Neewer dslr

Neewer DSLR LCD Optical Glass Screen Protector for Canon 7D Cameras   Description: This GGS LCD screen protector is for 3.0'' LCD digital camera, which is completely different from the traditional plastic protective film. GGS LCD screen protector is using ultra thin optical glass and special processing, it is high transparency, anti-scrape, anti-bump, anti-aging and easy to install. It uses a 0.5mm ultra thin optical glass with at least 90% transmittance. It has higher transparency than other LCD screen protector. It is as hard as 8H and it can bear a heavy burden (12kg/cm2), also it can prevent from being rubbed, scraped and bumped. It is well sealed by 3M double side adhesive tape which is not easy to be unglued and easy to be installed. There is no air bubble or angle occurs during sticking on the equipment. It will not affected by the temperature and humidity. It prevents the LCD screen infracted by sweat stain, smear, acid and alkali element and prolongs the life of the screen. It can be removed and reused if the glutinosity hasn't been damaged. This LCD Screen protector fit for all 3.0'' LCD main screen digital camera. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer DSLR Dual Handle Hand Grip for Shoulder Pad Chest Steady 15mm Rail Rod Rig Support System Features: Be used with any industry standard 15mm rod rail system. The rail mounting adapter can be adjusted at desired distance on the 15mm rods. Lockable

Neewer Camera Shutter Release Wireless Remote Transmitter Receiver+7* Cable Kit Neewer DSLR Camera Shutter Release Kit 320ft/100m Wireless Timer Remote Control 2.4G 32CH Transmitter Receiver with LCD Display for Nikon, Canon, Pentax, Sony, Panasonic and Other Similar DSLR Cameras, Includes: (1) Camera Shutter Release Transmitter & Receiver +(7)Connected Cable Note: Camera is NOT included. Features: Wireless timer remote control with LCD backlight display. 2.4GHz 32 channels transmitter receiver. Operating distance can reach up to 320ft/100m. Can be used under wired or wireless circumstances. Half-pressing to auto focus; Full-pressing to trigger shutter. You can change different shutter release cable to work with different cameras. Support single shot, slow & quick shot, time-lapse, bulb setting, timer shot. Specifications: System Mode: FSK 2.4G Operation Channel: 32CH Operation Distance: 320ft/100m+ Battery: AAA Battery x 2 / CR2 x 1 Shooting Mode: Single Shot/ Slow & Quick Shot/ Time-lapse/ Bulb Setting/ Timer Shot Timer Function: Self Timer / Interval Control / Long Exposure Exposure Mode: Multi-exposure Shutter Release: Half-press / Full-press Shutter Connect Port: 2.5mm connect port Transmitter Standby: hours Receiver Standby: 400 hours Size of Transmitter: 1.3 x 0.6 x 3.9

Neewer Camera Lens Coat Camouflage Raincoat for DSLR Camera with Lens from 300mm mm or Small Lenses Up to 400mm f5.6 Neewer Camera Lens Coatandnbsp;Camouflageandnbsp;Raincoat for DSLR Camera with Lens from 300mm mm orandnbsp;Small Lenses Up to 400mm f5.6 Neewer Camera Lens Coat provides protection for your camera and lens from the elements like rain, snow, salt spray, dirt, sand and dust while allowing you easy access to the camera and lens controls. The coat is constructed from a lightweight waterproof, breathable poly tricot material. The seams are tape sealed for maximum protection. Features: Neewer Camera Lens Coat comes

Neewer DP500 Metal DSLR Rail 15mm Rod Support System with Quick Release Plate for Follow Focus Mattebox DSLR Rig System Description: High Quality DPmm Rail Rod Support with Quick-Release Plate. It can be mounted with camera/camcorder, lens, follow focus, matte box, Neewer DP500 shoulder mount support and Neewer DP500 others accessories. Features: Every part can be detached and reassembled easily as you want. Built-in Lens Support, usefully support any lens and protect your lens with the smooth contact. This Rail System has a central Tripod Mounting plate that makes a perfect balance between the camera and the front mount accessories (35mm Adapter/Matte box/Follow Focus). Quick-Release Plate With the 1/4″ screw, compatible with most DSLR/DVR The distance between the camera connect with lens holder is adjustable Made of anodized black aluminum, very durable and strong to support big camera and lens Specifications: Material: Metal Color: Blue andamp; Black Rails Length: 250mm Rails Diameter: 15mm Rails Center-to-Center Distance: 60mm Thickness of Adapters: 8mm Lens Support Size: 30 x 28 mm Tripod Mounting Plate Size: 80 x 45mm Tripod Mounting Plate Screws Thread: 1/4″ andamp; 3/8″ IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Rail