Roland expansion board

Ethernet W Shield Network Expansion Board w/ Micro SD Card Slot for Arduino (Q022) Product Features:. The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino. The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. Requires an Arduino board (not included). Operating Voltage 5V (supplied from the Arduino Board) Product Features The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W ethernet chip (datasheet). The Wiznet W provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield The most recent revision of the board exposes the 1.0 pinout on rev 3 of the Arduino UNO board for further development There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). Ethernet shield network expansion board for Arduino The Arduino ethernet shield allows an Arduino board to connect to the internet It is based on the Wiznet W ethernet chip (datasheet) The Wiznet W provides a network (IP) stack capable of both TCP and UDP It supports up to four simultaneous socket connections Use the Ethernet library to write sketches which connect to the internet using the shield Requires an Arduino board (not included) Operating Voltage 5V (supplied from the Arduino Board) Ethernet Controller W with internal 16K buffer Connection Speed Mb Connection with Arduino on SPI port

Sensor Shield v5.0 expansion board for arduino electronic building blocks robot accessories Sensor Shield V5 expansion board Latest Sensor Shield V5.0 sensor expansion board to retain the advantages of version V4.0 on the basis of still only stack design, PCBImmersion Gold processing technology, the motherboard is not only the Duemilanove 2009 controller digital and analog interfacesequenceform of steering gear line extension, but also ad hoc IIC interface 32 servo controller Interface Bluetooth module communication interface, SD card module communication interface, the APC220 wireless RF module communication interface, the RB The URF v1.1 ultrasonic sensor interface12864serial and parallel interfaces, independent expansion of a more easy-to-use convenience. For beginners, you do not have a headache forthe cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit can easily connect thecommonly used sensor, a sensor requires only a common 3P the sensor cable (regardless of digital cable and analog cable), after the completion ofthe circuit connection, the preparation of the corresponding program downloaded to the Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works. Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

Description. "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">Screw Shield V1.0 terminal expansion board is compatible UNO R3  Technical parameters: 1 Piece new "", INDEX('Name Master'!C[0]:C[0], MATCH(R[0]C[-1],'Name Master'!C[-1]:C[-1],0)),"")">Screw Shield V1.0 terminal expansion board is compatible UNO R3 

Sensor Shield V5 Expansion Board supports the latest Arduino R3 PIN.You Can Easy Connect this device To Expansion Board For analog sensors it come with URM 04 Interface comes with heavy Quality SD Module Sockets Apc220/ Bluetooth Sockets

Sensor Shield V5 Expansion Board supports the latest Arduino R3 PIN.You Can Easy Connect this device To V5Expansion Board For analog sensors the v5 sensor board come with URM 04 Interface comes with heavy Quality SD Module Sockets Apc220/ Bluetooth Sockets v5SensorShieldBoard,V5ExpansionBoard,V5 Sensor Shield,sensor shield Board Buy Link is here https://robotbanao.com/products/sensor-shield-v5-expansion-board-for-arduino

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino     Product information Features:   Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground,  VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g Shipping content: 1x Micor SD TF Card Shield Expansion Board for Arduino/PIC/ATMEL

Description This IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. used for Arduino Nano direct, if your seal the Pin of the board also Compatible Arduino Duemilanove and UNO R1. Brand new and high quality. Compatible with Arduino Nano v3. 14 I/O Pin (servo type with GND, power and signal 8 analog Pin with power output and GND 6 PWM Pin 1 Servo power input 5 I2C expansion Pin AREF output Technical parameters: 3.3V output Board size:5.6x5.2cm(approx)   Package Contents: 1 x I / O Expansion Sensor Shield Feedback: We provide good quality products & maintain high customer service standards.  We strive for 100% positive feedback for our service.  For assistance, please contact us on  Message  or  If you are satisfied with our service we request you to please leave us a positive feedback and 5 Star DSR ratings

