Stereo amplifier

Stereo Amplifier Module based on TDA7379 Compact PCB based on TDA7379 Supply Voltage operating maximum DC 22 V  HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD ALSO AVALABLE 6 Channels of TDA7379 (3 IC in single board for 5.1 setup). Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

  Hi-Fi Stereo audio amplifier module: 2X  TDA2030         Features: 18 Watts+ 18 Watts RMS maximum. Wide-range supply voltage, up to dual 18 Volts DC  100K OHM INPUT IMPEDANCE. X 46 Gain. Short-circuit protection to ground Thermal shutdown Heatsink needed. Description: The TDA2030 is a monolithic integrated circuit in  the Pentawatt ® package, intended for use as a  low frequency class-AB amplifier. Typically it  provides 14 W output power (d = 0.5%) at 14 V/4 Ω. At ±14 V or 28 V, the guaranteed output  power is 12 W on a 4 Ω load and 8 W on an 8 Ω  The TDA2030 provides high output current and  has very low harmonic and crossover distortion. Furthermore, the device incorporates an original  (and patented) short-circuit protection system  comprising an arrangement for automatically  limiting the dissipated power so as to keep the  operating point of the output transistors within  their safe operating range. A conventional thermal  shutdown system is also included. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.       

Cambridge Audio, Topaz AM10 Amplifier, 31/2 Years old, very good working condition, With Remote Control

HIGH OUTPUT POWER CAPABILITY 2 x 38W/4Ω @18V, 1KHz, 10% 2 x 20W/8Ω @18V; 1KHz, 10% 2 x 34W/8Ω @ 22V, 1kHz, 10% ■ MINIMUM EXTERNAL COMPONENTS  COUNT: – NO BOOTSTRAP CAPACITORS – NO BOUCHEROT CELLS  – INTERNALLY FIXED GAIN (26dB BTL) ■ ST-BY FUNCTION (CMOS COMPATIBLE ■ NO AUDIBLE POP DURING ST-BY  OPERATIONS ■ DIAGNOSTIC FACILITIES  – CLIP DETECTOR  – OUT TO GND SHORT –OUT TO VS SHORT – SOFT SHORT AT TURN-ON – THERMAL SHUTDOWN  Protections: ■ OUPUT AC/DC SHORT CIRCUIT – TO GND –TO VS – ACROSS THE LOAD ■ SOFT SHORT AT TURN-ON ■ OVERRATING CHIP TEMPERATURE WITH  SOFT THERMAL LIMITER ■ FORTUITOUS OPEN GND ■ REVERSED BATTERY ■ ESD Based on a fully complementary PNP/NPN  configuration, the TDA7379 allows a rail to rail  output voltage swing with no need of bootstrap  capacitors. The extremely reduced boundary  components count allows very compact sets. Assembled on high quality glass epoxy pcb, with high quality capacitors,  Attach to a larger heatsink (or metal cabinet) for proper cooling. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

Nakamichi Stereo amplifier & Cd player with remote for sale in excellent condition Only serious Buyers call Timepassers Kindly Excuse. Description The IA-2 with Nakamichi's exclusive Harmonic Time Alignment circuitry delivers an extraordinary 55 watts per channel into 8 ohms. It is constructed using nothing but the finest components, selected for use only after extensive testing and evaluation. As with the IA-1, the preamplifier section is fully discrete, and the power amplifier section is capable of a hefty 16 amperes of peak current, which makes robust, distortion free listening possible with virtually any loudspeaker. Specifications Power output: 55 watts per channel into 8 ohms (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.1% Input sensitivity: mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 70dB (MC), 82dB (MM), 105dB (line) Weight: 12.5kg

Akai stereo amplifier, cassette tape deck. selling matching Akai components: Amp, tape deck, and including (graphic equalizer are optional) Deck: CS-M01A, for rs. Amp: AM U-01, for rs, This is an excellent Integrated Amplifier all in working condition, Both amp and deck are in perfect working order... Very good cosmetic conditions... amp would be fine to drive efficient tower speakers. these are awesome unit. (graphic equalizer are optional) also available akai Equalizer: EA-A22 for rs.. Audition welcome SERIOUS BUYER ONLY simply call for details on cell:

Onkyo Integra Stereo Amplifier 100 Watts Per Channel 18 kg weight Hi END AMPLIFIER Sanjay /// Salem

Harman kardon hk-6200 very powerful stereo amplifier.out put is only 50+50w rms but very easily drive up to 200w amplifiers.!.powerful bass and treble.good cosmetic condition.made in japan.one of the best product from Harman international. Specifications: Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 0.5Hz to 150kHz Total harmonic distortion: 0.09% Damping factor: 60 Input sensitivity: 2.2mV (MM), 135mV (line) Signal to noise ratio: 80dB (MM), 98dB (line) Speaker load impedance: 4Ω (minimum) Dimensions: 443 x 103 x 361mm Weight: 7.5kg price fixed