Movie Making System Brand New Neewer Aluminum Alloy DSLR Rail 15mm Rod Support Baseplate with 1/4" Screw Quick Release Plate for Follow Focus Mattebox DSLR Rig System The base plate is a aluminum alloy multi-functional standard rail system that can be used for mounting DSLR Follow Focus Rig. This Rail System has a central Tripod Mounting plate that makes a perfect balance between the camera and the front mount accessories (35mm Adapter/Matte box/Follow Focus). Plate With the 1/4" screw, compatible with most DSLR/DVR. The Tripod Mounting plate with the 1/4" and 3/8" screws threads, compatible with many support and tripods. Note: 15mm Rail Rod Support ONLY, other accessories not included. Description: The base plate is a aluminum alloy multi-functional standard rail system that can be used for mounting DSLR Follow Focus Rig. This Rail System can be adjusted both side to side and back and forth. There are two camera height riser adapters support the plate. These height riser helps

Neewer® VK750 II I-TTL LCD Speedlite Flash and Off-camera Flexible TTL Flash Arm Kit for Nikon D D D D D D D D D300 D300S D700 D600 and All Other Nikon DSLR Cameras, Includes: Neewer VK750 II i-TTL Flash for Nikon + Neewer Flexible TTL Flash Arm for Nikon + Hard Flash Diffuser + Soft Flash Diffuser Product Features Powerful LCD display Flash with High Guide No. 58 / (ISO mm). Flash mode:TTL, M, MULTI, S1,S2. Flexible TTL Flash Arm maintains Full TTL Capabilities, compatibile for Nikon SLR/DSLR cameras with TTL hot shoe; all I-TTL and I-TTL II compatible flashes. TTL Felxible Arm can control the off-camera flash to work more flexible by different angels,and allows the photographer to create unique and dramatic lighting style with all free hands. Soft and hard flash diffuser spread the light to give you even illumination and reduce hard background shadows and eliminates the annoying red eye effect. Kit includes: Neewer VK750 II i-TTL Flash for Nikon + Neewer Flexible TTL Flash Arm for Nikon + Hard Flash Diffuser + Soft Flash Diffuser. Description (II i-TTL Speedlite Flash for Nikon: High GN: 58 (ISO mm) Flash mode:TTL, M, MULTI, S1,S2 Wireless trigger sensor, distance: m indoor, m outdoor Functions: PC port, Front curtain sync, Power saving mode, Sound indicator, Overheating protection, Exposure compensation, Memory function. Recycle time 3s(with 4 pcs AA alkaline cell). Vertical rotation angle: 0-90 degrees; Horizontal rotation angle: degrees Lighting times: times(AA alkaline cell used) Flash time: s-s Flash control: 8 levels of output control() Color temperature: k Power supply: 4xAA size batteries(Alkaline or Ni-MH are usable). (1)Flexible Flash Arm: 13.5inch/35cm flexible arm. Maintains Full TTL Connection. Mounts directly to your cameras hot shoe. No need for assitant and very portable. Can achieve perfect fill-in light during the shooting at any angle. Buiding

Neewer Adjustable Padded Neoprene Camera Shoulder Strap for all SLR/DSLR Camera Neewer Adjustable Padded Neoprene Camera Shoulder Strap for all SLR/DSLR Camera Features: Upgrade your SLR / DSLR with this anti-slip weight reducing neoprene camera shoulder strap  Constructed with soft neoprene with a layer of anti-slip rubber inside  The elastic neoprene strap evenly spread out the weight from the camera to reduce the stress on your shoulder  Anit-slip rubber layer inside helps you to prevent accidental slip of your expensive camera  Long, wide straps for comfortable and convenient carrying of your camera Accessory only, camera NOT included Fits all DSLR camera Specifications: Material: Neoprene Color: Black IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Black DSLR Sport Quick Release Elastic Professional Anti-slip Strap One-shouldered Camera Strap Neewer Black DSLR Sport Quick Release Elastic Professional Anti-slip Strap One-shouldered Camera Strap Features: andnbsp;andnbsp;andnbsp; This camera strap can keep both your hands remain free while you are not shooting. andnbsp;andnbsp;andnbsp; Equipped with a mounting screw which can ensure security for your camera. andnbsp;andnbsp;andnbsp; Ergonomic, elastic and lightweight design better eliminates shoulder fatigue, strain and tension. andnbsp;andnbsp;andnbsp; Long, wide straps for comfortable and convenient carrying of your camera andnbsp;andnbsp;andnbsp; Elastic strap design is suitable for sports and outdoor activities such as walking, running or cycling with unbeatable comfort and maximum safety for the equipment. Specifitions: Compatible with all DSLR camera. Color: black Material: nylon IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer DP500II DSLR Rail 15mm Rod Support System with Quick Release Plate Description: High Quality Neewer DPmm Rail Rod Support. It can be mounted with camera/camcorder, lens, follow focus, matte box, Neewer DP500 shoulder mount support and Neewer DP500 others accessories.   