Power transistor kit

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit): All resistors (1% metal film) Power resistors Faston connectors Silpad 400 insulators Silver Mica compensation capacitors MJE drivers MJL output transistors (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors Main Heat Sink (100 mm x 182 mm x 19 mm - 1 No.) and Heat Sink for LME No. Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 5 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail:

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 7 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Branded components): All resistors (1% metal film)  Power resistors (CRC) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) Main Heat Sink required (100 mm x 260 mm x 32 mm - 1 No.) - NOT INCLUDED. Note:- Amplifier Output Power 350 Watt @ 8 Ohms and 550 Watt @ 4 Ohms (Power supply: Volt 7 Amps) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors,) Rs./- Shipping charge extra. Contact details:- E-Mail: Mob. No.:

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit with Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply: Volt 8 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  2SCSA output devices. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Kit without Main heat sink): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) 2SCSA output transistors (Manufacturer: Toshiba ) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 250 Watt @ 8 Ohms and 400 Watt @ 4 Ohms (Power supply required: Volt 6 Amps for Each Chanel) We also offer Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors Price Rs. shipping charge extra) Contact details:- E-Mail: Contact No.: Mob. No. 

High power output for PA system and DJ system, output devices (2SCSA) the amp will put out close to 350 Watts @ 8 Ohms, 550 Watts @ 4 Ohms and 700 Watts @ 2 Ohms. Required Power Supply transformer Volts, 8 Amps (Not Included).  Kit Includes (Qty- 1 No. complete Assembled Kit with 100% original & Reputed Brands component): All resistors (1% metal film)  Power resistors (Stead) Faston connectors MJE drivers, MJE , BC and BD SC SA output transistors 9 pairs (Each Transistor come with 150 Watt). All Film & Electrolytic Capacitors (Manufacturer of Electrolytic Caps- Keltron & Samsung and Manufacturer of Film Caps- Wima, Kemet & Muratta) MAIN HEAT SINK INCLUDED. Contact details:- E-Mail: Mob. No.

High power output and extremely low distortion, LME driver based design provides superb sound quality. The chip includes a Baker clamp that provides soft clipping unlike many discrete designs. With  MJL output devices the amp will put out close to 200 WATTS. Even higher power can be squeezed out with the right output devices an slightly higher secondaries, as LME is rated for operation upto 200V. Kit Includes (Qty- 1 No. complete Assembled Amplifier Kit with Main heat sink and Power Supply Kit): All components are 100% original and reputed Brands All resistors (1% metal film) (Manufacturer:- Thakor / Watts) Power resistors  (Manufacturer:- Precision  ) Fastron connectors Silpad 400 insulators Silver Mica compensation capacitors (Manufacturer:Panasonic/Wima) MJE drivers (Manufacturer: On Semiconductor) MJL output transistors Imported from UK (Each Transistor come with 200 Watt) All Film & Electrolytic Capacitors  (Manufacturer: Nichicon / Panasonic) LME No.  Imported from UK  (Manufacturer: On Semiconductor)  Heat sink for LME Note:- Amplifier Output Power 300 Watt @ 8 Ohms and 450 Watt @ 4 Ohms (Power supply Transformer required: Volt 5 Amps- NOT INCLUDED) With Power Supply Board for this amplifier kit (4 x uf 100 Volt ELNA Capacitors) Contact details:- E-Mail: Any Query Please call on: Mob. No. 

