Lb ball
Top sales list lb ball
India
The BHM2 Ball Head from Induro is an Arca-type compatible magnesium alloy ball head that can hold up to 66.1 lb lb of gear. It has a large locking knob to control the movement of the ball and a separate lock to control the 360 deg panning motion. An integrated lock limiter tension disk allows you to fine-tune the ball s movement and properly balance the tension with the weight of your gear. An Arca-type quick-release plate with a camera mounting screw is included with the ball head and a bubble level on the clamp allows you to align your camera with the horizon.
₹ 23.450
See product
India
The Gitzo Series 2 GHQD Center Ball Head with Bubble Sphere is a magnesium ball head with a quick release plate that incorporates many innovative features. It is designed to match the range of high performance tripods available from Gitzo. Weighing 1.5 lb this ball head can support 31 lb. A large locking knob controls the movement of the ball while a separate lock controls the 360 deg panning motion. In the center of the locking knob is a tension or friction control dial that allows you adjust the tension of the ball to match the weight of your gear. The Spring Assisted Double Lock combines two locking systems
₹ 50.387
See product
India
The blue T-005X Aluminum Tripod with C-10X Ball Head from Sirui is a compact lightweight and stylish tripod with included head. With upward-folding legs it collapses to just 11.8 quot with the head attached and weighs just 2.2 lb. Supporting loads up to 8.8 lb this support is capable of holding DSLR cameras with most lenses and is ideal for compact and mirrorless cameras and camcorders..The T-005X features twist locks for easy setup and each leg has and automatic leg angle lock mechanism for speed and convenience. A removable center column allows for table-top and low angle shooting as low as 4.3 quot with the ball head. When fully extended the tripod reaches a maximum height of 54.5 quot with the head attached. The C-10X is an extremely capable ball head ndash its separate knobs for pan and tilt adjustments enable you to perform tasks such as panoramic photography while keeping the tilt locked. The ball head is also blue.
₹ 16.295
See product
India
The black T-005X Aluminum Tripod with C-10X Ball Head from Sirui is a compact lightweight and stylish tripod with included head. With upward-folding legs it collapses to just 11.8 quot with the head attached and weighs just 2.2 lb. Supporting loads up to 8.8 lb this support is capable of holding DSLR cameras with most lenses and is ideal for compact and mirrorless cameras and camcorders..The T-005X features twist locks for easy setup and each leg has and automatic leg angle lock mechanism for speed and convenience. A removable center column allows for table-top and low angle shooting as low as 4.3 quot with the ball head. When fully extended the tripod reaches a maximum height of 54.5 quot with the head attached. The C-10X is an extremely capable ball head ndash its separate knobs for pan and tilt adjustments enable you to perform tasks such as panoramic photography while keeping the tilt locked. The ball head is also black.
₹ 15.965
See product
India
Ideal for adventurous thrill-seeking photographers the red Manfrotto Off road Aluminum Tripod and Ball Head is a compact and lightweight camera support. It weighs just 1.4 lb and features three-section twist-to-lock telescoping legs that can hold 5.5 lb and reach a maximum height of 40. When folded down the tripod measures 24. Each leg has a walking stick style spiked foot that can be covered with the included rubber feet or sand snow baskets keeping it stable on a variety of surfaces. Adding to its compactness is its minimum diameter of just 2 when collapsed. The built-in ball head has a single locking knob to control the ball movement a thumb screw to secure a camera to the mounting plate and a bubble level to help align your frame to the horizon.
₹ 17.387
See product
India
The XB-44DDHi Superior Low-Profile Ball Head With Panning Clamp from Sunwayfoto has a load capacity of 88 lb weighs 1.1 lb and stands 3.2 quot high. It features separate locks for the panning and ball movement as well as tension control for fine-tuned adjustments. An elliptical ball design provides progressive resistance resulting
₹ 37.090
See product
India
Ideal for adventurous thrill-seeking photographers the blue Manfrotto Off road Aluminum Tripod and Ball Head is a compact and lightweight camera support. It weighs just 1.4 lb and features three-section twist-to-lock telescoping legs that can hold 5.5 lb and reach a maximum height of 40. When folded down the tripod measures 24. Each leg has a walking stick style spiked foot that can be covered with the included rubber feet or sand snow baskets keeping it stable on a variety of surfaces. Adding to its compactness is its minimum diameter of just 2 when collapsed. The built-in ball head has a single locking knob to control the ball movement a thumb screw to secure a camera to the mounting plate and a bubble level to help align your frame to the horizon.