DESCRIPTION General Brand MatLogix Quantity 1 Color Green Material PCB Features -Zigbee USB Breakout - Easy to connect with PC and Laptops. -On board All Pin Expansion header. -On board LED for RX, TX and Power. Specification Power Supply Input USB Powerd. Interface USB to Serial -on board serial Usb to Serial converter IC Chipset CP Datasheet / Application Discription This is a simple to use, USB to serial base unit for the Digi XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. This board also breaks out each of the XBee s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee s extended functionality, you can solder some header pins into those, or even just solder some wire. USB Driver - CP Dimensions & Weight Dimensions Weight 100 g Packing List 1 x Zigbee Explorer Board - USB. 1 x USB A type to B type Cable. We deliver these products In Kirti Nagar, Connaught Place, Patel Nagar, Bhagirath Palace, Karol Bagh, Nehru Place, Laxmi Nagar, Lajpat Nagar, Pitampura, Khan Market, Paharganj, Sarojini Nagar, Noida, Vaishali, Faridabad, Ghaziabad, Gurgaon and Delhi NCR. For more information, please contact: MatLogix Technologies Pvt. Ltd. RZ- A/59, Second Floor, Street No. 4, Near Hotel The Grace, New Delhi - Call: , E-mail id: Visit: http://matlogix-technologies.shopclues.com/

ROBOT CONTROLLER AND 4 60 RPM DC MOTORS The Rhino Robot control board is versatile and expandable platform for robotics. Due to its expansion capabilities the board can be used to control all robots starting from beginners robot to advanced robots with multiple functionality. The board is compatible to 6-25VDC input compared to all robot control boards available which accepts inputs just up to 12VDC. It has onboard two 5Amp motor drivers MC and expandable to four motor drivers onboard. The motor drivers have inbuilt protection for overheating so you would not see your motor drivers burnt

Intel® Desktop Board Pegatron IPM41 D3 LGA 775 Socket Board  Intel® Core™2 Quad Processor Q8200  (4M Cache, 2.33 GHz, 1333 MHz FSB) DDR3 2GB RAM 1333MHz Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  http://support.hp.com/bg-en/document/c02185182 Motherboard description Manufacturer's motherboard name: Digitron Brazil IPM41-D3 HP/Compaq name: Pau Brazil-GL6 Form Factor Micro-ATX: 24.5 cm (9.6 inches) x 19.81 cm (7.8 inches) Chipset Intel G41 Express Front-side bus speed 1333/1066/800 MHz Processor upgrade information Motherboard supports the following processor upgrades: Core 2 Duo E8xxx series (W) Core 2 Duo E7xxx series (W) Intel Pentium (W) E5xxx series with Dual Core Technology Celeron Dual Core (C) E1xx0 series Memory upgrade information Dual channel memory architecture Two DDR3 DIMM (240-pin) sockets Supported DIMM types: PC3-8500 (DDR3-1066) Systems may be manufactured with PC3-10600. These modules will run as PC3-8500 Non-ECC memory only, unbuffered Supports 2GB DDR3 DIMMs Supports up to 4 GB on 64 bit PCs Supports up to 4 GB* on 32 bit PCs *32-bit operating systems cannot address a full 4.0 GB of memory. Video Integrated graphics using Intel GMA x4500 Audio Integrated Realtek ALC662 Audio Network LAN: 10-Base-T Expansion Slots One PCI Express x16 One PCI Express x1 Two PCI I/O Ports Back I/O ports Figure : Back I/O panel PS/2 mouse port PS/2 keyboard port Parallel port Serial port Video Graphics Adapter port USB 2.0: 4 RJ45 Network (LAN) Audio: Line

