Line sensor

Sensor Shield v5.0 expansion board for arduino electronic building blocks robot accessories Sensor Shield V5 expansion board Latest Sensor Shield V5.0 sensor expansion board to retain the advantages of version V4.0 on the basis of still only stack design, PCBImmersion Gold processing technology, the motherboard is not only the Duemilanove 2009 controller digital and analog interfacesequenceform of steering gear line extension, but also ad hoc IIC interface 32 servo controller Interface Bluetooth module communication interface, SD card module communication interface, the APC220 wireless RF module communication interface, the RB The URF v1.1 ultrasonic sensor interface12864serial and parallel interfaces, independent expansion of a more easy-to-use convenience. For beginners, you do not have a headache forthe cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit can easily connect thecommonly used sensor, a sensor requires only a common 3P the sensor cable (regardless of digital cable and analog cable), after the completion ofthe circuit connection, the preparation of the corresponding program downloaded to the Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Description IR Infrared Obstacle, Proximity, Line following sensor module for Arduino, PIC by MatLogix Applications - Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

Description     Sensor Shield V5 V5.0 for Arduino Apc220 Bluetooth Analog Module Servo Motors Technical parameters: Package Includes: 1 Piece new "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">Sensor Shield V5 V5.0 for Arduino Apc220 Bluetooth Analog Module Servo Motors Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Applications - Obstacle Detector Sensor, Line Following Sensor, Proximity Sensor cm range. Potentiometer for maximum range setting. Can be used to differentiate between black and white (Can be used for line sensing) Onboard LED indication for detection Works on 5V or 3.3V input. TTL compatible output

Description Pulse sensor Arduino is used to test the heart rate sensor, students, artists, athletes, creator, game developer, or mobile terminal can develop interactive work related to heart rate. Sensors can be put on the finger or earlobe, through interconnected line can be connected to the Arduino. Heat beat indication by LED Instant output digital signal for directly connecting to microcontroller Compact Size Working Voltage +5V DC It also has an open source app, can real time your heart rate graph display. Essence is a integrated optical amplifying circuit and noise eliminating circuit heart rate sensor. Technical parameters: Operating Voltage- +5V DC regulated Operating Current- 100 mA Output Data Level- 5V TTL level Heart Beat detection- Indicated by LED and Output High Pulse Package Includes: 1 Piece new  XD-58C Pulsesensor Heart-rate Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

IR-Photodiode Sensors Array- for Line following robot (LFR) and micro-mouse robot  (Digital out, Independent Sensor Adjustable) Ideal for LFR (line-follower Robot) obstacles avoiding robots obstacles chasing robot side wall sensor maze solving robots Can be interface with ,Microchip PIC,AVR,Arduino etc. highly Sensitive Special:  Output Indicator LED for each Sensor signals              It Gives “HIGH” on detecting White/Light color surface SHIPPING: FAST SHIP BY  FEDEX   BLUEDART ARAMEX   100% transit insurance and refunds if lost by bluedart / aramex or fedex (courier will be automatically assigned by –

Product Description The LV‑MaxSonar‑EZ0 has the widest and most sensitive beam pattern of any unit from  LV‑MaxSonar‑EZ  sensor line. This makes the LV‑MaxSonar‑EZ0 an excellent choice for use where high sensitivity, wide beam, or people detection is desired.   Product Specifications   Resolution of 1 inch 20Hz reading rate 42kHz Ultrasonic sensor measures distance to objects RoHS Compliant Read from all 3 sensor outputs: Analog Voltage, RS232 Serial, Pulse Width Virtually no sensor dead zone, objects closer than 6 inches range as 6 inches Maximum Range of 254 inches (645 cm) Operates from V Low 2.0mA average current requirement Small, light weight module Designed for easy integration into your project or product Widest beam of the LV-MaxSonar-EZ sensors Great for people detection applications

