Torque digital

This is the Savox SH-MG Super Speed Metal Gear Micro Digital Servo. Features: Over-spec refined design out performs ordinary micro size servo. The metal case design looks awesome and allows for cooler and smoother operating temps. Metal gears form a solid framework for precise control and operation. Strict production and quality control of plastic components. Savox servos are totally green Acirc - from materials to production these servos are environmentally friendly. Ideal for CCPM and Rudder on 450 class heli s and park flyer airplanes. Dimensions(mm): 22.8X12.0X25.4Weight(g): 14.0Speed(@4.8V sec Torque(@4.8V oz-in): 25.0Speed(@6.0V sec Torque(@6.0V oz-in): 30.6Gear: MetalBearing: 1BBCase: Aluminum21 Tooth SplineFrequency: hzPulse Width Frequency: Dimensions(mm): 22.8X12.0X25.4Weight(g): 14.0Speed(@4.8V sec Torque(@4.8V oz-in): 25.0Speed(@6.0V sec Torque(@6.0V oz-in): 30.6Gear: MetalBearing: 1BBCase: AluminumRunning current (at no load): 150 mA @ 4.8VRunning current (at no load): 180 mA @ 6.0VStall current (at locked): mA @ 4.8VStall current (at locked): mA @ 6.0VIdle current (at stopped): 5 mA @ 4.8VIdle current (at stopped): 5 mA @ 6.0VLimit angle: 220 Acirc deg Acirc plusmn 10 Acirc deg Connector wire gauge: iuml frac14 fnof 26 AWGConnector wire length: 250 Acirc plusmn 5 mmHorn gear spline: 21TControl system: Pulse width modificationAmplifier type: Digital ControllerOperating Travel: 90 Acirc deg (when acirc dagger Icirc frac14 sec)Neutral position: Icirc frac14 secDead band width: 5 Icirc frac14 secRotating direction: Clockwise (when acirc dagger Icirc frac14 sec)

This is the Savox SH-MG Super Speed Metal Gear Digital Servo. Features: super high resolutionWater-Resistant with 4 silicone sealsCoreless motor brings output performance to new levels - smoother faster and more efficient operation. The metal case design not only looks awesome but also allows for cooler and smoother operating temps. Savox servos are totally green Acirc - from materials to production these servos are environmentally friendly. Ideal as a rudder servo on and 700 class helis. Dimensions(mm): 40.3x20.2x37.2Weight(g): 56.4Speed(@4.8V sec Torque(@4.8V oz-in): 55.5Speed(@6.0V sec Torque(@6.0V oz-in): 69.4Gear: MetalBearing: 2BBCase: Aluminum25 Tooth Spline is compatible with Futaba servo hornsFrequency: hzPulse Width Frequency: Dimensions(mm): 40.3x20.2x37.2Weight(g): 56.4Speed(@4.8V sec Torque(@4.8V oz-in): 55.5Speed(@6.0V sec Torque(@6.0V oz-in): 69.4Gear: MetalBearing: 2BBCase: AluminumRunning current (at no load): 200 mA @ 4.8VRunning current (at no load): 250 mA @ 6.0VStall current (at locked): 2.4 A @ 4.8VStall current (at locked): 3.0 A @ 6.0VIdle current (at stopped): 5 mA @ 4.8VIdle current (at stopped): 5 mA @ 6.0VConnector wire gauge: iuml frac14 fnof 22 AWGConnector wire length: 300 Acirc plusmn 5 mmHorn gear spline: 25TControl system: Pulse width modificationAmplifier type: Digital ControllerOperating Travel: 100 Acirc deg (when acirc dagger Icirc frac14 sec)Neutral position: Icirc frac14 secRotating direction: Counterclockwise (when acirc dagger Icirc frac14 sec)Pulse width range: 800 acirc dagger Icirc frac14 secMaximum trav

