Driver, Network Driver, Adobe Reader 6.0, SuperUtilities, Norton Internet Security Standards/Manageability USB2.0, WfM 2.0, DMI 2.0, WOL by PME, LPC 1.1 Interface, PC Special Features Wake on ring, LAN, USB, keyboard & mouse, STR (Suspend-to-Ram), STD (Suspend-to-Disk), SuperRecovery, SuperBoot, SuperBIOS-Protect, SuperSpeed by BIOS, SuperStep, SuperLogo, SuperUpdate by CD Driver, MediaShield, overclocking Form Factor ATX (12” x 9.6”)

  WinFast NF4UK8AA-8EKRS  powered by Foxconn Overview: AMD Athlon™ 64 and 64 FX processors, Socket 939  - 2000 MT/s HyperTransport™  - Dual channel DDR400 / DDR333 / DDR 266 DRAM x4 DIMMs, Max 4GB  - 2 PCIe x 1  - 4 Serial ATA II w/ RAID 0, 1, 0+1  - IEEE 1394 (Fire Wire)  - 7.1 channel Audio, AC97 interface (Realtek)  - GbE LAN (CICADA)  - 8 USB 2.0 ports SPECIFICATION: Processor Socket 939 for AMD Athlon™ 64 and 64 FX processors Chipset NVIDIA NF4 Ultra (Single chipset solution) Front Side Bus Up to 2000 MT/s HyperTransport™ Memory Dual channel DDR400 x4, support up to 4GB VGA on Die N/A Expansion Slots 1 x PCIe x16, 2 x PCIe x1 and 4 x PCI slots IDE ATA133 x 2 Serial ATA(SATA)/RAID Supports 4 Serial ATAII devices, RAID 0, RAID 1, RAID 0+1 Audio Integrated 7.1, Realtek ALC 850 (AC97 interface) - support S/PDIF-out LAN GbE (integrated GbE MAC + Cicada CIS8201 GbE PHY) IEEE1394 2; Agere FW322-06 (support 2 ports) Back Panel I/O Ports 1 x PS/2 Keyboard  1 set 7.1 channel Audio Jack  1 x PS/2 Mouse  1 x Parallel  1 x LAN  1 x COM  4 x USB 2.0  1 x IEEE 1394 (Fire Wire)  1 x Coax S/PDIF out port  Internal I/O Connectors 1 x CD In  1 x 1394a x1  2 x USB 2.0 headers, support 4 ports  1 x S/PDIF  1 x IrDA header BIOS Features LPC ROM 4M (SST49LF004B and PM49FL004), ACPI 1.0b, APM 1.2, PnP 1.0a, SMBIOS 2.3, USB 2.0, WfM 2.0 Support CD Chipset Drivers, DirectX 9.0, RAID Driver, VGA Driver, USB 2.0 Driver, Audio Driver, Network Driver, Adobe Reader 6.0, SuperUtilities, Norton Internet Security Standards/Manageability USB2.0, WfM 2.0, DMI 2.0, WOL by PME, LPC 1.1 Interface, PC2001 Special Features Wake on ring, LAN, USB, keyboard & mouse, STR (Suspend-to-Ram), STD (Suspend-to-Disk), SuperRecovery, SuperBoot, SuperBIOS-Protect, SuperSpeed by BIOS, SuperStep, SuperLogo, SuperUpdate by CD Driver, MediaShield, overclocking Form Factor ATX (12” x 9.6”)

Stylish 2.1 Speaker System The M by Edifier is a fashionable 2.1 speaker system that transforms traditional multimedia speaker system into a trendy accessory. Equipped with Bluetooth, this 2.1 system is transformed into a versatile speaker system that can be paired with bluetooth enabled devices to satisfy a variety of audio applications without the constraint of wires and cables. The satellites feature a translucent angled stand that projects audio output towards a listener. The design also provides stability to the satellites and effectively reduces the possible audio interference that can emanate from surfaces the unit is placed on. The wooden MDF enclosd subwoofer features a front facing bass reflex port that enhances the audio output and a bass trimmer dial allows users to adjust the bass output of 27watts and can be connected to any audio host by the 3.5mm audio connecting cable. A master volume control dial is located on the side panel of the subwoofer with the bass trimmer and 3.5mm line-in port. The M is an ideal 2.1 speaker system for home or office, complimenting laptops, Desktops or small TV displays for gaming and home audio. Features Bluetooth audio input option for Bluetooth enabled devices Uniquely designed, upward angled satellites projects sound towards the listeners Translucent satellite stands provides support, the structure reduces possible interference that originates from surfaces Master volume and bass adjustment dials located on the side panel of the subwoofer 3.5mm line-in jack located on the side of the subwoofer for connectivity to audio hosts 5 inch super bass driver and 23/4 inch mid-range and tweeter drivers provide 27watts RMS audio output Front facing bass reflex port for enhanced bass audio output Wooden MDF subwoofer housing enhances audio output and reduces audio resonance Specifications Power Output: RMS 8W x 2 + 18W Signal to noise ratio: ≥85dBA Input sensitivity: R/L: 450 mV±50mV SW: 100 mV±20mV Input type: Bluetooth, 3.5mm auxiliary Adjustment: Master volume and bass adjustment dial on subwoofer Bass unit: 5 inch (131mm), magnetically shielded, 8Ω Mid-range & treble unit: 2¾ inch (73mm), magnetically shielded, 4Ω Dimension: Satellites: 90 mm x 158 mm x 100 mm (WxHxD) Subwoofer: 164 mm x 192 mm x 278 mm (WxHxD) Weight: Approx. 4.1kg/4.83kg net/gross

Set of 4 Pcs AVR40 Base Board  Kit.  For Electronic project.  Atmel AVR - 40 Pin Base Boar d (For ATmega16, AT mega 32,Microcontroller) 1 Pcs 6 Digital Sensors Board for Line Follower    1 Pc 16X2 LCD Board for Display 1 Pc L298N Dual H-Bridge Motor Driver Board. **FREE**4 Pcs FRC Cable. ** Does not Include Any Microcontroller ** Atmel AVR - 40 Pin Base Board AVR-40Pin Development Board -For 40 pin AVR like ATMEGA16, ATMEGA32 etc it Comes without   micocontroller 1 Pc L298N Dual H-Bridge Motor Driver Board. 6 Digital IR - Photodiode Sensors Array for LFR Robot 6 IR-Photodiode Sensors Array- for Line following robot (LFR) and micro-mouse robot  (Digital out, Independent Manual Adjustable) Ideal for LFR (line-follower Robot) obstacles avoiding robots obstacles chasing robot side wall sensor maze solving robots 16x2 LCD Display Board Box Header Connection > LCD Connection (4Bit Mode) Pin#1   > RS(4) Pin#2   > EN(6) Pin#3   > D4(11) Pin#4   > D5(12) Pin#5   > D6(13) Pin#6   > D7(14) Pin#7   > No Connection Pin#8   > No Connection Pin#9   > Gnd () Pin#10 > +5V (2) Note Pin#5 of LCD (RW) is forcefully connected to Ground L298N Dual H-Bridge Motor Driver Board New Improved L298 Dual H-Bridge Board - Ideal for robot motor control, smart  full feature,compact, Compatible with AVR - 40 Board 10 Pin Box Header Connection Description Pin1= ENABLE B Pin2= ENABLE A Pin3= INPUT-3 Pin4= INPUT-1 Pin5= INPUT-4 Pin6= INPUT-2 Pin7= NOT CONNECTED Pin8= NOT CONNECTED Pin9= Ground Pin10=Vcc +5Volt    Fore More Details please refer Datasheet of L298N. ****FREE**** 4 Pcs of 10 Wire FRC (Flat Ribbon Cable) Cable - 15 cm. ,with female connectors on both ends. Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*      * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post. Please Clear Any Doubts "BEFORE" Buying any products form us.     Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components.                                                                                                        For more assistance call: +91-, "DISCLAIMER: The Seller DSR rating shown above is for representation purpose only, Please check our feedback profile to know my current DSR ratings "   Any Octroi or other local taxes if applicable will be paid by buyer only. .in Toll free Helpline: Powered by Turbo Lister

