Mega compatible

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED Contact us for Special Price if you want to buy more than 5Pieces of this item Item description: Compared to the old version, R3 version major changes: Atmega 16U2 chip alternative 8U2. Means a higher transfer rate and memory. without having to install the driver

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE If you want  3.2'' TFT Touch Shield for Mega compatible please Click Here Item description: Compared to the old version, R3 version major changes: Atmega 16U2 chip alternative 8U2. Means a higher transfer rate and memory. without having to install the driver

Mega R3 Compatiable Microcontroller Board ATmega USB Cable of Arduino This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality.  100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

This MEGA BOARD is a 100% compatible derivative of current R3 Arduino MEGA This is an Arduino Clone based on current open source hardware We are not affiliated with Arduino.cc IMPORTED HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Buy Original Arduino UNO R3 from  http://store.arduino.cc/index.php?main_page=product_info&cPath=11&products_id=195 Download Arduino IDE & Drivers:  http://arduino.cc/en/Main/Software No need to install any additional driver

This MEGA is a 100% compatible derivative of current R3 Arduino Mega Note: This is Clone Board Mega AU (16 Mhz) R3 Board Highest Quality. 100% Arduino-Compatible. Product Technical Specification Microcontroller ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

TEST Mega.Vision       PRODUCT IMAGE / PICTURE SPECIFICATIONS Condition Replacement | Compatible Laptop Hinges Product Type Replacement | Compatible Hinges Brand Generic Quality Top | Best Quantity 1 Set (Left & Right) Color As Per Picture In The Box Laptop LCD Hinges Set

3.2'' TFT LCD Touch Shield for Arduino Mega compatible HIGH QUALITY FAST SHIPPING WITHIN 3-7 WORKING DAYS 100% TESTED & SATISFACTION GUARANTEED CASH ON DELIVERY AVAILABLE Overview Arduino 3.2" TFT LCD Touch shield is an Arduino Mega compatible multicolored TFT display with touch-screen and SD card socket. It is available

Mega.Vision       PRODUCT IMAGE / PICTURE SPECIFICATIONS Condition New Replacement | Compatible Laptop Ac Adapter Product Type Replacement | Compatible Charger Brand Generic Output DC Volts 19V Output DC Amps 4.74A Output DC Watts 90W Pin | Tip Size 5.5MM x 2.5MM Color Black Warranty 3 Months Warranty on Manufacturing Defects In The Box Adapter & Power Cord

Mega.Vision       PRODUCT IMAGE / PICTURE SPECIFICATIONS Condition New Replacement | Compatible Laptop Ac Adapter Product Type Replacement | Compatible Charger Brand Generic Output DC Volts 19V Output DC Amps 3.42A Output DC Watts 65W Pin | Tip Size 5.5MM x 2.5MM Color Black Warranty 3 Months Warranty on Manufacturing Defects In The Box Adapter & Power Cord

Mega.Vision       PRODUCT IMAGE / PICTURE SPECIFICATIONS Condition Brand New Replacement | Compatible Laptop Battery Product Type Replacement | Compatible Battery Brand Generic Battery Type Lithium-ion Voltage 11.1V Capacity MAH Component 6 Cells Color Black Warranty 6 Months Warranty on Manufacturing Defects In The Box Battery

TFT LCD touchscreen display Mega shield v2.2 for arduino mega r3 TFT '' touch LCD Shield for Arduino Due/Mega Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.   Product Description: ·         The TFT01 LCD module works at 3.3V voltage and it's not compatible with Arduino MEGA pins, here`s a solution, ·         A shield for Arduino MEGA. Now user can directly plug the TFT01

TFT LCD touchscreen display Mega shield v2.2 for arduino mega r3     Product Description: v   The TFT01 LCD module works at 3.3V voltage and it's not compatible with Arduino MEGA pins, here`s a solution, v   A shield for Arduino MEGA. Now user can directly plug the TFT01

Arduino Mega R3 compatible board Arduino Clone based on current open source hardware Product Summary: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz Features: v   Completely solved the traditional board that is not compatible with win7 and win8. v   Increased the pin socket, to facilitate the use of DuPont line cables. v   Replaced Atmega16u2 with CH340G which can easily communicate to Arduino IDE directly.                 Package Include: v   One piece of Arduino Mega board v   One USB cable v   A plastic container box. Shipping Details: Our preferred shipping partners are                             For remote locations we will prefer Indian speed post Feedback v     In case you find any problem

Sensor Shield V2.0 for Arduino MEGA R IIC Bluetooth LCD SD IO + Free 30 piece Dupont cables worth Rs.% compatible with Arduino mega   Product Summary: Arduino mega sensor shield V2.0 is easy for Arduino fans to plug and play with. For some Arduino starters, it is difficult to add circuits on Arduino, so this sensor expansion board which can connect most senor shields to Arduino control panel solves the problem easily. It meets the expansion needs of most Arduino. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer Specifications: Dimensions 3.94