100 Watt Per channel Stereo Amplifier, bare PCB (2x TDA7294 bridged) Reference design, No frills. Highly stable due to good layout. 2 nos of TDA7294 in noninverting configuration using dual 36 to 40 Volts (center tapped) PCB Dimensions:  143mm x 50mm Very high quality Pcb. Single sided Glass epoxy; Green masked, tinned pads with legend printing. Full schematics; Bill of Materials, wiring diagram will be provided. IC is available at extra cost. Suitable power supply rectifier board also available for easy assembling. Very versatile Pcb, TDA7293 can also be used. PLEASE CONTACT for more details. Email:  sivankls@gmail.com   Whattzapp: 9400580684   Contact for Discount /Offers on 9400580684 whatsapp or SMS only  Available high quality audio grade Polyestor Capacitor's, Low Noise IC's. Assembled Audioamplifier: Mosfet & Transistor based upto 1000Watts RMS. Preamplifiers: Mono, Stereo, Bridge drivers, Balanced, Unbalanced. Line drivers: Microphone preamplifiers with ECHO. Tone controls High Quality Low noise (Bass, Mid,Treble, Balance, Volume, input selector, Loudness switch etc Loudspeaker protection. Transformer soft Start. Will post the above items on request.

YAMAHA A-500 NATURAL SOUND STEREO AMPLIFIER - USED GOOD Power output: 70 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.005% Damping factor: 50 Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line) Signal to noise ratio: 76dB (MC), 92dB (MM), 100dB (line) Channel separation: 55dB (MM), 60dB (line) Output: 150mV (line) Dimensions: 435 x 112 x 327mm Weight: 7.3kg USED UNIT IN VERY GOOD WORKING CONDITION

Akai integrated stereo amplifier in prefect working condition, AM U01. great sound quality. 100% working order. Audition welcome. truly interested buyers can call on cell.

It's a Arcam alpha series 40 wpc in to 4 channel stereo amplifier in a flawless condition wanna sell as I ve already upgraded my system. It's made in england

Denon PMA-860 stereo amplifier to sell, 80w RMS/ ch. good condition. no bargain,

Panasonic 3.in 1 stereo amplifier/Radio/tape with ok condition

Yamaha 5.1 stereo amplifier, gently used, good working condition,

Nad 326 bee stereo amplifier one and half year old excellent condition with bill only for 30000

Onkyo Stereo Amplifier// with REMOTE BRAND NEW CONDITION 100 WATTS RMS per channel at 8 OHMS SANJAY ///SALEM ///TAMIL NADU (shipping is possible)

Marantz PM7005 stereo amplifier in immaculate condition, like new with remote. Only Two years old. Less used.

Pioneer A109 Stereo amplifier Phono input Good working conditions Cont joe audio exotics Chennai

Pioneer A676 reference stereo amplifier Japan make Vintage collection Good working Cont joe audio exotics Chennai

