Motor mount

This is the Motor Mount for the Flyzone Switch. FEATURES: Plywood construction fully assembled INCLUDES: Motor Mount and two Magnets for canopy attachment.

Original Replacement Motor Mount for the Atomik Barbwire RTR RC Boat. Brought to you by Atomik RC your one stop online RC Shop.

Atomik RC replacement Motor Mount Set for the Tacon Thriller 1 14 RC Short Course Truck. Same Original Equipment Manufacture (OEM) high quality replacement parts at a reduced price.

BLDC Motor KV.Built with high-end magnets, a high pole count and custom motor mount, this motor is designed purely for multi-rotor applications. This  includes an integrated prop adaptor for use with many different style props featuring a 4mm shaft and adaptor sleeves for 5mm/6mm props. It also has an in-built aluminum mount for quick and easy installation on your quadcopter frame. This is not a modified airplane outrunner. It was designed from the ground up specifically for multi-rotor applications. Specifications - Stator dia (mm) - 22 Stator length (mm) - 13 Stator arms - 12 Magnet Poles - 14 RPM (kv) - Idle Current (A) - Max Current (A) - 20 Max Power (w) - Biggest Thrust (g/s) - Rotor dia (mm) - 28 Shaft dia (mm) - 3.17 Motor length (mm) - 28 Overall Length (mm) - 42 Package Contents - 1x brushless motor 1x adapter for shaft 1x mount

The Cobra series motors have a 1 8 inch (3.17mm) shaft for extra strength as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.Included with every Cobra Series Motor is a complete accessory package which contains the following items: # Heavy Duty 3mm Thick Cross Style Motor Mount # Four M3x6mm Motor Mount Screws # Bolt-On style theaded prop adapter with 3 screws # Retaining Collar with Set Screw # Three female 3.5mm bullet connectors # Three pieces of heat-shrink tubingCobra C- Motor SpecificationsStator Diameter: 22.0 mm ( in)Stator Thickness: 13 mm ( in)Number of Stator Slots: 12Number of Magnet Poles: 14Motor Wind: 26 Turn DeltaMotor Kv Value: 950 RPM per VoltNo Load Current (Io): 0.45 Amps @ 8 VoltsMotor Resistance (Rm) per Phase: OhmsMotor Resistance (Rm) Phase to Phase: OhmsMaximum Continuous Current: 14 AmpsMax Continuous Power (3-cell Li-Po): 150 WattsMotor Weight: 61.0 grams (2.15 oz.)Outside Diameter: 27.7 mm ( in.)Shaft Diameter: 3.17 mm ( in.)Motor Body Length: 28.0 mm ( in.)Overall Shaft Length: 42.0 mm ( in.)Motor Timing: 5-10 degreesPWM Frequency: 8kHz

Specifications: - AKV - RPM/V: - No. Of cells: 5-7Ni-MH/2-3Li-Po - Max. efficiency current:14A (>72%) - NoLoad current:11.1 V  1.4 A - Current capacity :32 A/ 60 s - Max. efficiency:0.75 - Shaft diameter (mm): 3.17 mm - Weight with cables:  48g - Internal Resistance: 45 mΩ - Dimensions(mm):27.5x30mm Comes with Prop adapter, Motor Mount and 4 screws; exactly as shown

This motor will provide clean and efficient power for your large scale aircraft without the mess and hassle of nitro fuel. When combined with a 3s Lipoly battery, 10X6" Propeller and a 25Amp ESC this motor will supply punchy, responsive power that only an electric setup can provide. This motor is suited for Planes and Quadrotors as It can be mounted

Specifications:KV: kv Shaft:3.17mm Voltage: 2S~3S (7.4v to 11.1v) Weight: 50g Power: 342w *3.5mmMale Bullet connectors installed and comes with mount and Spinner.

4x XXD T Kv Brush less Out runner Motor For RC Aircrafts, Multicopter. Specification: Name: XXD T - Kv Brush less Out runner Motor. Motor for  fixed-wing, Multi copter. Motor for ESC 20A - 30A. Motor for propeller. RC Pull weight: 300g - 900g. Note: RC Pull weight Depends on Battery and propeller used. No load current / 10V: 0.4A. Number of battery(Ni-MH): 6-10 Ni-MH/ 2-4S Li-Po. Current capacity: 12A / 60s. Max efficiency: 80%. Size:  27.8mm x 40mm. weight: 47g. Package: 4 x 100% Brand New XXD -KV Brush less Out runner Motor. 4 x 100% Brand New Aluminum prop adapter. 4 x 100% Brand New Cross type motor mount. 16 x 100% Brand New M3 Screws. NO Retail Box. Packed Safely

This is the Fuselage for the Great Planes Giant 50cc Revolver Airplane GPMA. FEATURES: Balsa and ply construction with assembled plywood motor mount Covered

Recommended Setup Motor  HKV  HKV ESC 10A ESC 12A ESC Propeller:  5inch or 6inch Radio & Receiver:  4CH or More Flight Controller CC3D Flip32  or  Flip32+ APM Mini KK 2.1  etc.. Battery: 3S or 4S mAh - mAh Specification Frame Weight: Approx 102g FC Mounting Hole: There is no default mounting holes for flight controller so you need to make the holes by yourself.  Battery Strap Gap: 20mm @ M3 Front Servo Mount: 23.5x13.5mm Suitable for servos eg. SG90, MG90S etc... size servos Motor Mounting: M Suitable) Package 1 x RCX FPV260 Quad Copter A Mini Sized FPV Multi-Rotor (Barebone / Nylon Material) 1 x Set of Screw

The most recent electric versions of the e-Rustler e-Stampede Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. RPM Gear Covers for the electric versions of the Traxxas Stampede Rustler Bandit and Slash are sold

Brushless motor+ESC +(CCW & CW)propeller+gold connector+Prop adapter  combo is the work horse for you. This tough-as-rawhide motor features a heavy duty mount, a 4mm shaft and self oiling bushings that just wont give up like some of the bearings

This kit is designed to get you started quickly and easily on your path of learning electronics. Once you've received your starter pack you can start to play with little or no electronics and programming experience. The advanced kit has more components and sensors you need to play compared with the Starter Kit. Kit Content:   RoboWar Kit Using ARDUINO UNO S No. Product Name QTY. 1 Arduino Uno 1 2 Robosapiens 4'' DOUBLE WHITE SCREW MOUNT TYRE RPM Center Shaft Metal Gear 4 4 High Current Dual DC Motor Driver Board 1 5 Robosapiens Super Jumbo Chasis 1

Note: This is a clone of original and its approved by DIYDRONES themselves. This is APM 2.6 (compass not on board) The ArduPilot Mega 2.52 is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility

ArduPilot Mega APM 2.6 The ArduPilot Mega 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.   This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility

Introduction: This is the new APM 2.6 autopilot module. The sensors are exactly the same as with APM2.5+, however this version does not have an onboard compass, which makes this version ideal for use with multicopters and rovers. The APM 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. Available with top or side connectors. This revision of the board has no onboard compass, which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it's often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.6 gives more flexibility