Printed circuit board

Package Includes: "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[- x 8.5 cm General Purpose Printed Circuit Board (2 Pieces) Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  by TermCoach" style="z-index: ;"> sales KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91   between AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

  Package Includes: "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">14.5 x 8.5 cm General Purpose Printed Circuit Board (2 Pieces) Feedback: We provide good quality products & maintain high service standards.  We strive for 100% positive feedback for our work.  For assistance, please contact us on  Message  or  by TermCoach" style="z-index: 2147483647;"> sales KitsGuru.com Providing Neutral or Negative feedback will not solve anything.  Please contact us and we will try to solve your issue within 48 hours. Contact us on our dedicated Line  +91 9793202258  between 10:00AM - 7:00PM Customer Support: Do you have doubts regarding any of our products?  Any of our product is not working?.  Do you want to order

200WATT R.M.S MOSFET POWERED FULLY ASSEMBLED CIRCUIT BOARD (photo is for reference you get a new one of same type when you order     specification   POWER SUPPLY: to volt DC(MAX)  ,6Amperes                                      out put -200watt R.M.S MAX,20hz-150hz(FAN MUST BE USED FOR CONTINUOUS OPERATION) LOW PASS FILTER AVAILABLE ITEM ID TOROIDAL TRANSFORMER AVAILABLE ITEM ID DC PROTECTION BOARD UPTO WATT RMS HANDLING ITEM ID                                   150WATT,350 WATT,WATT R.M.S SUB AMPS ALSO AVAILABLE  PLEASE CONTACT ME       IF you have any questions feel free to contact my whaatsapp no;(FULLY ASSEMBLED CAR VERSION AVAILABLE)

Feature   -- PCB Holder For Mobile Phone Repair tool. --- New --- Fast Shipping From US. 1. Universal holder for mobile phone PDA MP3 repair. 2. Theree pieces bayonet can be move, you can choose the best position to holer your circuit board. 3. You can stop the PCB holder

CRT TV with Videocon circuit board but. a small repair of 500 - 800 rupees required

Blue Uno Circuit Board, ultrasonic sensor,mq-5 gas sensor,esp8266 wifi module, yet not used

1-6 layers of flex circuit boards From 70µm total thickness, 12-35µm copper thickness Surface ENIG or OSP with or without stiffeners 100*160mm,Quantity:10 pcs 1 layer PCB series $31.911/EACH 2 layers PCB series $34.978/EACH 4 layers PCB series $59.734/EACH We can supply PCBs as per the customers requirement in quantity and quality at reasonable time schedule. Please share your requirement to Email id show contact info or call us at +919591349988

This is a high-quality PCB (printed circuit board) for TI LM4780 60 watts + 60 watts stereo audio amplifier IC. You can build a very high-quality professional Audio Amplifier at a fraction of the cost of Commercial Amplifiers. The board is without parts and IC. This is a stereo PCB. You can buy audio IC from the market. If you need parts also please let me know. Thanks

Rev AA WD Controller Board My Book Essential 1TB/2TB/3TB USB 2.0 Description: Western Digital My Book Essential USB 2.0 This board is compatible with 1TB, 2TB & 3TB Hard Drives WD My Book Essential External Hard Drive Control Board Part No: PCB REV. AA (Printed on white sticker) Part No: PCB REV. P1(Printed on the circuit board) Support 20GB ~ 500GB 1TB, 1.5TB, 2TB of 3.5" SATA HDD to USB 2.0 Quantity: 1pcs Item condition: Pulled from new device! 99% of new,GOOD PRICE FAST SHIPPING!!!! Tested 100% work! Important note: If you hard disk have some problem or bad, It can't recover any data! Please see all details and shipping policy before purchase.Thanks! Details No hard drive included

Product Contents 1. Enhanced Breadboard Power Supply (Input Voltage 6.5V to 12V, Output Violate 3.3V or 5.0V via switches) 2. MB-102 Color breadboard 3. 65 Root Breadboard Cables Product Features A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. Parts will not be damaged so they will be available for re-use afterwards. 100% Brand New & High Quality! Reusable for fast build a prototype of an electronic circuit Each unit will accept transistors, diodes, LEDS, resistors, capacitors and virtually all types of components No soldering required Can modify or revise the circuits easily Similar prototyping printed circuit boards An invaluable tool for experimenting with circuit designs whether Superior Quality, Free Shipping

Micro SD Storage Board adap Micro SD TF Card Memory Shield Module SPI Fr Arduino Description 1 Support Micro SD Card, Micro SDHC card (high-speed card)  2 The level conversion circuit board that can interface level is 5V or 3.3V  3 Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board  4 Communication interface is a standard SPI interface  5 4 M2 screw positioning holes for easy installation  6 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;  7 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply  8 Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal  9 Micro SD card connector: yes since the bomb deck for easy card insertion and removal  10 Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination  11 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin  V voltage regulator circuit: LDO regulator output is 3.3V level converter chip, Micro SD card supply  13 Level conversion circuit: Micro SD card into the direction of the signal is converted to 3.3V, MicroSD card interfaces to control the direction of the MISO signal is also converted into 3.3V, general AVR microcontroller system can read the signal;  14 Micro SD card connector: a self- bomb deck, easy card insertion.  15 Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination; Package Info 1Pc X Micro SD Storage Board  Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Description: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g   Package Included: 1PCS*Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Welcome to ask any question Mob- , Email Your feedback is important for us to grow our business on , so please  leave Positive feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino     Product information Features:   Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,  VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g Shipping content: 1x Micor SD TF Card Shield Expansion Board for Arduino/PIC/ATMEL

LMTF AMP board KIT+Rectifier filter power KIT + Tone control Kit Introduction:   LM is a single channel high-performance Stereo power amplifier IC produced by National Semiconductor Corporation(NS).The maximum continuous output power is up to 60W.From the Introduction till now,it's widely loved by vast audio fans     This power amplifier adopts power board & amplifier board Independent design,for the amplifier part,each channel shares one circuit board,every set includes one power board & 2 single channel power amplifier boards.  All the components on the board are carefully selected,uF/63V capacitors as filter capacitors,35A large current rectifieer bridge,can ensure the powerboard long-term full load working.Other capacitors choose Epcos, Keltron, etc. famous brand capacitors.1% copper pin film resistors. The PCB board adopts single side circuit board, Black boars,reasonable layout design,looks beautiful & generous. In Package  2 X LM mono boards 1 X Hi Fi Tone control board 1 X uf 63v power supply board 1 X 15v regulated power supply board 

Description The module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files. Arduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write Features： Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination; Specification: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Power supply: 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communication interface: Standard SPI interface Positioning holes: 4 M2 screw positioning holes Package included: 1 x  Mciro SD/TF Card Memory Shield Module