Intel® Desktop Board Pegatron IPM41 D3 LGA 775 Socket Board  Intel® Core™2 Duo Processor E6850  (4M Cache, 3.00 GHz, 1333 MHz FSB) DDR3 2GB RAM 1333MHz Intel Fan Back Panel is Available No Box and No Driver CD Available About Board:  http://support.hp.com/bg-en/document/c02185182 Motherboard description Manufacturer's motherboard name: Digitron Brazil IPM41-D3 HP/Compaq name: Pau Brazil-GL6 Form Factor Micro-ATX: 24.5 cm (9.6 inches) x 19.81 cm (7.8 inches) Chipset Intel G41 Express Front-side bus speed 1333/1066/800 MHz Processor upgrade information Motherboard supports the following processor upgrades: Core 2 Duo E8xxx series (W) Core 2 Duo E7xxx series (W) Intel Pentium (W) E5xxx series with Dual Core Technology Celeron Dual Core (C) E1xx0 series Memory upgrade information Dual channel memory architecture Two DDR3 DIMM (240-pin) sockets Supported DIMM types: PC3-8500 (DDR3-1066) Systems may be manufactured with PC3-10600. These modules will run as PC3-8500 Non-ECC memory only, unbuffered Supports 2GB DDR3 DIMMs Supports up to 4 GB on 64 bit PCs Supports up to 4 GB* on 32 bit PCs *32-bit operating systems cannot address a full 4.0 GB of memory. Video Integrated graphics using Intel GMA x4500 Audio Integrated Realtek ALC662 Audio Network LAN: 10-Base-T Expansion Slots One PCI Express x16 One PCI Express x1 Two PCI I/O Ports Back I/O ports Figure : Back I/O panel PS/2 mouse port PS/2 keyboard port Parallel port Serial port Video Graphics Adapter port USB 2.0: 4 RJ45 Network (LAN) Audio: Line

Biostar G41D3C Ver. 7.x LGA 775 Socket Board Support DDR3 RAM Intel® Core™2 Quad Processor QM Cache, 2.33 GHz, MHz FSB) 2GB RAM DDRMHz Intel Fan Back Panel is Available No Box and No Driver CD Available No return if your RAM or Processor not supported About Board: http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=518 Chipset Intel G41 / ICH7 CPU SUPPORT Intel® Core™2 Quad Processor Intel® Core™2 Duo Processor Intel® Pentium® Dual-Core Processor Intel® Celeron® Dual-Core Processor Intel® Celeron® D Processor Intel® Celeron® Processor 400 Sequence Maximum CPU TDP (Thermal Design Power): 95Watt FSB Support FSB MHz MEMORY Support Dual Channel DDR(OC)/ MHz 2 x DDR3 DIMM Memory Slot Max. Supports up to 8GB Memory Note: FSB800 CPU only support DDR EXPANSION SLOT 1 x PCI-E x16 Slot  1 x PCI-E x1 Slot 1 x PCI Slot STORAGE 2 x SATA2 Connector  1 x IDE Connector  USB 4 x USB 2.0 Port 2 x USB 2.0 Header LAN Atheros AR Controller INTEGRATED VIDEO Intel Graphics Media Accelerator X. Support RGB with max. resolution x Hz Max. shared memory MB(DVMT)  * Supports DX10 * The Max shared memory size will be available only when 4GB memory or more installed on Motherboard under the 64-bit OS. CODEC VIA VTB 6-Channel HD Audio REAR I/O 1 x PS/2 Mouse 1 x PS/2 Keyboard 4 x USB 2.0 Port 1 x VGA Port 1 x RJ-45 Port 3 x Audio Connector INTERNAL I/O 1 x Printer Header 2 x USB 2.0 Header 2 x SATA2 3Gb/s Connector 1 x IDE Connector  1 x Front Audio Header 1 x Front Panel Header 1 x CPU Fan Header 1 x System Fan Header DIMENSION Micro ATX Form Factor Dimension: 22.5cm x 17cm (W x L) OS SUPPORT Support Windows XP / Vista / 7 / 8 FEATURES Windows 8 Ready Supports Solid capacitor Supports BIOS-Flasher

