Latch

SATA III (SATA 3) cable red (40cm) with Locking Latch straight to Right Angle : 40cm Length Top Quality Sata 3 Cable. SATA revision 3.0 (SATA III) provides up to 6 Gbps data throughput Straight-through connector on one end, 90-degree connector on the other Includes locking latch on each end of the cable to ensure it doesn't work itself loose Backwards compatible with SATA revision 1 and 2 (SATA I and SATA II) Product Description: 40cm SATA 3.0 cable, RIGHT ANGLE to straight w/ metal latch,red color SUPER FAST 6GB/S. Backwards compatible with SATA revision 1 and 2 (SATA I and SATA II). Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps. While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required. Storite SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management

SATA III (SATA 3) cable black (40cm) with Locking Latch straight to Right Angle 90 Degree | compatible up to S-ATA/600 | Serial ATA | 1,5GBs/3GBs/6GBs (backward compatible) | S-ATA Cable l Compatible with Sata I and Sata II 40cm Length Top Quality Sata 3 Cable. SATA revision 3.0 (SATA III) provides up to 6 Gbps data throughput Straight-through connector on one end, 90-degree connector on the other Includes locking latch on each end of the cable to ensure it doesn't work itself loose Backwards compatible with SATA revision 1 and 2 (SATA I and SATA II) 40cm SATA 3.0 cable, RIGHT ANGLE to straight w/ metal latch,black color SUPER FAST 6GB/S. Backwards compatible with SATA revision 1 and 2 (SATA I and SATA II). Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps. While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required. Storite SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management

Other Items Feedbacks About Us Contact Us Add To Favorites CNB755-New 5 Pcs CD Bit Latch/4-16 Line Decoder CMOS IC 's Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Other Items Feedbacks About Us Contact Us Add To Favorites CNB754-New 5 Pcs CD - BCD To 7 Segment Latch Decoder Driver CMOS IC 's Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

Latch and Retain mSATA SSD to 9.5mm 2.5” SATA Drive Best Solution that Convert and Easily Retain Fast Speed mSATA SSD as normally standard 2.5 inch 9.5mm height SATA Solid State Drive! FEATURES Convert Full Size mSATA SSD to 2.5” drive Form Factor Supports SATA I, SATA II and SATA III (6Gbps) 100% Compatible with 2.5” SATA drive mechanical spec 22 pin SATA (Signals and Power) male connector on board The mSATA SSD can be the primary bootable device containing the OS and application. Latch mSATA connector on board, no need the screw for the retention of mSATA SSD Transparent to the operating system and no driver required Supports any OS like Windows, Mac and Linux Includes 9.5mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws Dimension of PCBA with 2.5” frame: mm x mm x 9.5mm SSD & PCBA power from SATA 5V input Provides mSATA SSD Max 3.3V/2A power source Supports industrial operating temperature range: - ºC Fully RoHS compliant

New 10 Pcs - Collection of CD 4XXXX  Series. For  Electronic  &  DIY Kits. CD - Hex Buffer -1Pc. CD - Quad Bilateral Switch -1Pc. CD - BCD to 7-segment decoder -1Pc. CD-Bit Priority Encoder -1Pc. CD Bit Latch/4-16 Line Decoder -1Pc. CD bit Addressable Latch -1Pc. CD channel Analog Multi./Demultiplexer -1Pc. CD - Quad 2 Input NAND Schmitt Trigger -1Pc. CD - BCD To 7 Segment Latch Decoder Driver -1Pc. CD - Dual Precision Monostable Multivibrator -1Pc.   Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

Other Items Feedbacks About Us Contact Us Add To Favorites     New 10 Pcs - Collection of CD 4XXXX  Series  For  Electronic  &  DIY Kits. CD - Hex Buffer -1Pc. CD - Quad Bilateral Switch  -1Pc. CD - BCD to 7-segment decoder  -1Pc. CD-Bit Priority Encoder  -1Pc. CD Bit Latch/4-16 Line Decoder  -1Pc. CD bit Addressable Latch -1Pc. CD channel Analog Multi./Demultiplexer -1Pc. CD - Quad 2 Input NAND Schmitt Trigger -1Pc. CD - BCD To 7 Segment Latch Decoder Driver -1Pc. CD - Dual Precision Monostable Multivibrator -1Pc. Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

RAID 2x mSATA SSD to 2.5” 7mm SATA III SSD Best Solution that Easily Latch and Retain Fast Speed 2x mSATA SSD to normally standard 7mm 2.5 inch SATA III Solid State Drive with H/W RAID functionally! FEATURES 6Gbps SATA III H/W RAID Controller Convert 2x Full Size mSATA SSD to 7mm 2.5” drive Supports SATA I, SATA II, SATA III Host port Supports H/W RAID 1,  SPAN (Big Drive) and PM (2Drives) Modes Not support PM (2Drives) Mode if no Port Multiplier compatible SATA Host connection Supports SATA I, SATA II and SATA III (6Gbps) mSATA SSD 2x 100% Compatible with 2.5” SATA drive mechanical spec 22 pin SATA (Signals and Power) male connector on board The mSATA SSD can be the primary bootable device containing the OS and application. Latch type mSATA connector on board, no need the screw to retain mSATA SSD Transparent to the operating system and no software driver required Supports any OS like Windows, Mac and Linux Includes 7mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws Dimension of PCBA with 2.5” frame: mm x mm x 7mm Fully RoHS compliant