Features: 100% brand new and high quality and cheap Every part can be detached and reassembled easily as you want Built-in Lens Support, usefully support any lens and protect your lens with the smooth contact This Rail System has a central Tripod Mounting plate that makes a perfect balance between the camera and the front mount accessories (35mm Adapter/Matte box/Follow Focus). The distance between the camera connect with lens holder is adjustable Made of anodized black aluminum, very durable and strong to support big camera and lens Specifications: Material: Metal Color: Blue & Black Rails Length: 250mm Rails Diameter: 15mm Rails Center-to-Center Distance: 60mm Thickness of Adapters: 8mm Lens Support Size: 30 x 28 mm Tripod Mounting Plate Size: 80 x 45mm Tripod Mounting Plate Screws Thread: ″ IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Retractable Waist DSLR Rig Support Rod and Belt with 3/8/ Screw fit Shoulder Mount Video Camcorder Camera DV/DSLR" Features: This DSLR rig support rod contains support rod and belt. DSLR Rig Support Rod/ Belt fit Shoulder Mount Video Camcorder Camera DV/DSLR Greatly convenient for photographer shoot outdoor. It is suitable for different kinds of HD photography kit as it has a standard 3/8" screw. The design of dual damping spring helps to absorb shock, you will have a more stable and enjoyable shooting experience. Specifications: Material: Metal Color: Black Extended Length: cm Telescopic length: cm Screw Thread: 3/8" Max Load: About 10kg Note: DSLR Rig Support Rod and Belt ONLY, Camera and other accessories not included. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer DP500 Slot Slide Block 15mm Rod for Follow Focus DSLR Rig System Description: High Quality Neewer DP500 Slide Block for Follow Focus is compatible with industry standard 15 mm Rods and can support all DSLR cameras and camcorder. This slot slider block is a necessary part for DSLR follow focus. Easy to install and take off. Made of anodized black aluminum, very durable Specification: Material: completely metal Color: Black and Blue. Mounts with 15 mm Rod Support Rail Center to Center Difference: 60mm Size (approx.): 120 x 30 x30 mm Weight: 2. 82 oz IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer 5 Center Pinch Lens Gap(52mm)+5Cap Keeper Leash+Cleaning Cloth Neewer 52MM Camera Lens Cap Kit for NIKON D D D D D D D D D D DSLR Cameras, Kit includes: (5)52mm Center Pinch Lens Caps + (5)Cap Keeper Leashes  + (1)Microfiber Cleaning Cloth Bullet Points: Kit includes: (5)52mm Center Pinch Lens Caps + (5)Cap Keeper Leashes  + (1)Microfiber Cleaning Cloth. Also compatible with the PENTAX (K-30 K-50 K-5 K-5 II) DSLR Cameras. mm F AL zoom Lens. Also compatible with the Canon EF 50mm f/1.8 II and the EOS M Compact System Mirrorless Camera EF-M mm IS STM zoom lenses. The camera lens cap is great for protecting your digital camera/camcorder lens. Protect the front portions of your lens from water, dust and scratches. The lens keeper leash works with all types of lens caps: center-pinch and snap-on. The cleaning cloth is safe for all surfaces and lenses. Leave zero scratches, streaks or marks. (5)52mm Center Pinch Lens Cap: Fit any lens with a 52mm filter thread manual or autofocus, digital or film. Easy to use. Simply pinch the center to quickly attach to the front of your camera lens. Also attach to filters, adapters, and lenses with or without hoods. Protect your delicate lens from dust, dirt, and scratches. Made of high impact plastic for extra durability. NOTE: The center pinch is compatible with all 52mm lenses. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "?" (diameter) symbol. For example: ?mm lens thread size. (5)Lens Cap Keeper Leash: Lightweight and durable. Purchase one for all your lens caps and never lose a cap again! (1)Microfiber Cleaning Cloth: Ultra gentle! Extremely handy! Features special saw tooth pattern edges. Ideal for cleaning oil and dirt off eyeglasses, iPhone/iPad and other touch screens, binocular lenses, DSLR and other camera lenses, GPS devices, and other delicate optics. Size: 5.9xx14.5cm. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Straight Offset Railblock (mm Spaced) for mm Rod DSLR Rig Rail System Neewer Straight Offset Railblock (mm Spaced) for mm Rod DSLR Rig Rail System The Straight Offset Railblock is very useful building a dslr shoulder rig

