Tda mono amplifier kit

TDA MONO amplifier kit it is mono channel amplifier it works on amp supply it's pure 60watts amplifier u can use it as subwoofer power amp

2.1 AUDIO AMPLIFIER KIT IT CONTAINS STK STK & TDA IC USED FOR SUBWOOFER MONO CHANNEL & USED FOR SUUROUND CHANNEL It works on v – 3amp or 5amp supply total power output is 180 watts rms It’s more than watt pmpo kit is ready to use for 2.1 purpose It has bass treble kit with tone controls input & output connector   In case if you have any query, please feel free to contact us. 

This a True 70w RMS Audio Amplifier, Needs a Transformer, 3 Amp. You can run it using a 12v battery too, Just short the two 12v and use them as one. W PMPO is less than 120W RMS, You can verify this from any Amp Maker. Product Description High Power 70w RMS output. The best part about the kit is that it is made of individual components and IC's. Also all the power-supply components are built in, Simply need to add a Transformer and it will work. Comes with pre integrated Volume, Bass and Terrible controller. The primary IC for this board is Philips TDA. If you do not understand any thing about wattage simply calculate the power of the Transformer to verify it. means 24v with center tap. Now 24v 3Amp is 72w RMS. So you can be sure that the device that you buy will give you more than 70w Pure RMS and NOT CHEAP PMPO. Also this Kit can officially drive up to 70w. So when you Buy a AMPLIFIER instead of asking the seller about the wattage, simply ask for the transformer inside the amp. And Multiply Voltage and Current to get the wattage consumption of the device. The dimension of the kit is 12x6x4 Cms. For sale is only the Amplifier. No transformer is included

1.6W Mono Audio Amplifier kit is based on TDA, which is class AB power amplifier with a wide range of supply. Power supply: 5 ~ 12 VDC Output: 1.6 W, 4 Ohm / 1 W, 8 Ohm Low crossover distortion, soft clipping Onboard PRESET to adjust volume Terminal pins for connecting power supply, input and output ON/OFF PCB mounted slide switch for power supply Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 36 mm x 52 mm DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram  Note: KOTEQ offers custom design and modification services for most of our  products, please contact us  for  specific requirement.

6W Mono Audio Amplifier kit is based on TDA IC. Power supply input 14 VDC Output 6 W, 4 Ohm Input resistance 150 KOhm Very low harmonic and cross-over distortion IC built

Mini Stereo Audio Amplifier kit is designed for portable radio players and other building block projects.  It  is based on TDA IC. Power supply: upto 12 VDC Output: 1 W, 8 Ohm for 12 VDC / 20 mW, 32 Ohm for 3 VDC Input resistance 100 KOhm Low crossover distortion, Low quiescent current Onboard PCB mount 3.5 mm stereo jack for audio-in Onboard Presets to adjust volume Terminal pins for connecting power supply and outputs Power-On LED indicator Four mounting holes of 3.2 mm each PCB dimensions 41 mm x 56 m m DO IT YOUR SELF KIT (DIY) Kit contains components, PCB and Circuit Diagram  Note: KOTEQ offers custom design and modification services for most of our  products, please contact us  for  specific requirement.

12W Hi-Fi Audio Amplifier kit built around TDA IC, intended to be used as a low frequency class AB amplifier. Power supply input 24 VDC Output: 12 W, 4 Ohm Input resistance 5 MOhm Very low harmonic distortion (0.5%) and cross-over distortion IC built

The 10W + 10W Audio Amplifier kit, built around TDA IC, which is a class B dual audio power amplifier, specifically designed for car radio applications etc. Power supply input 15 VDC Output power: 2 X 6.5 W, 4 Ohm / 2 X 10 W, 2 Ohm IC built

TDAW Audio Amplifier Kit is a Low Frequency Class AB amplifier. Power supply upto 18 VDC Output power 12 W @ 4 Ohm, 8 W @ 8 Ohm TDA provides high output current Has very low harmonic and cross-over distortion Short circuit protection/Thermal shutdown system

LMTF AMP board KIT+Rectifier filter power KIT + Tone control Kit Introduction:   LM is a single channel high-performance Stereo power amplifier IC produced by National Semiconductor Corporation(NS).The maximum continuous output power is up to 60W.From the Introduction till now,it's widely loved by vast audio fans     This power amplifier adopts power board & amplifier board Independent design,for the amplifier part,each channel shares one circuit board,every set includes one power board & 2 single channel power amplifier boards.  All the components on the board are carefully selected,uF/63V capacitors as filter capacitors,35A large current rectifieer bridge,can ensure the powerboard long-term full load working.Other capacitors choose Epcos, Keltron, etc. famous brand capacitors.1% copper pin film resistors. The PCB board adopts single side circuit board, Black boars,reasonable layout design,looks beautiful & generous. In Package  2 X LM mono boards 1 X Hi Fi Tone control board 1 X uf 63v power supply board 1 X 15v regulated power supply board