High Ampere (5A) Dual Motor Driver H-Bridge Kit   Package includes: § 1x High ampere (5A) Dual Motor Driver PCB § 8x Power Transistors § 4x NPN biasing transistors (2N) § Resistors: 10k Ω (0.25W), 3.3k Ω (0.25W), W), 1k Ω (0.5W) § Capacitor: 1x µf § 8x 1N diode § 3x 5mm screw terminal § 4x LED     Description: §    The motor driver module is based on MOSFETs (Metal Oxide Semiconductor Field Effect Transistor) and power transistors delivering current  up to 5A  (max current). §    The module has 4 inputs(with PWM support): “ IN A ”, “ IN B ”, “ IN C ”, “ IN D ”. §    The working logic is given below:   IN A IN B Direction 0 0 Brake 0 1 CW 1 0 CCW 1 1 Brake

Internet of Things (IOT) Starter Kit * With Arduino Mega , W Ethernet Shield * Temperature Sensor, Light Sensor, 4 digit 7 segment display, Breadboard * Transistor, Diode, Relay, Resistors, LEDs, Trim pot, DUPONT Jumper cables * DC Power Adapter, Network Cable, USB Cable * Quick Component Reference book * Companion CD with ready to use code * 15 Projects with step-by-step instructions * E-mail support for clarifications Best Electronic Kit at reasonable price for learning IOT! (Limited Stock)

Internet of Things (IOT) Starter Kit * With Arduino Mega + W Ethernet Shield * Temperature Sensor * Light Sensor * 4 digit 7 segment display * Breadboard & DUPONT Jumper cables * Relay, Trim pot * Transistor, Diode, Resistors * Red, Green and Yellow LEDs * DC Power Adapter, Network Cable, USB Cable + * Quick Component Reference book * Companion CD with ready to use code + * 15 Exciting projects with step-by-step instructions [e.g., Controlling home lights through mobile phone  Sending email alerts & twitter posts through Arduino Internet based digital clock and so on...] These projects lay foundation for advanced IOT implementations Best Electronic Kit at reasonable price for learning IOT! (Limited Stock)

Call for discounts upto 6% This a True 500w RMS Audio Amplifier, Needs a Transformer, 7 Amp. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description 8 Transistor Stereo Amplifier, High Power 500w RMS output. The best part about the kit is that it is made of individual components and not IC's, which means if any thing goes wrong it can be easily serviced and components can be replaced instead of trying to find a Specific IC. Also all the powersupply components are built in, Simply need to add a Transformer and it will work. You can also add external volume and bass controller if you need to.  Please make sure to add a extra Fuse

Call for discounts up to 6% (i.e. Rs /-).....{ On Payment through select bank                                                                                  Credit and Debit Cards } With Bass, Treble and Volume Control This a True 500w RMS Audio Amplifier, Needs a Transformer, 6.5 Amp. Also works on amp transformer if toroidal. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Also the product assembling takes approx one week. Product Description 8 Transistor Stereo Amplifier, High Power 500w RMS output. The best part about the kit is that it is made of individual components and not IC's, which means if any thing goes wrong it can be easily serviced and components can be replaced instead of trying to find a Specific IC. Also all the powersupply components are built in, Simply need to add a Transformer and it will work. You can also add external volume and bass controller if you need to. Please make sure to add a extra Fuse

Internet of Things (IOT) Starter Kit * With Arduino Mega (More functions compared to Arduino UNO R3) * W Ethernet Shield (Connect Arduino to Internet / Cloud without PC) * Temperature Sensor * Light Sensor * 4 digit 7 segment display * Breadboard * DUPONT Jumper cables x 20 * Relay 5v * Trim pot 10k * Transistor 2N * Diode 1N * Resistor 220 ohm x 10 * Resistor 10k x 10 * Red, Green and Yellow LEDs (3 + 3 + 1) * DC Power Adapter (9v 1A) * Network Cable RJ 45 * USB Cable (Type A - B) * Quick Component Reference book (Hard copy) * Companion CD with ready to use code * 15 Exciting IOT projects with step-by-step instructions [e.g., Control Home lights with mobile phone, e-mail alert, Twitter post from Arduino, saving sensor data

Please Visit our Shop: Chips-N-Boards   http://stores..in/Chips-N-Boards For Microcontroller Programmers, Robotics Stuff,Embedded Products and other Electronics Components. For more assistance call: +91-, New PACK OF 5 PCS. 2N Transistor - Metal Package For Electronic projects,DIY Kits NPN bipolar junction transistor Used for general purpose low-power amplifying switching applications Designed for low to medium current Low power Medium voltage Operate at moderately high speeds