Neewer TRIOPO TR-988 Professional Speedlite TTL Camera Flash with *High Speed Sync* for Canon and Nikon DSLR Cameras Neewer TRIOPO TR-988 Professional Speedlite TTL Camera Slave Flash with *High Speed Sync* for Canon and Nikon DSLR Cameras /such as Canon EOS 5D Mark III, 5D Mark II, 1Ds Mark 6D, 5D, 7D, 60D, 50D, 40D, 30D, 300D, 100D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, D, D/EOS Digital Rebel, SL1, XT, Xti, Xsi, T1i, T2i, T3i, T4i, T5i, XS, T3; Nikon D4S, D4, D3S, D800, D700, D80, D90, D, D, D50, D40X, D60, D, D, D, D, D40, D, D, D, D Features: Powerful Flash with High Guide No.56(ISO mm). High-speed sync up to th of a second. Ultra-fast 2.9 second full-discharge recycle time. This flash is compatible with both Canon and Nikon DSLR cameras, which supports both the E TTL and i-TTL function. Rear-curtain sync and stroboscopic/multi flash control, the speedlite flash is suitable for even the most demanding professionals and aspiring pros. PC port and charging socket for external power pack, to meet your higher demand for charging recycle. Large-size LCD display. The TR-988 speedlite is equipped with large-size LCD screen, with clear and intuitive view. Support high speed continuous shooting:

Neewer DP DSLR Rig Shoulder support stabilizer Set for 15mm Rod Support Rail System for DV Cameras and DSLR Cameras This DSLR rig shoulder support mount is specially designed for a comfortable photographing.It will release pressure from your hand to your shoulder,and free your hand from the handle support.You can use your free hand to adjust focus,or any other things.Its Sponge rubber pad (integrated with ergonomics principle) on it makes your shoulder much confortable than most sold on the market. Besides,it improves stability on photographing. Great assisstant for you. Feature: Provide steady video shooting with DSLR.It completely eliminates back neck and arms stress. Suitable for Industry standard 15mm rail rod system.(rod centre to center distance is 60mm) Flexible designed, easy to transform into different shooting mode. Made of metal and sponge rubber Sponge Rubber pad is comfortable for shooting. Z shape bracket makes this shoulder support stabilizer able to be mounted on your right shoulder or left. Suitable for all DSLR cameras. Specifications: Material: metal and Sponge Rail Diameter: 15mm Rail Distance: 60mm Rail Length: 300mm Size of the shoulder pad: 9cm x 16.5cm x 5.5cm Note andamp; Tips: The package content listed

Neewer® Auto Focus Macro Extension Tube Set for Canon EOS DSLR SLR Lens, Extreme Close-Ups (Red), fits Canon EOS 1d, 1ds, Mark II, III, IV, 5D,Mark II, 7D, 10D, 20D, 30D, 40D, 50D, Digital Rebel xt, xti, xs, xsi, t1i, t2i, t4i, t5i 300D, 350D, 401D,0D, 500D, 550D, 650D, 700D, D (Metal Bayonet)) Product Features Lightweight design Material: Alumium + Plastic Perfect coupling with TTL.AE Metering Use Individually or Combined Description Macro Extension Tube moves the lens farther from the film or digital sensor. The farther away the lens is, the closer the focus, the greater the magnification. This extension tube set does not affect image quality as there is no optics inside. In comparison, close-up filters are often blamed for degrading image quality. Features: Lightweight design Material: Alumium + Plastic Perfect coupling with TTL.AE Metering Use Individually or Combined Specifications: Lengths FOR tubes (mm): Tube #1: 13 Tube #2: 21 Tube #3: 31 IMPORTANT NOTE: This extension tube set is SUITABLE FOR CANON EOS DSLR/Film SLR/LENS ONLY Package Contents: 1x NEEWER 3-piece Macro Extension Tube Set 1x Protection Bag 1x Manual Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer® Auto Focus Macro Extension Tube Set for Canon EOS DSLR SLR Lens, Extreme Close-Ups (Silver) (Metal Bayonet mm) Product Features Material: Metal Perfect coupling with TTL.AE Metering Use Individually or Combined This extension tube set is SUITABLE FOR CANON EOS DSLR/Film SLR/LENS Fits Canon EOS 1d, 1ds, Mark II, III, IV, 5D,Mark II, 7D, 10D, 20D, 30D, 40D, 50D, Digital Rebel xt, xti, xs, xsi, t1i, t2i, t4i, t5i 300D, 350D, 400D, 450D, 500D, 550D, 650D, 700D, D Description Macro Extension Tube moves the lens farther from the film or digital sensor. The farther away the lens is, the closer the focus, the greater the magnification. This extension tube set does not affect image quality as there is no optics inside. In comparison, close-up filters are often blamed for degrading image quality. Features: Lightweight design Material: Alumium + Plastic Perfect coupling with TTL.AE Metering Use Individually or Combined