4 Channel Wired remote work on twisted 2 wire communication based on RS485 protocol, Transmitter based on Encoder PT  and decoder PT, Module has On board microcontroller for Latch outputs, two types of outputs 4Channel Latch and Momentary, Transmitter and Receiver comes with onboard Tri state address Jumpers to pair both the link.   Transmitter Supply 5V-12V DC Receiver Supply 5V-12V DC Address Setting TRI state (Open, Closed, Floating) Very Low current On Board Power and Valid Transmission LEDS Please Read data sheets for more information,

3 Channel Infra-Red Remote receiver Module is compatible with latest sony TV remote, comes with relay board.       Supply 12V DC @ 160mA (All Relay On)     3 Channel Latch or momentary output     Easy programmable and user defined outputs     Latch and Momentary programmable     On board tact switch for learning     Remote unit is not included

16 Channel Infra-Red Remote and Receiver Power Supply Remote  2X AA Battries Power Supply Receiver  7-12V DC Current Conjumptions Receiver 30mA without load Two  Modes >> J1 Closed 8 Latch + 8 Momentry >> J1 Open 16 Latch Transmitter range feet Onboard power LED Onboard Valid Transmission LED Onboard 5V regulator 12V supply on output connecter for easy realy interface DO IT YOUR SELF KIT (DIY) Kit contains Plastic Infrared Remote,components, PCB and Circuit Diagram Batteries not included

5 Quantity x SATA III (SATA 3) cable black (40cm) straight to Right Angle   Product Features 40cm Length Top Quality Sata 3 Cable. SATA revision 3.0 (SATA III) provides up to 6 Gbps data throughput Straight-through connector on one end, 90-degree connector on the other Includes locking latch on each end of the cable to ensure it doesn't work itself loose Backwards compatible with SATA revision 1 and 2 (SATA I and SATA II) Product Description: 40cm SATA 3.0 cable, RIGHT ANGLE to straight w/ metal latch,black color SUPER FAST 6GB/S. Backwards compatible with SATA revision 1 and 2 (SATA I and SATA II). Each major revision of the Serial ATA interface specification has doubled the maximum data transfer rate. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps. While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required.  SATA 6 Gbps cables are certified to provide maximum speeds from your SATA system, up to 6 Gbps when used with equivalent devices and controllers. One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management

Quality Business Laptops Used Dell Latitude E for Sale in Pune. The “tri-metal” comes from a anodized aluminum display lid, reinforced steel in the hinges, and magnesium alloy in the chassis and frame. The notebook also has a zinc alloy latch, a spill resistant keyboard, and an LCD seal to help prevent scratches and bumps. CPU: Intel Core iM 2.5GHz, Ram:4GB DDR3, Video Card: Intel® HD Graphics , Display:14.0 HD (x900) Anti-Glare LED, Hard Disk Drive: 500GB SATA, Power:6-cell (60Whr) Lithium Ion battery with Express Charge Contact Us: Brand Online Contact no: Website: http://brand-online.in/used-dell-laptops-for-sale/

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, 5 pcs New Original TL072 - Low Noise Dual JFET Op Amp for Electronics Projects ■WIDE COMMON-MODE (UP TO VCC+) AND DIFFERENTIAL VOLTAGE RANGE ■LOW INPUT BIAS AND OFFSET CURRENT ■LOW NOISE en= 15nV/√Hz (typ) ■OUTPUT SHORT-CIRCUIT PROTECTION ■HIGH INPUT IMPEDANCE J–FET INPUT STAGE ■LOW HARMONIC DISTORTION: 0.01% (typ) ■INTERNAL FREQUENCY COMPENSATION ■LATCH UP FREE OPERATION ■HIGH SLEW RATE: 16V/µs (typ) Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

8 Channel Remote kit has been designed around Holtek's HT640 Encoder and HT648L Decoder. Supply input transmitter 4.5 to 5 VDC, receiver 5 VDC RF Frequency MHz Latch or Momentary option via jumper Power indicator

EiioX PCI-E PCI Express 16X Riser Card Extender Flex Flexible Extension Cable for 1U 2U Small Case. A handly solution for raising those video cards that often cover the PCI-E 16X slot.One end is PCI-E 16X male and another end is PCI-E 16X female. Install PCI-E device freely according to dimension and position of computer case. No driver necessary and don t support hot swappableIdeal for small computer and server case like 1U or 2U. SpecificationItem weight:58gCable length: 8.5cm. Total length: 20cmDescriptionIt includes a handy latch to secure the card to the cable.The interface is PCI-E 16X.PCI-E 16X slot soldered with normal IDE ribbon cable.Package included 1 times PCI-E 16X Riser Card Extension Cable.

