Servo controller robotics

Servo Tester Specifications Voltage consumption: DC4.8-6V Size: 48 x 42 x 17mm Original box: NO Color: Blue Item size: mm Net weight: 7g Features: CCPM Servo Consistency Master / Servo tester The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver. There are 3 modes to check servos or ESC: Manual mode: turn the knob with different speed, check the reaction time. Neutral mode: make the servo go back to the neutral point. Automatic "window wiper" mode: make the servo swing like a window wipers

This pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up & downwards around 150°.  It also comes fully option to directly attach two  Micro Servos  (SG-90 or SG-92 type) and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Since common micro sized servos directly attach to the mount, you can use any microcontroller or driver to control the pan/tilt mount. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion. It is perfect for controlling through an Arduino or any micro controller. Perfect for general electronics and robotics projects. Note: The mount does't come with the servos. Servos will have to be purchased separately. 

Red Phase Engineers One of the leading quality manufactures of wide range of Servo Voltage Stabilizer, Industrial Voltage Controller, Voltage Stabilizer, Isolation Transformer, Voltage Transformer designed & manufactured by highly trained engineers.

RED PHASE ENGINEERS One of the leading quality manufactures of wide range of Servo Voltage Stabilizer, Industrial Voltage Controller, Voltage Stabilizer, Isolation Transformer designed & manufactured by highly trained engineers. The name trusted all over India since 1987. This trust is built over Shear dedication, hard work & Commitment to quality. The learning acquired over 27 year has been harnessed to offer superior quality product at competitive price.

Bracket used to mount a camera and rotate it 180deg and tilt around 150Deg. Refer to this video for demo and building instructions https://www.youtube.com/watch?v=2LltXMHVuDs Servo motors are not included Best quality and superb finishing, with screws required for assembly Within 24hr shipping on weekdays and next business day shipping on holidays and weekends. Shipping is done via DTDC, Bluedart or Indiapost(for rural and remote locations only where the other services are not available) This pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up & downwards around 150°.  It also comes fully option to directly attach two  Micro Servos  (SG-90 or SG-92 type) and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Since common micro sized servos directly attach to the mount, you can use any microcontroller or driver to control the pan/tilt mount. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion. It is perfect for controlling through an Arduino or any micro controller. Perfect for general electronics and robotics projects.  *We ship maximum within 24hrs after receiving payment through DTDC courier and Speed post for remote locations * We ensure safe packing of the item so that it can reach safely to the buyer. For any queries regarding the product, transaction, delivery, bulk ordering, combo ordering or anything else please send a P.M or a mail to Will reply A.S.A.P. Thank you.

CCPM Servo Consistency Master / Servo tester The device can also be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver. There are 3 modes to check servos or ESC Manual mode: turn the knob with different speed, check the reaction time. Neutral mode: make the servo go back to the neutral point. Automatic "window wiper" mode: make the servo swing like a window wiper to its max end points. It can connect 1-3 servos simultaneously. You can also connect 1-3 ESC to test and compare their reaction time respectively. It can also connect to servo on airplanes and neutral your servo saving a lot of time. Voltage consumption: DC4.8-6V Size: 48 x 42 x 17mm Weight: 31.5 

Overview                                            The IdeaFires LaunchPAD is a low cost controller board which is based on the ATmega8 along with L29D H-bridge motor driver. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a power jack, an ICSP header, and a reset button. It contains everything needed to support the micro-controller; simply connect it to a 12V, 1A AC-to-DC adapter or battery of 12V, 1A to get started. L293D is a typical Motor driver which allows DC motor to drive on either direction.This kit is an easy and low cost way to get started with microcontrollers.The controller comes with Inbuilt BootLoader that makes it easily programmable and do not need any prerequisite drivers for the board. On board there is one In - Sytem Programming Interface which can be used for programming the microcontroller using AVR USBASP Programmers. The board takes Input which can be either Analog or Digital

THIS FLIGHT CONTROLLER HAS MORE SENSORS THEN ANY OTHER FLIGHT CONTROLLER LIKE cc3d,kk,naze32 It means More Controlling Power Flight Modes (1) ANGLE                                       (2) HORIZON (3) MAG (4) BARO (5) HEAD's FREE (6) HEAD ADJUST (7) GPS POSITION HOLD (8) GPS RETURN TO HOME + (9) FAIL SAFE - If Receiver lost communication with Transmitter Description: The Crius SE 2.5 flight controller board is based and comes pre-programmed with the open source MultiWii flight controller system. This board is able to control various radio control aircraft including quad, hex, and octocopter designs. Its excellent stability allows for fully autonomous flight with FPV or any kind acrobatics. The board includes a broad array of sensors consisting of a triple axis accelerometer, triple axis gyroscope, triple axis magnetometer (compass), and a barometer. Header pins for allow convenient interface to an RC receiver, ESC's, and servo's. Additionally there are also serial and I2C interfaces to allow add-ons such as FTDI USB interface, Bluetooth, GPS*, and OLED/LCD displays. The board is also fully compatible with the MultiWii configuration software and Android MultiWii Ez app (via Bluetooth) providing wireless monitoring and control

before placing the order call me Features: - Supported MegaPirateNG and MultiWii firmware - Up to 8-axis motor output - 8 input channels for standard receiver - 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry - 2 servos output for PITCH and ROLL gimbal system - A servos output to trigger a camera button - 8 Analog port for Airspeed Sensor/Current & Voltage Sensor/LED controller - User-defined pads D & PG1~PG5 - A I2C port for extend sensor or device - Separate 3.3V and 5V LDO voltage regulator - Onboard 16Mbit Dataflash chip for automatic datalogging - ATMega AU Microcontroller - MPU axis gyro/accel with Motion Processing Unit - HMCL 3-axis digital magnetometer - MSBA01 highprecision altimeter - FT232RQ USB-UART chip and Micro USB receptacle - PCADP1 logic level converter for I2C Match the standard of RoHS Flight modes for Multiwii One of the following basic mode - Acro - Level - Alt Hold - Head Lock - Optional mode - HeadFree (CareFree) - GPS Hold (Need GPS receiver or Extend Board) - GPS Back to home position (Need GPS receiver or Extend Board) Flight mode for MegaPirate - Acro - Alt Hold - Simple - Loiter (uses GPS) - Guided (uses GPS) - Position (uses GPS) - Circle (uses GPS) - RTL (uses GPS) - Auto(uses GPS) - Follow Me(uses GPS) Input power selection One of the following way - Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed. - Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed. When using Extend Board, AIO PRO must be powered from the extend power port. General Dimension: 50mmX50mm Height: 11.6mm Weight: 14.2g Fixing hole spacing: 45mm Hole diameter: 3mm Package content ALL IN ONE PRO Flight Controller x 1 3Pin to 1Pinx3 cable 100mm x 3 3Pin to 3Pin cable 100mm x 1 Molex 1.25mm 4Pin cable 100mm x1 Molex 1.25mm 6Pin cable 100mm x1 Molex 1.25mm 8Pin cable 100mm x2

I have rc controller and receiver for 5000 Also have components 1. Bldc motor 2. ESC controller 3. Servo motor 4. Battery tester 5. Flight simulator

Description:  KKMulticopter Description   100% Brand new KKmulticopter V5.5 controller Board,Quadcopter V2.9 program 1. Simple structure, Easy to Maintain and Debug Control 2. with 3 pcs gyros, relying on potentiometer adjust gyro sensitivity. 3. Full servo signal output, support normal ESC / analog servo 4. Support for single-axis / UFO, Y3 3-axis, Y3-type 3-axis, 4 axis, 6 axis, V22  flight mode 5. Supports 4-axis "+" and "X" flight mode, support for six-axis "HEXA6" and  "Y6" flight mode. 6. Don't need MK 4-axis PPM decoder board, the receiver can be connected  directly to the Transmitter

Recommended Setup Motor  HKV  HKV ESC 10A ESC 12A ESC Propeller:  5inch or 6inch Radio & Receiver:  4CH or More Flight Controller CC3D Flip32  or  Flip32+ APM Mini KK 2.1  etc.. Battery: 3S or 4S mAh - mAh Specification Frame Weight: Approx 102g FC Mounting Hole: There is no default mounting holes for flight controller so you need to make the holes by yourself.  Battery Strap Gap: 20mm @ M3 Front Servo Mount: 23.5x13.5mm Suitable for servos eg. SG90, MG90S etc... size servos Motor Mounting: M Suitable) Package 1 x RCX FPV260 Quad Copter A Mini Sized FPV Multi-Rotor (Barebone / Nylon Material) 1 x Set of Screw

A great rally car to bash around the neighborhood delivering the best performance vs cost around!! Shaft driven 4WD can handle just about any type of rough terrain with ease. Features a waterproof speed controller brushless motor and servo as standard. In addition the package includes both grip and drift tires for twice the fun