Supply jal board

Positive Power Supply Board - 5V Description Positive power supply board. Its basically takes an input of 7-20V AC or DC and outputs a constant voltage of 5V. It can supply a maximum of 1A of current at 5V.   The board comes with appropriate rectification, filtering circuit, a power indication LED and mounting holes for easy mounting.   The Power Supply Mini Board is the ideal solutions, providing a postive supply at constant out for projects & systems etc.     Feature Suitable for 7-20V AC/DC input with PCB Terminals Power LED for Outputs +5V Output Termination Points Suitable for use with most +5V Microcontrollers

Variable Power Supply Board - 1.5V to 12V Description Variable power supply board. Its basically takes an input of V AC or DC and outputs a voltage between 1.5V to 12V. It can supply a maximum of 1A of current at 12V.   The board comes with appropriate rectification, Variable resistor/Preset for output voltage setting, filtering circuit, a power indication LED and mounting holes for easy mounting.   The Power Supply Mini Board is the ideal solutions, providing a postive supply at constant out for projects & systems etc.     Feature Suitable for V AC/DC input with PCB Terminals Power LED for Outputs Variable Preset for different output voltage selection. 1.5V to 12V Output Termination Points 60 x 50 mm PCB size   Powered by Turbo Lister

This is L293D based H-Bridge motor driver board for driving DC motors and is ideal for robotics applications. PTR CONNECTORS FOR EASY CONNECTIONS USER ACCESSIBLE MOTOR ENABLE PINS FACILITY ON BOARD V POWER REGULATOR, NO NEED TO GIVE EXTERNAL 5v POWER SUPPLY ON BOARD POWER LED AND POWER ON OFF SWITCH WIRE CONNECTOR FOR INPUT SIGNAL

Package Contents 1 x L298N DC Driver Controller Stepper Motor smart Car Board Module Dual H Bridge DC Motor Driver Arduino PIC, Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC    Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V    Driven part of the peak current Io: 2A    The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)    The logical part of the operating current range: 0 ~ 36mA    Storage temperature: -25 Deg C ~ +130 Deg C    Other Extensions: control of direction indicators, the logic part of the plate to take power interface. Driver Board Size: 55mm * 60mm * 30mm    Drive plate Weight: 33g    Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.     Shipment Details We ship the item from our side on the same day or on the next working day after receiving payment. Any Taxes or Octroi charged

http://acdc-adapter.com/asus-ve205-vw245h-4h0uh02a00-4h0uh02a01-power-supply-board-p-35895.html Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board larger image $29.99 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $26.99 5 - 9 $25.49 10 - 19 $23.99 20 - 199 $22.49 200 + $21.59 Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Asus VE205 VW245H 4H.0UH02.A00 4H.0UH02.A01 Power Supply Board Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number: 4H.0UH02.A00 4H.0UH02.A01 Compatible model: Asus VE205 VW245H

http://acdc-adapter.com/genuine-samsung-bn4400261b-la32b530p7r-power-supply-board-p-35849.html Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board larger image $75.55 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $67.99 5 - 9 $64.22 10 - 19 $60.44 20 - 199 $56.66 200 + $54.40 Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Genuine Samsung BN44-00261B LA32B530P7R Power Supply Board Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Part Number: BN44-00261A BN44-00261B H32F1_9DY Compatible Model : Samsung LA32B530P7R

http://acdc-adapter.com/acer-al1715-al1912-power-supply-board-ar577-vp583-al1914-p-35970.html Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 larger image $29.99 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $26.99 5 - 9 $25.49 10 - 19 $23.99 20 - 199 $22.49 200 + $21.59 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Acer AL1715 AL1912 Power Supply Board AR577 VP-583 AL1914 Condition: Brand new Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Credit card Compatible part number:AR577 VP-583 AL1914 Compatible model:Acer AL1715 AL1912

http://acdc-adapter.com/hp-l1506-hstnd2a06-power-supply-board-715g15083-715g15082-p-36011.html HP L1506 HSTND-2A06 Power Supply Board 715G1508-3 715G1508-2 HP L1506 HSTND-2A06 Power Supply Board 715G1508-3 715G1508-2 larger image $45.55 Buy More With Wholesale Price,Save More.UP to 50% off!!If you are not satisfied with wholesale price when you make a large order,please email us. Buy Quantity Discount Price 2 - 4 $40.99 5 - 9 $38.72 10 - 19 $36.44 20 - 199 $34.16 200 + $32.80 HP L1506 HSTND-2A06 Power Supply Board 715G1508-3 715G1508-2 Genuine HP L1506 HSTND-2A06 Power Supply Board 715G1508-3 715G1508-2 Condition: Brand Genuine, tested 100% work Available: In Stock Warranty: 1 year warranty Payment: PayPal, Compatible part number: 715G1508-3 715G1508-2 Compatible model:HP L1506 HSTND-2A06

Product Description The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential. Using L298N made by ST company as the control chip,the module has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Features: Driver: L298N Dual H Bridge DC Motor Driver IC   Driven part of the terminal supply area Vs: +5 V ~ +35 V; such as the need to take power within the board, the supply area Vs: +7 V ~ +35 V   Driven part of the peak current Io: 2A   The logical part of the terminal supply area Vss: +5 V ~ +7 V (can take power within the board +5 V)   The logical part of the operating current range: 0 ~ 36mA   Storage temperature: -25 Deg C ~ +130 Deg C   Other Extensions: control of direction indicators, the logic part of the plate to take power interface.Driver Board Size: 55mm * 60mm * 30mm   Drive plate Weight: 33g   Other Function: Control the direction indicator, power indicator, current detection, the logic part of the board to take power interface.The L298N driver module, using ST's L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface can 5V single-chip circuitry to supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential.

