Large aluminum

Neewer Camera Aluminum Tripod Head Ball Head with Universal Thread for Camera Tripod Mount, iPad Tripod Mount, iPhone Holder, Bracket, and Photography Light Stands Product Features Made of aluminum alloy; Description Note: Tripod head only, camera and tripod are NOT included. Features: Made of aluminum alloy; Fine workmanship, light weight and easy to carry; Universal thread with extra large lock ring; Swivel ball connection for 360 degree rotation with tilt for portrait or landscape viewing; Fits for camera tripod mount, iPad tripod mount, phone holder, etc. Specifications: Materials: Aluminum Alloy Color: Black Size: 2 x 1.4 x 2.7

The Abeo 283AT 3-Section Aluminum Tripod (Legs Only) from Vanguard is a set of sturdy heavy-duty aluminum alloy tripod legs with premium magnesium die-cast camera plate construction that can support up to 17.6 lb. A hexagon-shaped center column prevents the column from rotating unintentionally..Tension-adjustable q q uick-flip locks control the height of the legs making for a fast set-up and breakdown. Each leg can be adjusted independently to a - or 80-degree angle. The rubber feet on the legs can convert to large spikes for use on soft or rough terrain ice or sand. Thick foam on the upper part of each leg makes the tripod easy and comfortable to handle

The Alta CA 233AP Aluminum Tripod with Pan Tilt Head from Vanguard is a 3-section camera support with a pan tilt head for photo or video use. It weighs 3.3 lb and has a load capacity of 11 lb. When fully extended it reaches 61 and can fold down to 24.2 for transport. Its legs adjust to 20 deg 40 deg 60 deg and 80 deg angles for uneven terrain or low angle-shooting. The included pan tilt head has a quick-release plate and separate pan and tilt locks. There are two panning surfaces one on the bottom of the head and another just below the camera. This allows you use the bubble level to adjust the camera to the horizon and then pan the camera along the horizon line. An ergonomic pan handle controls the front-to-back tilt while a large locking knob controls the bottom panning and a smaller knob controls the top panning motion.

The Abeo Plus 364AT Aluminum Tripod from Vanguard is a set of tripod legs that have a load capacity of 35.3 lb and weigh 7.6 lb. They can extend to 70.7 and fold down to 26 for transport. An included short column allows the tripod to reach a minimum height of 8.1 for macro and low-angle photography. The tripod s Quick Height Adjustment center column locking mechanism lets you instantly position your camera along the vertical axis with minimal effort. Simply flip the large lever lock open adjust the central column to the desired height and flip the lock back into place securing your gear into position. The tripod s legs feature flip locks and they individually adjust to 25 deg 50 deg and 80 deg angles with use of ergonomic release buttons for easy setup on uneven terrain or spreading out flat for low-angle photography. Each Leg has a padded foam grip for added comfort when carrying the tripod especially

The Abeo Plus 324AT Aluminum Tripod from Vanguard is a set of tripod legs that have a load capacity of 26.5 lb and weigh 6.4 lb. They can extend to 67 and fold down to 24.8 for transport. An included short column allows the tripod to reach a minimum height of 7.5 for macro and low-angle photography. The tripod s Quick Height Adjustment center column locking mechanism lets you instantly position your camera along the vertical axis with minimal effort. Simply flip the large lever lock open adjust the central column to the desired height and flip the lock back into place securing your gear into position. The tripod s legs feature flip locks and they individually adjust to 25 deg 50 deg and 80 deg angles with use of ergonomic release buttons for easy setup on uneven terrain or spreading out flat for low-angle photography. Each Leg has a padded foam grip for added comfort when carrying the tripod especially

The gray Manfrotto BeFree Compact Travel Aluminum Alloy Tripod is a sturdy compact tripod that extends to 56.7 supports 8.8 lb and folds up to only . The tripod s legs can be spread independently with two-position leg angle stops. The legs fold up and around the ball head a feature that helps makes this tripod so compact.. The ball head has a large ergonomic locking handle and a quick release with an included QR plate that has a mounting screw and a durable carrying case for storage and transport.

The Alta CA 204AP Aluminum Tripod with Pan Tilt Head from Vanguard is a 4-section camera support with a pan tilt head for photo or video use. It weighs 3.3 lb and has a load capacity of 11 lb. When fully extended it reaches 61 and can fold down to 22 for transport. Its legs adjust to 20 deg 40 deg 60 deg and 80 deg angles for uneven terrain or low angle-shooting. The included pan tilt head has a quick-release plate and separate pan and tilt locks. There are two panning surfaces one on the bottom of the head and another just below the camera. This allows you use the bubble level to adjust the camera to the horizon and then pan the camera along the horizon line. An ergonomic pan handle controls the front-to-back tilt while a large locking knob controls the bottom panning and a smaller knob controls the top panning motion.

