Pic 16f877a pin

PIC16F877 Microcontroller       PIC16F877 is one of the most commonly used micro-controller especially

The PIC DEVELOPMENT board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18-, 28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices.  It can be used as a standalone demonstration board with a programmed part. Alternatively, it can be used with an in-circuit emulator (for example, MPLAB® Real ICETM) or with an in-circuit programmer/debugger (such as MPLAB® ICD 3 or PICkitTM 3). Microchip offers a bundle of the PICDEM 2 PLUS and the MPLAB® ICD 3, called the MPLAB® ICD 3 Evaluation Kit (with PICDEM 2 Plus), product number DV164036. Sample programs are provided to demonstrate the unique features of the supported devices.       Key Components  LCD display Interface 40 pin socket 4x LEDs four 7 segment display  RS232 interface to PC 12 V adapter connector GPIO Pin connector 4 * 4 switch matrix On-board external oscillators Four push button switches for external stimulus and reset Variable voltage input for ADC simulation Connectivity options Programmer/debugger connectivity using MPLAB ICD 3, MPLAB Real ICE and PICkit 3 PICkitTM Serial Connector for analysis of serial communications peripherals such as SPI or I2C Active RS 232 port Expansion

Package Contents   1 x PIC development Board with Free USB cable and CD containing software examples.   External Power supply NOT Included.    Contact Details   Have any Queries, Feel free to contact us anytime   Ph: +91-   or email us:   or contact us through by clicking "Ask seller a question"   Feedback Details   In case, you are not satisfied with the item or have any questions or complaints, please contact us before leaving a Feedback.   Leaving Negative or Neutral Feedback will not solve a problem,   We are always willing to solve the problems of buyers.   "Your feedback is very important for us to grow our business on , so please do leave positive feedback"    The PIC development board is a microcontroller board based on the PIC16F877. It has 33 input/output pins and two PWM outputs, 8 (10 bit) analog inputs, a works upto 20 MHz speed. A USB connection is available for programming and UART (communication with the PC), an external power jack is provided for high current motor applications etc. A Reset button is present. A 4 x 4 key matrix is provided for keyscan applications. A 16 x 2 LCD with programmable backlight is provided. A Piezo Buzzer is present. A 4 digit 7 segment common cathode display is populated for display multiplexing example. A onboard potentiometer is provided on one analog channel. A coin cell battery backed DS (RTC) is present on one of the I2C channel. An optional SPI external EEPROM (not provided with the board) can be mounted by the user for SPI memory. A ULN based stepper motor interface is present.   The Board contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. FEATURES AND USAGE The maximum length and width of the Board is approx 7 inch by 5.5 inches. Four PCB studs allow the board to be attached to a surface or act like a support stand. All the ports of the microcontroller are available as edge connectors on the right side of the board on a standard 100 mil spacing. The board can also take most of the 40 Pin DIP PIC18 series microcontrollers. An External programmer may be needed

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, New Fast Microchip (PIC) Microcontroller USB Programmer PICKIT2 Clone + DIP Package Microcontroller Adopter ICD (In Circuit Debugger) With MCU Lock facility (Protect your code.hex files from being copied) PIC 18F series and 16F877A,16F84A,628A,16F72 etc. Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc....   ***(Work with All Analog/Digital circuits with signal from 3V to 15V) *** Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 3.3v and 5v micro controller  (Check Other Listings  for  1.8V-5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 3V to 16V(1.5V to 16V for 1.8V logic) with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 3.3V and 5V micro controllers/Digital (1.8V Version also available Please Check My other Listings).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