Monoprice 2m 28AWG External Mini SAS 26-Pin SFF- Male to Internal Mini SAS 36-Pin SFF- Male Cable Black (). Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers the SAS interface is backwards compatible with SATA. This allows the user to mix more expensive lower-capacity SAS drives for applications that require faster data access and higher reliability with lower-cost higher-capacity SATA drives for applications with lower access speed requirements. Monoprice carries a full line of quality SAS cables with connectors for every possible application both internal and external. This 2 meter long cable uses 28 AWG wires. It has an external 26-pin SFF- male Mini-SAS plug (with release ring) on one end and an internal 36-pin SFF- male SAS plug (with locking latch) on the other. Guide to SAS Connectors Type # of Pins Environment SFF- Internal SFF- External SFF- SFF- SFF- External (also sometimes internal)

BIZLINK 1.8M DISPLAYPORT CABLE DisplayPort to DisplayPort Cable The DisplayPort cable enables the connection of your DisplayPort supported computer to a monitor or other DisplayPort supported device. It features locking DisplayPort connectors providing a secure, dependable fit. Simply press the built-in one-touch latch release to unlock the connector. Its soft flexible jacket protects from bends and deformation that can damage the cable. Fully DisplayPort Compatible for Optimum Sound and Picture Quality The DisplayPort cable is fully compliant to DPCP (DisplayPort Content Protection) ensuring full compatibility and successful transmission of all audio and video content. The cable supports PC resolutions of up to x and all HDTV resolutions including p. It also supports uncompressed audio and extended color depths of up to 12-bits per component ensuring flexibility to meet most display application needs. Features Connect a DisplayPort Enabled Computer to a DisplayPort Monitor, TV or Projector  Transfers Both Uncompressed Audio and High-Definition Video Signals  Supports HDTV Resolutions up to p and x for Computers  Sends Extended Colors up to 12-Bits per Component for Billions of Colors  DisplayPort Cables Feature Superior Construction The DisplayPort cable offers superb performance and reliability. Manufactured to the latest DisplayPort specifications, this cable is engineered using the highest quality components for optimum signal transfer and maximum sound and picture quality.   kindly mention your Complete Address with landmark and the Pin Code with Mobile and Landline Contact Numbers to help us to deliver the product on time. No address change request would be entertain once the order is placed.                                                             Note: Before making payment please check if your area is servicable by below mentioned logistics partners:  Delivery

Product Description BizLink DisplayPort Display Port Cable High Quality -- 2M, 6 Feet Long -- Brand NEW -- DisplayPort to DisplayPort CableThe -- -- DisplayPort cable enables the connection of your DisplayPort supported computer to a monitor or other DisplayPort supported device. It features locking DisplayPort connectors providing a secure, dependable fit. Simply press the built-in one-touch latch release to unlock the connector. -- Its soft flexible jacket protects from bends and deformation that can damage the cable. -- Fully DisplayPort Compatible for Optimum Sound and Picture Quality The DisplayPort cable is fully compliant to DPCP (DisplayPort Content Protection) ensuring full compatibility and successful transmission of all audio and video content. The cable supports PC resolutions of up to x and all HDTV resolutions including p. It also supports uncompressed audio and extended color depths of up to 12-bits per component ensuring flexibility to meet most display application needs. Features -- Connect a DisplayPort Enabled Computer to a DisplayPort Monitor, TV or Projector -- Transfers Both Uncompressed Audio and High-Definition Video Signals -- Supports HDTV Resolutions up to p and x for Computers -- Sends Extended Colors up to 12-Bits per Component for Billions of Colors DisplayPort Cables Feature Superior Construction -- The DisplayPort cable offers superb performance and reliability. Manufactured to the latest DisplayPort specifications, this cable is engineered using the highest quality components for optimum signal transfer and maximum sound and picture quality. Kindly mention your Complete Address with landmark and the Pin Code with Mobile and Landline Contact Numbers to help us to deliver the product on time. No address change request would be entertain once the order is placed.                                                                                    Note: Before making payment please check if your area is servicable by below mentioned logistics partners:  Delivery

Other Items Feedbacks About Us Contact Us Add To Favorites 5 pcs New Original TL072 - Low Noise Dual JFET Op Amp for Electronics Projects ■WIDE COMMON-MODE (UP TO VCC+) AND DIFFERENTIAL VOLTAGE RANGE ■LOW INPUT BIAS AND OFFSET CURRENT ■LOW NOISE en= 15nV/√Hz (typ) ■OUTPUT SHORT-CIRCUIT PROTECTION ■HIGH INPUT IMPEDANCE J–FET INPUT STAGE ■LOW HARMONIC DISTORTION: 0.01% (typ) ■INTERNAL FREQUENCY COMPENSATION ■LATCH UP FREE OPERATION ■HIGH SLEW RATE: 16V/µs (typ) Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: AM-6:30PM, Monday-Saturday) email: .in Toll free Helpline: FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.