The red Manfrotto BeFree Compact Travel Aluminum Alloy Tripod is a sturdy compact tripod that extends to 56.7 supports 8.8 lb and folds up to only . The tripod s legs can be spread independently with two-position leg angle stops. The legs fold up and around the ball head a feature that helps makes this tripod so compact.. The ball head has a large ergonomic locking handle and a quick release with an included QR plate that has a mounting screw and a durable carrying case for storage and transport.

The green Manfrotto BeFree Compact Travel Aluminum Alloy Tripod is a sturdy compact tripod that extends to 56.7 supports 8.8 lb and folds up to only . The tripod s legs can be spread independently with two-position leg angle stops. The legs fold up and around the ball head a feature that helps makes this tripod so compact.. The ball head has a large ergonomic locking handle and a quick release with an included QR plate that has a mounting screw and a durable carrying case for storage and transport.

The black Manfrotto BeFree Compact Travel Aluminum Alloy Tripod is a sturdy compact tripod that extends to 56.7 supports 8.8 lb and folds up to only . The tripod s legs can be spread independently with two-position leg angle stops. The legs fold up and around the ball head a feature that helps makes this tripod so compact.. The ball head has a large ergonomic locking handle and a quick release with an included QR plate that has a mounting screw and a durable carrying case for storage and transport.

The Alta CA 203AP Aluminum Tripod with Pan Tilt Head from Vanguard is a 3-section camera support with a pan tilt head for photo or video use. It weighs 3.2 lb and has a load capacity of 11 lb. When fully extended it reaches 61 and can fold down to 24.2 for transport. Its legs adjust to 20 deg 40 deg 60 deg and 80 deg angles for uneven terrain or low angle-shooting. The included pan tilt head has a quick-release plate and separate pan and tilt locks. There are two panning surfaces one on the bottom of the head and another just below the camera. This allows you use the bubble level to adjust the camera to the horizon and then pan the camera along the horizon line. An ergonomic pan handle controls the front-to-back tilt while a large locking knob controls the bottom panning and a smaller knob controls the top panning motion.

Neewer Table Top Studio Tent Lighting Kit(Light Tent+Accent Light+Stand)(US) Neewer Table Top Photography Studio Tent Lighting Kit, includes: (1)24xx60cm Photo Studio Light Folding Tent + (4)Colored Internal Backgrounds(Black + White + Red + Blue) + (4)Accent Light Studio Continuous Portable Lamps with Stands + (1)Adjustable cm Camera & Photo Stand Bullet Points: Kit includes:(1)24xx60cm Photo Studio Light Folding Tent + (4)Colored Internal Backgrounds(Black + White + Red + Blue) + (4)Accent Light Studio Continuous Portable Lamps with Stands + (1)Adjustable cm Camera & Cellphone Stand The photography studio light tent with special nylon fabric diffuses the external light, softens shadow, and reduces glare to create the perfect result. Four large colored non reflective fabric backgrounds(Black + White + Red + Blue) can provide internal modeling. The accent lights can eliminate unexpected shadows. The camera & cellphone stand fits all brands. Photo Studio Light Folding Tent + Colored Internal Backgrounds(Black + White + Red + Blue): The tent is made from translucent light diffusing white nylon fabric.Size:24xx60cm. Soften and reflect lights for a perfect shot. Eliminate glare and spots. Accent Light Studio Continuous Portable Lamps with Stands: Studio Quality: K Output. 110V 50W accent light lamps for excellent and even color temperature and clarity. Height adjustable. Max: cm. Hand-held use available. Camear & Cellphone Stand: Fully adjustable (Min 10.5" - Max 17"). Premium quality with aluminum and steel. Large legs with skid reduction pads make it stand firmly. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer cm Photography Translucent Soft White Diffuser Umbrella for Photo and Video Studio Features: This translucent umbrella is a plus for location shots. For shoot through, it allows approximately 50% light transmission. It acts like a very large softbox at a very low cost. The umbrellas soften, broaden and diffuse the light output of any tungsten or studio flash source.andnbsp; andnbsp; It is perfect for photographers on the go for indoor or outdoor portrait photograph. Neutral nylon fabric for white balance control. The translucent white umbrellas can be used either as a shoot through or bounce light to reduce shadows and produce an even, soft, low contrast light over a relatively large area. Professional long-lasting construction for easy portability. Simple light modifier for studio and location applications. Specification: Material: nylon material, Aluminum shaft Size: Subtense Diameter: 71" Colour: translucent white Compatibility: suitable for all studio flashes IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer cm Photography Translucent Soft White Diffuser Umbrella for Photo and Video Studio Features: This translucent umbrella is a plus for location shots. For shoot through, it allows approximately 50% light transmission. It acts like a very large softbox at a very low cost. The umbrellas soften, broaden and diffuse the light output of any tungsten or studio flash source.andnbsp; andnbsp; It is perfect for photographers on the go for indoor or outdoor portrait photograph. Neutral nylon fabric for white balance control. The translucent white umbrellas can be used either as a shoot through or bounce light to reduce shadows and produce an even, soft, low contrast light over a relatively large area. Professional long-lasting construction for easy portability. Simple light modifier for studio and location applications. Specification: Material: nylon material, Aluminum shaft Size: Subtense Diameter: 60" Colour: translucent white Compatibility: suitable for all studio flashes IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer cm Photography Translucent Soft White Diffuser Umbrella for Photo and Video Studio Features: This translucent umbrella is a plus for location shots. For shoot through, it allows approximately 50% light transmission. It acts like a very large softbox at a very low cost. The umbrellas soften, broaden and diffuse the light output of any tungsten or studio flash source.andnbsp; andnbsp; It is perfect for photographers on the go for indoor or outdoor portrait photograph. Neutral nylon fabric for white balance control with alluminium umbrella stand. The translucent white umbrellas can be used either as a shoot through or bounce light to reduce shadows and produce an even, soft, low contrast light over a relatively large area. Professional long-lasting construction for easy portability. Simple light modifier for studio and location applications. Specification: Material: nylon material, aluminum shaft Size: Subtense Diameter: 48" Colour: translucent white Compatibility: suitable for all studio flashes IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Miktek CV3 Nine Pattern Tube Condenser Microphone Fresh Condition For Sale The Miktek CV3 is a large-diaphragm tube condenser ­microphone offering nine pick-up patterns. The CV3’s sound is truly large and produces a musical response that will please artists, producers and most seasoned engineers alike. The bottom end is big, warm and tight, with mids that are present and even, along with a high frequency response that’s sweet and airy. The CV3 is ideal for recording single vocalists, and perfect for acoustic instruments, groups of vocals, piano, string ensembles, winds, overheads on a drum kit or as ­ambient room mics. The CV3 utilizes the MK9 capsule developed by Miktek. This unique capsule features dual 1-inch diaphragms manufactured using 5-micron Mylar with a 0.4-micron layer of evaporated gold, which is precisely tensioned, mounted to carefully-tuned backplates, and set back-to-back to create the final capsule. Tight tolerances and special attention to precise machining of the backplate produce a linear off-axis response that ensures the accuracy of the microphone. The CV3’s head amplifier employs exotic discrete components together with a hand selected subminiature pentode vacuum tube, in which the high-voltage circuit has been uniquely implemented, the CV3 challenges the performance of the best-in-class industry standards without hesitation. The output stage features a custom AMI transformer, which offers a classic sound and an extended low frequency response found in the earliest versions of the most famous vintage tube microphones. The Miktek CV3 is hand assembled, tested and packaged in Nashville, Tennessee, USA using components from the US, Europe and Asia. Each microphone includes its serialized ­frequency response graph created during final testing.The CV3 is packaged with its swivel mount in a wooden box, which is set inside an aluminum case with the included power supply unit, 7-pin XLR cable and shock mount. Features: Classic Large-diaphragm Tube Condenser Design MK9 Dual 1-inch Capsule with 5-micron Mylar, Evaporated Gold Diaphragms Nine Selectable Pick-up Patterns Custom Designed Made in USA Miktek Output Transformer Hand Selected Subminiature Pentode Vacuum Tube Individual serialized Frequency Response Graph External Power Supply and 7-pin XLR Cable Wood Presentation Case with swivel-mount, shock-mount and rugged aluminum Carrying Case

This PPL-GM Quick-Release Plate and Grip from Sunwayfoto is made from CNC machined aluminum to fit the Lumix DMC-GM1 mirrorless camera. It has a satin anodized surface to provide abrasion and corrosion resistance and a locating pin to prevent camera twist. On the bottom of the PPL-GM is a removable Arca-type quick-release plate and a large wheel that allows you to attach your camera by hand without the need for tools. A vertical grip provides improved handling.

The BE-117 Ball Head from Oben is a lightweight aluminum ball head that features an Arca-type compatible quick-release system. It has a large locking knob to control the movement of the ball and a separate knob for the 360 deg panning movement. The BE-117 s multiple knobs enable higher-precision adjustments to the head than are possible with single-lever heads. Taking panoramic photos is simple for instance because you can pan a specific number of degrees while keeping the head s tilt position locked. In fact the BE-117 features degree markings around its circumference to aid

The FB-28i Ball Head from Sunwayfoto is a compact and lightweight (7.3 oz) Arca-type compatible tripod head with a load capacity of 26.5 lb. It is CNC machined from aircraft-grade aluminum making it both lightweight and strong. The ball head has a large locking knob that controls the movement of the ball and a separate locking knob to control the panning of the head. A scale is located on the base of the head with an index direction mark for accurate panoramic stitches.

The Elite Series 80 quot Professional Heavy Duty Tripod from XIT is a three-section aluminum alloy camera support with foam padded legs and angle-adjustable legs. This leg-spreading feature allows the tripod to rise to a height of 80 quot yet go as low as 8.0 quot for macro or low-angle shooting. The pan-tilt head features a large ergonomic handle a quick release with camera plate and two bubble levels for seamless panoramic shots. The Elite Heavy Duty Tripod folds down to 26 quot to fit