Specifications: Lengths FOR tubes (mm): Tube #1: 13 Tube #2: 21 Tube #3: 31 IMPORTANT NOTE: This extension tube set is SUITABLE FOR CANON EOS DSLR/Film SLR/LENS ONLY Package Contents 1x NEEWER 3-piece Macro Extension Tube Set 1x Protection Bag 1x Manual Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Hot Shoe Flash Receiver for Canon and Nikon DSLR Cameras Neewer FC-16 Multi-Channel 2.4GHz 3-IN-1 Wireless Hot Shoe Flash Receiver for Canon and Nikon DSLR Cameras - Neewer Wireless Hot Shoe Flash Receiver - This receiver is designed for photographic studio and on-location work to trigger various flash lights. The FC-16 transmitter (sold separately) is attached on the hot shoe of the camera while the receiver is plugged into the studio flash. Each receiver works with one studio flash. - Frequency: 2.4Ghz - Operating Distance: up to 100m. - 16 Selectable Channels. - 1/4" Tripod Mount. - Sync Speed: second. - Power Supply: 2x alkaline AAA batteries (NOT INCLUDED) IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Battery Grip Pack Replacement for Nikon MB-D16 as EN-EL15 Battery for Nikon D750 DSLR Camera Neewer Neewer Battery Grip Pack Replacement for NikonMB-D16 for Nikon D750 DSLR Camera Features: Vertical shot becomes as easy as horizontal shooting. It can be powered either by six AA batteries (Alkaline or Ni-MH or Lithium), or EN-EL15 rechargeable Li-ion batteries. (Battery not included). Greatly provides the power for continuous shooting and improves your work efficiency. Sealing design to keep the water and dust penetrating. Specifications: Working Voltage: 7.2V-8.4V Working Temperature: 0 degreeC - 40 degreeC Applicable battery: 1 NE-EL15 Lithium battery,6AA batteries(NOT included) Note: Camera

Neewer Plastic DSLR Matte Box C1 for 15mm Rail Rod Support Follow Focus System Product Features Material: Plastic Compatible with 15mm rod, center-to-center rails distance 60mm. Suitable For: Wide angle lenses on DV/HDV/Broadcast/16:9 cameras. Height can be adjusted. Description This NEEWER C1 matte box for Customized Film-maker System is specially designed for most of the DV cameras with wide angle lens. It can also works with standard 15mm rails, center-to-center rails distance 60mm. Features: French Flag/Side Flags: The flags provide extra flare reduction and improves the quality of videos. The side flags are quick removable. They can be attached / detached easily. The flags are attached firmly on the sunshade mattebox by hinge mechanism. The side flags can be opened to the desired length by using the small knob provided on the flags. With additional bracket/rods as component for Customized Film Maker System Compatible with 15mm rod, center-to-center rails distance 60mm. Compatible with wide angle lenses. Height can be adjusted. Specifications: Material: Plastic Compatible with: 15mm rod Hole center-to-center rails distance: 60mm Suitable For: Wide angle lenses on DV/HDV/Broadcast/16:9 cameras. Package Contents: 1x NEEWER Matte Box C1 for Customized Film-maker System Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer 4-hole Rod Raiser Clamp to Raise a Second Set of 15mm Rods on DSLR Shoulder Rig Product Features This 4-hole 15mm rod raiser clamp is widely used on standard 15mm DSLR/DV support rig system to attach other bracket or device for convenient shoot and recording. It allows front-of-camera accessories (such as a follow focus or matte box) to be used with video DSLR with battery grip or other under-camera accessory. It raises a second set of 15mm rods 30mm from the existing rods. Fits standard 15mm rods, 60mm rails center-to-center distance. Made of Aluminum alloy, very solid and durable. Description Features: This 4-hole 15mm rod raiser clamp is widely used on standard 15mm DSLR/DV support rig system to attach other bracket or device for convenient shoot and recording. It allows front-of-camera accessories (such as a follow focus or matte box) to be used with video DSLR with battery grip or other under-camera accessory. With 4-hole rod raiser clamp, the shoulder pad can be used together with bridge plate and offset clamp. You can adjust the shoulder pad high or attach a second set rod

