Neewer 4ghz wireless flash

Neewer 3-IN-1 2.4GHz Wireless Flash Trigger for Nikon D90, D600, D, D, D, D, D, D Description: Neewer FC-240 is using FSK 2.4GHz wirelesschannels which can be suitable

Neewer 3-IN-1 2.4GHz Wireless Flash Trigger for Canon 1D Series, 5D, 5DII, 5DIII, 7D, 10D, 20D, 30D, 40D, 50D Neewer FC-240 is using FSK 2.4GHzwireless channels which can be suitable

Neewer RF-604 X1-N RX Wireless Flash Trigger for Nikon D800 D700 D600 D300 D3X Features: Using global free 2.4GHz channel and FSK modulation system, and there's 15 selectable frequency channels. Flash sync speed is up to s. Support the flashgun wake-up function; you'll never miss any shot opportunity. (Wake up can only used

Neewer 2.4GHz Wireless Microphone BY-WM5 IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer 433MHz Wireless 16 Channel Flash Remote Trigger with Receiver for TT850, TT860 Speedlite and Godox V850, V860 Speedlite Product Features Set power ratios of up to 16 groups of remote flashes Switch the on-or-off of the modeling light or AF-assist beam& buzzer Manual triggering of flashes Two modes of power ratio display Quite convenience to mount onto your camera's hot shoe Description Features: Set power ratios of up to 16 groups of remote flashes; Switch the on-or-off of the modeling light or AF-assist beam& buzzer; Manual triggering of flashes; Two modes of power ratio display; Quite convenience to mount onto your camera's hot shoe Specifications: 16 Channels 16 groups of remote flashes Max. synchronize speed: sec LCD Monitor 433 MHz WIRELESS Transmission Remote distance: 50 m (in clear area) Trigger + receiver set Suitable for: NEEWER TT850 TT860 SPEEDLITE Package Contents: 1x WIRELESS flash trigger 1x receiver Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer FC-5P Hot Shoe Adapter Wireless Flash Controller for Canon Nikon Olympus Pentax Based on the photoelectric principle masterflash can remote the slave flash which connects on this item and achieve syncflash. This Flash Hot Shoe Adapter willassist you to achieve your desired shooting effect. With small volume,good-looking exterior and reliable performance for long-term use, it providesconvenience for photographers. It is lightweight for easy carry. With favorableprice, it will be good choice for each economical shopper who doesn't compriseon the quality. Action is better than excitement! Don't hesitate to bring ithome now! andnbsp; Specification: Remote distance: Master flash GN/2 meter Output port: Standard hotshoe adapter PCsync terminal Input port: Camera standard hot shoe adapter IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer 433MHz Wireless 16 Channel Flash Remote Trigger with Receiver for TT850, TT860 Speedlite and Godox V850, V860 Speedlite Features: Set power ratios of up to 16 groups ofremote flashes; Switch the on-or-off of the modeling lightor AF-assist beamandamp; buzzer; Manual triggering of flashes; Two modes of power ratio display; Quite convenience to mount onto your camera'shot shoe Specifications: 16 Channels 16 groups of remote flashes Max. synchronize speed: sec LCD Monitor 433 MHz WIRELESS Transmission Remote distance: 50 m (in clear area) Trigger + receiver set Suitable for: Neewer TT850 SPEEDLITE IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer® Photo Studio Flash Speedlite Accessories Kit, Includes: (1)Multifunctional 16xx40cm Softbox, (1)S-type Flash Bracket Mount, (1)Carrying Case, (1)4 Channel Wireless Remote FM Radio Trigger,(1)2.5mm PC Receiver, (1)Retractable Waist DSLR Rig Support Rod and Belt with 3/8" Screw for Canon 580EX, Nikon SB900, Neewer TT860, TT850, TT560, YN560 III, YN560 II, YN560 I, Olympus, Pentax, Sigma, Sunpak, Vivitar 285HV and Other Flash Units with Universal Hot Shoe Product Features The remarkable S-type Speedlite mount presented by Neewer would let you enjoy your filming