The Wharfedale Diamond 220 Bookshelf Speakers​ have won the coveted "Best Stereo Speakers Upto £200" award in What Hi-Fi's 2014 awards! A replacement for the award winning Wharfedale Diamond 121s and Wharfedale Diamond 10.1's before. The Diamond 220 is a sandwich cabinet design, which uses particle board sandwiched by MDF on either side. This new construction offers superb regidity and damping, helping to reduce the already low levels of distortion. This new, cleaner construction offers a cleaner surface for the veneer to be applied to, giving a smoother finish all round. As with the Diamond 121, this Diamond 220 ports the bass via an integral plinth, rather than the more usual front or rear holes. This provides a more efficient and even bass output whilst also making the speaker easier to place, as wall positioning doesn't need to be taken into account. The ability to place the speaker close to a wall without concern for bass performance makes the 220 a real contender. The Diamond 220 driver is formed of woven Kevlar and has ribs for added rigidity, whilst a revised magnet system gives even tighter control of the sound. Vocals sound more realistic than you'd imagine for a speaker in this price range, the bass is upbeat and the treble unit is surrounded by a deeply dished waveguide. The detailed treble is refined, which helps to improve the image of the sound allowing the listener to pick out individual instruments. Aesthetically, a high gloss finish with superior MDF outer enhances the look and feel of the cabinet, making the modest price tag of the Diamond 220s even more astonishing. Awards What Hi-Fi Awards 2014 "Best Stereo Speakers Upto £200" The Wharfdale Diamond 220 is the hotly anticipated replacement for the hugely successful 121 range of entry level bookshelf speakers. "By any standards, the Diamond 220s are musically-worthwhile speakers - and by budget standards, they're crackers." - Diamond 220, Hi-Fi World - Awarded 5 Globes. Specification:- General description 2-way bookshelf speaker Enclosure type bass reflex Transducer complement 2-way Bass driver 130mm Woven Kevlar Cone Treble driver 25mm Soft Dome AV shield No Sensitivity(2.83V - 1m) 86dB Recommended amplifier power 25-100W Peak SPL 95dB Nominal impedance 8Ω Compatible Minimum impedance 4.1Ω Frequency response (+/-3dB) 56Hz - 20kHz Bass extension (-6dB 45Hz Crossover frequency 2.2kHz Cabinet Volume (in litres) 7L Height (on plinth & spikes) 315mm Width 174mm Depth (with terminals) (227+28)mm Carton size 495x320x410mm Net weight 5.3kg/pcs Gross weight 12.6kg/ctn

Polk Audio FXi A4 Diapole/Bipol Surround Speakers Set Of w Power Output, 5.25" Driver, Color: Black 3 Year Limited Company Warranty (Read Warranty Terms) 7 to 10 Day Clear Shipping Time Is Requested For This Product. Kindly Proceed To Pay Only If Acceptable 7 to 10 Day Clear Shipping Time Is Requested For This Product. Kindly Proceed To Pay Only If Acceptable 7 to 10 Day Clear Shipping Time Is Requested For This Product. Kindly Proceed To Pay Only If Acceptable Overview: Timbre-Matched Bipole/Dipole Surround Loudspeaker Add the Polk FXi A4 surround speakers to your home theater system and enjoy dramatic rear-channel sound effects with your favorite movies. These cleverly designed speakers feature two tweeters aimed 45° from each other, for an ideal mix of direct and indirect sound. Dipole/bipole operation for flexible placement A dipole/bipole switch lets you position the FXi A4s on the rear or side walls of your home theater room — you'll get great results either way. If you place them behind your listening postion, set them to bipole mode for distinct, directional sound. Or set them to dipole mode for side placement, and they'll create a more diffuse soundfield for convincing wraparound effects. A high-tech approach to accurate sound Polk carefully designed the drivers using laser testing to help identify and eliminate resonance points. The acoustically inert MDF cabinets fight internal vibrations that can compromise performance. It all adds up to enveloping surround sound that fully immerses you