Solar panel controller mobile

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar.

SOLAR CHARGE CONTROLLER  12V  6 A  WITH METAL BODY WITH INDICATION SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE   This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. IF U GOT ANY PROBLEM PLEASE CALL TO THIS NUMBER ,  BEFORE CONTACTING , WE CAN SOLVE THE PROBLEM..:)

SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads. (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)  -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load.

MAXEL Solar charge controller 12v 5 amps, high effencity low price support upto 70 watts solar panel About This Product high quality 5 amp solar charge controller FOR 12 V SOLAR SYSTEM HIGH VOLTAGE PROTECTION BY DUAL FUSE SIMPLE TO INSTALL SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1) TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2) NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3) TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE A charge controller limits the rate at which electric current is added to or drawn from electric batteries. It prevents overcharging and may prevent against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining ("deep discharging") a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. A solar charge controller is needed

ABOUT THIS PRODUCT   high quality20 amp solar charge controller FOR 24V SOLAR SYSTEM HIGH VOLTAGE PROTECTION BY DUAL FUSE SIMPLE TO INSTALL SUPPORT UPTO 600 W SOLAR PANEL   SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)  TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)  NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)  TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE A charge controller limits the rate at which electric current is added to or drawn from electric batteries. It prevents overcharging and may prevent against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining ("deep discharging") a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. A solar charge controller is needed

ABOUT THIS PRODUCT   high quality 5 amp solar charge controller FOR 12 V SOLAR SYSTEM HIGH VOLTAGE PROTECTION BY DUAL FUSE SIMPLE TO INSTALL   SOLAR CHARGE CONTROLLER HAS MAINLY THREE BASIC FUNCTIONS 1)   TO LIMIT THE VOLTAGE FROM THE SOLAR PANEL AND REGULATE THE SAME SO AS NOT TO OVERCHARGE THE BATTERY 2)   NOT TO ALLOW THE BATTERY TO GET INTO DEEP DISCHARGE MODE WHILE DC LOADS ARE USED 3)   TO ALLOW DIFFERENT DC LOADS TO BE USED AND SUPPLY APPROPRIATE VOLTAGE A charge controller limits the rate at which electric current is added to or drawn from electric batteries. It prevents overcharging and may prevent against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining ("deep discharging") a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. A solar charge controller is needed

1. 10 Wp SOLAR POWER PACK 12V/10Wp   2.  Battery Bank 12 V/ Ah EXIDE              3.  Led Lights - Two  3WATT LED DC LIGHTS.   4.  Back up  Full System Back up for 11 hours   5.  Inbuilt CFL holder, mobile charging with an AC Mobile Charging switch.   Warranty - 25 years Solar Panel warranty.                     1 year batery warranty by EXIDE.                     1 year System warranty.

1. 10 Wp SOLAR POWER PACK 12V/10Wp   2.  Battery Bank 12 V/ Ah EXIDE              3.  Led Lights - Two  3WATT LED DC LIGHTS.   4.  Back up  Full System Back up for 11 hours   5.  Inbuilt LED LIGHT and  CFL holder, mobile charging with an AC Mobile Charging switch.   Warranty - 25 years Solar Panel warranty.                     1 year batery warranty by EXIDE.                     1 year System warranty.

1. 10 Wp SOLAR POWER PACK 12V/10Wp   2.  Battery Bank 12 V/ Ah EXIDE              3.  Led Lights - Two  3WATT LED DC LIGHTS.   4.  Back up  Full System Back up for 11 hours   5.  Inbuilt CFL holder for mobile charging with an AC Mobile Charging switch.   Warranty - 25 years Solar Panel warranty.                     1 year batery warranty by EXIDE.                     1 year System warranty.

1. 10 Wp SOLAR POWER PACK 12V/10Wp   2.  Battery Bank 12 V/ Ah EXIDE              3.  Led Lights - Two  3WATT LED DC LIGHTS.   4.  Back up  Full System Back up for 11 hours   5.  Inbuilt CFL holder for using with an AC Mobile Charging   Warranty - 25 years Solar Panel warranty.                     1 year batery warranty by EXIDE.                     1 year System warranty.

It is important to verify the wattage of any panel based on datasheet before considering a purchase. Here are the Simple Tests to confirm Wattage for 12v applications with PWM Solar charge controller before you order;   Test1:    Number of Cells, If it is 36 –  OK Test2:    Ask Vmp. If it is a fixed value between 17v to 18v -  OK  (Because  e ach cell is supposed to be approximately 0.5V) Test3:    Ask Imp.  If it is fixed value between   to A for 20Watt Panel. - OK Test4:    Multiply Vmp with Imp. If it comes to 20W  –  OK (i.e. 17V X Amp = 20 Watt or 18V X Amp = 20Watt) 20 W panel is 36 cell, Vmp of 17V-18V, Imp of A-Amp and 17V X Amp = 20 Watt, and 18V x Amp = 20 Watt Solar Charger Controller 12V/6A PWM Solar Charge/Charger Controller with Mobile Charger 2yr warranty Series solar charge controllers are used

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.rajivihaan.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Please contact us at    or visit our website for more details:  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 10Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 120W, but preferably  100W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com

Visit Rajivihaan shop on e-Bay  http://stores..in/rajivihaan   for other Solar, DC, or AC-DC Energy Efficient Products and Solutions. Click here for rajivihaan shop http://stores..in/rajivihaan Please contact us at    or visit our website for more details:  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 5Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 60W, but preferably  50W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Please contact us at    or visit our website for more details:  www.gaonsegaon.com

Visit Rajivihaan shop on e-Bay http://stores..in/rajivihaan for other Solar, DC, or AC-DC Energy Efficient Products and Solutions   Contact us at   for any additional information, or visit  www.gaonsegaon.com RAJIVIHAAN - SOLAR CHARGE CONTROLLER (SCC) FOR  DC LOADS - 12V, 20Amps - DC Out. Recommended Solar Panel Connectivity -  Maximum 240W, but preferably  200W or below -  This 12V SCC is to be used only to charge 12V DC batteries or to serve 12V DC Devices or 12V DC Loads.  (It does not serve AC devices,  or AC Load. It does not serve 24V DC or 48 V DC devices.)   -  Function is to manage and control the Solar DC charge to batteries connected to the Charge Controller and give 12V DC out to serve DC Loads.  This enables proper and balanced charge to batteries through Solar, and thus protect the batteries from situation of extra current. This also enables stable 12V DC output from SCC to serve as input to 12V DC devices.  - The Solar Charge Controller (SCC) is connected to Solar Panel as well as Battery and Load. -  When Solar power is available, the Solar Charge Controller first serves the load and remaining power from Solar Panels is used for charging the battery, which allows for Zero Running Cost Solar Power to charge the battery at rated power, and also protects the battery from faster than recommended charging, thus retaining life of the battery.  The DC Load is also served giving preference to Solar. Mode of Operation:- In case Solar power more than Load, then Solar Power serves the DC Load, and differential power charges the battery. In case Solar power less than Load, then Solar Power serves the DC Load, and differential power is drawn from battery discharge. When Solar is not available, then battery is discharged to serve the DC Load. Contact us at   for any additional information, or visit  www.gaonsegaon.com