Neewer release lens

Neewer Quick-release Lens Replacement Foot for Canon 200mm F2 IS / Canon 200mm F2 IS II,RRS,Benro,Sirui,Arca Comaptible Features: Replaces the factory mounting foot on Canon lenses: Canon 200mm F2 IS / Canon 200mm F2 IS II. Converts the Lens foot to an Arca-Swiss compatible QR plate. Decreases the overall height of lens, lowers the center of gravity, and provides rock solid stability. Precision machined from aircraft-grade aluminium material. High quality surface anodizing, solid and durable. Specifications: Length: mm Width: mm Height: mm Fit: Canon 200mm F2 IS / Canon 200mm F2 IS IIandnbsp;andnbsp;andnbsp; IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Camera Lens Coat Camouflage Raincoat for DSLR Camera with Lens from 300mm mm or Small Lenses Up to 400mm f5.6 Neewer Camera Lens Coatandnbsp;Camouflageandnbsp;Raincoat for DSLR Camera with Lens from 300mm mm orandnbsp;Small Lenses Up to 400mm f5.6 Neewer Camera Lens Coat provides protection for your camera and lens from the elements like rain, snow, salt spray, dirt, sand and dust while allowing you easy access to the camera and lens controls. The coat is constructed from a lightweight waterproof, breathable poly tricot material. The seams are tape sealed for maximum protection. Features: Neewer Camera Lens Coat comes

Neewer Camera Lens Hood for Nikon mm AF-S Lens- Replacement for Nikon HB-45 + Microfiber Cleaning Cloth Camera Lens Hood for Nikon mm AF-S Lens- Replacement for Nikon HB-45 + Microfiber Cleaning Cloth Descriptions: This Lens Hood is made of high quality impact plastic, perfect for preventing the lens from stray or any other unwanted light,

The LP-46SG Quick Release Lens Plate from Kirk Enterprises is a quick-release plate you can swap with your lens tripod collar for easier mounting on and removal from a lens tripod. The lens plate replaces the original tripod collar and features sure grip coating for easier handling.

The Kirk LP-46 Lens Plate is designed to take the place of the original tripod collar foot of a Nikon 400mm f 2.8 AF-S (I and II) 600mm AF-S II and VR lenses and to convert the collar to make it directly compatible with Arca-type quick release clamps without the need for additional quick release plates. The foot is quot shorter then the original Nikon foot which helps to lower its center of gravity. Critical mass is also reduced but the original Nikon design is still maintained which allows it to still be used as a carrying handle..Each adapter comes complete with all the necessary hardware and tools to make the conversion.

Neewer Black Quick Release Plate For Camera Tripod Ballhead DP60 Feature New generic Black Quick Release Plate For Camera Tripod Ballhead DP% brand new and high quality Quick Release Lens Plate All Metal Construction Dual dovetail design 38mm wide 60mm (2.36")

Neewer® Lens Hood Kit for Sony Alpha E PZ E-mount Power Zoom mm F OSS Essential Lens - Tulip Flower Lens Hood + Inner Pinch Lens Cap + Lens Adapter mm for Sony A, A, A, NEX-5T, NEX-6 Olympus Camera Kit Lenses Product Features Stops light coming into the lens at extreme angles and being reflected inside the lens. High qualified material, helps increase color and saturation by reducing lens flares and reflections. Protection from Accidental Impact, an essential add-on for your camera. Front 52mm thread for filter and Lens Cap. Backed with Neewer 12-Month 100% Satisfaction Guarantee.Note: Camera not included. Description The Neewer flower lens hood: Lens hoods are primarily designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. Helps prevent flares, reduces glare, and the flower design is perfect for standard and zoom lenses. The threaded mount screws directly onto the included step-up ring which fits the camera's filter thread. Designed to screw right into your lens and the rear locking ring allows the user to rotate the hood

Lens Hood Kit for Sony A, A, A, NEX-5T, NEX-6 Camera Neewer Lens Hood Kit for Sony Alpha E PZ E-mount Power Zoom mm F OSS EssentialLens - Tulip Flower Lens Hood + Inner Pinch Lens Cap + Lens Adapter mm forSony A, A, A, NEX-5T, NEX-6, Olympus Camera Kit Lenses   l   Stops light coming into the lens at extreme angles and beingreflected inside the lens. l   High qualified material, helps increase color and saturation by reducinglens flares and reflections. l   Protection from Accidental Impact, an essential add-on for yourcamera. l   Front 52mm thread for filter and Lens Cap. l   Backed with Neewer 12-Month 100% Satisfaction Guarantee.       The Neewer lower lens hood: Lens hoods are primarily designed toprevent unwanted stray light from entering the lens by extending and shading theend of the lens. Helps prevent flares, reduces glare, andthe flower design is perfect for standard and zoom lenses. The threaded mountscrews directly onto the included step-up ring which fits the camera's filterthread. Designed to screw right into your lens andthe rear locking ring allows the user to rotate the hood