Asus P5G41T-M LX Motherboard LGA 775 Socket Intel® Core™2 Duo Processor E6850 (4M Cache, 3.00 GHz, 1333 MHz FSB) 2GB RAM DDR3 1333MHz Intel Fan Back Panel is Available No Box, No Driver CD Available Note: On board sound is not working, I will give you one USB sound card. About Board: https://www.asus.com/us/Motherboards/P5G41TM_LX/  CPU Intel® Socket 775 Core™2 Quad/Core™2 Extreme/Core™2 Duo/Pentium® dual-core/Celeron® dual-core /Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Support Intel® 45nm Multi-Core CPU  *Refer to www.asus.com for Intel CPU support list  Chipset Intel® G41 /ICH7 Front Side Bus 1333/1066/800 MHz Memory 2 x240-pin DIMM, Max. 8 GB, DDR3 1333(O.C.)/1066/800 Non-ECC,Un-buffered Memory Dual Channel memory architecture ** Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  *** When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel GMA X4500 graphics  Maximum shared memory of 1G  Supports RGB with max. resolution 2048 x 1536 (@75Hz)  Supports Microsoft® DirectX® 10 Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports LAN PCIe Gb LAN Audio ALC887 8-Channel AUDIO CODEC  *Choose the chassis with HD audio module

The PIC DEVELOPMENT board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18-, 28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices.  It can be used as a standalone demonstration board with a programmed part. Alternatively, it can be used with an in-circuit emulator (for example, MPLAB® Real ICETM) or with an in-circuit programmer/debugger (such as MPLAB® ICD 3 or PICkitTM 3). Microchip offers a bundle of the PICDEM 2 PLUS and the MPLAB® ICD 3, called the MPLAB® ICD 3 Evaluation Kit (with PICDEM 2 Plus), product number DV164036. Sample programs are provided to demonstrate the unique features of the supported devices.       Key Components  LCD display Interface 40 pin socket 4x LEDs four 7 segment display  RS232 interface to PC 12 V adapter connector GPIO Pin connector 4 * 4 switch matrix On-board external oscillators Four push button switches for external stimulus and reset Variable voltage input for ADC simulation Connectivity options Programmer/debugger connectivity using MPLAB ICD 3, MPLAB Real ICE and PICkit 3 PICkitTM Serial Connector for analysis of serial communications peripherals such as SPI or I2C Active RS 232 port Expansion

Asus P5G41T-M LX Motherboard LGA 775 Socket Intel® Core™2 Quad Processor Q6600  (8M Cache, 2.40 GHz, 1066 MHz FSB) 2GB RAM DDR3 1333MHz Intel Fan Back Panel is Available No Box, No Driver CD Available Note: On board sound is not working, I will give you one USB sound card. About Board: https://www.asus.com/us/Motherboards/P5G41TM_LX/  CPU Intel® Socket 775 Core™2 Quad/Core™2 Extreme/Core™2 Duo/Pentium® dual-core/Celeron® dual-core /Celeron® Processors  Compatible with Intel® 05B/05A/06 processors  Support Intel® 45nm Multi-Core CPU  *Refer to www.asus.com for Intel CPU support list  Chipset Intel® G41 /ICH7 Front Side Bus 1333/1066/800 MHz Memory 2 x240-pin DIMM, Max. 8 GB, DDR3 1333(O.C.)/1066/800 Non-ECC,Un-buffered Memory Dual Channel memory architecture ** Refer to www.asus.com or user manual for Memory QVL (Qualify Vendor List)  *** When installing total memory of 4GB capacity or more, Windows® 32-bit operation system may only recognize less than 3GB. Hence, a total installed memory of less than 3GB is recommended. Expansion Slots 1 x PCIe x16  1 x PCIe x1  2 x PCI VGA Integrated Intel GMA X4500 graphics  Maximum shared memory of 1G  Supports RGB with max. resolution 2048 x 1536 (@75Hz)  Supports Microsoft® DirectX® 10 Storage Southbridge   1 xUltraDMA 100/66/33  4 xSATA 3 Gb/s ports LAN PCIe Gb LAN Audio ALC887 8-Channel AUDIO CODEC  *Choose the chassis with HD audio module