Hitec HS-MG Micro Servo Digital MG BB Univ Plug Hitec digital servos combine durable metal gears and programmability to give your plane heli or car better performance with improved centering higher resolution and more holding power.Specs:Torque: Oz In (4.8 V 6.0 V)Speed: sec (4.8 v 6.0 v)Dimensions: 0.92 x 0.45 x 0.94 inWeight: 0.42 Oz Why you need digital servos!There s nothing standard about a digital!Accurate and reliable centering even

Hitec HS-MG High-Torque Digital Servo MG Coreless Univ Plu HS-MG Servo from Hitec RCDThe Hitec HS-79XX series is the second generation of programmable-circuitry servo which offers twice the resolution of Hitec s previous digital servos.With the optional HFP-20 Servo Programmer you will be able to activate the new overload-protection and resolution-mode settings.Specs:Torque: 172 Oz In @ 6VSpeed: 0.13 Sec @ 6VDimensions: 1.57 x 0.78 x 1.45 inWeight: 2.18 OzReplaces the HS-MG ServoWhy you need digital servos!There s nothing standard about a digital!Accurate and reliable centering even

If you're looking for the ultimate steering servo for your 1/5th scale truck or buggy, we have just the thing! The TrackStar TS-700MG is a large size digital servo featuring a metal gear train, coreless motor and a fast 0.18 sec transit time.  Add to that it's excellent performance and tricked out looks, and you have one outstanding steering servo for the price! Specs: Weight:  145g Size:  63mmx32mmx54mm Torque:  kg.cm (4.8V)  -  kg.cm (6.0V) Speed:  0.20sec/60deg (4.8V) - 0.18 sec/60deg (6.0V) Voltage:  v Type:  Digital Standard Gear Train:  Meta l Ball Bearing:  N2 Ball Bearing Lead Length:  265mm Plug:  JR/Futaba   Weight (g)                     145 Torque (kg)                   Speed(Sec/60deg)       0.18 A(mm)                           62 B(mm)                           60 C(mm)                           56 D(mm)                           28.7 E(mm)                           76 F(mm)                           42

This is a Hitec Digital Super Speed Metal Gear Programmable Servo that will work with Futaba J Hitec S JR and Airtronics-Z radio systems. FEATURES: EPA Speed Direction and Fail-Safe Programmable (see COMMENTS). MOSFET amplifier. Gold plated contacts. Three metal gears Dual ball bearings. Indirect drive long life potentiometer. High standing torque. Watertight and dustproof. Includes blue aluminum heat-treated servo arm (see COMMENTS). Works with fixed winged aircraft and helicopters up to 40 pounds 1 10th and 1 8th on- or off-road vehicles. YOU WILL RECEIVE: One digital high torque servo with 12 wire and S JR Air-Z connector One white small X-shaped servo horn. One red Large X-shaped servo horn. One white adjustable servo horn. One white off-set straight servo horn. One white disc servo horn. One blue aluminum heat-treated servo arm horn. Four 2 x 14mm mounting screw

This is the Associated XP Digital High Torque High Speed DS Servo with Coreless Motor. FEATURES: Metal gears Coreless motor offers smooth operation and fster response time Aluminum heat sink dissipates heat build-up for fade free performance Water and dust resistant YOU WILL RECEIVE: Associated XP Digital D Servo with JR type connector mm) long double servo arm Mounting hardware REQUIREMENTS: Installing

S Digital Surface Servo - High SpeedFEATURES: Ultra fast 0.08 second transit time with 166 oz-in of torque at 6vPrecise digital controlCoreless motor for extended motor life and provides smoother operationDual ball bearings provide less resistance for higher performance and longer lifeZ connectors are compatible with JR and Spektrum receivers8 inch 22 guage wireTitanium gears for maximum durability and reliabilityOverload protectionMounting lug hight optimized for surface applicationsFEATURES: The S combines the impressive ultra fast.08-second transit time with 167 ounces of torque and titanium gears. The coreless motor allows for extended motor life and a smoother operation. This performance along with the smooth precision of its dual ball bearing output shaft and titanium gears makes it the ultimate upgrade. Along with the Z connectors the S servo allows for compatibility with JR and Spektrum receivers. This servo is not recommended for 1 8 scale off-road applications.