Neewer Camera Protective Lens for HD Gopro Hero 3 Hero 3+, 2 Pack Neewer Protective Lens Cover Cap Housing Protector for HD Gopro Hero 3 Hero 3+, 2 Pack Note: Camera is NOT included. Features: Suit for camera Gopro Hero 3/3+; Perfect match with your Gopro lens without distortion and vignetting; Protect your camera's lens from dust, dirt and scratches when outdoor using; A must have for shutterbugs. Specifications: Compatible: Gopro Hero 3 / Hero 3+ Product Dimension: 1.2 x 1.2 x 0.4

Neewer Camera Protective Lens for HD Gopro Hero 3 Hero 3+ Neewer Protective Lens Cover Cap Housing Protector for HD Gopro Hero 3 Hero 3+ Note: Camera is NOT included. Features: Suit for camera Gopro Hero 3/3+; Perfect match with your Gopro lens without distortion and vignetting; Protect your camera's lens from dust, dirt and scratches when outdoor using; A must have for shutterbugs. Specifications: Compatible: Gopro Hero 3 / Hero 3+ Product Dimension: 1.2 x 1.2 x 0.4

Neewer EW-63C Lens Hood for Canon EF-S mm f/ IS STM Lens (Canon EW-63C Replacement)+ Microfiber Cleaning Cloth EW-63C Lens Hood for Canon EF-S mm f/ IS STM Lens (Canon EW-63C Replacement)+ Microfiber Cleaning Cloth Features: Perfect replacement for Canon EW-63C Compatible with Canon EF-S mm f/ IS STM Lens Prevent glare and lens flare caused by unwanted light Jazz up your photos with richer colors and deeper saturation;Twist-lock mounting for extra security Handy reversible design allows you to attach the hood

Neewer® NW-565C Professional E-TTL Slave Flash Kit for Canon Rebel T5i T4i T3i T3 XS T2i T1i Xsi Xti, EOS 650D 600D D D 550D 500D 450D 400D 350D 300D 5D Mark III 5D Mark II 6D 5D 7D 60D, 50D and All Other Canon DSLR Cameras- Includes: Neewer Auto-Focus Flash + 2.4GHz 3-IN-1 Wireless Trigger + 2 Cables(C1-Cord + C3-Cord Cables) + Hard & Soft Flash Diffuser + Lens Cap Holder Product Features Powerful Flash with High Guide No. 58 (ISO mm). Lens Coverage 18mm - 180mm. Automatically zoom, wireless TTL, optical sensing,compatible with Canon wireless flash signals, features with Overheating protection, Voice prompt,Custom function,Rear-curtain Sync Charging socket for external power pack: adds a charging socket for external power pack. PC synchronous port: simple for you to use the PC synchronous line. Kit includes: Neewer Professional On/Off-Camera E-TTL Auto-Focus Flash + 2.4GHz 3-IN-1 Wireless Trigger + 2 Cables(C1-Cord + C3-Cord Cables) for Remote Control + Hard Flash Diffuser + Soft Flash Diffuser + Lens Cap Holder Backed with Neewer 1-Year 100% Satisfaction Guarantee. Description - Neewer Auto-Focus Flash - Wireless slave unit function: Compatibility with the Canon wireless flash system, realize TTL from machine, manual and frequency flash. - Super fast 2.9 second recycling time - Up and down whirl angel:7-90 degree;Left and right whirl angel: degree - Flash Mode: TTL,M,FEB,Slave,S1,S2,Multi - Features a memory function and power saving mode - Circuit design: Insulated Gate Bipolar Transistor - Compatible with:Canon EOS 5D Mark III,5D Mark II,1Ds Mark [IV / III / II / I],1D Mark [III / II N/ II / I],6D, 5D,7D,60D,50D,40D,30D,700D,100D,650D,600D,550D,500D, 450D, 400D,350D,300D,D,D,Rebel Xti,Xsi,XS,T1i,T2i,T3i,T4i,T5i,SL1,T3 - 2.4 GHz Wireless Flash Trigger with Remote Shutter Function -It provides the convenience of a wireless camera shutter release - 3-in-1 wireless remote control for camera, speedlite and studio flash - 16 Channels Selectable - Sync speed up to s - Transmitter power:2 x AAA battery - Receiver power:2 x AAA battery - Cable- C1 + Cable- C3 Connecting Cords for Remote Control - Provides the convenience of a wireless camera shutter release, ideal for photographing wildlife, and also for macro and close-up photos. - Camera connecting cords for remote controls with 2.5mm socket - Flash Diffuser - Soft Flash Diffuser:spreads and softens the light emitted from your flash unit,bouncing off ceilings and walls, instead of coming from a single concentrated light source - Hard Flash Diffuser:Reduces and softens harsh shadows behind subject and eliminates red eye effect - Lens Cap Holder - Small button sticks to the front of your lens cap;fits snuggly around the circumference of your lens Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned

Neewer DP500II DSLR Rail 15mm Rod Support System with Quick Release Plate Description: High Quality Neewer DPmm Rail Rod Support. It can be mounted with camera/camcorder, lens, follow focus, matte box, Neewer DP500 shoulder mount support and Neewer DP500 others accessories.   Features: 100% brand new and high quality and cheap Every part can be detached and reassembled easily as you want Built-in Lens Support, usefully support any lens and protect your lens with the smooth contact This Rail System has a central Tripod Mounting plate that makes a perfect balance between the camera and the front mount accessories (35mm Adapter/Matte box/Follow Focus). The distance between the camera connect with lens holder is adjustable Made of anodized black aluminum, very durable and strong to support big camera and lens Specifications: Material: Metal Color: Blue & Black Rails Length: 250mm Rails Diameter: 15mm Rails Center-to-Center Distance: 60mm Thickness of Adapters: 8mm Lens Support Size: 30 x 28 mm Tripod Mounting Plate Size: 80 x 45mm Tripod Mounting Plate Screws Thread: ″ IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer Fish Bone Style Mini Quick Release Screw-knob Mount Clamp Adapter Compatible with Arca-Swiss for Tripod Head, Black Color Description: The Fish Bone Clamp is a mini quick release screw-knob clamp with only 25mm width, ideal for holding small size quick release plates or mounting on compact tripods. If you are owner of a mirrorless interchangeable lens digital camera or compact camera, the Fish Bone Clamp is a must-have. This item is fully Arca-Swiss compatible, you can mount it on any Arca standard tripods or monopod, and any Arca style camera plates or L-bracket will fit. andnbsp; Features: Very versatile jaw openning range Very light weight Precision spirit level Precision CNC machined from solid T651 Aluminum material Black Satin Anodized Specifications: Maximum length with handle: 100mm / 3.93" Width: 25mm / 0.98" Height: 15mm / 0.59" Mounting screw: threaded IMPORTANT NOTE: This product will be imported against receiving your order. If the product is

Neewer® Fish Bone Style Mini Quick Release Screw-knob Mount Clamp Adapter Compatible with Arca-Swiss for Tripod Head, Black Color Product Features Very versatile jaw openning range Very light weight Precision spirit level Precision CNC machined from solid T651 Aluminum material Black Satin Anodized Description Description: The Fish Bone Clamp is a mini quick release screw-knob clamp with only 25mm width, ideal for holding small size quick release plates or mounting on compact tripods. If you are owner of a mirrorless interchangeable lens digital camera or compact camera, the Fish Bone Clamp is a must-have. This item is fully Arca-Swiss compatible, you can mount it on any Arca standard tripods or monopod, and any Arca style camera plates or L-bracket will fit. Specifications: Maximum length with handle: 100mm / 3.93" Width: 25mm / 0.98" Height: 15mm / 0.59" Mounting screw: threaded Package Contents: 1x Fish Bone Clamp 1x " screw adapter Images Disclaimer Tanotis sells only 100% brand new genuine products In .in, we ship most of the products through Powership. If the order is a non powership order we will check with our other courier partners, if it is not possible to ship the product, we will refund the amount Tanotis is a company and not an individual sellers account. At Tanotis we value our customers. You get hassle free returns, refunds & replacements. We also take bulk order requests and offer better prices for resellers/distributors Some battery operated products may be shipped without batteries even though the batteries are mentioned