₹ 17.387
See product
India
The T-025X Carbon Fiber Tripod with C-10X Ball Head from Sirui is a compact lightweight and stylish black carbon fiber tripod with included head. With upward-folding legs it collapses to just 11.8 quot with the head attached and weighs just 1.5 lb. Supporting loads up to 13.2 lb this support is capable of holding DSLR cameras with most lenses and is ideal for compact and mirrorless cameras and camcorders..The T-025X features twist locks for easy setup and each leg has and automatic leg angle lock mechanism for speed and convenience. A removable center column allows for table-top and low angle shooting as low as 4.3 quot with the ball head. When fully extended the tripod reaches a maximum height of 54.5 quot with the head attached. The C-10X is an extremely capable ball head ndash its separate knobs for pan and tilt adjustments enable you to perform tasks such as panoramic photography while keeping the tilt locked.
₹ 26.745
See product
India
The UBH 45X Ball Head with Bidirectional Clamp from Uniqball is a combination leveling base pan tilt head and ball head. It has a unique design that incorporates an outer ball with a bubble to level the clamp and an inner ball for panning and tilting. Once the outer ball has been leveled and locked the inner ball will only move on the Y-axis maintaining level pans. The head can also be used as a conventional ball head with a full range of movement by locking the inner ball and only using the outer ball. The UBH 45X stands 4.1 high and can hold up to 88.2 lb. It has an Arca-type compatible clamp that works with the included quick-release plate as well as most other Arca-type plates. The head s clamp is oriented on the Y-axis so that you can slide the plate front-to-back to balance your camera when using a long lens. A hex key is included to allow you rotate the clamp 90 deg. The head comes with a carrying case to protect the head when it is not
₹ 60.300
See product
India
The UBH 45 Ball Head from Uniqball is a combination leveling base pan tilt head and ball head. It has a unique design that incorporates an outer ball with a bubble to level the clamp and an inner ball for panning and tilting. Once the outer ball has been leveled and locked the inner ball will only move on the Y-axis maintaining level pans. The head can also be used as a conventional ball head with a full range of movement by locking the inner ball and only using the outer ball. The UBH 45 stands 4.1 high and can hold up to 90 lb (40 kg). It has an Arca-type compatible clamp that works with the included quick-release plate as well as most other Arca-type plates. The head s clamp is oriented on the Y-axis so that you can slide the plate front-to-back to balance your camera when using a long lens. An X-Adapter is included to allow you to mount your camera with an attached plate aligned on the X-axis. The head comes with a carrying case to protect the UBH 45 when it is not
₹ 60.300
See product
India
The Manfrotto 468MGRC4 Hydrostatic Ball Head with RC4 Quick Release is a heavy-duty magnesium alloy ball head that weighs 1.6 lb yet is capable of supporting 35 lb. Designed to meet the demands of professional photographers who want maximum control with minimal effort the 468MGRC4 uses a hydraulic system that requires very little force for an exceptional strong lock-down. The head features tension adjustment and 360 degree panning with a separate lock and a lateral tilt range of -90 deg +90 deg.. The 468MGRC4 uses the RC4 heavy-duty quick release plate.
₹ 39.387
See product
India
The ET- Aluminum Tripod with E-10 Ball Head from Sirui is a 4-section aluminum tripod with an included ball head and quick release plate..With the center column extended the tripod s maximum height is 55 quot The tripod weighs 3.0 lb and can support up to 18 lb. An included short center column allows for changeover to shoot macro or from low angles. Also the center column can be inverted to shoot from under the tripod.
₹ 20.695
See product
India
The ET- Carbon Fiber Tripod with E-20 Ball Head from Sirui is a 4-section carbon fiber tripod with an included ball head and quick release plate..With the center column extended the tripod s maximum height is 57 quot The tripod weighs 3.0 lb and can support up to 26.5 lb. An included short center column allows for changeover to shoot macro or from low angles. Also the center column can be inverted to shoot from under the tripod.