W ethernet shield for arduino UNO mega with micro SD slot Ethernet shield w for uno mega diecimila duemilanove Order multiple quantity or multiple items from 4d_innovations to save on shipping cost.     Product Summary arduino w:   The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W Ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.     Description arduino Ethernet w:             The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top             The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

Sensor Shield V2.0 for Arduino MEGA R IIC Bluetooth LCD SD IO + Free 30 piece Dupont cables worth Rs.% compatible with Arduino mega   Product Summary sensor shield v2.0:   Arduino mega sensor shield V2.0 is easy for Arduino fans to plug and play with. For some Arduino starters, it is difficult to add circuits on Arduino, so this sensor expansion board which can connect most senor shields to Arduino control panel solves the problem easily. It meets the expansion needs of most Arduino. Arduino is an open-source physical computing platform based on a simple i/o board and a development environment. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer   Specifications: Dimensions 3.94

Ardupilot Mega  (APM) is a professional quality IMU autopilot that is based on the Arduino Mega platform.  This autopilot can control fixed-wing aircraft, multi-rotor helicopters, as well as traditional helicopters.  It is a full autopilot capable for autonomous stabilisation, way-point based navigation and two way telemetry with Xbee wireless modules.  Supporting 8 RC channels with 4 serial ports.    APM Features Free open source autopilot firmware that supports planes, multicopters (tri, quad, hex, oct, etc), traditional helicopters and ground rovers! Simple setup process and firmware loading via a point-and-click utility. No programming required! (But if you do want to fiddle with the code, you can with the easiest embedded programming toolkit available: Arduino) Full mission scripting with point-and-click desktop utilities Can support hundreds of 3D waypoints Two-way telemetry and in-flight command using the powerful MAVLink protocol Choice of free Ground Stations, including the state-of-the-art  HK GCS, which includes mission planning, in-air parameter setting, on-board video display, voice synthesis, and full datalogging with replay. Autonomous takeoff, landing and special action commands such as video and camera controls Supports full "hardware-in-the-loop" simulation with Xplane and Flight Gear 4MB of onboard data-logging memory. Missions are automatically datalogged and can be exported to KML Built-in hardware failsafe processor, can return-to-launch on radio loss.   Powerful Ground Control Software The ArduPilot Mega Mission Planner allows you to easily plan mission, or upload new firmware with only a few clicks of the mouse, enabling any user to easily get started. With the addition of a  Telemetry Kit,  you can track your UAV

W ethernet shield for arduino UNO mega with micro SD slot Ethernet shield w for uno mega diecimila duemilanove     Product Summary arduino w:   The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W Ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield.     Description arduino Ethernet w:               The Ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top               The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

Description The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming in Arduino ). An SD card library is not yet included in the standard Arduino distribution. Arduino communicates with both the W and SD card using the SPI bus (through the ICSP header). This is on digital pins , and 13 on the Duemilanove and pins , and 52 on the Mega. On both boards, pin 10 is used to select the W and pin 4 for the SD card. These pins cannot be used for general i/o. On the Mega, the hardware SS pin, 53, is not used to select either the W or the SD card, but it must be kept as an output or the SPI interface won't work. Note that because the W and SD card share the SPI bus, only one can be active at a time. If you are using both peripherals in your program, this should be taken care of by the corresponding libraries. If you're not using one of the peripherals in your program, however, you'll need to explicitly deselect it. To do this with the SD card, set pin 4 as an output and write a high to it. For the W, set digital pin 10 as a high output. The shield provides a standard RJ45 ethernet jack. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

1 Piece Arduino Mega R3 Compatible (Clone) USB Board - ATmega CH340 with USB Cable Order more than one piece to save shipping cost. You can contact us at +91- for any question or concern. Device Details This device and other listings with words 'Compatible' and 'Developement'

Description Wiznet W Ethernet Shield for Arduino Uno & Mega with SD card slot                                      Description: Description: The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip providing a network (IP) stack capable of both TCP and UDP. The Arduino Ethernet Shield supports up to four simultaneous socket connections. Use the  Ethernet library  to write sketches which connect to the internet using the shield. The ethernet shield connects to an  Arduino board  using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.. The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino UNO and Mega (using the Ethernet library coming

Arduino sensor shield V5.0 for arduino MEGA UNO DUEMILANOVE. + Free 15 piece Dupont cables worth Rs.90 Description sensor shield V5.0: ·         This is an Arduino Uno, mega, duemilanove compatible sensor shield that allows you to plug sensor modules into the Arduino through the shield just like Lego blocks. The board has different pin groupings for the different types of connections that it supports. The last picture of the gallery explains the connections available. This shield will simplify all of your sensing projects by creating a platform on the Arduino that the sensors can plug into without using a breadboard and discrete components. ·         Dimensions: Depth 57mm, Height 19mm, Width 57mm ·         Weight:25g   Summary: ·         I2C interface ·         Bluetooth module communication interface ·         SD card module communication interface ·         APC220 wireless RF modules communication interface ·         RB URF V1.1 ultrasonic sensors interface ·         LCD serial and parallel interface ·         32 servo controller interface Package Include: ·         1 x sensor shield V5.0 ·         5 x Dupont female to female cables. ·         5 x Dupont male to female cables. ·         5 x Dupont male to male cables. ·         A plastic container box.   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 3.3 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