Neewer® Aluminum Camera Video Cage Kit Movie Kit Film Making System for Canon 5D mark II/ 5D mark III/700D 650D 600D 550D 500D 450D;Nikon D D D D D D D D;Pentax K7 K5 K3;Sony A850,A700,A550,A450,A77,Olympus E-P3, E-P5, E-PL3 and Other SLR DSLR Camera Professional Photograph with Universal Hot Shoe and 1/4" Thread, includes (1)Video Cage+(1)Top Handle Grip+(2)15mm Rod+(1)Matte Box+(1)Follow Focus+(1)Shoulder Rig Product Features 1/4" mounting holes of the cage offers mounting space for a variety of camera accessories such as handgrips, preview monitors, microphones, sound recorders, lights, support rods, mixers, batteries, and other DSLR cages. 15mm rod,top handle grip,wrench included. This Matte Box could be adjusted the height (up to 45mm) according to the lens of camera on the rail rod system. It can also works with standard 15mm rails, center-to-center rails distance 60mm. The follow focus finder can let you shoots precisely, focus precisely and operate smoothly. Whether you're shooting with a fixed-lens camcorder, interchangeable cinema lens, or a video-capable DSLR camera, this machine will provide repeatable and accurate focusing. Shoulder Rig includes 15mm rod, Soft Rubber Shoulder Pad and Dual-hand Handgrip For All DSLR Video Cameras and DV Camcorders. Kit includes: (1)Video Cage+(1)Top Handle Grip+(2)15mm Rod+(1)Matte Box+(1)Follow Focus+(1)Shoulder Rig Description Camera Cage & Top Handle Grip Made of alluminum alloy, durable and built to last Two rubber coated handles, comfortable to hold and spread apart for stabilization Portable and lightwight. Easy to assemble or disassemble. The top bracket carries threaded holes for mounting a variety of accessories such as hot shoe adapters, mini ball heads The bottom bracket has threaded to attach a quick release plate Permit access to battery and memory doors as well as power and input/output connectors Fixed handle grip, compatible with 1/4" or 3/8" thread Rail center-to-center distance of Top Handle Grip: 40mm Matte Box French Flag/Side Flags: The flags provide extra flare reduction and improves the quality of videos. The side flags are quick removable. They can be attached /detached easily. It works with standard 15mm rail rod support systems, and fits lens from 43mm to 77mm sizes.(others do not fit.) The mattebox designed for most DV cameras with wide angle lenses. Follow Focus: Adjustable locking system. Compatible with all DSLR cameras, video cameras, HDV, DV, specially for HDSLR camera with movie function. Gear drive can be mounted from either side. Shoulder Rig: Can be installed with video-capture series of related accessories Suitable for 1/4 "screw-holes digital SLR cameras and camcorders Can be installed rails (tube diameter 15mm center distance 60mm) Note: Camera not included! Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer LCD Glass Screen Protector for Canon EOS 5D Mark III 5DIII DSLR Camera Features: 100% brand new and professional DSLR 5DIII Canon LCD Glass Screen Protector This LCD Screen protector fit for Canon 5D Mark III DSLR digital cameras. It is made of 0.5mm optical glass to provide the highest protection for your valuable cameras. This protector gets over 95% transparent rate, to show the clear image of the LCD screen. The hardness of the surface is 8-9H, and support up to 4KG/m^2, highly resist to scratches and shock. It also protects the LCD screen away from UV light. The raw material of optical glass It is made of 6 protection layers: Protection layer Coating layer, Transparent layer, Color layer mount layer clinging layer. Compatible for Canon 5D Mark III DSLR digital cameras IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Digital Slave Flash with Bracket Set for DSLR DSLR Cameras Pro Digital Auto Slave Flash with Bracket Set for All Digital Cameras Description: Affordable Professional Flash Solution with the latest Digital Technology! “Fires Without Wires - No Camera Connection Required!",Automatically Synchronizes and Fires with Your Built-In Flash Features: Brand New and High Quality. Auto Pre-flash Sensor for red eye Flash Ready Light indicator Compact, lightweight design is ideal for travel Dramatically improves telephoto zoom flash pictures Enables use of smaller apertures for increased depth of field Improves color, depth and evenness of lighting up to 34 feet or more Use off camera as a remote slave, place & aim it anywhere extra light is needed Bracket includes hot shoe for easy flash removal Q&A: My digital camera has a built-in flash. Why do I need another? Built-in flashes are only effective to 8-10ft or less. This high power flash greatly extends the range! The built

Neewer 3 Wheel Triangle Dolly Skater Slider for DSLR Camera DV Video with 280oz/8kg Load Capacity This three Wheel Triangle Dolly is designed to help you create more dynamic shots on flat surfaces like on table, ground, etc, adding cool video to your digital skill set, or just make it easy for you to do your own creative projects using a hand-held HD camcorder, video-ready DSLR, or professional video camera. This camera dolly has degree scale on the block, so the users can adjust wheels to suitable degree for camera shooting and video. Features: Body made of heavy-duty aluminum alloy and steel Head screw accepts 1/4" and 3/8" female heads 4 durable rubber wheels can protect the camera from turbulence Use with DSLR, compact camera, point and shoot camera, camcorder, video light or microphone Provides a portable solution and professional results for compact video productions with DLSR or video cameras. Includes 3/8" stud adapter Every wheel can reach 180 degree rotation With marking on the metal triangular shaped base plate, the rotation angle can be conveniently and precisely planned. The plate has three standard 1/4" thread holes for magic arm, ball head and other camera accessories use. Ball head can be mounted on 3/8"" thread of the dolly. Excellent straight and curved movement ability 3 hollow holders design for holding every side Specifications: The length between the wheel and the center of platform: 14cm/5.5inch(approx) The length between two wheels: 24cm/9.4inch(approx) Size of the wheel: 65mm/2.5inch(approx) Load capacity: approx.280oz/8kg NOTES: only Dolly Car, not including camera and ball head. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Adjustable Padded Neoprene Camera Shoulder Strap for all SLR/DSLR Camera Product Features Constructed with soft neoprene with a layer of anti-slip rubber inside Elastic neoprene strap evenly spread out the weight from the camera to reduce the stress on your shoulder Long, wide straps for comfortable and convenient carrying of your camera Fits all DSLR camera Accessories only, camera is not included Description Note: Accessories only, camera is not included. Features: Upgrade your SLR / DSLR with this anti-slip weight reducing neoprene camera shoulder strap Constructed with soft neoprene with a layer of anti-slip rubber inside The elastic neoprene strap evenly spread out the weight from the camera to reduce the stress on your shoulder Anit-slip rubber layer inside helps you to prevent accidental slip of your expensive camera Long, wide straps for comfortable and convenient carrying of your camera Fits all DSLR camera Specifications: Material: Neoprene Color: Black Package Contents: 1x Camera Shoulder Strap Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer® Aluminum Camera Video Cage Kit Movie Kit Film Making System for Canon 5D mark II/ 5D mark III/700D 650D 600D 550D 500D 450D;Nikon D D D D D D D D;Pentax K7 K5 K3;Sony A850,A700,A550,A450,A77,Olympus E-P3, E-P5, E-PL3 and Other SLR DSLR Camera Professional Photograph with Universal Hot Shoe and 1/4" Thread, includes (1)Video Cage+(1)Top Handle Grip+(2)15mm Rod+(1)Matte Box+(1)Follow Focus Product Features Compatible with Canon 5D mark II/ 5D mark III/700D 650D 600D 550D 500D 450D;Nikon D D D D D D D D;Pentax K7 K5 K3£¬Sony A850, A700, A550£¬A450,A77,Olympus E-P3, E-P5, E-PL3. 1/4" mounting holes of the cage offers mounting space for a variety of camera accessories such as handgrips, preview monitors, microphones, sound recorders, lights, support rods, mixers, batteries, and other DSLR cages. 15mm rod,top handle grip,wrench included. This Matte Box could be adjusted the height (up to 45mm) according to the lens of camera on the rail rod system. It can also works with standard 15mm rails, center-to-center rails distance 60mm. The follow focus finder can let you shoots precisely, focus precisely and operate smoothly. Whether you're shooting with a fixed-lens camcorder, interchangeable cinema lens, or a video-capable DSLR camera, this machine will provide repeatable and accurate focusing. Kit includes:(1)Video Cage+(1)Top Handle Grip+(2)15mm Rod+(1)Matte Box+(1)Follow Focus Description Camera Cage & Top Handle Grip Made of alluminum alloy, durable and built to last Two rubber coated handles make it comfortable for you to hold and spread apart for stabilization Portable and lightwight. Easy to assemble or disassemble,convenience for you to carry while travelling The top black anodized metal bracket carries threaded holes and 1/4" holes for mounting a variety of accessories such as hot shoe adapters, mini ball heads The bottom black anodized metal bracket has threaded mounts available underneath to attach a quick release plate Permit access to battery and memory doors as well as power and input/output connectors Fixed handle grip, compatible with 1/4" or 3/8" thread Rail center-to-center distance of Top Handle Grip: 40mm Matte Box French Flag/Side Flags: The flags provide extra flare reduction and improves the quality of videos. The side flags are quick removable. They can be attached /detached easily. It works with standard 15mm rail rod support systems, and fits lens from 43mm to 77mm sizes.