Description TCS Color Sensor is a complete color detector, including a TAOS TCS RGB sensor chip and 4 white LEDs. The TCS can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200 can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient light sensing and calibration, and color matching, to name just a few. Sensor provides a readout of individual RGB color components as a digital frequency. Onboard white LEDs can be gated on and off for ambient light subtraction The included 5.6mm lens provides a well-defined field of view Module is plug-compatible with Parallax motherboards. Module can run from 3.3V or 5V logic supplies, plus 5V for the LED. The TCS3200 has an array of photo detectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which produces a square-wave output whose frequency is proportional to the intensity of the chosen color. Technical parameters: Single-Supply Operation (2.7V to 5.5V) High-Resolution Conversion of Light Intensity to Frequency Programmable Color and Full-Scale Output Frequency S0~S1: Output frequency scaling selection inputs S2~S3: Photodiode type selection inputs OUT Pin: Output frequency   Package Includes: 1 Piece new  TCS3200 color sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This ST188 infrared photoelectric reflex sensor is a optical sensor.Its output provides switching transducer.  High transmit power infrared photodiode and high sensitivity phototransistor Detecting distance adjustable range,4-13mm available Using non-contact detection In the ST188 infrared photoelectric relflex sensor A, K is an infrared emitting diode of the positive and negative electrodes, C, E is to receive the positive and negative tube Technical parameters: IF=50mA VR(Reverse Voltage)=6V Power=75mW Vceo=25V Veco=6V Pc=50mW   Package Includes: 1 Piece new  ST188 infrared photoelectric reflex sensr Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150° C, and are more stable with both temperature and supply voltage changes.  The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.  The four basic devices (, and ) are identical except for magnetic switch points. Each device includes a voltage regulator for operation with supply voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperature compensation circuitry, small-signal amplifier, Schmitt trigger, and an open-collector output to sink up to 25 mA.  With suitable output pull up, they can be used with bipolar or CMOS logic circuits.  The A- and A- are improved replacements for the UGN/UGS-; the A- is the improved replacement for the UGN/UGS-. True solid state Operates with stationary input (zero speed) No moving parts Logic compatible input and output Highly repeatable operation Immune to dirt In the Hall-effect sensor on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection. Technical parameters: 4.5 V to 24 V Operation Needs Only An Unregulated Supply Open-Collector 25 mA Output Compatible with Digital Logic High speed operation - over 100 kHz possible Broad temperature range (-40 to +150°C) PIN-OUT DIAGRAM: Package Includes: 1 Piece new  HALL Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This is a breakout board for Freescale’s MMAL three-axis analog MEMS accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices. Two selectable measuring ranges (±1.5g, ±6g) Breadboard friendly - 0.1" pitch header Low current consumption: 400 µA Sleep mode: 3 µA This breadboard friendly board breaks out every pin of the MMAL to a 9-pin, 0.1" pitch header. The sensor works on power between 2.2 and 3.6VDC (3.3V optimal), and typically consumes just 400µA of current. All three axes have their own analog output. Technical parameters: Voltage Range- DV Static Current- Output Level- High 3.3 V /Low 0V Working Temperature- -  deg   Package Includes: 1 Piece new  MMA  Accellerometer Module 3 Axis  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description An experimental passive infrared system was designed and developed to detect and monitor vehicular road traffic. The system uses infrared pyroelectric sensors to sense vehicles passing through its field of view. In conjunction with computerized signal processing and correlation techniques the sensor information can then be used to count the number of vehicles passing and compute their speed and length. Has signal output indication Sigle-way signal output High output when has obstructions (LED off), low output when no obstructions (LED lights) Sensitivity is not adjustable Can be used to Workpiece count and Motor speed detect Laboratory and field tests results indicate that this technology should be cost effective, weather resistant and have the potential for a variety of sophisticated traffic monitoring applications Technical parameters:   Dimension: 27.6 x 20 x 17 mm (L x W x H) Main chip: LM393, Groove coupler H, correlation type infrared head Working voltage: DC 5V   Package Includes: 1 Piece new  infrared correlation counting sensor Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description These Hall-effect switches are monolithic integrated circuits with tighter magnetic specifications, designed to operate continuously over extended temperatures to +150° C, and are more stable with both temperature and supply voltage changes.  The uni-polar switching characteristic makes these devices ideal for use with a simple bar or rod magnet.  The four basic devices (3141, 3142, 3143, and 3144) are identical except for magnetic switch points. Each device includes a voltage regulator for operation with supply voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperature compensation circuitry, small-signal amplifier, Schmitt trigger, and an open-collector output to sink up to 25 mA.  With suitable output pull up, they can be used with bipolar or CMOS logic circuits.  The A3141- and A3142- are improved replacements for the UGN/UGS3140-; the A3144- is the improved replacement for the UGN/UGS3120-. True solid state Operates with stationary input (zero speed) No moving parts Logic compatible input and output Highly repeatable operation Immune to dirt In the Hall-effect sensor on-board signal output, the output signal is effective instruction low level and at the same time, the output signal lights out can be directly and single-chip microcomputer IO connection. Technical parameters: 4.5 V to 24 V Operation Needs Only An Unregulated Supply Open-Collector 25 mA Output Compatible with Digital Logic High speed operation - over 100 kHz possible Broad temperature range (-40 to +150°C) PIN-OUT DIAGRAM: Package Includes: 1 Piece new  HALL Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This is a breakout board for Freescale’s MMA7361L three-axis analog MEMS accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices. Two selectable measuring ranges (±1.5g, ±6g) Breadboard friendly - 0.1" pitch header Low current consumption: 400 µA Sleep mode: 3 µA This breadboard friendly board breaks out every pin of the MMA7361L to a 9-pin, 0.1" pitch header. The sensor works on power between 2.2 and 3.6VDC (3.3V optimal), and typically consumes just 400µA of current. All three axes have their own analog output. Technical parameters: Voltage Range- 4.5-20DV Static Current- Output Level- High 3.3 V /Low 0V Working Temperature- -15-+70  deg   Package Includes: 1 Piece new  MMA7361  Accellerometer Module 3 Axis  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258   between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  Laser Sensor Module  For Arduino and other MCU It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  Digital Light Sensor Intensity Seek Module Photoresistor For Arduino It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Package Includes: 1 Piece new  MP135 AIR POLLUTION SENSOR DIP-4 Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Basic parameters:     Appearance Comply with the design External dimensions and the content is consistent with the provisions of said procedures approved drawings and technical documents. Installation with a good, permanent traffic direction signs. No significant surface cracks, bumps, burrs and deformation and other defects. Wiring mechanical strength ≥ 30N / any direction Rally pull one end of the line with the applied force at any 1min/30N slow, loose wiring can not have now ? Frog ? Flow characteristics F = (7.5 * Q) ≤ 2% error In the inlet end of the water flow sensor applied 2 ~ 12L/min flow, the output frequency characteristics should meet the standard requirements, where F is the frequency