₹ 42.695
See product
India
The UBH 35 Ball Head from Uniqball is a combination leveling base pan tilt head and ball head. It has a unique design that incorporates an outer ball with a bubble to level the clamp and an inner ball for panning and tilting. Once the outer ball has been leveled and locked the inner ball will only move on the Y-axis maintaining level pans. The head can also be used as a conventional ball head with a full range of movement by locking the inner ball and only using the outer ball. The UBH 35 stands 3.7 high and can hold up to 33 lb (15 kg). It has an Arca-type compatible clamp that works with the included quick-release plate as well as most other Arca-type plates. The head s clamp is oriented on the Y-axis so that you can slide the plate front-to-back to balance your camera when using a long lens. An X-Adapter is included to allow you to mount your camera with an attached plate aligned on the X-axis. The head comes with a carrying case to protect the UBH 35 when it is not
₹ 39.400
See product
India
The Manfrotto 468MG Hydrostatic Ball Head with Camera Screw is a heavy-duty magnesium alloy ball head that weighs 1.4 lb yet is capable of supporting 35 lb. Designed to meet the demands of professional photographers who want maximum control with minimal effort the 468MG uses a hydraulic system that requires very little force for an exceptional strong lock-down. The head features tension adjustment and 360 degree panning with a separate lock and a lateral tilt range of -90 deg +90 deg.. The head comes with a retractable camera screw that will fit or female threads. It s fully compatible witht the wide range of Manfrtto quick release systems.
₹ 30.587
See product
India
The ET- Aluminum Tripod with E-20 Ball Head from Sirui is a 4-section aluminum tripod with an included ball head and quick release plate..With the center column extended the tripod s maximum height is 57 quot The tripod weighs 3.5 lb and can support up to 26.5 lb. An included short center column allows for changeover to shoot macro or from low angles. Also the center column can be inverted to shoot from under the tripod.
₹ 22.895
See product
India
The ET- Carbon Fiber Tripod with E-10 Ball Head from Sirui is a 4-section carbon fiber tripod with an included ball head and quick release plate..With the center column extended the tripod s maximum height is 55 quot The tripod weighs 2.5 lb and can support up to 18 lb. An included short center column allows for changeover to shoot macro or from low angles. Also the center column can be inverted to shoot from under the tripod.
₹ 37.195
See product
India
The Vista by Davis Sanford Voyager Lite with BHQ8 Ball Head is an aluminum tripod that weighs only 3 lb (1.36 kg) and folds down to cm). It features 3-position independent leg adjustments a quick lift 2-section center column and the BHQ8 multi-directional ball head. This tripod will hold point shoots SLRs and DSLRs and camcorders weighing up to 8 lb (3.62 kg). This versatile tripod is equipped with a directional compass bubble levels rubber spiked feet and comes with a high-quality padded carrying bag.
₹ 6.387
See product
India
The FB-36IIDDHi Ball Head with Panning Clamp from Sunwayfoto pairs an FB-36II ball head with the DDH-02i panning clamp. This combination enables you to take smooth and level panoramas. Weighing only 11.4 oz the ball head can hold up to 39.7 lb and stands 3.4 high.. This setup is ideal for shooting panoramas when your tripod is on unlevel ground allowing the ball head to act as a leveling base and the clamp to become a panning head. The ball head and clamp both pan a full 360 deg and have laser engraved index marks allowing you to precisely pan your camera for easy repeatability. The head has separate locks for the movement of the ball and the 360 deg panning for both the base and the clamp. An elongated lock for the clamp allows you to reach the lock even when using wide plates. The panning clamp has built-in safety stops and a bubble level.
₹ 21.360
See product
India
The CB-38 FTR Ball Head with QRP-50 Quick Release System from FLM is an aluminum alloy ball head that can support 55.1 lb. It has three locking knobs one controls 360 deg panning and one controls the amount of friction and movement of the ball. The third knob controls FLM s patented tilt function. When the tilt function is activated the ball moves along a straight line and acts as a tilt head. When the function is deactivated you have full control over the movement of the ball
₹ 44.895
See product
India
At 1.5 lb the Manfrotto 054 Magnesium Ball Head with Q5 Quick Release is an ideal mate to Manfrotto carbon fiber tripods. Thanks to the marriage of imagination and technology this compact head provides extremely precise movements ergonomic handling and innovative features like a 90 ndash 105 deg portrait angle selector and three built-in bubble levels. Despite its light weight and low profile it is capable of supporting up to 22 lb (10 kg). The included Q5 Quick release system with its locking plate provides speed balance and security.
₹ 26.187
See product
India
This Manfrotto 293 Aluminum Tripod and 494RC2 Quick Release Ball Head has a load capacity of 8.8 lb extends from 15.2 to 57.9 and weighs 4 lb. Its four leg sections are individually adjustable and are held
₹ 18.487
See product
India
The AC--Section Aluminum Tripod with BA-117 Ball Head from Oben is a lightweight (4.4 lb) tripod that provides reliable support for any camera and lens up to 17.6 lb. The tripod s 3-section aluminum legs and center column extend to a maximum height of 67.5 and when folded the entire system is a compact 27.3. Flip locks on each leg enable extremely fast deployment and retraction of leg stages. Three leg angles are possible and pull-tab locks secure the legs
₹ 19.595
See product
India
At just under 1.3 lb the Manfrotto 054 Magnesium Ball Head with Q2 Quick Release is an ideal mate to Manfrotto carbon fiber tripods. Thanks to the marriage of imagination and technology this compact head provides extremely precise movements ergonomic handling and innovative features like a 90 ndash 105 deg portrait angle selector and two built-in bubble levels. Despite its light weight and low profile it is capable of supporting up to 22 lb (10 kg) giving you extra insurance against tipping for lighter cameras when tilting 90 degrees. The included Q2 Quick release system with its locking plate provides speed balance and security.
₹ 22.887
See product
India
This 294 Aluminum Tripod with 496RC2 QR Ball Head from Manfrotto extends from 19.6 to a maximum height of 70.5. It has a load capacity of 11 lb and weighs 5.1 lb. The three-section legs can be independently adjusted
₹ 19.587
See product
India
The AC--Section Aluminum Tripod with BA-113 Ball Head from Oben is a lightweight (4.1 lb) tripod that provides reliable support for any camera and lens up to 11 lb. The tripod s 3-section aluminum legs and center column extend to a maximum height of 65.3 and when folded the entire system is a compact 27. Flip locks on each leg enable extremely fast deployment and retraction of leg stages. Three leg angles are possible and pull-tab locks secure the legs
₹ 18.495
See product
India
The Cullmann Magnesit Copter Mini Tripod with CB-2 Mini Ball Head doubles as a tabletop tripod and as a handheld support for a DSLR point shoot or compact camcorder. The legs are rounded on their outer side so the closed tripod provides a comfortable hand grip. When folded open the tripod head sit 6.5 high on a table or other flat surface..Composed of aircraft-grade aluminum and anodized a matte black the Copter supports up to 2.5 lb and weighs only 0.6 lb.
₹ 4.195
See product
India
The AC--Section Aluminum Tripod with BA-106 Ball Head from Oben is a lightweight (2.9 lb) tripod that provides reliable support for any camera and lens up to 6.6 lb. The tripod s 3-section aluminum legs and center column extend to a maximum height of 57.5 and when folded the entire system is a compact 23.4. Flip locks on each leg enable extremely fast deployment and retraction of leg stages. Three leg angles are possible and pull-tab locks secure the legs
₹ 10.795
See product
India
The AC- Aluminum Tripod with BA-106A Ball Head from Oben is a lightweight (2.9 lb) tripod that provides reliable support for any camera and lens up to 6.6 lb. The tripod s 3-section aluminum legs and center column extend to a maximum height of 57.5 quot and when folded the entire system is a compact 23.4 quot. Flip locks on each leg enable extremely fast deployment and retraction of leg stages. Three leg angles are possible and pull-tab locks secure the legs
₹ 11.895
See product
India
The AC--Section Aluminum Tripod with BA-108 Ball Head from Oben is a lightweight (3.3 lb) tripod that provides reliable support for any camera and lens up to 8.8 lb. The tripod s 3-section aluminum legs and center column extend to a maximum height of 59.6 and when folded the entire system is a compact 24.5. Flip locks on each leg enable extremely fast deployment and retraction of leg stages. Three leg angles are possible and pull-tab locks secure the legs
₹ 14.095
See product
-
Next →
Visit our blog
Share on Facebook
Share on Twitter