Description：   84 X 84 dot matrix LCD,can show 4 lines of characters   Power supply voltage:2.7V-3.3V   Data interface level:2.7-5V   Backlight power supply voltage:highest 3.3V   Module size:43.6mm(width) x 43.1mm(length)   Installation diameter:2mm Pin Definition:   1.RST--------- reset   2.CE---------- chip selection   3.DC---------- data/commands choice   4.DIN--------- serial data line   5.CLK--------- serial Clock Speed   6.3.3V-------- VCC   7.LIGHT------- backlight control terminal   8.GND--------- power negative 3.Features: 1>. 84 X 84 dot matrix LCD,can show 4 lines of characters 2>. Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the arduino,AVR,PIC,STM32,STC MSP430 and so on.Transfer rate up to 4Mbps,can full speed write display data without waiting time. 3>. Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace. 4>. LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small 5>. Low power supply,the working current

Description: Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has two Two on-board relay which can switch up to 7Amps. Relays terminals (COM, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free-wheeling diode which will further protect your microcontroller from relay kick back. This is a 5V 2-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.    Features: 1.     Equipped with high-current relay 7A@250VAC / 10A@24VDC.  2.     It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc. 3.     High quality screw terminals (Terminal Block) provided (COM, NC, NO) for quick and easy connection. 4.     Free wheeling diode to protect your microcontroller. 5.     Input Signal Pin connected to Burg stick for easy accessibility. 6.     LED Status indicators to indicate the relay ON/OFF status. 7.     Mounting holes provided. Package Contains: 1.      1 x Two channel 5V relay Module.    

1 Input: DC 4.5V - 7V (. Input voltage must be output voltage higher than 1V above) 2 Output: 3.3V, 800mA (load current can not exceed 800ma) 3 dual-panel design, layout and nice; 4 specially designed 2 pin mounting holes, can be directly fixed tunnel plate to extend the experiment; 5 2P single row of input and output using pin for easy connection; 6 PCB board size: 2.5 cm * 1.1cm 7 with power indicator (red) 81 tablet weight is approximately: 1.6g

ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Product Description: The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 20MHz. Specification: ENC28J60 Ethernet chips, SOP28 package SPI Interface 2X5 connector, can be easily mounted with the MCU Power indicator Single Supply: +3.3 V PCB size: 55x36 mm Technical Details:    This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times ●       You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side ●       If 3.3V is used, the input voltage must not exceed 16.5V ●       Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0 ●       00489 V (5V / 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445 ●       Input voltage range: DC0-25V ●       Voltage detection range: DC0.02445 V - 25V ●       Voltage analog resolutions: 0.00489V ●       DC Input: positive terminal connected to VCC, GND negative pole ●       Output interface: "+" then 5 / 3.3V, "-" then GND, "s" then the AD pin Package Included: 1 x  ENC28J60 Ethernet LAN Network Module For Arduino SPI AVR PIC LPC STM32 Feedback:- Dear all,customer satisfaction is very important to us and our feedback rating reflects this satisfaction. Please do not leave negative feedback,if there is any problem,please contact us,we will do our best to provide the best service! If you are satisfied with the purchase and our service,please take a minute to give us a positive feedback. Please leave us 5 star feedback. For Customer support call / Whatsapp   0-76-9885-9005 किसी भी प्रकार की जानकारी या फिर मदद के लिए कॉल या W hatsapp  कीजिये    0-76-9885-9005 For bulk orders call or whatsapp  0-76-9885-9005 Shipping Via  FEDEX  & INDIAN POST  As per Available Location. Note:  IF ANY Confusion? Call us / Whatsapp    So please ask to seller before purchase. Thank You.

Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane "3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn/'t through MAX, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one

1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your Digital, Microcontroller,PC parallel port or Arduino Uno Etc... This board has 1 on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. There is free wheeling diode which will further protect your micro controller from relay kick back. and Reverse Supply protection included for Accidental supply reverse connection This is a 12V 1-Channel Relay interface board which can be controlled directly by All Digital and All micro controllers,  such as Arduino, AVR, PIC, MSP, COP8, ST,ARM, Etc.... ***(Work with All Analog/Digital circuits with signal from 1.5V to 15V) ***   Features: - Power supply Reverse Protection (useful to provide protection against accidental reverse polarity) - Improved Spike reduction(reduce System hangs when Operate Relay) - Work with All 1.8V,3.3v and 5v micro controller  (Check Other Listings  for  3.3V,5V Version) - Equipped with high-current relay 7A@250VAC / 10A@28VDC  - Control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals  for quick and easy connection - Free wheeling diode to protect your micro controller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicator to indicate the relay ON/OFF status. - Mounting holes provided ***ALL Modules are tested with Signal input 1.5V to 16V with VCC 16V*** Pin Details 12V    - 12V power supply for Relay GND   - Ground Signal - Control Signal for Relay On/Off, Work with 1.8V, 3.3V and 5V micro controllers/Digital).       Have any queries, Please contact through by clicking "Ask seller a question" Powered by Turbo Lister

Blue 0.96" inch SPI 128 x 64 OLED display module with CS pin SSD   Fully working Software Code included with English Font.     Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with arduino, AVR, PIC, 51 series, MSP,STM,CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:    128 x 64 Module Size:27.0mm x 27.0mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include: ·       1 x   0.96” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Blue 1.3" inch SPI 128 x 64 OLED display module with CS pin   Fully working Software Code included with English Font   Description:   What is OLED? OLED   (Organic Light-Emitting Diode) is a self light-emitting technology   composed of a thin, multi-layered organic film placed between an anode   and cathode. In contrast to LCD technology, OLED does not require a   backlight. OLED possesses high application potential for virtually all   types of displays and is regarded as the ultimate technology for the   next generation of flat-panel displays.   How Does OLED Emit Light? OLEDs basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Features: Interface: IIC/4-Wire SPI Visual Angle: >160° No backlight needed, the display OLED are self-luminous Fully compatible with Arduino, AVR, PIC, 51 series, MSP, STM, CSR or any controller with SPI. Wide range of operating temperature: -30°C to 70°C Easy to use software code due to low pin count Specifications: Display Colour: Blue Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Dot Matrix:128 x 64 Module Size:35.5mm x 33.5mm x 4.0mm Applications: Mobile Display Medical instrumentation Gaming and devices Industrial instrumentation Personal navigation devices   Package Include:   ·       1 x   1.3” OLED Display Module ·       A plastic container box ·       Software Code (Zip file e-Mail)   Shipping Details:     And for remote locations we prefer Indian speed post   Feedback: ·        In case you find any problem

Package Contents 1 x Single Channel 12V Relay Board Module Product Overview Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has one (1) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from relay circuit. There is free wheeling diode which will further protect your microcontroller from relay kick back. This is a 12V 1-Channel Relay interface board which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on.  - Equipped with high-current relay 7A@250VAC / 10A@24VDC  - It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc - High quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection - Free wheeling diode to protect your microcontroller. - Input Signal Pin connected to Burg stick for easy accessibility - LED Status indicators to indicate the relay ON/OFF status. - Mounting holes provided

1 Channel Isolated 5V Relay Module Coupling For Arduino PIC AVR DSP ARM   the module is compliant with international safety standards, control and load areas isolation trenches; a single relay a genuine; power supply and relay instructions, lit, disconnect is off; input signal, signal, common Terminal and start conducting; can be used as a single chip modules can be used for appliance control; DC or AC signal, control, you can control the 220V AC load; there is a normally open and one normally closed contact; Specification: One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for avoidance of malfunction Power supply indicator lamp Control indicator lamp Channel: 1 channel Relay Voltage: 5V Note  on the high level and low level triggered mode, friends who do not understand, have a look: High level trigger refers to the signal voltage between input and trigger, can be understood as a signal input with VCC cathode short-circuit triggered a way; Low level trigger refers to the signal voltage between input terminal and Earth OV trigger, can be understood as signal input terminal and the GND negative electrode short circuit triggered a way  1-channel relay module connection Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged