Solar control cm

CM is 30A solar charge controller for 48V solar power system with LCD display. If you use solar panels as a means of energy, you should be regulating the current charge

SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)  -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load.

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar.

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. IF U GOT ANY PROBLEM PLEASE CALL TO THIS NUMBER ,  BEFORE CONTACTING , WE CAN SOLVE THE PROBLEM..:)

Solar Charge controller  - 10 Amps,Double digit LED display, with timer and lighting control for home and solar lighting use. 12Volts/24 Volts- Autoselect. 120Watts/240Watts - Autoselect. Auto Day/Night Sensor / Programmer, Program Timer, PWM, MCU, Auto 12V/24V Selector Switch Overcharge protection Can be used for any panels Mono/Poly/Multi Crstalline Discharge protection Short and Open Circuit protection Full specification Provided

Description:     * Fits any car window. * Solar powered ventilation system. * Solar powered, needs no batteries. * Easy to install, just attach it on the car window. * Blows hot air out of parked car and draws fresh air in. * Great for cars that are parked for a long period of time.   Specifications:   Weather strip size: (79 x 2.2)cm Auto fan size: (15 x 6.2 x 11)cm Main material: Plastic Color: Black   Use Instruction:   1. Lower Window that will receive the most Sunlight about 4-5 inches and place solar fan on the window. 2. The solar Fan should then be centered ad slid onto the window carefully. 3. The weather strips should be measured and cut out to fit both sides of the solar fan to seal off window, then let it slid from the bottom of the window down to the air vent of the vehicle. 4. Slowly roll the window closed. 5. Recommended to have opposite side window opened a crack for better ventilation.   Note: This item does not work on dark tinted windows and it should not be used on cars that do not have a door frame above the window. It is not intended for use while driving as it may obscure your vision.   Package includes: 1 x Solar Powered Car Auto Fan 1 x Weather strip 1 x User Instruction

SOLAR-MATE MPPT SOLAR CHARGE CONTROLLER(20AMP/12V-24V) MPPT Technology Your key to solar power generation Su-Kam’s MPPT Solar Charger Controller is a system with advanced MPPT (Maximum Power Point Tracking) Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated within a battery pack, battery-powered solar device or a battery recharger. This photovoltaic charge controller is the key component

Here is the 100percent solar operated deep freezer and works on power also,excellent for pharmacy,hospitals,grocery store  • 12V DC Freezer / Chiller with 240 Litre capacity • Eco‐friendly cooling agent (R‐134a) • Adjustable interior temperature • Very low energy requirement • Highly efficient cooling • Low Maintenance • Double gasket to keep long cooling • Easy installation • Inbuilt 12V, 65Ah SMF VRLA Battery • Inbuilt Priority charge controller • Dual source battery charging by AC mains and Solar • 2X125Wp Solar Panel • Priority for solar Charging • LED Indications for Battery Level, Solar Charging, AC mains charging and Low Battery load Disconnect • MCB for ON/OFF Freezer Compressor VIBHU offers freezer unit with 240 liters capacity. Due to their energy‐efficient cooling concept, VIBHU refrigeration devices are especially suited to solar‐powered applications. The top‐quality craftsmanship guarantees a long useful life. A 11‐cm‐thick insulation layer made of polyurethane ensures minimal thermal loses. The refrigeration system is equipped with a maintenance free, Brushless DC compressor. The patented low‐frost system reduces the formation of condensation water and ice. A drainage opening at the base simplifies the cleaning of the interior. Alternate AC mains Charging of 10Amp SMPS provided with the system to facilitate charging when Solar is absent. Further, the charging can take place while generator running

This listing is for 60 amp solar charger card.      This listing  is for a  60 amp    single battery (12V)  Zero drop PWM   solar charger card  , maximum  input solar panel open  voltage is 22 V     It has 6 pair of Mosfet    ,,  It is only an assembled PCB, it has no case and connector  ,,    wiring digram  will  be marked

Description solar power emergency light lalteen   Features:    ●  The Emergency light is with built-in long-life and maintenance-rechargeable and solar.   ● During charging, please connect cable with hole into AC outlet of Emergency Light, then insert cable of AC plug into AC V power socket, the charging indicator turns on to show the charging process, which needs about 20 hours. During charging, the emergency light to both flashlight function and emergency function will not turn on, after pushing the switch up or down, while you can choose function of flashlight or emergency when power source cut off, or the AC plug is pulled out from power socket. ● To push the button is to control turning on and turning off. ●    

Item Description ---------------------------------------------------      Solar Panel of 6Volts 5Watts     Dimensions: 27.8 cm x 18.6 cm     Glass Thickness: 3.2 mm Specifications -------------------------     Rated Max Power (Pmax): 5W     Current at Pmax (Imp): 0.58A     Voltage at Pmax (Vmp): 8.7V     Short-Circuit Current (Isc): 0.62A     Open-circuit Voltage (Voc): V     Normal Operating Cell Temp (Tnoct): -40C~50°C Feature -----------------      High-quality cells     Wide power-range     Tempered glass for rugged protection.     ISO certified manufacturing facility     IEC certification by Euro Test and TUV     Competitive price-performance ratio

Solar Charge Controller 30Amp/12V-24V-48V PWM Technology Su-Kam’s Solar Charger Controller is a system with advanced MOSFET based PWM Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated one within a battery pack, battery-powered solar device or a battery recharger.  The controller is for off-grid solar systems. This protects the battery from getting over charged using the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance.  The comprehensive self-diagnostics and electronic protection functions prevent damage from installation mistakes or system faults. Features: Excellent EMC design Nominal system voltage automatic recognition High efficient Series PWM charging, increases battery life and improves the solar system performance Use MOSFET as an electronic switch, without any mechanical switch Widely used, automatically recognizes day/night Graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu display and operation Humanized design of browser interface, for convenience of operation Full control parameters setting and modification, diversified load control mode Gel, Sealed and Flooded battery type options Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve battery life Electronic protection from overheating, overcharging, over discharging, over load, and short circuit. Reverse protection: any combination of solar module and battery Download Catalogue Send Enquiry Patent/Trademark Information: Trademark TM Design Registration No Copyright © Su-Kam Power Systems Ltd. Technology Patent Patent Protected

Solar Charge Controller 15Amp/12V-24V-48V  PWM Technology Su-Kam’s Solar Charger Controller is a system with advanced MOSFET based PWM Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated one within a battery pack, battery-powered solar device or a battery recharger.  The controller is for off-grid solar systems. This protects the battery from getting over charged using the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance.  The comprehensive self-diagnostics and electronic protection functions prevent damage from installation mistakes or system faults. Features: Excellent EMC design Nominal system voltage automatic recognition High efficient Series PWM charging, increases battery life and improves the solar system performance Use MOSFET as an electronic switch, without any mechanical switch Widely used, automatically recognizes day/night Graphics dot-matrix LCD screen and HMI (human-machine interface) with 4 buttons, integrated menu display and operation Humanized design of browser interface, for convenience of operation Full control parameters setting and modification, diversified load control mode Gel, Sealed and Flooded battery type options Adopt temperature compensation, correction algorithm for charging and discharging parameters automatically and improve battery life Electronic protection from overheating, overcharging, over discharging, over load, and short circuit. Reverse protection: any combination of solar module and battery Download Catalogue Send Enquiry Patent/Trademark Information: Trademark TM Design Registration No Copyright © Su-Kam Power Systems Ltd. Technology Patent Patent Protected

Solar Charge Controllers Su-Kam’s Solar Charger Controller is a system with advanced MOSFET based PWM Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated one within a battery pack, battery-powered solar device or a battery recharger.  The controller is for off-grid solar systems. This protects the battery from getting over charged using the solar module and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance.  The comprehensive self-diagnostics and electronic protection functions prevent damage from installation mistakes or system faults. Protection against various parameters:           Solar /battery reverse polarity.           Reverse current flow battery to solar array during night           Over charging current and short circuit.           Output over voltage           Excessive temperature of heat sink Features:           Intelligent microprocessor control           Silent, solid state pulse Width Modulation (PWM Charging) process            Electronic over current protection             Real time sensing of voltage and current to optimize charging Applications:           Solar portable light           Solar Home systems           Roof top solar solutions Terms & Conditions: Warranty:   All goods sold under warranty will be repaired or replaced by their respective service  centers  as per their policy. Warranty shall be termed void

Solar Charge Controllers Su-Kam’s Solar Charger Controller is a system with advanced Technology. The term “charge controller” refers either to a stand-alone device or a control circuitry integrated within a battery pack, battery-powered solar device or a battery recharger. This photovoltaic charge controller is the key component