It is 10 months old new like Amplifier. First owner. Award winning amp. Complete box. contact me for any query. Only interested buyer. Description Product Description The new PM6004 Integrated Amplifier delivers a remarkable combination of power and finessein stylish package that's as convenient as it is luxurious. The PM6004 offers up all of the detailand harmonic balance that Marantz is famous for, and adds control options that insure easyintegration with today's systems. In the spirit of our Reference Series components, a Torroidal transformer anchors an all new power supply that feeds a Current Feedback Amplifier. Fiveline inputs and two line outputs insure connectivity with all your cherished source components;and there's an all-discrete moving magnet phono stage for your turntable too! From the Manufacturer With its impressive array of inputs and outputs, the Marantz PM6004 Amplifier offers an ideal way to consolidate all of your audio devices. The amplifier features exceptional audio engineering, allowing it to amplify sound without loss of fidelity or balance. It also has a phono input, so you can enjoy music from your turntable on traditional stereo speakers. And with Marantz's audio technologies, this device is sure to please even the most discerning listeners. Marantz PM6004 Amplifier AT A GLANCE: Discrete preamp and power amplification circuits offer superior audio performanceFive line inputs and two line outputs allows connectivity with multiple devicesPhono input for connections to turntablesIntuitive control panel and remote control provide easy access to basic functionsThree-year warranty Exceptional audio engineering amplifies sound without loss of fidelity or balance.. Full palette of audio inputs and outputs are ideal for connecting a wide variety of audio devices.. Superior Components for Clean, Crisp Amplification The PM6004 Amplifier features audiophile-grade engineering. Individual components and circuit topologies have been carefully selected to ensure a clear, faithful amplification of your music. In addition, the preamp and power amplification sections are discrete--an ideal design for low noise and low distortion performance. Premium Technologies for Stunning Audio Performance Marantz has equipped the PM6004 with several high-performance technologies to further improve audio quality. The amplifier features Marantz's current feedback circuit technology, which gives it an exceptional through-rate and enhances sonic clarity. Additionally, a low impedance toroidal transformer anchors a regulated power supply to provide quick and ample current on demand to preserve the fidelity of your favorite performances. Multiple Inputs and Outputs for Extensive Connectivity The PM6004 features a full palette of audio inputs and outputs for connecting with a wide variety of audio devices. It features five line inputs and two line outputs, a phono input, and two sets of gold plated binding posts. Finally, the RC-5 input and output enables one-button turn-on and control of Marantz source components like the new CD6004, using only the included PM6004 remote control. Easy, Intuitive Control Panel and Remote Control The PM6004 is exceptionally easy to use thanks to an intuitive control scheme. The front panel provides quick access to basic controls, such as power and volume. An input selector knob allows you to seamlessly switch between input devices, while bass, treble, and balance knobs let you tailor sound balance to your liking. The amplifier also features a loudness mode, which can be toggled at the push of a button. The included remote control provides another easy way to control amplifier functions. The Marantz PM6004 Amplifier is backed by a three-year limited warranty. What's in the Box PM6004 Amplifier, remote control, and user's manual.

Sansui AU-D7. DD/DC stereo integrated amplifier in immaculate condition. Clean pc with clean sound. Only serious buyers call. Timepassers kindly Excuse. Specifications Power output: 80 watts per channel into 8 ohms (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.02% Damping factor: 200 Input sensitivity: 0.25mV (MC), 2.5mV (MM), 200mV (line) Signal to noise ratio: 67dB (MC), 86dB (MM), 110dB (line) Channel separation: 55dB (MM), 90dB (line) Output: 200mV (line) Speaker load impedance: 8Ω (minimum) Dimensions: 430 x 148 x 328mm Weight: 11.3kg

Ships within 12 Business Days. Genuine Import from USA. First we designed the UAM2, the extremely popular audio amplifier module that provides 20 watts of clean audio with virtually no heat... or heatsink! People loved it, and "stuck" them everywhere, from the back of speakers to inside their custom equipment to drive speakers. Last year saw the introduction of the "big brother" of the UAM2, our UAM4. The UAM4 upped the ante; this little 2.5" board provided 42 watts of stereo from a single SMT device! Just like the UAM2, people fell

AKAI Vintage Stereo Intergated Amplifier very good condition. Great sound quality. AM U-110, Made in Japan. * Phono,Tuner, Aux, Tape * Loudness * Tone defeat * Headphones out * Speaker load impedance: 4~16 Ohm Audition welcome SERIOUS BUYER ONLY simply call on cell phone for details

Harman kardon hk 6550 review stereo Mobile: 98419/10883 Specifications Power output: 50 watts per channel into 8Ω (stereo) Frequency response: 1Hz to 150kHz Total harmonic distortion: 0.1% Damping factor: 69 Input sensitivity: 0.12mV (MC), 2.2mV (MM), 135mV (line) Signal to noise ratio: 76dB (MC), 80dB (MM), 81dB (line) Dimensions: 443 x 134 x 359mm Weight: 9.2kg

Sale for Dual stero integrated amplifier. Made in Germany.excellent sound quality smooth sound good images and detailed tone

1. Metallic FM amplifier 2. Heavy sound 3. Clear sound 4. Can be used in car, auto with battery of 12 V. 5. Can attach extra speaker. 6. The image is not actual.

Sony Amplifier 110 wat Best for Phono output Made in malaysia with remote System in new condition

DENON UDRA-M7 high Quality Stereo Receiver Brand New Exellent Working Condition Specification UDRA-M7 or D-M7 and its default two (2) speakers rated at 80watts/6 ohms each. I want to extend or add speakers to this setup, I have two(2) extra Bose speakers rated at 45watts/6ohms.

Power output: 30 watts per channel into 8Ω (stereo) Frequency response: 15Hz to 30kHz Total harmonic distortion: 0.08% Damping factor: 40 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 75dB (MM), 80dB (line) Output: 150mV (line) Semiconductors: 8 x IC, 13 x transistors, 23 x diodes, 18 x LED Dimensions: 330 x 101 x 240mm Weight: 5.4kg