Neewer FA-1S Flash hot shoe adapter for Sony NEX-3, Nex-C3, Nex-F3, NEX-5, NEX-5N 5R and other SONY NEX Camera Series Neewer FA-1S hotshoe adapter is designedfor use with the SONY NEX cameras inbuilt Smart Accessory Terminal. Thisadapter enable users to attach any wireless trigger system or flash unit ontothe SONY NEX cameras. This Flash Hot Shoe Adapter will assist youto achieve your desired shooting effect. With small volume, good-lookingexterior and reliable performance for long-term use, it provides conveniencefor photographers. It is lightweight for easy carry. With favorable price, itwill be good choice for each economical shopper who doesn't comprise on thequality. Action is better than excitement! Don't hesitate to bring it home now! The hotshoe mount is designed to fire your flashes with a proper radio trigger attached. While it is possible to attach a flash unit directly onto the hotshoe, it is not recommended as the weight of the flash may not be fully supported by the mount. Suitable for: SONY NEX Camera,such as Sony NEX-3, Nex-C3, Nex-F3, NEX-5, NEX-5N 5R etc. Note: If it is used

Yongnuo 2.4GHz wireless manual Speedlite flash YN560 IV Wireless Transceiver Integrated   Fantastic with Three Controlling Groups                                 ----Yongnuo 2.4GHz Speedlite YN560 IV   *Supports Wireless Master Function  The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III.    *Supports Wireless Slave Function, fully supports YN560-TX、RF-603（I/II）、RF-602 Wireless transmitter  One YN560 IV can respectively receive the wireless signal from YN560 IV、YN560-TX、RF-603 (I/II)、RF-602,with optional 16 channels; when the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings.    *Multiple Trigger Synchronous Mode Supported  The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode.    *Settings Save Automatically, Supports Custom Settings (Fn) The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed.   *GN58 @ ISOmm High Guide Number 2.4G wireless speedlite, supports M/Multi/-- mode.    *Sound Prompting System When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting.   *Support Electric Zooming Function  The flash coverage can be altered between mm through the [ZOOM] button.   *Ultrafast Charging Recycle System, Supports External Power Supply    *Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface

YONGNUO RF605C RF 605C RF605 C Wireless Flash Trigger for Canon upgrade version of RF-603II Compatible with RF-602, RF-603 and YN-560TX LCD display TX/RX/TRX multiple working ways A/B/C/D/E/F 6 groups (compatible with YN560-TX) Communication range up to 100M Product Description Features: *RF-602/RF-603 two communication modes RF605 = RF602 +RF603 *TX/RX/TRX multiple working ways *A/B/C/D/E/F 6 groups (compatible with YN560-TX) *Wireless shutter remote control *Clear LCD screen display, shortcut key operation *16 channels *Communication range up to 100M Specification: Type: FSK 2.4GHz wireless remote control system Transmission distance: 100m Channels:16 channels Group:6 Groups Shutter release: half-press, full-press Shutter interface: 2.5mm socket Studio flash light interface: standard PC socket Max Sync Speed: second Battery: AAA×2(3V) Size: 85MM x 41MM x 35MM Suitable for: - Canon 70D / 60D / 700D / 650D / 600D / 550D / 500D / 450D / 400D / 350D / 300D / D/ D / D / Canon 1D / 1DS / 5D / 6D/ 7D / 50D / 40D / 30D / 20D / 10D - Pentax K20D / K200D / K10D / K100D, - Samsung GX-20 / GX-10 Package Includes: (batteries not included) 2 X RF-605 Transceiver 1 X LS-2.5 C1 cable 1 X LS-2.5 C3 cable