Micro SD Storage Board adap Micro SD TF Card Memory Shield Module SPI Fr Arduino Description 1 Support Micro SD Card, Micro SDHC card (high-speed card)  2 The level conversion circuit board that can interface level is 5V or 3.3V  3 Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board  4 Communication interface is a standard SPI interface  5 4 M2 screw positioning holes for easy installation  6 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;  7 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply  8 Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal  9 Micro SD card connector: yes since the bomb deck for easy card insertion and removal  10 Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination  11 Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is SPI bus, CS is the chip select signal pin  V voltage regulator circuit: LDO regulator output is 3.3V level converter chip, Micro SD card supply  13 Level conversion circuit: Micro SD card into the direction of the signal is converted to 3.3V, MicroSD card interfaces to control the direction of the MISO signal is also converted into 3.3V, general AVR microcontroller system can read the signal;  14 Micro SD card connector: a self- bomb deck, easy card insertion.  15 Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination; Package Info 1Pc X Micro SD Storage Board  Feedback Info We Provide Optimum Quality and Fast Shipping which is self explanatory by Review others have given us please have look if you have any question of doubt. Our Prices are the Cheapest on E-bay, If you find any of our item Selling at cheaper price then Message us the details and we would provide you at same price. For providing such services many individuals and department of ours are working very hard  24hr X 7 X 365 days, and we look for token of appreciation for all this by providing us with positive feedback. For Any Technical Assistance and Guidance Please Post on Our Forum www.sonishop.com/forum We would get back to you for same.

With this board you can develop and prototype with ATMEGA16/ATMEGA pin) microcontrollers. The RS232 driver on board allows easy connection with PC or other embedded hardware. The board have User buttons and status LEDs. The bridge rectifier allow this board to be powered with both AC and DC power supply adapters.   FEATURES AVR Development Board for Atmel ATMEGA ISP Socket for Flashing On board Regulated Power Supply 5v,12v supplys Easy to test with Burg Connecters wires An RS232 Serial Port 7Seg Mulitplexed Display DC Power Supply Connector(12v Ac or Dc) READY INTERFACE For LCD display 2linex16Character 24Cxx (I2C) (EEPROM) RTC (DS LED array Matrix Key Pad 4 Interrupt Switches +12v Relay (one) Package Content   AVR Development Board (WITH CHIP MAX232) Burg Connecters 20 Nos Female to Female.

Product Description Miniature digital power amplifier board 2 * 3 w class D power amplifier board high 2.5 ~ 5 v can be USB power supply Shipped via powership. Fast ship - Bluedart/Fedex/DHL/Aramex Features: Miniature digital power amplifier board 2x3w class D power amplifier board, Can work on USB power supply. Good noise suppression Input audio should be via sheilded wire Dual channel stereo output 3 w + 3 w power Works with 5v power supply can directly drive 4 Ω/8 Ω small speakers big output power, sound quality is good. Unique without LC filter class D digital power board can use computer USB power supply directly Double panel wiring, super mini design, can easily fit

LMTF AMP board KIT+Rectifier filter power KIT + Tone control Kit Introduction:   LM is a single channel high-performance Stereo power amplifier IC produced by National Semiconductor Corporation(NS).The maximum continuous output power is up to 60W.From the Introduction till now,it's widely loved by vast audio fans     This power amplifier adopts power board & amplifier board Independent design,for the amplifier part,each channel shares one circuit board,every set includes one power board & 2 single channel power amplifier boards.  All the components on the board are carefully selected,uF/63V capacitors as filter capacitors,35A large current rectifieer bridge,can ensure the powerboard long-term full load working.Other capacitors choose Epcos, Keltron, etc. famous brand capacitors.1% copper pin film resistors. The PCB board adopts single side circuit board, Black boars,reasonable layout design,looks beautiful & generous. In Package  2 X LM mono boards 1 X Hi Fi Tone control board 1 X uf 63v power supply board 1 X 15v regulated power supply board 

This is a mini 2 channel 3w amplifier with PAM. It is perfect for MP3/MP4/notebook. And you can also power the board with 5V USB power supply Specifications: Power supply: DC 2.5V - 5.5 V Output power: 3W + 3W (4Ω) Size:  3 x 2.2mm (L x W) Flexible assembly usage NOTE: Single lithium battery or USB power supply is suitable, can also use four sections of 1.5V battery, if used with the transformer power supply, you must add 5V voltage circuit as more than 6V it will burn IC out + and - of power supply can't be reversed, power supply voltage should not be more than 6V, otherwise it will damage the IC There are high gain buffers, can't change any board device parameters, IC will lead to damage. Please use input shielding wire, can rise anti-interference function, eliminate clutter current sound. Output is CMOS BTL drive mode, 4 wire is completely independent, do not connect together Package Contents: 1 x 5V 2 channels 3W PAM Audio Amplifier with Volume control  

Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Description: Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal. Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm, easy to install positioning, to achieve inter-module combination; Specifications: Power supply:4.5V - 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size:45 x 28mm Net weight:6g Package weight:16g   Package Included: 1PCS*Micro SD Storage Board Mciro SD TF Card Memory Shield Module SPI For Arduino New Welcome to ask any question Mob- , Email Your feedback is important for us to grow our business on , so please  leave Positive feedback Leaving Negative or Neutral Feedback will not solve a problem, so please contact us if you have any questions or any complaints before leaving a Feedback