The HS-MG is latest addition to Hitec s ever evolving digital servo line. With a custom designed programmable digital circuit and our unique Alumite MP gear train technology the HS-MG is ideal for applications that call for a small lightweight high speed high torque servo. Specifications Motor Type 3 Pole Ferite Bearing Type Dual Ball Bearing Torque v oz. ( kg.) Speed v second Size 1.3 x 0.7 x x 17 x 31) Weight 1.12 oz (32 g.)

The DES 448 BB MG Ultra thin Digital Wing Servo is an ideal combination of weight speed and holding power. Combined with heavy duty gear and SMT circuitry also the low deadband technology helps that you enjoy reliable accuracy and precision. DES 448 BB MG represents a remarkable value

This is the HS-MG Mighty Micro Servo from Hitec with Universal Connector. Connector is compatible with all modern receivers and wiring accessories. FEATURES: Lightweight and small ideal for small planes gliders electric heli and cars Metal gears Aluminum output gear Shock protected POT YOU WILL RECEIVE: One HS-MG mighty micro servo Two screws grommets and eyelets Two servo arms and one wheel SPECIFICATIONS: L: 29mm x W: 13mm x H: 30mm (1.14 x 0.51 x 1.18) Transit: 0.17 sec 60 Acirc deg (4.8V) 0.13 sec 60 Acirc deg (6.0V) Torque @ 4.8V: 3.6 kg-cm (50.0 oz-in) @ 6.0V: 4.3 kg-cm ( oz-in) Weight: 21.9g (0.77oz) COMMENTS: The following replacement parts are available Gea

Item was assembled from new oem parts to create an easy cost effective stock replacement part. Most of the time it will not come

The DES 131 Digital Micro Servo delivers maximum torque at minimum weight. The internal precision components of this digital servo have been designed for long life providing superior speed torque and precision for its class. DES 131 is the perfect choice for any R C indoor micro application. ZH type connectors and wire come with the servo unit. Digital servo featuring dynamic torque excellent speed superior response and holding torque. Programmable Digital Circuit and SMT circuitry. Supporting 616 micro s response depending on programming. Covering the wide range of frame rate 20 Hz400 Hz.

Featuring High torque type HCM 880 BB MG digital servo delivers excellent speed and performance. It includes optimized coreless motor and supports High torque of 20.0 kg # cm at the speed (0.07sec 60 deg). The low deadband technology and Graupner exclusive programmable digital circuit for reliable excellent performance will provide user satisfaction. The aluminum body will provide lower operating temperatures longer run times. Excellent dynamic torque and holding torque. Programmable Digital Circuit and SMT circuitry. Supporting 116 micro s response depending on programming. Covering the wide range of frame rate 20 Hz400 Hz.

The HSP 1/10 Drift car Ready to Run package comes with 4 wheel drive system, ESC with Forward and Reverse functionality, high torque 540 motor, Oil Filled Shock Absorbers, Aluminum Upper Chassis and Aluminum Drive Shaft, mAh battery with battery charger and a good quality 2.4Ghz digital remote control transmitter. The chassis was well engineered for best weight balance, a pure "Competition" ready platform. This car is made of high quality graphite mixed ABS, this enhances the strength of the car. It is not simply a toy, but a perfect RC vehicle for your entertainment or as a gift. Ready to run out of box! Feature 1. 4WD drive system 2. High precision motor RC 540 and ESC . Oil filled shocks 4. Big form front bumper provide extra protection 5. Skilled front steering system features quick turning response to whole vehicle. 6. 7.2v mAh Ni-MH battery 7. Long body posts are suitable for adjusting body level 9. Ready to Run Package Content 1. Fully assembled Ready to Race 1/10 Scale Electric Drift Car. 2. 2.4Ghz Radio Remote Control. 3. Australian Standard 240V Wall Charger. 4. NiMH 7.2V mAh Battery. 5. English manual. PS: The color of the car body and wheel rim may vary from the picture depends on the Our Warehouse Stock.  If you need specific color, please ASK BEFORE the order or state it clear