    Other Items Feedbacks About Us Contact Us Add To Favorites   16 Items Assorted Electronics Items Kit  for  Beginners  and Professional Hobby Electronic Circuits & DIY Kits  Includes Digital Multimeter - 1Pc GL12 BreadBoard - 1Pc 40x1 Berg Strip -Male - 1Pc 40x1 Berg Strip -Female - 1Pc Jumper Wires -30 pcs (10 Pc Male-Male,Male-Female,Female-Female Each) Mix Resistance Pack of 1/4 Watt - 100 Pcs Mix Electrolytic Capacitor Pack  - 50 Pcs Mix Ceramic Capacitor Pack  - 50 Pcs 9V Battery Snap Connector - 1Pc 9V Battery (Make: GP) - 1Pc LM7805 - 2 Pc Banana Jack- Crocodile Clip Cable - 1Pc 2 Pin Micro Tactile Switch - 4Pc Red,Green,Yellow Led 5mm - 5Pc Each 1N4007 Diode - 10 Pc BC547,BC557 Transistor -4 Pc Each Our Other Products Images Gallery   Note "Anything not listed is excluded" Payment is accepted by Paisa Pay only. Paisa Pay is the Safest mode of Payment. Shipping will be done within 1 -3 working days (Else you will be intimated) under Powership hence your parcel will be booked under Fedex/ Bluedart,if your location is not covered under powership we will send by Speedpost/Indiapost.Kindly check your pin code before placing the order. Please enter correct / complete serviceable address while placing your order, As we will not be able to change an address after order confirmation with Powership.   Buyer has to pay the OCTROI charges where ever it's applicable. Courier may also levy service charge on Octroi Payment. After you receive the item, DO NOT FORGET to CONFIRM THE ITEM RECEIPT. Check your pin code for Fedex: Click Here Check your pin code for Bluedart: Click Here      For any type of support Please feel free to contact: 0755-2420735, +91-9039873050 (10:30AM-6:30PM, Monday-Saturday) email: chipsnboards@gmail.com .in Toll free Helpline: 1800 209 3229 FREE ITEM  MUST BE RETUNED WITHIN:    7 DAYS REFUND WILL BE GIVEN AS:  Merchandise Credit Return Policy details:  If the items are not as described, we will offer a Merchandise Credit. In most cases this will be minus shipping and fees, although if it was a blatant mistake by us we'll pick up everything. Bottom line, we want you happy! We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. We give you the information that is supplied by our vendors. If this information is incorrect, please email me before leaving negative feedback. This is not a retail store. All sales are final. We do not offer refunds on any item unless is grossly misrepresented. If a refund is given it will only be for the cost of the item. Shipping and Handling is non refundable. Restocking and other fees may be charged. If there is a problem, we can work together to resolve the problem. I have always been extremely fair and always try to work with my reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! I strive for positive feedback, harmonious relations and even some friendships. We will make every attempt possible to resolve the issue if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Electronic components /spare parts doesnot cover any sort of warrenty (either operational or manufacturer) unless stated otherwise To avail the Manufacturer Warranty, the buyer needs to contact the respective service centre of the company. To avail the Seller Warranty, the buyer needs to send the product to the seller, with Proper packing & Shipping Cost. Most Important Please Leave Positive 5 star detailed feedback, its very Important for us.

6X7 Segment Display - Common  Cathode  (LT543 or Alike) 6 Pcs of BC Transistor 10 Pcs of 470 ohm 1/4 W resistance   Please Clear Any Doubts "BEFORE" Buying any products form us. Fast Shipping via*   * Under 's Power-Ship program Please Check your (destination) pin-code serviceable at respective courier company or not other vise we will different courier company /Indian Speed post Please Click on Images to View