Title YONGNUO RF605C RF 605C RF605 C Wireless Flash Trigger for Canon upgrade version of RF-603II Compatible with RF-602, RF-603 and YN-560TX LCD display TX/RX/TRX multiple working ways A/B/C/D/E/F 6 groups (compatible with YN560-TX) Communication range up to 100M Product Description Features: *RF-602/RF-603 two communication modes RF605 = RF602 +RF603 *TX/RX/TRX multiple working ways  *A/B/C/D/E/F 6 groups (compatible with YN560-TX) *Wireless shutter remote control *Clear LCD screen display, shortcut key operation  *16 channels *Communication range up to 100M Specification: Type: FSK 2.4GHz wireless remote control system Transmission distance: 100m Channels:16 channels Group:6 Groups Shutter release: half-press, full-press Shutter interface: 2.5mm socket Studio flash light interface: standard PC socket Max Sync Speed: second Battery: AAA×2(3V) Size: 85MM x 41MM x 35MM Suitable for: - Canon 70D / 60D / 700D / 650D / 600D / 550D / 500D / 450D / 400D / 350D / 300D / D/ D / D / Canon 1D / 1DS / 5D / 6D/ 7D / 50D / 40D / 30D / 20D / 10D  - Pentax K20D / K200D / K10D / K100D, - Samsung GX-20 / GX-10 Package Includes: (batteries not included) 2 X RF-605 Transceiver 1 X LS-2.5 C1 cable 1 X LS-2.5 C3 cable IF YOU HAVE ANY PROBLEM SO KINDLEY  PLEASE GIVE 1ST YOU INFORM ME BUT PLEASE GIVE ME POSITIVE FEEDABCK MY EMAIL ID digitalfotodeal @gmail.com or contact us   Payment. Octroi is levied

Yongnuo RF-603 II Wireless Flash Transceiver Set for Canon DSLRs   50D, 40D, 30D, 20D, 10D, 7D, 5D, 5DII, 5DIII,6D.1D The new RF-603 II is improved and fully compatible to it's predecessor. The radio trigger now has buttons at the side for selecting the mode: off, automatic detection if receiver or transmitter and receiver only. Also the mode detection is improved. A new hot shoe locking system prevents slipping off especially while mounted on other triggers. The RF-603 II is a multi-functional radio flash trigger which can be used to synchronically trigger studio lights, as well as a shutter release. Through the transceiver based system each item can be used as trigger or receiver. Only 2 AAA batteries are required as power source each item. The use of the 2.4GHz wireless frequency is suitable

Yongnuo RF-603 II Wireless Flash Transceiver Set for Canon DSLRs   60D, 70D, 650D, 550D, 500D, D, 450D, 400D, 350D, 300D The new RF-603 II is improved and fully compatible to it's predecessor. The radio trigger now has buttons at the side for selecting the mode: off, automatic detection if receiver or transmitter and receiver only. Also the mode detection is improved. A new hot shoe locking system prevents slipping off especially while mounted on other triggers. The RF-603 II is a multi-functional radio flash trigger which can be used to synchronically trigger studio lights, as well as a shutter release. Through the transceiver based system each item can be used as trigger or receiver. Only 2 AAA batteries are required as power source each item. The use of the 2.4GHz wireless frequency is suitable

Yongnuo RF-603 II N3Wireless Flash Transceiver Set for NIKON DSLRs   D90/D/D/D/D/D/D/D/D/D/D600 The new RF-603 II is improved and fully compatible to it's predecessor. The radio trigger now has buttons at the side for selecting the mode: off, automatic detection if receiver or transmitter and receiver only. Also the mode detection is improved. A new hot shoe locking system prevents slipping off especially while mounted on other triggers. The RF-603 II is a multi-functional radio flash trigger which can be used to synchronically trigger studio lights, as well as a shutter release. Through the transceiver based system each item can be used as trigger or receiver. Only 2 AAA batteries are required as power source each item. The use of the 2.4GHz wireless frequency is suitable