Description Technical parameters:   Package Includes: 1 Piece new  MQ-8 Hydrogen Gas Detection Sensor Detector Module for Arduino AVR  Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  Sound Detection sensor Module / Intelligent Vehicle Microphone Arduino smart car It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is V (5 V / ), and the input voltage of this module should be more than V x V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC V-25 V Voltage analog resolution: V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  TTP Channel Digital Touch Sensor Module / Capacitive Touch Switch button It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91  between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  Float level switch, Water level sensor, for Water Level Controller It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  small microphone sound sensor module It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  HX711 module/precision weighing sensor dedicated 24 AD module It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  Metal touch sensor module for AVR and other MCU  KG183 It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  by PhraseFinder" style="border: none !important; display: inline-block !important; text-indent: 0px !important; float: none !important; font-weight: bold !important; height: auto !important; margin: 0px !important; min-height: 0px !important; min-width: 0px !important; padding: 0px !important; text-transform: uppercase !important; text-decoration: underline !important; vertical-align: baseline !important; width: auto !important; background: transparent !important;"> Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description Package Includes: 1 Piece new  DS18B20 Temprature sensor module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91    between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

Description This module is based on resistance point's pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V (if for 3.3 V system, the input voltage should be not more than 3.3 V x 5 = 16.5 V). Instructions with the signal output Current wide detection range:DC0-25V input Current detection resolution: DC0-25V input Output over or under voltage indicator Over or under voltage signal set point is adjustable,set the resolution 0.2V Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 0.00489 V (5 V / 1023), and the input voltage of this module should be more than 0.00489 V x 5 = 0.02445 V. Technical parameters: Voltage input range: DC0-25 V Voltage detection range: DC0.02445 V-25 V Voltage analog resolution: 0.00489 V DC input interface: red terminal positive with VCC, negative with GND   Package Includes: 1 Piece new  Voltage Detection Sensor Module Module can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Description Package Includes: 1 Piece new  Sound Detection sensor Module / Intelligent Vehicle Microphone Arduino smart car It can be used with Arduino, Mbed, ARM or any other MCU Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  sales@KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9560773418 between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order