(others do not fit.) The mattebox designed for most DV cameras with wide angle lenses. Follow Focus: Completely gear driven design for slip-free and accurate movement. Adjustable locking system. Compatible with all DSLR cameras, video cameras, HDV, DV, specially for HDSLR camera with movie function. Gear drive can be mounted from either side. Note: Camera not included! Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer Mini Portable Video Stablizer for Digital Cameras,SLR Cameras and Camcorders The appearance of Neewer Mini stablizer is compact, easy to take the picture, with flexible design. It makes comprehensive shooting. The body of DSLR stabilizers is made of high-strength aluminum alloy, match with professional foam,which handled comfortable. The balancing pole can lengthen to take the picture by high angle. Straight rod "I" type design, flexible handling, can be used for 360 degreevideo making. Features: Engineered to support cameras up to 4 Kg (approx. 141 Oz) Telescopic CF sled for perfect balancing With handle for portable mobile film making Fast set up, install and play Height: approx. 25cm Accommodates a range of cameras/Camcorders of Canon, Sony, Nikon, Panasonic, Fuji, Pentax, etc. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer 67MM Filter Kit+Close-up Set+ND Filter Set+Tulip Lens Hood+3-in-1 Lens Hood Neewer 67MM Complete Lens Filter Accessory Kit for CANON EOS 70D 60D 7D 6D EOS 700D 650D 600D 550D/T5i T4i T3i T3 T2i DSLR Cameras, Kit includes:(1)Filter Kit (UV, CPL, FLD)andnbsp; + (1)Macro Close-up Filter Set (+)Neutral Density Filter Set (ND2, ND4, ND8) + (1)3-in-1 Collapsible Lens Hood + (1)Tulip Lens Hood + (1)Snap-on Front Lens Cap + (1)Cap Keeper Leash + (3)Filter Carrying Pouches + (1)Microfiber Cleaning Cloth Bullet Points: Kit includes:(1)Filter Kit (UV, CPL, FLD)andnbsp; + (1)Macro Close-up Filter Set (+)Neutral Density Filter Set (ND2, ND4, ND8) + (1)3-in-1 Collapsible Lens Hoodandnbsp; + (1)Tulip Lens Hood + (1)Snap-on Front Lens Cap + (1)Cap Keeper Leash + (3)Filter Carrying Pouches + (1)Microfiber Cleaning Cloth. Compatible with the CANON REBEL (T5i T4i T3i T2i), EOS (700D 650D 600D 550D 70D 60D 7D) DSLR Cameras with the mm EF-S IS STM zoom Lens. The 52mm filter kit(UV, CPL, FLD)fit any camera lens with a 52mm filter thread. High quality metal and glass construction.The 52mm macro close-up filter set(+)are double threaded allowing additional filters, lenses, or attachments to be mounted on top.The ND filters(ND2, ND4, ND8) reduce the amount of light reaching the film without affecting the color. The 3-in-1 collapsible lens hood extends to full length for use with a telephoto lens. The tulip lens hood can help prevent flares. The filter carrying pouch has clear inner lining for quick and easy access.The cleaning cloth is safe for all surfaces and lenses. (1)67mm Filter Kit (UV, CPL, FLD): UV filters reduce haze and improve contrast by minimizing the amount of ultraviolet light. CPL filters are great for removing unwanted reflections from non-metallic surfaces such as glass or water. FLD filters allow for shooting under fluorescent lighting. Bring warm natural lighting to rooms. (1)67mm Macro Close-up Filter Set (+): Set of 4 filters of increasing magnification for high detail, close-up macro photography. This is the perfect, economical alternative to a macro lens. Offer a world of new and creative possibilities. (1)ND Filter Set (ND2, ND4, ND8): Can be used to enable slower shutter speeds.andnbsp; Also can be used to better separate subjects from the background by allowing wider apertures. (1)3-in-1 Collapsible Lens Hood: Midway for wide angle shots, or completely for macro photography and storage. (1)Tulip Lens Hood: Help prevent flares--those circles of light that can accompany images where a strong light source is just outside the frame. Professional tulip shape(also known as 'flower' or 'petal' shape) design allows for greater versatility. (1)Snap-on Lens Cap + (1)Cap Keeper Leash: Easy to use. Quickly attach to the front of your camera lens. Made of high impact plastic for extra durability. (3)Filter Carrying Pouches + (1)Microfiber Cleaning Cloth: The filter carrying pouch was designed to hold and protect filters with or without their protective cases. The cleaning cloth features special saw tooth pattern edges.Leave zero scratches, streaks or marks.Size: 5.9xx14.5cm. IMPORTANT NOTE: This product will be imported against receiving your order. If the product is