Arduino MEGA UNO Based HC05 Bluetooth Module: Description: This module can be set to a transmitter or receiver, transmitter could pairing with receiver, receiver and receiver or transmitter and transmitter can't communication between, receiver could pairing with computers and cell phone bluetooth, when buying, the default for receiver.   1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.       3. Module working voltage 5 V.       4. Potter default rate of , the user can be set up.       5. The core module size: 28 mm x 15 mm x 2.35 mm.       6. Working current: matching for 30 MA, matching the communication for 8 MA.       7. Dormancy current: no dormancy.       8. Used for GPS navigation system, water and electricity gas meter reading system.       9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Works with any USB Bluetooth adapter. Easy to use and completely encapsulated. This module includes key interface and state interface compared with Smart Bluetooth Module Baseboard. The Bluetooth Module Baseboard can be compatible with master mode,slave mode and both master-slave mode. Works for Bluetooth TTL transceiver module which allows your target device to both send or receive the TTL data. The key interface on the baseboard is the master mode button and can be controlled by high level from external MCU, then this module will search again automatically. This module power supply input is 3.6~6V, Please be careful that it should be not more than 7V. The STATE interface on the baseboard is interface for LED STATE output feet, when bluetooth module don't not connected with other device and then output pulse, when bluetooth module connected with other device and then output high level, and the MCU will judge the state, then this module will search again automatically. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it, external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply       We advise to install "Bluetooth master module"       The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse"; when bluetooth "connected", output "High level", we can determine the states from "MCU"       If only the board, No any "Bluetooth Function  ____________________________________________________________________________________________________________________________________ Package includes: 1 x Interface Base Board Module For Further Details: Email:

3.2'' TFT LCD 240x400 HD Touch Shield compatible with Arduino Mega Software driver Library AVR included. Product Summary: 3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. 3.2” Diagonal display 240x400 Display size 3.2” diagonal LCD type TFT   transmissive LCD TFT resolution 240x400 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC HXA Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm               Features: v   240x400 pixels screen resolution. v   Specially designed adaptor PCB for display and touchscreen which include SD card slot v   Arduino supported, can be driven by Arduino, AVR, PIC, STM32 and most bits MCUs. v   supported by UTFT library which can directly drive LCD with arduino mega card v   Powerful   HXA controller with 240x400 screen resolution.     Package Include: v   A 3.2” LCD TFT 240x400 touchscreen display attached adaptor PCB with SD slot. v   A plastic container box. v   A stand-alone software library(ATmega32)-zip file via e-mail.   Shipping Details: Our preferred shipping partners are                              Indian speed post Testimonial s: v     we never dispatch even a single product without testing at our facility, watch what our customers say about us at our feedback profile Feedback v     In case you find any problem

Arduino Mega R3 compatible board BEST QUALITY AMONGST ALL OTHER ARDUINO CLONES AVAILABLE Arduino Clone based on current open source hardware   Product Description: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16  MHz

Arduino Mega R3 compatible board Arduino Clone based on current open source hardware Product Summary: ATmega Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz

Sony Alpha ZV-E10 24.2 Mega Pixel Interchangeable-Lens Mirrorless vlog Camera, Made for Creators (APS-C Sensor, Advanced Autofocus, Clear Audio, 4K Movie Recording) Body Only Black, Optical Zoom Selling Price- 44,999/- Working and call timings MONDAY TO SATURDAY 10:00 am to 7:00pm Location My Gadget Cart, KH No. 148, Sector 8, Opp to CRPF Camp, Dwarka, New Delhi - 110077 Google Maps - My Gadget Cart for location Prices Non-Negotiable ** Brand New Open Box with GST Bill ** About this item :- Large APS-C type 24.2-megapixel28 Exmor CMOS sensor Directional 3-Capsule Mic supplied with wind screen Features designed for vloggers—Product Showcase Setting, Bokeh Switch, Still/Movie/S&Q button; Flexible connectivity for easy sharing Compatible Mountings: Sony E

3.2'' TFT LCD 240x400 HD Touch Shield compatible with Arduino Mega Software driver Library AVR included. Order multiple quantity or multiple items from 4d_innovations to save on shipping cost. Product Summary:       3.2” LCD TFT touch screen display for ARDUINO, AVR, PIC with SD card slot. 3.2” Diagonal display 240x400 Display size 3.2” diagonal LCD type TFT  transmissive LCD TFT resolution 240x400 pixels Module power 344mW consumption Colors: 262k Backlight type LED Driver IC HXA Interface type System Parallel interface Weight 52gms dimension Active Area(W x H):xmm Glass Area(W x H):xmm

Overview The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards